Solid Edge design tutorial using Synchronous Technology

No video

Solid Edge design tutorial using Synchronous Technology

Рет қаралды 9,622

Күн бұрын

This tutorial covers some of the basic tools in Solid Edge, showing how to create a simple block using synchronous technology.

Пікірлер: 20

@ukbb2632 2 жыл бұрын

5:12 that's a really cool feature. Most CAD packages you have to create a rotated plane and then draw on that.

@geoffh3431 3 жыл бұрын

very good tutorial hope there are more like this please.

@GauravDubeyji 2 жыл бұрын

thank u for the good tutorial... keep up the good work

@olivermsiska 7 ай бұрын

very helpuful tutorials,post more videos,sir

@greggray6839 2 жыл бұрын

Terrific, it’s been a lot of help

@cadcentralnz 2 жыл бұрын

Glad you liked it. If you have any requests on what you'd like me to cover, then let me know.

@greggray6839 2 жыл бұрын

@@cadcentralnz Thanks for your generous offer, I will check your other videos first but I made progress with my project today because of this video. I am making throttle bodies. They have various angles etc.

@cadcentralnz 2 жыл бұрын

@@greggray6839 Email on alan@cadcentral.co.nz with images or whatever you have if you want help

@greggray6839 2 жыл бұрын

@@cadcentralnz Again thanks, I am making progress, see how I go today. I offered to pay a recent mechanical engineering graduate to assist me but after one day he said it was “too hard”. I said I knew the first week would be hard but it would get easier as you become more familiar with Solid Edge. Answer was “No I am the wrong person” . I will have to watch more of your videos and then see if I can do an assembly to check for issues. These throttles are quite an advanced design, a more basic version of an F1 throttle used on the older NA a engines.

@cadcentralnz 2 жыл бұрын

@@greggray6839 Remember that synchronous isn't the be all and end all and ordered has it's place too. Use whichever tool is right for the job!

@plasticbuzzardmodelshop9715 3 жыл бұрын

Very good.

@ivojurkovic1276 2 жыл бұрын

If you extrude to a depth and than want to come back and make it a specific value from another face how do you set the counter to reference off the other face and not the incremental change. This is the behaviour that I always want when making changes but it’s not obvious how to do it.

@cadcentralnz 2 жыл бұрын

Have a look at this (old) video clip (3 minutes in) and see if that helps define what you are after?

@ivojurkovic1276 2 жыл бұрын

@@cadcentralnz l will definitely check it out can you post the link or the title of the video.

@cadcentralnz 2 жыл бұрын

@@ivojurkovic1276 kzfaq.info/get/bejne/g9amqK-Bq87NnZ8.html - yes, that would definitely make it easier

@ukbb2632 2 жыл бұрын

13:09 how do you hide that orange construction geometry when you are done?

@cadcentralnz 2 жыл бұрын

I'm not sure what you are referring to, but would guess that you either need to hide PMI or the sketches

@ukbb2632 2 жыл бұрын

@@cadcentralnz the geometry you created to set a tangent line for the arc. You can still see it in orange at the end of the video.