SOLID METAL Enclosure & Fume Extraction...Ortur Laser Master 2 Pro

Рет қаралды 29,639

Күн бұрын

"ONE YEAR LATER" REVIEW VIDEO: • Non-Stop BUSINESS Use ...
🔗 Ortur Enclosure from Made The Best: www.madethebest.com/collectio...
🔗 Ortur Laser Master 2 Pro from Made The Best: www.madethebest.com/collectio...
🔗 Ortur Enclosure from Amazon: amzn.to/3vXViY2
🔗 Ortur Laser Master 2 Pro from Amazon: amzn.to/3EyZSiO
🔗 All My Laser Videos: • Laser Engraving Business
🔗My Website: sam-craft.com
🔗Latest Video: goo.gl/Snbz3U
🔗Most Popular Video: goo.gl/vwp6GG
Video Chapters
0:00 - Intro
1:08 - Unboxing & How to Assemble the Ortur Enclosure
12:44 - Features and Tour of the Ortur Enclosure
18:58 - First Use of Ortur Enclosure
21:57 - Review of the Ortur Enclosure
This video covers how to assemble the Ortur enclosure along with unboxing, use and a review of the new laser master 2 pro enclosure from Ortur and sold by Made The Best.
Product info from Ortur:
✅ This enclosure is a protective shell for the Ortur Laser Master 2 Pro laser engraver, which is isolates and gives protection from the level 4 laser beam generated by the laser module.
✅ This Enclosure can’t be used along, it needs to be used with our Ortur Laser Master 2 Pro Laser engraver.
✅ Ortur enclosure is equipped with a ventilation fan, which requires an external ventilation pipe. The other end of the ventilation pipe should lead outside or into a filtration system so that the smoke generated during engraving can be exhausted.
✅The upper cover uses double pneumatic struts, which automatically lift when the top is opened. All metal structure, sturdy and durable.
Product Dimensions 27 x 14 x 9.4 inches
#tools #woodworking #samcraft
*DISCLAIMER*
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!

Пікірлер: 103

@lisaalbrecht7900 2 жыл бұрын

Thanks for the build help in this video! I purchased one of these and was stuck a little on the assembly process. I am going to use mine for the Ortur Aufero Portable Laser Engraver, which is much smaller than the enclosure was intended for. I skipped the steps where I attached my laser to the enclosure and started by assembling the bottom with the sides. Anyway, thanks again for the help!!

@geobizworthen6851 2 жыл бұрын

Sam great job on the enclosure. You are the reason why I purchase the Ortur Master pro. Just a add on that you might be interested in doing that is very simple on wire management to the laser is I took a mild light gauge wire and wrapped the laser wire like a spring all the way to the plug-in and stiffen it up as the wire is not dragging behind and or touching the bed. Well again awesome job on the enclosure and grats on the new property. God bless

@Samcraftcom 2 жыл бұрын

Very cool, thanks! I like the trick on wire management too!

@chipwoodin9060 2 жыл бұрын

Excellent Video Sam. Really. Helped with me assembling my enclosure. Keep up the great work.

@Samcraftcom 2 жыл бұрын

Great to hear, glad it helped!

@umaprendizemacaoconstrucoe8941 2 жыл бұрын

I'm a regular viewer! Thanks for the content!

@VintageForYou 2 жыл бұрын

Great video on the SOLID METAL Enclosure & Fume Extraction Ortur Laser Master 2 Pro all it needs now is some LED lights put inside.😀👍

@betobeto7903 2 жыл бұрын

Great vedio! Thanks! Question, looking for a good quailty laser, a little on the higher end. What wouldyou rocommend?

@joelrggizmo1373 2 жыл бұрын

If I decide to get the extension kit to make it longer is there a housing that makes up for that difference. I have this one Ortur Laser Master 2 Pro but on the way I have arriving soon Ortur Laser Master 3 Pro I also have XTOOL D1 can I use the cup roller from the D1 with my other Ortur ? 2 & 3 you do a good job explaining and you get right to the point without a lot of bull crap.

@familyfencinganddecks6481 2 жыл бұрын

Just got my laser together yesterday, bought the ortur laser master 2 over a k40 because of your reviews! Sadly mine doesn’t function. I’ve reached out to them we’ll see where it goes

@tomowens2720 2 жыл бұрын

what a well designed and robust enclosure IMO.

@RonInAVan 2 жыл бұрын

Great video Sam, but I think the price is to high for the restrictions. You can’t use the Rotary, you can’t engrave longer material, but dang it looks great. I built my own enclosure with a Hidden bottom for the rotary and a opening in front and back for longer items, probably will never engrave longer items but you never know. But dang that ORTUR enclosure looks cool.

@jimbowen3076 2 жыл бұрын

Just put one of these together myself. Two things first I used some double sided tape to mount the laser gauge to the left inside of the case. Second, they need to add a fan guard, when the laser travels to the rear of the cabinet the laser cable may have a tendency to contact the fan blades. I added a piece of mesh screen over the fan for added safety.

@Samcraftcom 2 жыл бұрын

Great ideas thanks for sharing!!

@rogeralder3066 28 күн бұрын

Thanks for the video. I have one on order. Could you tell me what size the vent hose is?

@davehoffman9767 Жыл бұрын

Hello Sam Craft! Sometimes I laser on a larger piece of wood and need to raise my laser onto small pieces of wood - to make it higher. Do you think I could eliminate the side brackets and just have the laser float in there?

@terrypen 2 жыл бұрын

23:15 I would assume that you could hook the fan to the controller via control pins, you could possibly configure the software to turn the fan on and off. You could then program delays via pre and post job. As a computer nerd, there has to be a way to do it... fairly easily!

@katerinakollarova7862 2 жыл бұрын

Hi can you actually raise the engraver to use laser for cups inside enclosure, is itvtall enough and how u move it up inside?

@Greg8872 Жыл бұрын

Just curious. If you were starting over today, would you use the same model or get a different one or version 3 instead of 4?

@LuckyFunEnt Жыл бұрын

How do you use the rotary in this enclosure

@sherryleggett1612 Жыл бұрын

Do you;happen to know if and when an enclosure for the Ortour Laser Master 3 will be available?

@makersmith7848 2 жыл бұрын

do you think that the case is tall enough to add a camera for Lightburn?

@MarcRCAddict 2 жыл бұрын

Wow what an awesome video.👍 I just received my atomstack p7 laser, it’s new on the market. Lol I’ve not used it yet as I’m in two minds if I should use it or just get rid, mainly because I can’t find any trusted people in the UK to buy good laser safety glasses from, the ones on Amazon have got a wide range of mixed reviews, and I don’t want to gamble with my eyes, so I really unsure on what to do.. A smaller enclosure like this would be amazing I’m wondering if there are smaller versions on these..

@danielprovenzano163 Жыл бұрын

Where do you find the center finding gauge for purchase?

@donferron5352 Жыл бұрын

Will the enclosure work with the roller unit? and the Master 2 - not the Pro version?

@darrellneet413 11 ай бұрын

Will it work for the new pro 3?

@WoodsleeSummercraftwoodturning 2 жыл бұрын

I recently purchased the laser, roller and the enclosure, need to assemble the enclosure next, im just looking at the comments re the roller and think ill do something so i can use it, looking forward to using it all. Great video as always Rob

@Samcraftcom 2 жыл бұрын

Very smart reading the comments -- there are some good things down there! :)

@jeffunpronounceable3538 Жыл бұрын

Have you tried this enclosure with an air assist?

@RavensEyeOffroad 2 жыл бұрын

I just bought an xtool d1, will this work for it? (Sorry ultra noob here)

@steveferguson1232 2 жыл бұрын

Kinda reminds me of a K40 laser. Good job by Ortur addressing an enclosure. Great detail by you Sam in your detail. What about storing the little height cylinder?

@Samcraftcom 2 жыл бұрын

I just placed it on the inside of the cabinet for now -- def. needs a better home. Probably double-sided tape to a side panel. :)

@GatofieroYT23 2 жыл бұрын

My problem with the Ortur enclosure is that is cost almost as much as the Laser Master 2 Pro... Like $360 on amazon... I make my own enclosure out of scraps from around my show and a piece of that orange laser-blocking plexiglass and added my own fan... I probably spent about $60 on materials. But that include a louvered soffit vent so I don't get rain it. The nice thing about mine... if I have an over sized piece, I can always take my laser out and place it on top of it... The disadvantage of mine? The bottom is made of 3/4": MDF (NICE, FLAT, LEVEL) and the rest is particle board and pine... so.. it's heavy! Mine works fairly well... I get a faint oder of smoke inside my room, but it's very faint.

@medina3420 Жыл бұрын

So you can't raise your laser for honeycomb board or rotary attachment. 🤔

@adamprice7150 2 жыл бұрын

Great video mate 👍

@Samcraftcom 2 жыл бұрын

Thanks!

@jaycelliott2 Жыл бұрын

Sam. Good video. Say do you know if there is enough clearance inside to raise the engraver machine to use the petit roller addy? Or do I need to take the rails apart each time to do this? I like the enclosure but I do a lot of work with the roller

@Samcraftcom Жыл бұрын

If you leave off the bottom panels of this enclosure, then you can raise/lower the whole unit as needed for the rotary attachment. In one of my recent videos I show where I remove the metal bottom and put the whole unit on plywood to use my custom grid board for projects. It's still plenty sturdy without the bottom. Here's that video: kzfaq.info/get/bejne/atumoseKvrDJaI0.html

@daveandaboat4896 2 жыл бұрын

Hey Sam, thanks for the great videos. New to the Ortur laser and really enjoying the content and how you deliver it! Question on the enclosure, I just purchased one. Regarding the limitations with the metal floor (inability to use rotary accessory), do you think you could just leave the floor off and raise the entire unit up on blocks? Realize this would create a gap for fumes to escape but perhaps you could fashion a skirt or something to minimize? Just curious if you've solved this problem yet. Thanks again! - Dave

@Samcraftcom 2 жыл бұрын

After assembling and using mine, I'd say yes.. you should have no problems doing that. I'll likely do the same. :)

@MajikBugBarn 2 жыл бұрын

I was going to ask if the rotary is pretty much invalid with this enclosure

@philipraimondo 2 жыл бұрын

How about using the rotary tool with the enclosure? Any thoughts or comments you might have would be greatly appreciated. Thanks for all of the great videos…

@Samcraftcom 2 жыл бұрын

I have yet to try a rotary tool. It wouldn't fit with the enclosure as-is. You'd have to take the metal panels off of the bottom and raise the whole thing up to fit.

@-vermin- 2 жыл бұрын

Is that hole in the centre of the top panel that you put a bung in for a camera mount for Lightburn?

@Samcraftcom 2 жыл бұрын

I think that could be their thoughts, yes. During assembly you place a rubber grommet in the hole to seal it up.

@cliff5240 2 жыл бұрын

So still liking the Ortur? I haven't decided yet but learning towards the Fox Alien. Also do you recommend putting your waste board inside under the laser before fully assembling it. Looks like it would be difficult to get it inside after you get it together.

@Samcraftcom 2 жыл бұрын

Just peeking at the FoxAlien, it appears to be a good looking laser. I like the cable management with drag link chains, easy-adjustment for focusing, and advertised max engraving speed of 20,000 mm/min. I haven't yet tried to fit the waste board inside, but do imagine it will be a tight fit. 99% of my uses are for engraving so the templates I use are just outlines for setting items on top, but placement is key. I may just put down layers of masking tape and etch that as my template.

@sam_shows_savannah 2 жыл бұрын

Instead of putting a piece of ply wood inside, I think you should attach it underneath on the out side so it is easier to remove whenever you want to do project larger than the machine bed.

@Samcraftcom 2 жыл бұрын

That's not a bad idea... remove the metal bottom plates and mount it to plywood instead...

@TheLouisianaHobbyGuy 2 жыл бұрын

I guess this is V 2 Sam. The first version has metal like a soda can. But it's still a major fail. 1) You can't use a rotary unless you leave the bottom off. 2) No pass-through doors, so you can't use print and cut for longer pieces. 3) When you use a honeycomb bed, usually an inch thick, you won't be able to engrave any thick material. *4) You can't hang it on the wall* 😎 That said, I really like Ortur, but I wish they would send new products in the beta phase to people like you and me for testing & feedback before they launch them. Look at the Pro for example. Three versions before it actually worked properly. They need to do more R&D before they launch new products. Great video though Brother!

@Samcraftcom 2 жыл бұрын

You're exactly right on those issues and design short falls!

@jackhelm9852 2 жыл бұрын

It does not look like there is any space for an air assist pump so if I want to use one, I would have to drill a hole for the air tube. Is this correct? Also, is there provision for lifting the laser up for engraving thicker materials or for using the roller accessory that they sell for this as well?

@Samcraftcom 2 жыл бұрын

There's enough room where the wires come out at the front left for the air line to pass through. As for thicker materials, the only thing to do is remove the bottom metal plates (or leave them off) and raise up the machine... not a great solution, but understandable since not everyone is doing rotary or very thick materials.

@BEARSMIX 2 жыл бұрын

My question is can you still use the rotary in it or will I need to remove my LM2 to use it then rebuild it after??? Was getting ready to order one of these till I saw the video and gave it a thought!

@BEARSMIX 2 жыл бұрын

Never mind I should have read the comments first as my question seems to have been answered so I guess I won’t be ordering one of these cases but I will build my own

@robbie6625 2 жыл бұрын

I'm very surprised (and a bit sad) that they didn't include a pass-through to allow for burning on larger pieces than the 400x400 frame (although I think getting to that size would be difficult once it's inside the enclosure).

@Samcraftcom 2 жыл бұрын

I agree.. on all fronts. :)

@brendaswartz5131 2 жыл бұрын

Sam, I want to buy my 87 year old husband a craving starting kit . Could you help me with which one to buy. There are so many. Thanks Brenda

@Samcraftcom 2 жыл бұрын

Send me an email at sam@sam-craft.com and I'll see if I can help you out.

@mrtrista007 2 жыл бұрын

question when you say smelly, does that mean dangerous toxic fumes or just smelly? cause one i can live with the other .... allot less...

@SarbarMultimedia 2 жыл бұрын

Its a very nice vacuum chamber. You cannot extract fumes unless there is a FLOW of air through your machine. You need an inlet area at least equal to the area of the extract duct. Put your lips around the opening in a Coke bottle to find out many swallows can you get before allowing air in? As someone else commented , more R&D required.

@jayeckhart1561 2 жыл бұрын

All I know about this enclosure is what I have seen here and I agree with what you said but the enclosure does not look like it is sealed and airtight. There is no weather stripping around the door or the joints where the corners meet. Granted the fan may pull a slight vacuum inside of the enclosure but there is still plenty of air movement through to get the smoke out the back.

@SarbarMultimedia 2 жыл бұрын

@@jayeckhart1561 Hi Jay Just place a small 20mm spacer block under the door lip to prevent it closing and see how much more efficient it is at shifting the fumes.

@Samcraftcom 2 жыл бұрын

The enclosure is far from air tight, so there is still a good amount of air flowing into the enclosure. Whether or not it equals the amount the fan wants to expel, I do not know.

@JamesWilliams-rs5jn 2 жыл бұрын

I think being packaged not assembled is better, if shipped fully assembled it could get damaged.

@danharrier3618 2 жыл бұрын

Sam, could you provide the details of the laptop you were using? I see that it appears to be a keyboard with a small monitor, like an IPAD? I need to find a laptop.

@Samcraftcom 2 жыл бұрын

It's a Fusion5 tablet that runs Windows 10 natively. The keyboard is a Logitech bluetooth keyboard that doubles as a tablet holder. Here are the links to them: 🔗 Tablet: amzn.to/3rGZPuY 🔗 Bluetooth Keyboard: amzn.to/3GFfAKf

@danharrier3618 2 жыл бұрын

@@Samcraftcom Sam, I had good luck running Lightburn from a Windows PC, but controlled on an IPAD PRO using JUMP app to mirror the PC. I can do everything with the IPAD and Pencil while at the machine, even though my larger PC sits at the opposite end of my room (connected by a 30' USB).

@kennardvancamp5593 2 жыл бұрын

Sam, you mentioned that you run your laser with a 10" Windows 10 Fusion5 Ultra Slim Windows Tablet, Are you also able to run Lightburn with that tablet?

@Samcraftcom 2 жыл бұрын

Oh yes -- it will run Lightburn and control the machines no problem. I use the same tablet for my CNC too. Note: just to run the files. It would not be powerful enough to design with. This is the exact one I have and has been great over a year now: amzn.to/33mdFff

@kennardvancamp5593 2 жыл бұрын

Thanks Sam. evidently it will be better to buy a more powerful laptop that I can also design on.

@Biomedtech03 Жыл бұрын

Will this enclosure fit the LM 3?

@Samcraftcom Жыл бұрын

I have no idea

@nickbonilla956 2 жыл бұрын

So I am guessing you are not able to use the rotary attachment with this.

@Samcraftcom 2 жыл бұрын

Yes and no... yes if you remove the metal bottom plates and raise the system up on blocks. No if you leave it as-is. This is something I'm struggling with myself as I just got a rotary and want to learn how to use it.

@katerinakollarova7862 2 жыл бұрын

@@Samcraftcom did you ever figure out the rotary part?

@scottmorris4914 Жыл бұрын

Here is a better design, you mount the engraver to the base plate, and then the assembled cabinet is installed from the top down on to the base and attached.

@st0mper121 2 жыл бұрын

No room for rotary, Looks like a nice enclosure, they need to add a few inch's to height.

@nickguidry2213 2 жыл бұрын

The big nope factor for me is if you have a rotary tool you can't use this enclosure

@Samcraftcom 2 жыл бұрын

Yep.. that's a killer. Makes mine useless. :-\

@scottmorris4914 Жыл бұрын

Where is the air intake?

@Samcraftcom Жыл бұрын

From the cracks between door and other areas in the cabinet. They add up to being enough intake for the exhaust and it does well. Still using it to this day, every day in my small business!

@darrinjones9387 2 жыл бұрын

Great idea but my laser is much bigger. Making my own based on this

@Samcraftcom 2 жыл бұрын

I learned long ago NEVER to try to win any "mine is bigger" contests. Hahaha Really cool you're building you own though!

@KaliBlaz 2 жыл бұрын

if I were you I would build the exact same thing with MDF, at least mdf is heavy and stable. $300 is not worth buying in my opinion..

@orturnet 2 жыл бұрын

Geat video, but the official website of ortur sell 299.99, this website provide more expensive product.

@Samcraftcom 2 жыл бұрын

The official website wasn’t the one who reached out to me with the equipment. 😉

@markhall7222 2 жыл бұрын

opps $399 now

@baxterboy23 2 жыл бұрын

Question: You and Josh won the lottery or something.?? 🤔😀

@Samcraftcom 2 жыл бұрын

No? Well okay... I didn't -- don't know about him. :)

@EBussom 2 жыл бұрын

Love your videos, but you might want to add a warning over the flashing

@Dave-nr3pd 2 жыл бұрын

RIDICULUS PRICE.

@spydie 2 жыл бұрын

It looks to me like your home-made one had a lot more features. I'd rather have your home-made one than this one. I was thinking about buying this since I don't have the routers and large table saw you have to build your other enclosure, but for the money spent, I can buy some more tools that I will get other use from and have a better enclosure than this expensive one. So I guess you gave up on the home-made one?

@Samcraftcom 2 жыл бұрын

I never had a homemade laser enclosure

@spydie 2 жыл бұрын

@@Samcraftcom Sorry, I had you confused with Chris Powell, the beards got me confused! LOL

@Samcraftcom 2 жыл бұрын

@@spydie Ahhh.. that totally makes sense then! :) Yes, Chris is my brother from another mother!

@spydie 2 жыл бұрын

@@Samcraftcom I've ordered a router and table so I can build his cool enclosure. I'm a machinist and can do anything with metal, but I'm not much of a woodworker, so I hope my skills are good enough to make that enclosure. I already have a small table saw and I own skill saws and jig saws and other tools, but never had a router. I'm really enjoying my new hobby with the laser engraver/cutter. The only problem is, mine is taking 6 passes at 100 speed and 100% power to cut through 1/8 (3mm) basswood plywood and it should be able to do it in 1 pass. So Ortur is sending me a new laser head, but it's Chinese new years for a month so it will be awhile before I get it. I'm tempted to order another machine from Amazon, swap out the laser and send it back. If there's a bad part available, I'll always get the bad one!

@thelinkofalllinks 2 жыл бұрын

Can you make some videos that aren't just free product promo videos. Back to real projects like lathe work and shop projects and really anything else. That was why I started following you. Want to see projects. Not a shill. Should just change the name of your chanel to Sam reviews Chinese products for money.

@Samcraftcom 2 жыл бұрын

This is the first comment you have ever left on this channel, so this reply is for other viewers who genuinely watch and participate in my channel vs. someone who may use an alternate account or only show up to whine and complain... I understand what you're asking. However try to view things from my perspective as well. A shop project that takes a lot of time to develop, build, and showcase is a gamble whether anything comes of that content and work (AKA paying the bills). On the other hand choosing to do sponsorships, I say choose because only 1 out of every 20 request is worthwhile for this channel and viewers. Those videos do pay some bills right out of the gate. In the long run it's about sustainability on my part. This channel is not the primary focus of my life right now. As such, the content will wax and wane as my time and life allows. Being able to bring some content to this channel in the form of the sponsored videos of late has been what I can do on my end. Otherwise there would not have been any content to view.

@dustybookshelves2948 2 жыл бұрын

@@Samcraftcom FWIW, I really appreciate this review. Open-air diode lasers are not safe to use as shipped and it's really helpful to see what the OEM enclosure option & design rationale is for Ortur, which is the only company I know of in the sub-$500 engraver market that actually offers support & failure replacements. Not everybody who wants to engrave their kid's name on something is able or willing to do a full DIY enclosure build from plans in the internet.

@adventureswithcrystal 2 жыл бұрын

I like his videos. I don't care if he got a free machine. I needed to learn about this enclosure and he sure helped me figure out how to put it together. Great job, thank you Sam!