SolidWorks RE Tutorial

  Рет қаралды 5,684,235

SolidWorks Tutorial ☺

SolidWorks Tutorial ☺

6 жыл бұрын

V6 Engine complete video sw-tc.net/#320 solidworks tutorial, repuloading the previous engine in one video tutorial, For other engines/ motors/: • Engines, Motors & Rotors
-This engine devided by parts here: • Project 10: V6 Engine
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
Here is a similar* engine *in inches" by Matt Lombard with thanks" www.amazon.com/Mastering-Soli...
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

Пікірлер: 1 000
@dice1456
@dice1456 5 жыл бұрын
1. Piston 2:32 2. Crank Shaft 23:42 3. Engine Block 31:53 4. Rocker Arm 47:26 5. Cylinder Head 1:06:12 6. Exhaust Manifold 1:27:04 7. Air Filter 1:41:13 8. Cam Shaft 1:46:08 9. Valve 1:52:53 10. Rocker Spring 1:54:52 11. Belt Wheels 1:58:39 12. Intake Manifold 2:06:21 13. Front Cover 2:18:26 14. Oil Pan 2:26:24 15. Air Turbo 2:36:36 16. Valves Cover 2:49:00 17. C. Retainer 2:56:25 18. C. Bushings 2:59:10 Lower Block Assembly 3:01:13 Upper Block Assembly 3:07:07 Outside Stuff Assembly 3:18:44 Shaft & Belts connecting 3:27:24 Exhaust Hoses Assembly 2:34:55
@user-bo4sy2cq3d
@user-bo4sy2cq3d 5 жыл бұрын
Doğru videoyu nasıl bulurum?
@kevinleonsanchez7111
@kevinleonsanchez7111 4 жыл бұрын
The rocker arm has a little bit of shortcut. He showed how its made, but upon assembly, it was a different object.
@sundarramanj1608
@sundarramanj1608 4 жыл бұрын
@@kevinleonsanchez7111 yes bro, I also see it
@thompsn_9934
@thompsn_9934 4 жыл бұрын
@@kevinleonsanchez7111 kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@plinsavi
@plinsavi 4 жыл бұрын
In the connecting rod part, you have to change the dimension of the bigger hole from 76.2 to 63.5. There is an editing cut in the video that doesn't show that he changed the dimension. In 4:23 you can kind of see that the new dimension is 63.5. Like this comment for people to see it.
@VAB1990
@VAB1990 4 жыл бұрын
Yes i noticed it but after I got stuck where we do extruded cut on the sides at 6:40
@mandiesmith5483
@mandiesmith5483 4 жыл бұрын
plinsavi good job
@cecilkoranteng2014
@cecilkoranteng2014 4 жыл бұрын
Would it be possible to get a pdf of the parts with dimensions
@okgbp
@okgbp 4 жыл бұрын
which is correct though? The 76.2 seems like a corrected value.
@mateenlakhani621
@mateenlakhani621 3 жыл бұрын
@@okgbp but how do u do the extruded cut at 6:40 ?
@BrozakJaslene
@BrozakJaslene 5 ай бұрын
Bạn không chỉ làm tăng số lượng mà còn tạo ra sự tương tác chân thực và ý nghĩa. Điều này giúp nội dung của mình trở nên phong phú hơn
@jilbake
@jilbake 7 ай бұрын
Im just gonna say it. I wish I was that smart. I am a diagnostic consultant for a major automaker supporting dealerships nation wide and its not a job for a dummy, but when I see you do that, I feel like a complete box of rocks. That is awesome work
@HBrooks
@HBrooks 4 жыл бұрын
damn fine job. cool to see advanced mates in action
@crapcopter
@crapcopter 2 жыл бұрын
Woke up to this on my phone at 3am. Not disappointed.
@fernandoleopoldokauling2405
@fernandoleopoldokauling2405 6 ай бұрын
Um excelente projeto de engenharia - parabéns!!!🎉🎉🎉
@martingaete8098
@martingaete8098 5 жыл бұрын
Thank you very much, I really appreciate all the effort you put in your videos!
@automatix09
@automatix09 4 жыл бұрын
even if there were a few problems it's possible to solve them. THANK YOU for your great work! Helps me a lot to lern new features for school (technical school). If you read that- have a nice day ;)
@abdilrazaqadam3433
@abdilrazaqadam3433 4 жыл бұрын
all i can imagine is the feeling after executing this masterpiece work
@VARLIVE
@VARLIVE 4 жыл бұрын
Hi dear friend 👋 😊 Can you check my Motor AC design: kzfaq.info/get/bejne/ord8lc6Gld3cdZ8.html
@pipthewarrior3738
@pipthewarrior3738 Жыл бұрын
He felt 10 fps of it
@mike2652
@mike2652 4 жыл бұрын
Very nicely illustrated and demonstrated.
@XxTHELEGONxX
@XxTHELEGONxX 3 жыл бұрын
good job im getting closer to completing my engineering degree solid works is bad azz ! hell yea dude keep it up!
@romlef526
@romlef526 6 жыл бұрын
Magnifique !!!! , la seule petite chose manquante sur ce moteur est une animation automatique !!!! résultat superbe !!!!!
@antoinealzieu3477
@antoinealzieu3477 7 ай бұрын
salut ta pas eu de problème avec le culbuteur ? il a dessiné une pièce mais au moment de l'assemblage ce n'était pas le même
@MrWilli117
@MrWilli117 2 ай бұрын
j'ai eu le meme probleme figure toi @@antoinealzieu3477
@dudleyparkfmx336
@dudleyparkfmx336 2 жыл бұрын
Thanks, great video, appreciate the time you spent making the video. Had to laugh watching your computer almost dying at the end trying to animate the assembly. Good work my friend.
@veronicaveronicabuenolemos680
@veronicaveronicabuenolemos680 5 ай бұрын
Foi tudo muito rápido, estão de parabéns pelo trabalho, fiquei impressionado.
@a.elmehni6954
@a.elmehni6954 3 жыл бұрын
I saw the video at 0.5 speed, so, almost seven hours of learning !!! Thank you
@justamechanicalengineer5721
@justamechanicalengineer5721 3 жыл бұрын
Inspired by your creativity I have also start a solidworks model designing channel. Keep up the good work
@marciacarmocouto4952
@marciacarmocouto4952 5 ай бұрын
Valeu muito pelo atendimento no feriado, salvou meu trabalho.
@user-hg8cf8ur6i
@user-hg8cf8ur6i 7 ай бұрын
great video i did it the first time and it worked thought i would need to get someone out to help me but you explained it well and it worked thank you
@praveenkumar-kb4nj
@praveenkumar-kb4nj 2 жыл бұрын
Great.It would be very usefull if you provide technical details of each part and Specify their measures in a Pdf file.I would have loved to recreate this model for my assignment.
@ermdallauddinansari1948
@ermdallauddinansari1948 3 жыл бұрын
I follow you sir and learn basic and advance knowledge sir
@subashvelu6659
@subashvelu6659 6 жыл бұрын
This tutorial a gives different view about drawing thanks dude
@ashutoshdubey8117
@ashutoshdubey8117 11 ай бұрын
After countless failed attempts, this working version feels like a breath of fresh air.
@shammideepak5677
@shammideepak5677 11 ай бұрын
Hello can you send me the file
@txqi
@txqi 6 жыл бұрын
Great video. Would it be possible to give the technical details of each part? Specifically their measures? I would have loved to recreate this model for my university assignment (giving you credit for its design), but my teachers did not accept it, for a lack of proper technical details. Still, I did recreate some parts just for fun and practice and learned a lot! So thanks!
@Uu-vr3wr
@Uu-vr3wr 9 ай бұрын
Did you find any
@anton.saikin9837
@anton.saikin9837 4 жыл бұрын
Good job!!! Where can i get or find sizes for parts?
@shrivignesh883
@shrivignesh883 4 жыл бұрын
Thanks sir for making this video I have done this fully I learned a lot
@bharaniraj3797
@bharaniraj3797 6 жыл бұрын
Thanks for the complete session video
@heartsbeauty577
@heartsbeauty577 6 жыл бұрын
Is all the dimensions in here are correct ? does it works for you? because some of the dimensions are FAKE(edited))
@shaikhshaad2887
@shaikhshaad2887 4 жыл бұрын
Thanks for this nice tutorial for best practical in solid works. I may request you to made aircraft angine as soon possible.
@andariniandarini4468
@andariniandarini4468 4 жыл бұрын
Thank You I Just Love this Channel. I Need to learn Solidwork but difficult to find mentor then i find this
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
For more help ypu can contact me at kushagraroy1@protonmail.com
@huntergreer98
@huntergreer98 3 жыл бұрын
Solidprofessor is what my college cad course is using
@abaymitiku8320
@abaymitiku8320 6 жыл бұрын
HELLO SIR AM GLAD TO SAY THANK YOU FOR YOUR TUTORIAL. ITS GREAT TUTORIAL.
@crazy031089
@crazy031089 3 жыл бұрын
For those off you not properly realizing: This is not a real engine. There are a large number of (small) mistakes and simplifications, wich mean this would never work. It is a good start however to use to explain how an engine works. But most importantly, this is a nice tutorial to show what is possible in solid works and how to do it. This also means that the exact dimensions don't matter at all.
@Ghost-ro2oy
@Ghost-ro2oy 3 жыл бұрын
Hi there. Thank you for the video. It's excellent. I will post here some tips for you guys to do the full engine. Here some corrections : 1) When you start the PistonRod at 3:55, make sure the dimension of 76.2 is always changed to 63.5 (you'll notice that he corrected it at 4:21). Thanks to plinsavi for finding this correction. 2) Make sure that all sketches are constrained (completely black), specially when you copy some patterns. 3) At 47:25, a weird rocker arm is designed, which doesn't fit in the assembly. Stop there. The correct rocker arm is here : kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html Then jump directly to 57:40 to start the next part 4) after finishing the IntakeManifold1 (2:17:56), you'll notice that it is not perfect, because of how the middle part is connected to the 3 boundaries. A solution would be to add an extra sketch. for this, follow these steps : a) Move the Boss-Extrude8 on the tree to the top, just under Plane2 b) On the extruded face, create a new sketch and convert the entities in order to have a copy of the initial sketch (make this one visible to be able to copy it) c) on the tree line, Move the new sketch and place just after the Boss-Extrude8 d) Modify the Boundary1, Boundary2 and Boundary3 by using the new sketch, instead of the old one. Follow exactly the same steps show on the video. e) The result is a clean connection between the middle part and the different boundaries. 5) About the 5/16 hole at 2:33:00 : I tried several times with the shown values but it didn't work. After some tests, the custom sizing should be approximately : Diameter of the primary hole: 1.5in Major hole diameter : 0.332in Depth : 0.235in 6) When designing the CrankShaft Bushing (2:59:37), change the dimension of 76.2mm to 63.5mm. Otherwise, the CrankShaft will not fit into it at 3:03:14. 7) After adding the hoses at 3:40:16, you'll notice that they don't fit with the Airturbos. I suggest to modify the exhaust of the airturbos to have an external diameter of 50.8mm.
@user-zh6oe1te2m
@user-zh6oe1te2m 3 жыл бұрын
其实用快捷工具栏比较好~鼠标笔试可以设置为8笔试的!用布局草图的形式自顶向下建模,效率会高很多,像楼主这种只适合已知规格的;零部件制作,如果碰见比较大的项目或是需要反复测试论证修改的项目,这种方法就捉襟见肘了,因为稍微一改动,装配关系就会有一大推的报错!!! 个人意见,不要喷~ 欢迎交流!
@microsoftsarker
@microsoftsarker 6 ай бұрын
Thank you so much for making this video! It was extremely helpful!!!
@kirang4415
@kirang4415 2 жыл бұрын
Good tutorial.Came great as expected. 😁
@omkarkalaskar3823
@omkarkalaskar3823 4 жыл бұрын
Iam facing problem while assembling intake manifold. I think the part while doing assembly operation is different in dimensions then you showed in your video. Please help to resolve this problem..
@e.t5102
@e.t5102 Жыл бұрын
Hi!Can you share the technical drawings of them if it's okay for you?I want to try on my own first. :)
@shailajaks9132
@shailajaks9132 5 жыл бұрын
Thank you so much for this tutorial
@nopelindoputraperkasa5869
@nopelindoputraperkasa5869 4 ай бұрын
SolidWorks RE Tutorial #320 : Car Engine complete video (2 turbo V6) - (advanced assembly)... Amazing Vidio 🇮🇩😍🙏👍
@MadafakaGejmer
@MadafakaGejmer 4 жыл бұрын
Very nice tutorial. I've learned basics with it! Too bad parts don't match in the end and there are problems with overlapping geometry but overall, very good tutorial for learning basic in SolidWorks!
@stylianosgeorgiou3147
@stylianosgeorgiou3147 Жыл бұрын
bro what basics thats some expert level shit🤣
@femiosusa510
@femiosusa510 Жыл бұрын
@@stylianosgeorgiou3147 You'd be surprised what experts can do lol.
@itshakchattopadhyay6014
@itshakchattopadhyay6014 2 жыл бұрын
For anyone getting knitting errors for the turbo change the distance between the rectangles from 80.45 -> 80.95 and increase/decrease the number or sections to the maximum/ minimum. It works on the newest catia version that way
@paulmitzlaff6952
@paulmitzlaff6952 Жыл бұрын
Thanks for this. It just worked for me in Solidworks
@alessandroscovoli7122
@alessandroscovoli7122 Жыл бұрын
Bro but where he took the principal part of racket arm? Help draw a piece and in assembly help took another
@swelch4266
@swelch4266 Жыл бұрын
Thank you so so much!
@matteomonti1454
@matteomonti1454 Жыл бұрын
thanks
@filippoelmi7331
@filippoelmi7331 Жыл бұрын
@sahilrana4933
@sahilrana4933 2 жыл бұрын
Really it's a Hardwork with patience Thank you very much ✨✨ 🙏
@lorenzopellegrini4072
@lorenzopellegrini4072 3 жыл бұрын
DONE ! Great tutorial, thank you.
@MrBhavikpandya
@MrBhavikpandya 3 жыл бұрын
Hi SolidWorks Tutorial. Thanks for making such a great model for practicing. But I am surprised in the Exhaust Manifold section at 01:37:03. when we choose bose extrude of Sketch 1 (contour 1) it gave an error of thin feature! Why!! So we extruded it in opposite direction and then modified it in the desired direction. and bang! it worked! I am surprised how did it work! I would appreciate if anyone can explain why it happed and how it just worked when we modified it later? Thanks, Bhavik.
@Fluttydev
@Fluttydev 6 жыл бұрын
You should upload the parts description with exact dimensions this will really help full for us, thanks
@kef1kef2kef3kef4kef5
@kef1kef2kef3kef4kef5 4 жыл бұрын
@@kushagraroy5081 E-mailed u, still available?
@volkanuzey6932
@volkanuzey6932 4 жыл бұрын
@@kef1kef2kef3kef4kef5 can u take the drawing?
@ilgazuzumoglu7093
@ilgazuzumoglu7093 4 жыл бұрын
@@kushagraroy5081 i sent you email
@carlosenriquesalassoto7373
@carlosenriquesalassoto7373 4 жыл бұрын
@@ilgazuzumoglu7093 Can you send them to me too?
@zephinsgeorge5910
@zephinsgeorge5910 4 жыл бұрын
@@kef1kef2kef3kef4kef5 hey did you get the drawings???
@angeloazzarano2002
@angeloazzarano2002 6 жыл бұрын
Fantastic video! Just a question: the engine displacement is 9648 cm ^ 3?
@gaitrivietnam
@gaitrivietnam 5 ай бұрын
Happy new year 2024, I wish your family and you good health and success, I like your video, it's really great
@karthik.max4450
@karthik.max4450 3 жыл бұрын
Finally finished it completely within 4 days...some dimensions are wrong in the video but still made it successfully
@mayanksinghal273
@mayanksinghal273 3 жыл бұрын
Hey! I am starting to work on this model, can you please tell the exact points of dimensions which needs correction. I will wait for your reply.
@aliqawqazeh7199
@aliqawqazeh7199 3 жыл бұрын
can you give me the specifications on drawing of all parts like pdf file ???
@tooldesigntech3819
@tooldesigntech3819 2 жыл бұрын
kzfaq.info/get/bejne/fMyGiayc2bOaooE.html* SUBSCRBE FOR MORE DETAIL
@ghassanfaris8703
@ghassanfaris8703 5 жыл бұрын
Done ✔ , Thank you for this tutorial
@trumanleonardi
@trumanleonardi 3 жыл бұрын
Was alt tabbed and thought my spotify was playing cause the synth playing in the beginning of the video is a banger.
@perdiumdutt440
@perdiumdutt440 3 жыл бұрын
same happened to me....
@ahmedabdalluh7974
@ahmedabdalluh7974 2 жыл бұрын
he used adesign from another thing and here is the link for the rocker arm kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@ronicksamuel2912
@ronicksamuel2912 4 жыл бұрын
the 4 tutorial "Rocker Arm" is not complete/correct, please i need the complete/correct video on rocker Arm. thanks
@GigaChad-hf4yo
@GigaChad-hf4yo 4 жыл бұрын
here check this kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@jorgeluisquiroz2356
@jorgeluisquiroz2356 4 жыл бұрын
@@GigaChad-hf4yo Muchas gracias
@user-de2pg3xv3r
@user-de2pg3xv3r 3 жыл бұрын
@@GigaChad-hf4yo 감사합니다!
@amityadav-dz3uw
@amityadav-dz3uw 2 жыл бұрын
Qqqqqqsq1qqssqaqaaqqqq wwqstwq
@Mr.Rajput_Vishal
@Mr.Rajput_Vishal 2 жыл бұрын
From where we can get details for this drawing for practice
@Mjloverjr
@Mjloverjr 11 ай бұрын
beatiful video im completely speechless god bless you
@loicbarre6349
@loicbarre6349 2 жыл бұрын
I paused the video at 3:32:45, because it shows two things I don't understand. First I see the PartR11 floating. Secondly, it looks like the CamShaft Retainer is coming out of the Valves cover. Also, with a bigger project like this it is easier to number your parts. I like to use the reference numbers as following; 1.1.1-A-[Part name]. First number is referring to the project number (or main assembly). Second number is for sub-assembly. Third number for part number. Letter for revision references ("A" being "REV0" and "B" being a revision of "A", and so on). This will not only help finding your parts faster. It also orders them and you can still search them by name. This really comes in handy whenever you add all the bolts etc. to your project folders as well. Other than that very inspiring video!
@kize32
@kize32 5 жыл бұрын
First time I see an intake feed turbo
@antonioxavierdcosta5610
@antonioxavierdcosta5610 3 жыл бұрын
Turbocharger works with the help of exhaust gases...... The turbocharger in the video doesn't seem to work with exhaust gases...
@brandonbowen3197
@brandonbowen3197 5 ай бұрын
God damn ❤️fabulous ,I Love you Blessings from Miami, Florida
@Norman_Peterson
@Norman_Peterson 5 жыл бұрын
amazing work!
@quantumshadow4218
@quantumshadow4218 5 жыл бұрын
this what i need great video and channel!!! im an engineering student and im gonna buy parts for my new cad computer but im searching about professional gpu and cpu you can give me some advice or at least tell your hardware configuration? im gonna work in a full turbofan airplane for my thesis
@300ml_brasil
@300ml_brasil 5 жыл бұрын
kzfaq.info/get/bejne/fZNpY9R2r6e6m4k.html
@3Diest
@3Diest 2 жыл бұрын
Solidworks is amazing software, but you should also Checkout my playlist in Fusion 360.
@nirajsirvi4780
@nirajsirvi4780 4 жыл бұрын
Big problem with rocker arm u make different and in assembly it comes as different part how
@bahaazidan9218
@bahaazidan9218 4 жыл бұрын
I had the same problem
@agastinjebaraj5111
@agastinjebaraj5111 3 жыл бұрын
Same problem
@yincheolhong6735
@yincheolhong6735 3 жыл бұрын
You can found that at this link. kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@numandalaslan6360
@numandalaslan6360 3 жыл бұрын
how did you fix this?
@onurcanmucuk3287
@onurcanmucuk3287 3 жыл бұрын
@@yincheolhong6735 Thanks Dude
@patmebg3794
@patmebg3794 2 жыл бұрын
Wonderful video. Need more detail. Thanks
@shreyashghare6838
@shreyashghare6838 2 жыл бұрын
Very Good efforts taken.
@sulphurgamerz8488
@sulphurgamerz8488 2 жыл бұрын
I love this video 🎥 😗
@akshaybhapkar1626
@akshaybhapkar1626 3 жыл бұрын
Took me 6 days to complete the whole...There are some errors in the dimensions of components. But overall, I liked it. I learned a lot about different mates. ..Keep up the good work. You should've attached some animation as well.
@rajivshenoy897
@rajivshenoy897 3 жыл бұрын
Can you please let me know about the rocker arm dimensions in the video
@akshaybhapkar1626
@akshaybhapkar1626 3 жыл бұрын
@@rajivshenoy897 kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@gregorylincoln4328
@gregorylincoln4328 2 жыл бұрын
@@rajivshenoy897 eb b. Bf b b. F b fb. V g b. f v. B f f ff v v bfb. Efv b b f vv. V. G fe b b. G. E. V g gv f b g. F b vb b. V. g. V. Vebvfef fb bff. b fffb b. F fe b f b e b. B . E.bb .bfv. f. F.b. B.f.bb. B fbfb fbb. Bf bfb..b..bb b .b.b .b.v.bf.bf. eb...fb...b.b.f.bff fff.b.b.bb... b..bffe.b .vfb.f.bff fe .f. V. Fff b.f b. V f b. f fb.. .bb v . F.b. .b.v.f f.bf f bff ..f v f. f v vbfc.ffffv. .v f f ff ff. f fv. B v. F f bf. F . Bff b. B b.ff.bffb..fb.e fb.ff.b. v eefb.bff.b. q q q. Q q q qs qqq q qq. Qq q qq qqq. Q q. Q. Qq qqq q q. Qq qqq q. Q q. Qq q q q. Qaqqq qq Q qqQ q qq Q. QqQ. Q qqqq Qq qQ q qqqq. Q qq qqq. Q qqqq qqq. Qqq qq q. Qqq q qq. QQqqq Q q q q. QqqQq q qq qqq q Qq q qqq Q q Q q q q Q q q q q Q q. Q Q. Qq q qq q . Qq q q qqq qq q q q qq q Q Q qqq qq. Q. Q. Q. Qqq q q q qq qqq qqqq q qq Q q. Q qq q q. Q Q Q Q q q q Q q Q qqq qqqq Q q Q Qqqq qq Q Qqq qqqqQ q q qqq q. Qqqq q qq qQ q qq q qq q. Qq qqq Q Qqq qq q q q. Qqq Q. Q. Q Qq qqq. Q. Qq qqqqq Q qq qqq. QQ qq d Qqq q qq q q Q qq Q Q qq Q qqq Qq. Q q Q. Q Qq qq. Q qq q qqqq. Q q q Q q qqq qQ. Q q qqq qq Q qq Q q qqQ Qq. Q Q. qq qqq qq q q qqqq Q. Q Qqq q q q qqq qq. Q q. Qq q q qq qq q qq qqq qq. Q. Qqqqq q q qqq q q qqq q qqq
@gregorylincoln4328
@gregorylincoln4328 2 жыл бұрын
@@rajivshenoy897 eb b. Bf b b. F b fb. V g b. f v. B f f ff v v bfb. Efv b b f vv. V. G fe b b. G. E. V g gv f b g. F b vb b. V. g. V. Vebvfef fb bff. b fffb b. F fe b f b e b. B . E.bb .bfv. f. F.b. B.f.bb. B fbfb fbb. Bf bfb..b..bb b .b.b .b.v.bf.bf. eb...fb...b.b.f.bff fff.b.b.bb... b..bffe.b .vfb.f.bff fe .f. V. Fff b.f b. V f b. f fb.. .bb v . F.b. .b.v.f f.bf f bff ..f v f. f v vbfc.ffffv. .v f f ff ff. f fv. B v. F f bf. F . Bff b. B b.ff.bffb..fb.e fb.ff.b. v eefb.bff.b. q q q. Q q q qs qqq q qq. Qq q qq qqq. Q q. Q. Qq qqq q q. Qq qqq q. Q q. Qq q q q. Qaqqq qq Q qqQ q qq Q. QqQ. Q qqqq Qq qQ q qqqq. Q qq qqq. Q qqqq qqq. Qqq qq q. Qqq q qq. QQqqq Q q q q. QqqQq q qq qqq q Qq q qqq Q q Q q q q Q q q q q Q q. Q Q. Qq q qq q . Qq q q qqq qq q q q qq q Q Q qqq qq. Q. Q. Q. Qqq q q q qq qqq qqqq q qq Q q. Q qq q q. Q Q Q Q q q q Q q Q qqq qqqq Q q Q Qqqq qq Q Qqq qqqqQ q q qqq q. Qqqq q qq qQ q qq q qq q. Qq qqq Q Qqq qq q q q. Qqq Q. Q. Q Qq qqq. Q. Qq qqqqq Q qq qqq. QQ qq d Qqq q qq q q Q qq Q Q qq Q qqq Qq. Q q Q. Q Qq qq. Q qq q qqqq. Q q q Q q qqq qQ. Q q qqq qq Q qq Q q qqQ Qq. Q Q. qq qqq qq q q qqqq Q. Q Qqq q q q qqq qq. Q q. Qq q q qq qq q qq qqq qq. Q. Qqqqq qqqqq. Q qq q q qqq q q qqq q qqq
@gregorylincoln4328
@gregorylincoln4328 2 жыл бұрын
@@rajivshenoy897 eb b. Bf b b. F b fb. V g b. f v. B f f ff v v bfb. Efv b b f vv. V. G fe b b. G. E. V g gv f b g. F b vb b. V. g. V. Vebvfef fb bff. b fffb b. F fe b f b e b. B . E.bb .bfv. f. F.b. B.f.bb. B fbfb fbb. Bf bfb..b..bb b .b.b .b.v.bf.bf. eb...fb...b.b.f.bff fff.b.b.bb... b..bffe.b .vfb.f.bff fe .f. V. Fff b.f b. V f b. f fb.. .bb v . F.b. .b.v.f f.bf f bff ..f v f. f v vbfc.ffffv. .v f f ff ff. f fv. B v. F f bf. F . Bff b. B b.ff.bffb..fb.e fb.ff.b. v eefb.bff.b. q q q. Q q q qs qqq q qq. Qq q qq qqq. Q q. Q. Qq qqq q q. Qq qqq q. Q q. Qq q q q. Qaqqq qq Q qqQ q qq Q. QqQ. Q qqqq Qq qQ q qqqq. Q qq qqq. Q qqqq qqq. Qqq qq q. Qqq q qq. QQqqq Q q q q. QqqQq q qq qqq q Qq q qqq Q q Q q q q Q q q q q Q q. Q Q. Qq q qq q . Qq q q qqq qq q q q qq q Q Q qqq qq. Q. Q. Q. Qqq q q q qq qqq qqqq q qq Q q. Q qq q q. Q Q Q Q q q q Q q Q qqq qqqq Q q Q Qqqq qq Q Qqq qqqqQ q q qqq q. Qqqq q qq qQ q qq q qq q. Qq qqq Q Qqq qq q q q. Qqq Q. Q. Q Qq qqq. Q. Qq qqqqq Q qq qqq. QQ qq d Qqq q qq q q Q qq Q Q qq Q qqq Qq. Q q Q. Q Qq qq. Q qq q qqqq. Q q q Q q qqq qQ. Q q qqq qq Q qq Q q qqQ Qq. Q Q. qq qqq qq q q qqqq Q. Q Qqq q q q qqq qq. Q q. Qq q q qq qq q qq qqq qq. Q. Qqqqq qqqqq. Q q. Q. Qq q q qqq q q qqq q qqq
@edgardhernandez3568
@edgardhernandez3568 4 жыл бұрын
Me costo mucho trabajo , pero muchas gracias por enseñar.
@dimitrihamelin1060
@dimitrihamelin1060 3 жыл бұрын
Thank you so much for this video !
@jorgeveracazarin8486
@jorgeveracazarin8486 3 жыл бұрын
Hello! i am going to tell you how i fix the problem with the holes in the intake manifold .step1.- offset the 6 squares 6.35 (outside) before boundary base (i used lofted boss now). step 2.- convert intities that 6 offset squares. step 3.- hide the first 2 sketches and use the 2 sketches with only the offset squares. step3.- use lofted boss instead of boundary base with the offset squares (in star/end constraints put normal to profile in both) step4. Show again the first 2 sketches to extrude the squares as shown in the video (extruded complete without selecting contour) . step5.-in a new sketck convert into intities the 6 original squares and keep only this 2 sketches (hide the others) step6.- lofted cut and set both normal to profile. step 7.- continue with the rest. Hope this could help you and sorry if my english is not the best. like so everyone can see this
@jaredthebest47
@jaredthebest47 3 жыл бұрын
Thats a great solution! here's the process I used: 1. Continue the tutorial as shown until you get to the extrusions 2. Extrude as shown but include the holes as well, make sure to turn off 'merge result' 3. Use the intersect tool and select all bodies, click 'intersect' 4. you can now select which intersections to delete. Select the insides of the manifold as needed. That's it! this way you can stick with the video tutorial most of the way.
@ThanhHa-sl6py
@ThanhHa-sl6py 3 жыл бұрын
Brothers and sisters help me with, the size does not seem to be correct when assembling, what to do ???
@mosand58
@mosand58 Жыл бұрын
@@ThanhHa-sl6py Sketch on Plane 2: Change 123.83 to 143.83
@melekdeniz8173
@melekdeniz8173 3 жыл бұрын
We did the process while drawing the rocket arm, but another part was used in the assembly part, so I couldn't do the rocket arm assembly, now it will affect the main assembly
@danveysey2223
@danveysey2223 3 жыл бұрын
This should be the rocker main body you need to assemble the whole rocker arm.kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html&ab_channel=SolidWorksTutorial%E2%98%BA
@anikeshmane5036
@anikeshmane5036 5 жыл бұрын
Can you plz provide the dimensional sketch you used to create these parts ...it will be of great help
@jackspicer455
@jackspicer455 3 жыл бұрын
Whoa!This is Masterpiece.
@galadler34
@galadler34 5 жыл бұрын
What are the outer sizes of the complete engine? Or how can I see or measure the sizes?
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@kaidenwhaley7646
@kaidenwhaley7646 3 жыл бұрын
@ColdPetRat2.99 hey man I know it’s been a long time but what are the dimensions of the outer engine?
@johnjames1994
@johnjames1994 6 жыл бұрын
can i use the rocker arm in the play list for this assembly?
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@cadmech4740
@cadmech4740 4 жыл бұрын
@@kushagraroy5081 can you send me the drawing on shanespinwarne0@gmail.com
@santhoshs4509
@santhoshs4509 3 жыл бұрын
@@kushagraroy5081 can you please send me the drawing or rocker arm related information to santhoshsanthosh710@gmail.com Thanks in advance
@mayanksinghal6794
@mayanksinghal6794 3 жыл бұрын
Hey kushagra, can you please send the rocker arm part design via mail mayanksinghal6768@gmail.com , Thankyou.
@ardiansalihu2036
@ardiansalihu2036 5 жыл бұрын
Nice done.Gratulate.
@lancehu
@lancehu 7 ай бұрын
nice video! i would make one myself someday when i got the time. for the moment, i'm thinking about buying another fnatr enclosure for my neptune 4. i already got two for my ender 3 s1 and a1 mini and they work great.
@corymohill-smith4380
@corymohill-smith4380 4 жыл бұрын
Great video, but sad about the camshaft gears ending up floating.
@ashishkumar74969
@ashishkumar74969 3 жыл бұрын
Learn AutoCAD Sketches, Drawings, Double Bearing Assembly , Engine Assembly, Fixtures Assembly, Wheelrim profile , and other Cad Softwares in very easy way #ASTALKS Subscribe to our channel for learning CAD(AutoCAD, Solidworks,Creo, Catia, Revit Architecture, 3D Max, Staadpro, Ansys), Computer( All Course's), English, Music, Tution, NTT.
@oz5750
@oz5750 3 жыл бұрын
.
@oz5750
@oz5750 3 жыл бұрын
@@ashishkumar74969 ,., ,,,
@akkig1238
@akkig1238 5 жыл бұрын
where should i get pdf file or detailed drawing of this assembly
@hulakazham120
@hulakazham120 4 жыл бұрын
Very cool work ! 👌
@ashishkumar74969
@ashishkumar74969 3 жыл бұрын
Great Video sir.. i have learned also.
@carbon273
@carbon273 5 жыл бұрын
Anybody else having the issue where the rocker keeps flipping orientation when applying the cam mate to the cams on the cam shaft?
@semihbayraktar1015
@semihbayraktar1015 5 жыл бұрын
Yes I have the issue and tried many solution but I cant it
@avinashn9945
@avinashn9945 4 жыл бұрын
did you find the solution
@venkateshbiradar2697
@venkateshbiradar2697 4 жыл бұрын
Plzzz, upload part drawings with dimensions
@JohnnyDee9000
@JohnnyDee9000 7 ай бұрын
This is awesome! So excited!
@kaosantiorks
@kaosantiorks 5 жыл бұрын
Genial tutorial, buen trabajo!!!
@300ml_brasil
@300ml_brasil 5 жыл бұрын
did you see it? its shit.
@seanhammond3443
@seanhammond3443 4 жыл бұрын
56:09 what are the specs of the tapped hole because i dont get that lip on top of the cut
@Madmate9161
@Madmate9161 4 жыл бұрын
I have the same problem, how did you fix it
@ahmedmaher4667
@ahmedmaher4667 3 жыл бұрын
@@Madmate9161 Be sure that you are normal on the surface before you tap, because the surface you are trying to tap on it is inclined to the plane
@kareem1728
@kareem1728 5 жыл бұрын
how can i create the lofted cut from 1:10:40 in CREO 5.0?
@olalrighty2437
@olalrighty2437 4 жыл бұрын
Try using a swept blend cut.
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@muhammadosama1891
@muhammadosama1891 3 жыл бұрын
Thank you so much sir, first time made Engine Thanks a lot :))))
@nishantkumarpradhan
@nishantkumarpradhan 3 жыл бұрын
Osama Bro. Congratulation, you did that. Can you send me the 2D drawing of all the parts please. on my Email Id " nishantkumar.pradhan@gmail.com "
@WalterJSouza-yl8pf
@WalterJSouza-yl8pf 5 ай бұрын
Excelente explicação.
@xuancuongbui764
@xuancuongbui764 4 жыл бұрын
47:26 The "Rocker arm" part is different from the previous assembly.
@giorgioforcella2609
@giorgioforcella2609 4 жыл бұрын
kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html here you can find the rocker arm used
@yzl6284
@yzl6284 4 жыл бұрын
@@giorgioforcella2609 so the one in another playlist is the one he is using ?
@giorgioforcella2609
@giorgioforcella2609 4 жыл бұрын
@@yzl6284 Exactly
@kathirvelmuruganandam7214
@kathirvelmuruganandam7214 3 жыл бұрын
@@giorgioforcella2609 Thank you Brother.
@Vanguyen09
@Vanguyen09 2 жыл бұрын
Xuan Cuong Bui. Did you built and post this engine? Very good job. Thank you. I learn a lot overall from this video. Especially on (boundary boss, loft, sweep, and mating on cam, mirror copy or rotate on cam shaft). I have 2021 version, but I can figure out to match you version of mating in solidworks. There is a little problem on (intaker manifold, I did mirror and copy, but the mirror part only matching one side of cylinder head, the other side was off air vents). Can you let me know what's wrong? Thank you.
@andreeew1123
@andreeew1123 4 жыл бұрын
can you please gives as link /pdf to dimensions of those parts i would like to try it by my self without tutorial
@ahmeds4
@ahmeds4 4 жыл бұрын
You can put your own dimensions and just follow the process
@andreeew1123
@andreeew1123 4 жыл бұрын
@@ahmeds4 but i want to do it by myself without the tutorial
@The_Artful_Thinker
@The_Artful_Thinker 4 жыл бұрын
Yes .. we want pdf or link of those parts please.
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@kushagraroy5081
@kushagraroy5081 4 жыл бұрын
@@The_Artful_Thinker Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com
@jonathanharkerdpz5906
@jonathanharkerdpz5906 3 жыл бұрын
Great video, thank you!!!.
@cristiankilon1706
@cristiankilon1706 11 ай бұрын
I just adore your videos
@PUNISHERMARKO
@PUNISHERMARKO 6 жыл бұрын
next video W16 from bugatti veyron :) took me forever to do it myself. Learning from mistakes :)
@PUNISHERMARKO
@PUNISHERMARKO 6 жыл бұрын
? I have already done W16 engine
@pateljay1665
@pateljay1665 5 жыл бұрын
Upload w16 tutorial
@vasudevan3195
@vasudevan3195 5 жыл бұрын
Rocker arm 4 first part 1 is not drowned for assembly. Different parts of part1 in assembly and drawing. Simply "Rocker arm part 1 is missing" Check it please. U drowned a part in @57:23 and but in assembly u used different part @1:01:30
@kevinleonsanchez7111
@kevinleonsanchez7111 4 жыл бұрын
Yes, I also saw it. It was a different kind of rocket arm which he made than the one in assembly.
@kevinleonsanchez7111
@kevinleonsanchez7111 4 жыл бұрын
I think this is the rocker arm kzfaq.info/get/bejne/e9OcfZSS0NacqoU.html
@bejaouirached8419
@bejaouirached8419 4 жыл бұрын
@@kevinleonsanchez7111 thank you Kevin that's the part i need it.save me a lot of time
@AverageNeighbor
@AverageNeighbor 4 жыл бұрын
are the turbos driven off the timing belt? awesome video it would take me 3.4 weeks to build that not 3.4 hrs
@cevdetuslu5031
@cevdetuslu5031 4 жыл бұрын
kardesm guzel yapmissin aferm tebrik etdim
@jumbo999614
@jumbo999614 5 жыл бұрын
Anyone has the problem as mine 3:15:04 the rockerarm loses its alignment? This happens whenever i save the assembly. I have to manually realign it.
@haxlow5420
@haxlow5420 5 жыл бұрын
Did you find any solution for this ?
@ShadiSaffour
@ShadiSaffour 4 жыл бұрын
i have the same problem as well, any solution?
@dhruvenshingadiya127
@dhruvenshingadiya127 3 жыл бұрын
Same problem hear bro plz solution send me plz
@jumbo999614
@jumbo999614 3 жыл бұрын
@@dhruvenshingadiya127 Sorry. No solution. Maybe it's program's bug.
@fajoieachabbak8709
@fajoieachabbak8709 3 жыл бұрын
​@@dhruvenshingadiya127 you have to go 'advanced mates' when you select for Distance , Maximum value is 48mm and minimum value is 0 and done
@vasudeokatdare6530
@vasudeokatdare6530 4 жыл бұрын
DEAR SIR, IS THERE ANY MISS MATCH IN ROCKER ARM PART DRAWING? CAUSE,SHOWN IN TUTORIAL & SELECTED FOR ASSEMBLY IS NOT MATCH WITH EACH OTHER. PLEASE GUIDE ME.
@thaneshprasath6279
@thaneshprasath6279 4 жыл бұрын
Yes even I seen it now what to do ?
@mayankchikane8797
@mayankchikane8797 3 жыл бұрын
@@thaneshprasath6279 check his playlist for separate parts
@KyNguyenCoLuoi-AutoChess
@KyNguyenCoLuoi-AutoChess 8 ай бұрын
I can't believe what I just witnessed! Hilarious and totally unexpected.
@ewertonrafeldasilvasilva6149
@ewertonrafeldasilvasilva6149 3 жыл бұрын
Um dia eu chego nesse nível 😄
@ozguniloglu7133
@ozguniloglu7133 5 жыл бұрын
At the beginning of the video, on the right, while sketching the third circle the diameter was given as 76.2 mm but this is tricky ! The real dimension is something like 6.. Why did you do this ? Whats your purpose ?
@aldebj7379
@aldebj7379 5 жыл бұрын
You are complety right, I was confused about the dimensions.
@endurenova
@endurenova 5 жыл бұрын
Somehow!!! I waas confused too!!
@silvinosanchez8841
@silvinosanchez8841 5 жыл бұрын
So. What it is the correct dimension? I confused to..
@mucilan217
@mucilan217 5 жыл бұрын
i love your courage, sweet! i was confused so much!!
@Shepard5544
@Shepard5544 4 жыл бұрын
@@silvinosanchez8841 At 4:21, you can see that is 63.50
SolidWorks RE Tutorial # 335: Beginner Tractor complete video
3:49:31
SolidWorks Tutorial ☺
Рет қаралды 3,4 МЛН
1🥺🎉 #thankyou
00:29
はじめしゃちょー(hajime)
Рет қаралды 81 МЛН
1❤️#thankyou #shorts
00:21
あみか部
Рет қаралды 70 МЛН
100😭🎉 #thankyou
00:28
はじめしゃちょー(hajime)
Рет қаралды 57 МЛН
3D Car Modeling with Rhino 7 SubD Tools [4/8]
3:48:44
Gediminas Kirdeikis
Рет қаралды 144 М.
SolidWorks RE Tutorial # 337: DC Motor complete video
2:49:13
SolidWorks Tutorial ☺
Рет қаралды 1,5 МЛН
Live Modeling a Spinning Wheel in SketchUp
3:45:22
SketchUp
Рет қаралды 251 М.
Build a Realtime Chat App in React Native (tutorial for beginners) 🔴
3:49:50
US Navy Testing Monstrously Powerful $500 Million Railgun
15:56
The Daily Aviation
Рет қаралды 54 М.
Tự chế bộ chuyển nhanh 3 kẹp khoan siêu hiệu quả
11:57
khám phá và sáng tạo
Рет қаралды 41 М.
Solidworks tutorial | How to make Helical Bevel Gear in SolidWorks
17:33
CAD CAM TUTORIAL BY MAHTABALAM
Рет қаралды 1,2 МЛН
A rarely known lathe technique for making boring heads
19:56
Mekanik Mesin
Рет қаралды 27 М.
Crane Hook in SolidWorks
26:37
CAD CAM TUTORIAL BY MAHTABALAM
Рет қаралды 440 М.
1🥺🎉 #thankyou
00:29
はじめしゃちょー(hajime)
Рет қаралды 81 МЛН