Solidworks Simulation tutorial | Steel Structure Simulation in Solidworks

No video

Solidworks Simulation tutorial | Steel Structure Simulation in Solidworks

Рет қаралды 715,534

Күн бұрын

/ @cadcamtutorialbymahta...
You Can Support our Channel for more tutorials.
Here we will learn about Steel Structure Simulation in Solidworks (steel structure test), we will study bout deformation & stress on a structure with the help of Solidworks Simulation.Basics of Simulations for beginners
Thanks for Watching,
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
like Facebook page.
/ cadcamtutorial
Subscribe our KZfaq Channel.
/ cadcamtutorial

Пікірлер: 237

@sabreteeth1212 4 жыл бұрын

I don't know what I would do without Indian Solidworks tutorials on youtube. Thanks always from the US

@alessandromorelli5866 3 жыл бұрын

The power of globalization, lad

@AMIRULHAQE 2 жыл бұрын

😍🔥

@reallymusa_ Жыл бұрын

Huh word

@ArunKumar-ol8wn 7 жыл бұрын

thank you so much sir.....the simulation parts are not covered in the syllabus of any solidworks courses. Keep on sharing such videos. After doing simple videos, please do some difficult simulations so one can learn thoroughly. Please cover all the parts in the simulation module. Thank you.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Arun Kumar Thanks Soon i will start full series of Solidworks Simulation,

@sakibayub6087 Жыл бұрын

Please add more simulations

@Simon28298 7 жыл бұрын

I can believe you go so deep with this program you are a great teacher!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

soon i will start simulation series & we will learn about all the things related to Simulation,

@chekobikerbmx 5 жыл бұрын

Of course you had to be Indian, you guys are awesome in this cad, cam, cae thing and also as teachers, i understood everything and i don 't speak english very well, best regards from Mexico.

@chillwithmonkey6779 4 ай бұрын

Thanks bro. You saved my life. I was working on my final project this video was the one I needed. Thanks again

@dalvadigaurang8234 6 жыл бұрын

Excellent teaching . If possible than add more simulations tutorial

@TheRoze102 4 жыл бұрын

This is the best channel for Solidworks

@muhammedg-tips1584 3 ай бұрын

nice work man it's like a 1h introduction just in 9 min ♥

@carlos2ohh 4 жыл бұрын

Excellent video! Simple, straight to the point and very useful!

@masihamini313 4 жыл бұрын

hello,i am student of mechnical engineer and i so glad to meet and speak with another mechnacal engineer

@anuragraikwar6705 5 жыл бұрын

Now I am in love with #solid works.. And the way you explains.. Awesome 🎉🎉

@ninadsbhatt100 9 ай бұрын

This is the best for beginners.

@agstechnicalsupport 4 жыл бұрын

Pretty well explained. A good example of SolidWorks simulation. Thank you for posting such instructional content !

@nimsarayasith 3 күн бұрын

best video. very easy to understand

@slautotube1065 3 жыл бұрын

You’re not just a god. You’re actually a huge temple❤️ big thumbs up for the support

@manojsinghjalal565 2 жыл бұрын

sir maine aapki kafi video dekhi hai, aap koi live class bhe arrange kar dejye , kam se kam hum log apne guru ko dekh to lenge isi bahane. aap ka ashirwad mil jyega.

@saulfernando557 3 жыл бұрын

Sabes que llegaste al nivel de experto cuando los únicos temas que encuentras están en este idioma.

@bendemanish1446 6 жыл бұрын

of course you are the best teacher in my entire life.

@EnmandsBand1 2 жыл бұрын

great tutorial, thank you - just did my very first SW simulation :-D

@dingambayebienvenu 4 жыл бұрын

My first time to enjoy Soliworks 😁😁👏🏽👏🏽👏🏽Congrats for your good tuto

@dreamsareme 7 жыл бұрын

Thanks! I'm used to doing stress analysis using Ansys nice to to see it on solidworks !

@rylandzain3526 3 жыл бұрын

i dont mean to be so offtopic but does anyone know of a tool to get back into an instagram account..? I was dumb lost my password. I appreciate any tricks you can offer me!

@kaushik00710 4 жыл бұрын

Sir please make tutorial for thermal study in simulation

@maronn44 4 жыл бұрын

なんて言ってるかは全然わからんかったけど、やり方はわかりました！ありがとうございます☺︎

@ujjalgour8643 7 жыл бұрын

Sir it's really helpful videos. I learn solidworks more and more .. Thank you so much sir ..

@mubafaw Жыл бұрын

You are the best!!! Thank you so much. You make it so easy to follow😃👍

@oneundecided 4 жыл бұрын

Thank you for the video! I have a question -what if I want to apply the force not on the surface but on the line, but not the edge line. How this can be achieved? How to add the force application line to the model?

@chaoticproductions6332 3 жыл бұрын

we need to split surface and apply load on it

@Mike35219 2 жыл бұрын

Excellent educational video. Many thanks, Please upload more of this type videos.

@jaymakwana2465 2 жыл бұрын

Thank you sir for easily cover the simulation module.

@isaacfranks4775 3 жыл бұрын

Random Indian KZfaq tutorials. Saving my ass for over a decade.

@abbasraj2750 5 жыл бұрын

please sir make a tutorial on full analysis of chassis. it will be very helpful as your tutorials are very much easy to understand

@mohamedmostafa-be1xy 7 жыл бұрын

. sir iwould like to thank you because i learnt lots of things from you . I hope to explain the flow simulation

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

mohamed mostafa Thank you so much :) i will try my level best.

@mohamedmostafa-be1xy 7 жыл бұрын

sir I want to send to you picture of my work to tell me about my level in solid work if it possible

@MohannaGh 7 ай бұрын

You're always a big help! thank you ❤

@theliger1980 3 жыл бұрын

Sure i like this tutorial Thanks for your effort and sharing of information

@prshntjosy6399 Жыл бұрын

Talented sir you are Talented 🥰

@kishorsolanki1503 4 жыл бұрын

Sir can you make an flow simulation tutorial...I haven't used that yet and I find your methods and tutorials quite good

@user-ue9ru1hh9o 5 жыл бұрын

First of all thank you very much for the video. Secondly, how can I see the exact values of the strain and the stress in any place, not by the scale of the heat map. I want to point every place and know the stress/displacement. I do see the scale in the right side, but still I want to see the maximum value that occurs. Thank you.

@azhaghuvel883 2 жыл бұрын

Great teacher... thank you alot sir

@GagrinPNZ 6 жыл бұрын

Thank you. It's good to know how to split Face to calculate force for some area.

@hameedetemadi8390 7 жыл бұрын

Hello. What is yours and which country you are from? And now where are you studying. I thank you for the good training you teach. I'm happy to answer.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Hameed Etemadi Hi i am from India & i am working in Saudiarab, Solidworks is smaller part of my work,

@Zaeem_Malik 7 жыл бұрын

you are mechanical engineer? right?

@Slumdog_Engineer Жыл бұрын

Thank you for the video. Could you please, show how to understand results of such an analysis?

@akbaraliagharia567 3 жыл бұрын

Does solidworks 2016 have simulation?

@SaifulIslam-li2sq 9 ай бұрын

Good job,,,,, it was most helpful,,,

@ashish_chauhan 4 жыл бұрын

Can you please make a video on drop test? And Is CFD available on solidworks?

@user-ms4li1pe2b 4 жыл бұрын

Excellent teacher brother.

@siguerhakim4723 4 жыл бұрын

Thanks for the detailed and helpful explanation

@Skarpur 4 жыл бұрын

Excellent introduction mate, thank you.

@amermurtaja7595 7 жыл бұрын

Please do a series on Steel Structure Simulation in Solidworks

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Soon i will start a Simulation series,

@mastercat 7 жыл бұрын

include simulation with assembly

@beingloved3505 5 жыл бұрын

can you please help me i want to assemble a cpu for ansys Simulation what would be the configuration in low price

@mianabdulsvlogs6875 2 жыл бұрын

Hi i am watching your videos for a long time i need your help. can you show me how to do rubber drop or impact test on solidworks I'll be thankful to you for this ☺️

@manjuhavoji2920 5 жыл бұрын

thank u so much sir for making vedios for simulation and others of solidworks so I learned a lot of things from ur lecturer and i like ur way of communication .

@krishnajagadeesh6307 Жыл бұрын

Please make one video for udl load apply nonlinear analysis please sir

@724_vaibhavjamsandekar9 Жыл бұрын

Many people Sells the same things but some Great Teachers do it for Free ^o^

@panchalmitesh8088 4 жыл бұрын

Excellent teaching

@chillwithmonkey6779 4 ай бұрын

Thank you!

@krishnajagadeesh6307 5 жыл бұрын

I am Krishna I am your Chanel one of the subscribers I need how to 6 MTR length ladder how to apply UD load please make one vedieo sir

@ferdicanerbayram2447 7 жыл бұрын

Thanks for this nice tutorial

@MushtaqAhmad-ro9qm 8 ай бұрын

Sir can u write an algorithm so that the whole FEA analysis process is done automatically?

@engineer_jakir 5 жыл бұрын

Thank you, Sir, for this video. It was very helpful.

@KaryawanNgAnggur Жыл бұрын

Thanks

@MuhamadIqbal-gg1eg 5 жыл бұрын

Thank you so much..really helping..thumbs up!

@JitendraKumar-ux4dx 5 жыл бұрын

Sir can you upload full solidworks simulation (fea analysis) videos. (Static analysis, buckling analysis, thermal analysis, dynamic analysis, motion analysis, non linear, drop test, pressure vessel analysis etc.)

@aanibadurrahman3584 2 жыл бұрын

thank you so much for the tutorial!

@swooshwoosh 2 жыл бұрын

Thank You!

@sumitrai6857 7 жыл бұрын

great job sir 🙌👌

@ashishbhoj8605 3 жыл бұрын

Sir please make video on braided hose

@omaromarrr5566 3 жыл бұрын

thank you so much

@Aman_shetye 2 жыл бұрын

Thank you sir ❤️

@dheerajpatil6125 4 жыл бұрын

Thanks for the video I have one query! How we can find deflection in simply supported beam

@stanley19970911 6 жыл бұрын

Great video, it helps me a lot

@amina_vlog23 4 жыл бұрын

Thank you sir, it was really helpful

@softgalaxy 2 жыл бұрын

Nice presentation!

@imranmdyatim3674 Жыл бұрын

Good sharing. Hi sir. How to determine the max load before the beam break down? The results show maximum & minimum for stress, strain & displacement only.

@paulwilhelm7828 Жыл бұрын

Compare the maximum stress to the yield stress of your material. After a simulation is run, if the maximum stress is less than the yield stress of the material, the beam will not break. An engineer will usually make sure the maximum stress is at most half as much as the yield stress in real world scenarios. For the material in the video, the yield strength is listed as 460 MPa and the maximum stress is listed as 28.17 MPa, so the part will not fail (factor of safety is about 16, or max stress is about one sixteenth the yield stress). Typically, an engineer will be designing a part for a specific purpose (for example, they could be designing a bridge) and therefore know the load that will be applied to that part (the bridge must not break when it's full of cars, which weigh x much and therefore apply y force to the pavement). Therefore, the SolidWorks interface is built to allow you to input that load and see the resulting stress. As far as I know, the only way to input a stress and see the resulting load is to iterate static simulations with different applied loads to approach the desired stress manually. There might be a way to have the software do it, but I haven't been able to find that functionality if it exists. Hope this helps

@wlk1757 9 ай бұрын

Hi guys, if the max Von Mises stress is less than the yield strength, so it means the part is safe to use under the load right?

@d.lokanadharaju6546 4 жыл бұрын

Very Interesting teaching. Your institute available in Hyderabad. Address please.

@SonuKumar-np4kg 6 жыл бұрын

Great vidio make the shark and movement in tail and locomotion

@lettersofabby6326 2 жыл бұрын

Hiii, we will be designing morphing wing structure, what’s best to study with regards to that in solidworks simulation? Thank youu

@user-sobhanallah 4 жыл бұрын

Very good explaining

@hudsonr.743 3 жыл бұрын

Thanks for the help!

@MOHDIMRAN-yt7hp 3 жыл бұрын

Sir, parts ki assembly karne ke baad analysis kese karte hai. For example drone wale tutorial ka analysis.plzz Sir reply karna

@HowitsDesigned Жыл бұрын

Great tutorial!

@user-nt5cg1oq7p 2 жыл бұрын

you great thank you

@jededmonds7624 3 жыл бұрын

Thankyou - very helpful

@Access2avinash 6 жыл бұрын

Thank you, sir.

@calebpilafas8397 Жыл бұрын

In my model, I have I-Beam structural members attached to plates with holes in it to allow for bolt attachments. However, the I-Beam continues to disappear. Do you know what it could be?

@zhengyangsong 4 жыл бұрын

Thank you very much, sir!!!

@sandipbohat6902 5 жыл бұрын

Sir it's a nice video, but I need to know why don't you mesh the component before run for the results.

@Papadopoulos13th 4 жыл бұрын

VERY HELPFULL THANK YOU VERY MUCH

@sagar31845 6 жыл бұрын

thank you so much god bless you

@aakashgupta4476 5 жыл бұрын

needed more content and detaileed expanation on simulation

@dgb5820 2 жыл бұрын

Awesomeness

@anurag9392 7 жыл бұрын

can you make a tutorial on simulation of centrifugal fan? Also, is it possible to calculate capacity?

@aleksandrbabenko4009 7 жыл бұрын

You can write me a message about centrifugal fan. Maybe I will can help you. babenkosander@gmail.com

@RohitKumar-xi8df 4 жыл бұрын

Hi sir Can you please tell me that which subjects i need to study so that i can simulate any product easily?

@NNigamji Жыл бұрын

Sir ! Simulation & Analysis feature are given in SolidWorks so do we not need to learn any separate Analysis software like LS Dyna, Ansys etc. if I want to learn analysis so ?

@manojyadav-yc5db 5 жыл бұрын

Bro can you make an video on hvac model flow simulation (confrence room with air conditioning)

@ajeesh3485 Жыл бұрын

do you have any video for self weight analyis

@Kainth_punjabi_vlogger 5 жыл бұрын

thank u soo much...….very helpful

@sachinnaik5411 5 жыл бұрын

Now a days which is best software to learn for mechanical student?

@anandapodder8542 6 жыл бұрын

Sir pls make a simulation video with stress strain curve with this model

@Mr.MingJin 6 жыл бұрын

Dear sir, can you tell me how to simulate this model but two part connect by weldment

@Mohankumar-pg3pi 4 жыл бұрын

Can we provide the simulation duration like one hours or 15min. After that what will the impact on the structure.

@armandoc2729 4 жыл бұрын

Hola maestro buenas tardes , quiero hacer analisis estatico de mi trabajo , he visto su video muchas veces , pero no puedo hacer bien mi analisis estatico , podria ayudarme por favor Soy estudiante de ingenieria en mecatronica , nunca habia usado Solidworks , pero gracias a sus videos pude una nave industrial que se encuentra en mi escuela , pero al momento de hacer mi analisis no me deja crear la malla, agradeceria mucho su ayuda