No video
SolidWorks Tutorial
Рет қаралды 102,254
Күн бұрын►Engine will be completed on :► • Project 10: V6 Engine
►Pocket MultiTool ALL: ► • Project 9: Pocket Mult...
►Tractor:► • Project7: Tractor
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
----------------------------------------------------------------------------------
All dimensions are in mm/g/s/ISO - Based on true dimensioning!
---------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
---------------------------------------------------------------------------------
The average length of a tutorial is 10 min., if longer, it's divided!
--------------------------------------------------------------------------------
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful!
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketch
- SolidWorks Surface
- SolidWorks Motion
- SolidWorks Weldments
- SolidWorks Mold Design
- SolidWorks Simulation
And MORE
►►►SUBSCRIBE ◄◄◄
----------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
------------------------------------------------------------------------------------
----- ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ -----
------------------------------------------------------------------------------------
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
▬Facebook► / solidworks.tutorial.page
▬Google+:► plus.google.co...
▬Donation :► www.paypal.com...
@yogeshkadam4321 5 жыл бұрын
THE MORE I WATCH YOUR VIDEOS, THE MORE I'M LOSING CONFIDENCE IN SOLIDWORKS.
@luluiscar 8 жыл бұрын
This video is not very clear
@bretonkyle 5 жыл бұрын
This is not how a turbo works nor is it a supercharger. This is just a swirly intake tube
@houidimohamedamin4747 7 жыл бұрын
did you change the diameter of the circle in sketch 4,because 63.5 seemed a little too big while in the video it looked smaller.could be imagining things tho.
@ormeal15 6 жыл бұрын
50mm
@andrekarosso 7 жыл бұрын
Sketch 4, diameter 50mm.
@josezarate6838 4 жыл бұрын
Thanks, man. I´s always worried about that measure hahaha
@dragosalexandru6133 4 жыл бұрын
Thanks a lot!
@SmashingPumpkins87 4 жыл бұрын
the boundary boss/base in 4:30 doesn't work in the same way that he does, why? I've tryed to follow each instructions, but I suppose that the conflict concerns the green line of the profile.
@azithral4057 4 жыл бұрын
confirm "shell outwards"
@yuhu9386 8 жыл бұрын
seems a lot of critical steps are skipped or some dimensions are given wrong....failed to complete this drawing even though every step is closely followed
@ztruestile8837 6 жыл бұрын
I cant extrude cut through the middle part thing snail end
@Eldobaz 9 жыл бұрын
It seems you enabled Realview, what graphic card you use?
@danielbustos7801 8 жыл бұрын
I use nvidia gtx 960. Runs amazingly
@queshito2194 9 жыл бұрын
hey! your videos are awesome!!! but, one question..... how can i choose the material that you use? why you piece shines?? what is the option to choose this material??? please! tellme!
@ziad9156 2 жыл бұрын
kzfaq.info/get/bejne/jtmPjKtjnt_Pook.html that help you pro
@tvaliulis 9 жыл бұрын
Everything was fine except last moment big circle but no hole in middle so why there is a small extrude and hole in it could be without a hole as well?
@ahmedelasi6091 9 жыл бұрын
i want to have the dimensions can i ?
@emrekaya3017 9 жыл бұрын
I can not Planar surface. I get an error warning. Help me please
@danielbustos7801 8 жыл бұрын
he doesnt do it. he presses x
@amitjain1491 6 жыл бұрын
Can't apply the third variable fillet
@urieltapia1684 8 жыл бұрын
nunca hizo un grillete , me gustaria que subiera un video de ese tipo :) saludos,
@alissonsoares5264 8 жыл бұрын
how to let the piece well??
@LiamO5991 8 жыл бұрын
At 7:30 when you are using the planar surface tool, I'm just getting rebuild error due to 'non planar selection or open section' any suggestions?
@danielbustos7801 8 жыл бұрын
if you look he doesnt check it. he quits the action
@viewcycleblog5222 4 жыл бұрын
dude! this is not how a turbo works, where's the turbine? anyway thanks!
@nayanpatel1156 6 жыл бұрын
I pratice to make a air turbo but I applied shell is take 0.5 mm , my require 1.5 mm...what is problem I take 1.5mm??
@nayanpatel1156 6 жыл бұрын
In Creo 4.0
@bernardocaroli6799 8 жыл бұрын
what happens at 3:25?????
@jossuetmaldonado7753 8 жыл бұрын
jajajajaja
@eslam841 8 жыл бұрын
The triangle intersect with the body
@yyyoniii3245 9 жыл бұрын
at 2:08 it gives me "Cannot make two planar end faces to cap the side sheet"
@qiulinfan2043 9 жыл бұрын
I have the same problem
@oprofiles 8 жыл бұрын
stuck here. :/
@Mariona522 8 жыл бұрын
Hola, tengo una tuberia con el SolidWrorks por la qual pasa aire, i dentro hay una pelota libre. Me gustaría saber como simular el movimiento que hará la pelota en función del fluido que pasa por la tubería Alguien podría ayudarme? muchas gracias Mariona
@oscarabundez9063 4 жыл бұрын
The measurements are wrong and not clear
@karlbernhoff1603 5 жыл бұрын
Too call this an Air Turbo is a shame, there is nothing in this that would compress the air. Also you have two solid bodies that can't be combined and there is a wall between the bodies that would stop the airflow.
@arwidsson3676 9 жыл бұрын
At 9:30 my SW tell me that he can't make cut-extrude :/
@elmerbalentina5574 8 жыл бұрын
same for me
@Elbenlutscher 8 жыл бұрын
These are two seperate bodies
@ALVAROOgm 6 жыл бұрын
thats not a car turbo...
@beccatidaniele 8 жыл бұрын
WHAT HAPPENS AT 0:17 ???
@sagar.shorts 6 жыл бұрын
kzfaq.info/get/bejne/g56DbJiCya_Whmw.html 1 bar jrur dekhe is bache ko
@ass-gun1879 7 жыл бұрын
don't make fucking ellipse please !!!!!!!!
@vaypon9721 6 жыл бұрын
This video is terrible.
@TheSamN8 5 жыл бұрын
Maybe one of the worse tutorials I've even seen. To become clearer please don't change any dimensions without explain which one was modified and why you did it.
SolidWorks Tutorial ☺
Рет қаралды 133 М.
Joko Engineeringhelp
Рет қаралды 12 М.