SolidWorks Tutorial

No video

SolidWorks Tutorial

Рет қаралды 141,766

Күн бұрын

sw-tc.net/ solidworks tutorial 268 screwdriver bit cr-v pz2. If u have one, bring it & look at it (or google it), so maybe u can imagine another method than the used in this tutorial to make the tricky shape. (we though about the method used in make the citrus juice, but it is more complicated! Cr-V :►Chromium-vanadium, more about the nice features of this alloy :► en.wikipedia.o...
►juicer tutorial:► • SolidWorks Tutorial #2...
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

Пікірлер: 67

@scientist100 4 жыл бұрын

A lot of trial and error during this tutorial lol. This will be confusing for newbies as you tend to undo a lot of the work and try again. The idea and technique that you used is what I needed.

@What_Other_Hobbies 7 жыл бұрын

1, Keep 1 sketch visible and leave 2 center lines in it would save a lot of time. 2, Instead of using "Knit", intersect would work just find with few steps. 3, The first boundary surface is not a very good practice. Choose cylinder surface offset by 0 then extend, or just extrude a cylinder surface.

@skankhunt-zw6gg 4 жыл бұрын

Thank You. The Bounded Surface part was very advanced

@chriscadman5715 3 жыл бұрын

Nice work! If I did this, I'd eliminate the crotch surfaces (I realize you're showing what SW can do!) and use a swept rectangle cut instead. But if this part's going to made with a punch-press, then you don't need those surfaces. Also, most of the newer Posi-bits have ridges on the blades for gripping. Anyways, nice presentation at the end!

@wilhelmtaylor9863 5 жыл бұрын

The cuts between the philips blades is a simple grind operation. This is way more complicated than it needs to be, although it demonstrates a technique not oft used.

@errik0o 5 жыл бұрын

Learned a lot from this. One question, aren't the little cutouts on the body supposed to be in the other direction? letting it go into the bitholder but not out.

@redualein 6 жыл бұрын

Good music for this type of tutorials

@automan1223 7 жыл бұрын

Great bit, merge that with Snap-On s serrated splines on the tip and you got the meanest Phillips bit ever made !!

@kandasamyrajan 7 жыл бұрын

Excellent video.Particularly it is teaching usage of Boundary-Surface. Thank you very much.

@vasudeokatdare6530 6 жыл бұрын

Tutorial is good no doubt, But selection of commands must be slightly slow to see from freshers angle.(Reduce the command selection speed please) otherwise No Problem. Thanks !!

@nardaoeletronica Жыл бұрын

Excellent job

@peachfreude Жыл бұрын

hard for me but it was satisfying. will try other exercises too

@BleDLark 5 жыл бұрын

If you're trying to do this and you are having some troubles, let me explain to you how i solved them. In the minute 4:12, the correct measurment it is 2.54, not 2.50. In the minute 12:40, there's no need to select both curves as it is shown in the video, so you don't need to convert entities (which it was my option when i saw that) It will work out the same if you select the curve as a whole. But, if you're having trouble with that, make sure that your lines are well drawn, otherwise it will never work.

@emreaka3965 3 жыл бұрын

I couldn't do it. :(

@wilderrodriguez5317 5 жыл бұрын

Esta bonito pero creo que se puede mejorar, lo mas que me interesa es el trabajo con superficies tal vez tengas algunos vídeos de superficies avanzado .gracias de antemano

@adolfocarrillo248 7 жыл бұрын

in minute 4:12 the dimention of that square is not 2.50 mm it must be 2.54 mm otherwise the tip of the bit will have like a little fillet screwing up the piece.

@rubik777 6 жыл бұрын

2.51mm

@ShaneGardec 3 жыл бұрын

What kind of display settings are used to achieve this kind of presentation style?

@vasudeokatdare6530 6 жыл бұрын

How to mirror command use in feature stage,say one side of threads is available ,now I want to mirror on other leg of `U'Bolt. please explain...

@HustleRussell87 6 жыл бұрын

The beginning of the video shows the bit without fillets as lines - as if you were able to turn a filleted surface into an ultra-clean surface. Mind explaining how you did that?

@4n2earth22 6 жыл бұрын

Display Style: Shaded. (instead of Shaded With Lines)

@ravikumarkanagaraj690 6 жыл бұрын

While doing knit process surface plane is not available for me.. only three surfaces are available. need help about that

@rubik777 6 жыл бұрын

4:31 - 4:32 missing instructions

@angelgarza9366 4 жыл бұрын

you just repeat the last step 3 more times or mirror feature about a plane

@dennisvillalobos5894 7 жыл бұрын

Hi!, awesome video. Fast question: Where I can find the drawing of bit? It is just for try to draw it! Thank you!

@nikhilnick8886 5 жыл бұрын

grabcad.com/library/cr-v-pz2-1

@chetnaprajapati9483 3 жыл бұрын

how to sync two circle example:- one circle dia75mm and secound circle dia1000mm dia1000mm (1000mm-100mm=900mm) so change dia 75mm change (75mm+100=175mm) mins i one circle dia minuse so secound dia pluse is value how create बहुत बढ़िया पर मुझे ऐसा काम कुछ इस तरीके से करना हो तो कैसे करे कृपया बताये जैसे के एक circle 75mm dia का हे और दूसरा circle 1000mm dia का हे अगर में इन दोनों में से किसी की भी साइज़ बदलता हु तो वो एक दुसरे में pluse minus खुद्ब्खुद हो जाये जैसे के अगर में 75 mm dia में 25 mm जोड़ता हु तो वो dia 100mm हो गया पर जो दूसरा dia जो 1000 mm का हे वो 975mm खुद्ब्खुद हो जाये बस ऐसे कोई भी एक dia अगर pluse होता हे तो दूसरा dia खुद्ब्खुद minuse हो जाना चाहिए और कोई भी एक dia minuse होता हे तो दूसरा dia खुद्ब्खुद pluse हो जाना चाहिए हा पर जितना हम pluse या minuse करते हे उतना ही value एक दुसरे dia में pluse minuse होना चाहिए कृपया करके ये बताये ये कैसे हो सकता हे solidwork में ?

@lqw8371 4 жыл бұрын

I want to know how to make the luster and color!!!

@AshokKumar-gb1sw 3 жыл бұрын

Good job man

@AlaaElhamrawy 7 жыл бұрын

Excellent

@BerkinB 5 жыл бұрын

Very nice !!!

@Linkab 7 жыл бұрын

a cuestion is solid works 2017? good videos.

@patopeje1472 5 жыл бұрын

my head is in pluto after watch this

@neoseeker02 4 жыл бұрын

I was having trouble with the first boundary surface in the tutorial, then it just worked all of a sudden.

@Roberttang20 3 жыл бұрын

what did you do?

@hoannguyen750 5 жыл бұрын

thank you

@vyngo1335 7 жыл бұрын

I did exactly but could not select the curves as 12:40, someone can tell me why? tks

@kombuchamp 7 жыл бұрын

I solved it this way - I used the convert enteties on this curves before selecting them in boundary surface tool

@meetdalwadi 7 жыл бұрын

kombuchamp but how to convert entities on those curves?? I can't convert them.

@charlesxabier1891 7 жыл бұрын

i did it just selecting the curves without using the selectionmanager

@andreasprongidis5339 6 жыл бұрын

You have to hide some features that are related to the curves and show the sketch of the curves only.

@user-cy7so3ot9q 2 жыл бұрын

@@andreasprongidis5339 I tried this and it works, thank you so much:)

@pch4287 6 жыл бұрын

Amazing video

@jorgeg162 4 жыл бұрын

Are you in some type of race against time? What is your purpose making this video?

@jhormanetxeverry7247 7 жыл бұрын

Awesome!😃

@mehdifarhadi9709 6 жыл бұрын

very nice, thanks

@MyBilal19971 7 жыл бұрын

I can't select the group of entities at 12:27

@XzzVttll 7 жыл бұрын

hold ctrl

@sonik7452 7 жыл бұрын

В уроке построение сложное. Проще модель построить так: kzfaq.info/get/bejne/ib2Fg6mQupmpj6M.html Если знать технологию изготовления, то легко и построить модель. In the lesson, the construction is complex. It's easier to build a model like this: kzfaq.info/get/bejne/ib2Fg6mQupmpj6M.html If you know the manufacturing technology, then it's easy to build a model.

@rozbeldorival1274 7 жыл бұрын

Nice

@chubbyBunny94 6 жыл бұрын

y you no talk?!

@rodrigochiozzini 7 жыл бұрын

Great !!!!!

@FatihGTR 6 жыл бұрын

1 KURŞUN 2LİRA BİRADER

@user-wc3qv1te5p 6 жыл бұрын

wrong method to mak this .....

@ishanprajapati_1092 3 жыл бұрын

Ads bahut aati hai aapki videos mai

@timecop1983Two 2 жыл бұрын

And took only 24min!

@The1zaakk 7 жыл бұрын

first...!!!

@rajateja1111 6 жыл бұрын

Like u r face only

@josephschmoberg6778 7 жыл бұрын

How do you expect someone to learn from this video ... were you in a race with someone to see who can do it the fastest ....I might add, I"m sorry that you have no voice, and your hearing is bad ... other wise you would have never played this horrible music. To bad, could have been a good learning video, but it is not !

@4n2earth22 6 жыл бұрын

Suggestions: Mute the sound and put your favorite music on instead. Use the playback speed control KZfaq offers and slow it down till it matches your speed. Perhaps there is more to learning than complaining?