No video
SolidWorks Tutorial # 355: Hydraulic Gear Pump (Hydraulic Pump 3)
Рет қаралды 380,513
Күн бұрынSolidWorks Tutorial # 355: Hydraulic Gear Pump, (Hydraulic Pump 3)
Hydraulic Gear Pump 1 :► • SolidWorks Tutorial #2...
Hydraulic Gear Pump 2 :► • SolidWorks G Tutorial ...
/ @sw-tcnet
►SolidWorks Learning course (185+lectures):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Become a member in the channel here: / @sw-tcnet
►►►SUBSCRIBE ?!◄◄◄
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►Facebook:► / solidworks.tutorial.net
#SolidWorks #3D #Tutorial #SolidWorks_Tutorial
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
@odysseasa8542 2 жыл бұрын
Hello The parameters on the thread (1:53:30) are wrong. You shouldn't use tap & extruded thread. You should use metric die & cut thread. This giving perfect results!!! When you want to design a thread M10 the actual size is a little smaller after thread, something like 9.8 mm. In general in manufacturing operations about thread we remove material we don't ad.... My recommendation I think is giving more nice illustrated results. Great tutorial, Thank you!!!
@schmidthgnes295 2 жыл бұрын
Schmidt is a very good company out here in Colorado. They tend to get a lot of the paving contracts by cities and counties. Martin Marietta is the same way. Kewit and Wildcat construction get the majority of Cdot's contracts as well.
@mellzkey7200 2 жыл бұрын
Haba ng harang eh congrats po sayo madam enjoy sa pag vlog ingat lagi
@sojusliimtdflock 2 жыл бұрын
I'm loving the old-school 80s movie music🤣🤣👍🏽👍🏽
@soaringkhaled Жыл бұрын
Hi, I think the drain path on the bushing needs to point to the low pressure input port .. not high pressure output port
@Neptungarden 2 жыл бұрын
Great work! Drawings thought, would be magnificent.
@simonballon409 2 жыл бұрын
Wonderful designs. If anyone will need any hydraulic gear pumps, please feel free to get back to us. Thanks and have a great day. :- )
@josevieira5700 2 жыл бұрын
@@simonballon409 i would need the blueprints please! its for an engineering assignment
@simonballon409 2 жыл бұрын
@@josevieira5700 ? What?
@jojoceros1589 2 жыл бұрын
thanks for sharing the tutorial
@creatercreater2145 2 жыл бұрын
Hi, I'm new here (self-taught), and right now I'm reverse engineering a hydraulic pump very similar to this one. my pump has one inlet and two outlets. and for my tractor. the problem is that I don't know what tolerances I have to give. Can you get me information where they can tell you what tolerances to give to the various parts of the hydraulic pump? Thanks carlos from portugal.
@urgentstudiowith5280 2 жыл бұрын
superb work
@ElectricTechnology 2 жыл бұрын
great work
@adinaverson7193 2 жыл бұрын
Thank you
@fernandopachecomuguertegui5422 2 жыл бұрын
Great job, congratulations and thank you very much sir.
@bourun790 2 жыл бұрын
អគុណបង
@bpetnoi1472 2 жыл бұрын
Is it my imagination, but did the author forget the dowel pin hole on one end plate? Seem the drive side plate has a dowel pin hole, but not the non drive side.
@PUNISHERMARKO 2 жыл бұрын
another great tutorial. thank you :)
@microflowmeter 2 жыл бұрын
👍👍👍We can also provide hydraulic gear pumps
@asheul1 2 жыл бұрын
how can i do soft move on part like this.
@ianm1898 2 жыл бұрын
Hi if you have time please make another surfacing video. Maybe Nunchuck controller Thank you so much
@simonadebisi1174 Жыл бұрын
you didn't put holes for pins on the end cover.
@michaelfuentes2171 2 жыл бұрын
Is there any way to get the drawings for this model?
@santwanamishra3585 2 жыл бұрын
Please upload a tutorial on fixed geometry thrust pad bearing.
@DEEPACHAUHAN1196 2 жыл бұрын
Are you know about solidwork...i need draftman for my company ...from faridabad
@santwanamishra3585 2 жыл бұрын
@@DEEPACHAUHAN1196 no. I'm learning for my PhD work.
@DEEPACHAUHAN1196 2 жыл бұрын
@@santwanamishra3585 ok ji👍😊
@DavidFlores-uu6dy 2 жыл бұрын
hello, excellent design, you will have a design for a 3-body dry sump pump
@recepkaraman6327 2 жыл бұрын
hello, can you share the technical drawing of the pump, please?
@sulphurgamerz8488 2 жыл бұрын
What software is this
@wudemi2039 2 жыл бұрын
Nice drawing
@RixtronixLAB 2 жыл бұрын
Nice video, thanks :)
@ivausljebrka996 2 жыл бұрын
Filmovi i sa strane svojim radom prijateljima i u petak navečer na u j juhu s od njih je bilo i na kraju je ipak uspjela u petak navečer na poslu pa se tako i za tebg u tekućem računu
@jackybruceibarra3687 2 жыл бұрын
Hi solidworks tutorial do you have a assemble that have 50 parts? please I need your help🙏
@user-xf2gl4bk7b 2 жыл бұрын
Hello! Where can I see the drawings of these parts ?
@lynsheartvlog6696 2 жыл бұрын
Tamasak done host dikit na rin kita from ka bisaya
@jay__ 2 жыл бұрын
fire 🔥🔥🔥
@santoshsbelavagissbelavigi1248 2 жыл бұрын
Super
@timecop1983Two 2 жыл бұрын
I am also self taught 😌
@Ryohgantz 2 жыл бұрын
Cool 👍👍👍👍
@rickvisser8507 2 жыл бұрын
Maybe it's a good idea to put the names of the parts your making so I get an idea of what your doing
@Sw-tcNet 2 жыл бұрын
is shown on upper bar
@azamyasin5985 2 жыл бұрын
Please send 2d drawings of project
@williamhuang5329 2 жыл бұрын
Hanzhen harmonic gear , robot gear , joint acurator , over 30 years experience
@robertvelaz3633 2 жыл бұрын
nice
@khoanguyenvominh715 2 жыл бұрын
Do you have a drawing? I design by Inventor so the drawing is more suitable for me
@Sw-tcNet 2 жыл бұрын
subscribe first
@khoanguyenvominh715 2 жыл бұрын
@@Sw-tcNet i have subscribed
@Sw-tcNet 2 жыл бұрын
thanks for subscribing out channel. unfortunately we are not providing any files yet.
@user-zu4ly4sl3k 3 ай бұрын
Where's the part playlist... Like: Part 1 - kzfaq.info/get/bejne/h7t1odWLq6nDpH0.htmlsi=S_cxqrl-hO2GrJ5M&t=253 Part 2 - ... and the CAD drawing
@charlytvvlog5076 2 жыл бұрын
Ka bisaya tv vlog her
@hydroservice698 2 жыл бұрын
Sir denitioin p30 close loop pump ka ka video Pl inform me I am a service provider for hydraulics
@MesbahSalekeen 2 жыл бұрын
Can you supply the drawing as pdf. It will greatly help
@MesbahSalekeen 2 жыл бұрын
I mean like front view top view sectional view auxiliarry view. I appreciate your hard work, so the pdf will be a bonus
@Engineer_Mojtaba 2 жыл бұрын
Good time Please visit my channel
@kzflxy 2 жыл бұрын
Muy lento diseñar con este software, en la mitad del tiempo se realiza con autodesk y mejor
@symkadesign7052 2 жыл бұрын
Asombroso
@hardichanel281 2 жыл бұрын
#Engineering102
@erigibran9433 2 жыл бұрын
＃engineering102 like tosport
CAD CAM TUTORIAL BY MAHTABALAM
Рет қаралды 673 М.
Harley Quinn with the Joker
Рет қаралды 21 МЛН
SolidWorks Tutorial ☺
Рет қаралды 476