SolidWorks Tutorial Fill Pattern Basics

Рет қаралды 204,907

Күн бұрын

Hi all, this is a easy to follow tutorial in SolidWorks on the Fill Pattern Feature. This is a great tool for venting, grips and material weight reduction. This is a useful tool in sheet metal, injection molded plastics and rubberized handles.
Feel free to comment on the video if you have any questions or need further explanation. Thanks for watching, cheers!
CAD, cad modeling, 3d model, software
#solidworksforbeginners

Пікірлер: 39

@cadcaetutorial2039 5 ай бұрын

Amazing this sir

@domeasolidtuts 5 ай бұрын

Thank you! I hope it helped.

@larrykent196 2 жыл бұрын

This is a great help. Thank you for sharing cheers to you.

@domeasolidtuts 2 жыл бұрын

Anything to help everyone else get better and more efficient! Cheers!

@AsgarAli-un3em Жыл бұрын

@@domeasolidtuts

@oritburkush8008 2 жыл бұрын

Thank you for sharing and Happy New Year :)

@domeasolidtuts 2 жыл бұрын

Glad this helped! Happy New Year to you as well!🥂

@adityajethliya3956 3 жыл бұрын

When I am trying to select the sketch on body ,say, hut ,then when I am applying the fill pattern it is not showing any hole Whereas if I am selecting a surface then it's completely fine Please help

@domeasolidtuts 3 жыл бұрын

Is the sketch projected onto the body or is the sketch on a flat plane? The sketch for the first cut out must be planar (on a flat plane) in order to successfully fill a solid. You can try to create a sketch plane parallel to what you are cutting through and the fill pattern should work. Hope that helps! Please PM me with an example file so that I can assist you further if needed.

@herseys1 2 жыл бұрын

Hey I keep getting an error saying failed to validate instance count any idea why?

@domeasolidtuts 2 жыл бұрын

Hi Camilo! Are you trying to use a cut out or a solid body? That will help determine some next steps!

@inkognito2318 11 ай бұрын

Hello, thank you so much for this video, I've learned a lot and it's very helpful :) I have a question about the part 'Boss Body Pattern'. Everything works fine until 7:22 min. How do you insert the body? Or where does it come from? Unfortunately I can't find it. Could you explain this part in detail? Or do you know where I can learn more about that? I would be very grateful! Thank you again for your video. Best, Viktor

@domeasolidtuts 11 ай бұрын

@inkognito2318 Hi Viktor! Great question and I'm surprised no one asked it previously. I just placed a concentric sketch in the circular cut and used the Extrude command but uncheck "merge result" under the measurement. This created the "noodle" in the center of the circle, however, you could have sketched it anywhere within the container sketch and it would have worked. Hope this helps!

@domagojkrulic4016 2 жыл бұрын

Hello, can you please tell me with what line do you draw that conture lines? Line, centerline,...? Which else lines exist? You draw that lines in sketch or somewhere else? Thank you in advance! 😊

@domeasolidtuts 2 жыл бұрын

Hello Domagoj! The sketch lines are just regular lines drawn with the line tool, not centerlines. They must be regular lines to allow SolidWorks to define a solid boundary to contain your fill pattern. Yes, the boundary outlines are drawn on a sketch and then I use those sketches to define the fill boundary for the pattern. Hope that helps!

@dilipbagh7583 2 жыл бұрын

ẞh

@Bdickey 2 жыл бұрын

hi great video very helpful. however i am running into an issue when trying to create my fill. i have already created the hole in center and created a boundary line in a seperate sketch but when i am creating the fill pattern feature i am receiving an error that says "the direction selected for the area fill should be parallel to the contour" i cant tell what i am doing wrong but what exactly is 'the contour'? not sure how to remedy this problem.

@domeasolidtuts 2 жыл бұрын

Hey Blake! Is the sketch plane of your boundary line parallel to the plane of the hole? It has to be on a parallel plane, even if above or below the feature you are trying to pattern. Let me know if this solves your issue. If not, feel free to message or email me!

@Bdickey 2 жыл бұрын

@@domeasolidtuts problem solved thank you for your timely response :) i subscribed

@pkdjpk8070 Жыл бұрын

Ñ🎉mk

@rajaravi543 8 ай бұрын

😢🎉😢😢 2l2

@BalKrishnaYadav-ge1rp 6 ай бұрын

@@domeasolidtutsBH TV ka up on zu😊न नौ-नौ 😊बढणढगडच

@_Livefreeordie_ 2 жыл бұрын

Just curious, do you think fill patterns, when being used to create texturing for parts, is kind of obsolete in solidworks? I feel like I'd much rather just use the 3D texture tool that was added in 2019. I guess unless I wanted to make a custom never before made pattern that couldn't be found online and imported as a 3D texture image. Feel like for most cases though, the 3D texture tool is the way to go

@domeasolidtuts 2 жыл бұрын

It depends on your preference and the complexity of the texture. If it's a simple knurling texture contained within a sketch, then using extrusions to a point will definitely simplify the surfacing. Introducing mesh makes the surface less accurate and "muddy" to a point as you've lost some of the mathematical control of the geometry. This video was mainly focusing on how to use the fill command for cuts and potentially for extrusions. There's always 100 ways to solve a problem and you just gave those not familiar with the 3D texture tool another way!

@_Livefreeordie_ 2 жыл бұрын

@@domeasolidtuts Got it, I appreciate the quick response!

@MdAslam-xj2qm 6 ай бұрын

@@domeasolidtuts~

@domeasolidtuts 6 ай бұрын

@@MdAslam-xj2qm Got a question?

@user-vf4gx2dl5d 4 ай бұрын

Thank you so much sir👍👍👍👍👍❤❤❤❤😊😊😊😊

@domeasolidtuts 3 ай бұрын

Happy to help!

@kylepayton1036 2 жыл бұрын

Do you know how to allow partial patterns (/entities?) within the sketch?

@domeasolidtuts 2 жыл бұрын

Kyle, I'm not sure what you're referring to as partial, however, if you do not want to use all the instances generated, you can click on the "instances to skip" tab. There, highlight the instances you don't want active and hit the green check mark! Hope this helps. If not, please PM me and I can start a conversation to help.

@ArbajManyar-786 8 ай бұрын

@@domeasolidtuts 0

@domeasolidtuts 8 ай бұрын

@@ArbajManyar-786Hello Arbaj, is there a question?

@cadcaetutorial2039 5 ай бұрын

This fill pattern lecture for beginners is very nice this lecture sir

@domeasolidtuts 5 ай бұрын

Thank you! Hopefully you'll learn from this and upcoming videos.

@abyazcreations2782 3 ай бұрын

🎉😮😮🎉❤@@domeasolidtuts

@sadasivanp430 3 ай бұрын

@@domeasolidtuts🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 ji😢4