Solidworks tutorial | How to Make Hydraulic Pump in Solidworks

No video

Solidworks tutorial | How to Make Hydraulic Pump in Solidworks

Рет қаралды 288,010

Күн бұрын

in this tutorial video i will show you How to Make Hydraulic Pump in Solidworks with the help of sketch and feature tools.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook pages for drawings.
/ cadcamtutorial
/ cadcamtutorial

Пікірлер: 203

@Karim.A.B Жыл бұрын

This was my final project. I had to recreate everything in AutoCad 2D. Thank you for making it complicated yet very interesting

@pareshbodar1809 8 жыл бұрын

I AM STRICTLY FOLLOWING YOUR TUTORIALS SINCE WHEN I STARTED LEARNING SOLIDWORKS AWESOME KNOWLEDGE U HAVE

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching.

@dudsonu44 8 жыл бұрын

Sir u have best teaching skilled and u have best knowledge too sir i have learn solidworks 40% coz of u in 4 days

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching, i hope you enjoyed.

@JohnDoe-gv9jv 7 жыл бұрын

Finally, this took me a little while to do but it was worth the effort. I learned a lot thanks man.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

congrats, try to do Animation with Assembly .

@CaliforniaKid44 5 жыл бұрын

Some of us are using a Student Version of SolidWorks, without the Toolbox add-ins. Would be nice if you can provide the Spur Gear dimensions so we can draw the gear(s).

@talhamunshi6411 3 жыл бұрын

you are a very hardworking person.. Hats off

@youngc3276 7 жыл бұрын

thank you very much...you are best of best of teaching tutorial.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

thanks,

@almaarifa2592 6 жыл бұрын

I a m very happy to see your video thanks very match

@alexeykoval3351 4 жыл бұрын

First of all, Thank you for your lessons. Its helps very much! One thing I didn't understand in this lesson, why did you insert new similar components instead of copying or mirroring it (e.g lag sleeves or housing seal)?

@arturofuentes8973 4 жыл бұрын

Gracias, eres el mejor. Me alegra que tengas este espíritu de compartir el conocimiento. MIL GRACIAS

@makelmaktas9554 4 жыл бұрын

Dear cad cam tutorial im watching yr precious videos years and years along and following with great pleasure will you pls open o blog or sth and share dimentions jpg or pdf for all yr workings..so we can do with you and we can check ourself from yr videos

@mohammedhammoudi1989 7 жыл бұрын

well done techear and thanks for you for all the picese please can you teach us how we can make a mold injectin plastic?and again thanks

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

i have plan in future for mold injection tutorial.

@xBlackThoughts 2 жыл бұрын

You made a mistake when creating the Lag Sleeve. The 21.68 mm measurement below is incorrect. It should be 20.74 mm. When assembling the hydraulic pump at 1:21:44 you could already see the gap caused by the error at the top. You yourself noticed the error at 1:25:30 . You then worked with the movement lock, but that would not have been correct. Instead, you only should have changed the measurement to 20.74 mm at 54:50, not 21.68 mm. Then you wouldn't have had the assembly problems. 😉🙂 Anyway........awesome Video.

@IbnAbdullaah1 8 жыл бұрын

When you have made the sketch of the oil seal, the sketch isn't fully defined. May i ask why? Because i have learned that the sketch should be fully defined before you make an exctrude.

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

sketch should be fully defined before extruded because there will be chances of error but some time we confident that there is no error or we left some unwanted information which will not affect our geometry. due to time shortage some time i prefer to skip some unwanted dimensions.

@projectofscientistob7878 2 жыл бұрын

Because he used the advance options. Eg: coincident, equall, parallel and others

@dunn-ng5878 7 жыл бұрын

you are awesome and the best in Solidworks tutorial. Personal question for you, dimensions in your tutorial is actually from real part or design by yourself?

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

its non Standard dimension taken from Grabcad,

@MR-ix4bn 2 жыл бұрын

made in GermOny 😀best regards from Germany

@jorgeh0000 5 жыл бұрын

muy bueno su TRABAJO. Esto es diseñar. gracias por subir videos con esta calidad.

@rianafamilyaktivitasdankue1007 Жыл бұрын

Masya Allah...ilmu yang berguna sekali ini...👍

@abdullahnasser3959 8 жыл бұрын

truth all this group of wonderful video thanks

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thank you Sir, i wish to do better than this.

@valdircarlos6769 9 ай бұрын

Professor MAHTABALAM always teaches based on good market practices. I would like to see a simulation of a 100 m2 metal warehouse. On 03/11/2023.

@kailashsingh9737 Жыл бұрын

Very nice sir

@MathTutorVideos 6 жыл бұрын

How did you come up with 15.23" and 37" early on? Did you get this from a schematic you were following or do a bunch of pre-calculations to figure out how everything would fit together when you went to make your assembly etc?

@shivabalasubramanian1878 6 жыл бұрын

Excellent Tutorial.. learned bunch off stuffs

@hazemgad1243 4 жыл бұрын

please can i convert entities on a plan from one sketch to another in the same part or even to another part instead of repeating some sketches . Great work thanks

@tireecetarmmakinalar5083 2 жыл бұрын

very very good perfect pump

@chappyaugusto 3 жыл бұрын

can you do fundamentals of engineering > cause it you do, I like to buy your tutorials..

@umarali367 Жыл бұрын

Thank you very much, very helpful

@markwitherspoon5736 7 жыл бұрын

Great video! I learned a few new tricks. Cool animation.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks.

@mydreams299 7 жыл бұрын

very usful . thankyou.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks for watching i hope you enjoyed.

@mostafanoseur2146 7 жыл бұрын

wow great doing , can`t wait for more videos

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks,

@mostafanoseur2146 7 жыл бұрын

accept my apologies but i have a problem with inserting gears in solid works from the tool box : what even the module and the number of teeth the program only accepts a fixed number of teeth (which is 12 teeth no more or less). thank for the present respond :)

@HARLYZZCCC 8 жыл бұрын

NICE VIDEO!!

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching, i hope you enjoyed.

@gurutechinformation Жыл бұрын

Thanks sir ❤❤❤❤❤❤❤

@mohamadkhatib8624 8 жыл бұрын

i really liked very nice pump ,can make air compressor thank you

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching, i am planing to make air compressor but the video will be very lengthy anyways i will try in future.

@1234palakshah 7 жыл бұрын

thankyou so much for the video.. great teaching!!!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

thanks

@joaovictormarques4136 6 жыл бұрын

Could you make the 2D design of the hydraulic pump available?

@Izeball 8 жыл бұрын

Just love your videos! Pity that I could not use the gears from Toolbox, It's not working on my SW, so I had to delete my work :(

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

make gear mates it looks better while running the gears.

@rodrigochiozzini 7 жыл бұрын

Parabéns pelo conteúdo, didática de muito fácil entendimento

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks,

@manojr5257 7 жыл бұрын

Thank you for the nice tut. It would be great if you can upload drawing with dimensions for all the parts.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Manoj Randeni Thanks i will try my level best.

@manojr5257 7 жыл бұрын

CAD CAM TUTORIAL look forward for that ☺️

@yosefshambel1281 6 жыл бұрын

am glad you are here

@youngchae7468 5 жыл бұрын

Thanks . Very help tutorial.

@jdmather5755 7 жыл бұрын

1:16:43 the triangle cutter is under the fillet. This is not physically possible in the real world. Also, the cut does not extend clear of the end of the part.

@thebrownmamba7707 6 жыл бұрын

i cant make that thread maybe this is the issue

@gurutechinformation Жыл бұрын

Thanks sir❤

@kolbalish2437 2 жыл бұрын

Which version of solid works is good ? And which version is he working with the tutorial ?

@batuhanun8476 8 жыл бұрын

U re the best dude

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching, i hope you enjoyed.

@user-le3sr6ed9h 7 жыл бұрын

شكرا استاذي أنت عبقري

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

welcome.

@user-le3sr6ed9h 7 жыл бұрын

Thank you, professorial all these lessons learned, and this wonderful astronomical explanation is simple respect for me, and thank you very much and I wish I could explain to me how to print a drawing on paper after the completion of the design and the commands used and thank you for everything

@CADTUTORIALmax 2 жыл бұрын

good video, thank you for share

@mohdazriabdrahman4126 7 жыл бұрын

Thanks for the video. I have problems with spur gear. The display is the same. Although I make different number of teeth.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

can you elaborate?

@mohdazriabdrahman4126 7 жыл бұрын

I tried making 2 set of spur gear. 1 with example 40 sets of teeth, 1 with 11. solidwork show same number of teeth. Tried with different setting in spur gear properties, same spur gear displayed

@dantepatania8257 7 жыл бұрын

Hi! i'm watching the video, and you are awesome! I'm almost finishing the hydraulic pump. But i have a problem. When I try to select the material for de pieces, all the materials show mate. Even if i choose polished iron, for example. How do i do to make them as the should? Thanks!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks for watching. you need professional graphics card in your system like Nvidia quadro series or AMD Fire Pro series. normal graphics card will not support real view in any cad softwares, you must buy a professional graphics card for real view.

@valeriu-iuliansandu-grigor6490 3 жыл бұрын

@@CADCAMTUTORIALBYMAHTABALAM or modify the register in your version of windows and add your video card chipset onto it. that worked for me on a gaming laptop that I still use.

@siddiquishoaib7929 7 жыл бұрын

you are best in solidworks.keep it up.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

thanks,

@user-kq6mt8nk2p 7 жыл бұрын

Thank you very much!!!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

thanks for watching.

@rogerrodriguez7483 7 жыл бұрын

Hi ... the tutorial is interesting, can you share the pump plane please ?. thanks you !!! best regards.

@msalamlaham7129 3 жыл бұрын

very well done thank you

@dunn-ng5878 7 жыл бұрын

what 's kind of computer or laptop did you use for compatible with Solidworks ? real view? thanks

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

i am using. workstation laptop, Dell Precision M4800 you need professional graphics card in your system like Nvidia quadro series or AMD Fire Pro series. normal graphics card will not support real view in any cad softwares,

@nenadstanojevic1321 Жыл бұрын

Za pocetnike je OK!!

@TABL3SIX 7 жыл бұрын

Could not get the motor to work for the life of me. I'm on SW 2016. Any ideas why it might not be working for me? Did it exactly like you instructed. Thanks for the great tutorial.

@TABL3SIX 7 жыл бұрын

Figured it out. Works great.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

TABL3SIX let me check again,

@pal-tech Жыл бұрын

Good

@pako_tube6898 3 жыл бұрын

Thank you very much

@gosth81 4 жыл бұрын

Hey, i would like you post a link with the plans in a PDF format like the ones you showed in the video please sir

@antojaiwin6950 7 жыл бұрын

Hi sir ur videos are very useful.Where can I get the dimensions(blue prints) which you used here.

@kiranpatel1379 6 жыл бұрын

nice video... is it available 2d drawing for our practice... please sir provide a 2D drawing us...

@johnbenson4927 4 жыл бұрын

Hey bro, the "Design Library" feature doesn´t appear on my screen. I´ve looked everywhere and I can´t find it. HEEELP

@omarshahrour9145 4 жыл бұрын

Please can you help me in drawing control valve assembly for excavator or any heavy equipment... I wish to help me

@arsi_fathur 8 жыл бұрын

AMAIZING !!!

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

Thanks for watching.

@josevieira5700 5 жыл бұрын

There are two wrong measures in the beggining of the final assembly, the last part of the project. One of them is the pin hole in the lag sleeve, it must be 1.7mm length (without adding the milimeters provided by the chaffer), not 2mm, due to the chaffer applied to the 2x4pin which will reduce its useful length, since the chaffer will enter in the hole cone. The second is in the lag sleeve itself, in the sketch, it is NOT 21,68, the measure, it's 21mm. Hope this helps boys

@jaydeepmaraviya4045 2 жыл бұрын

Thanks mate, saved the day👍

@diegosebastiansaez3110 7 жыл бұрын

Hola, muy buenos los tutoriales! Es posible conseguir los planos?. Gracias!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

i will send you link soon, Diego Sebastian Saez

@diegosebastiansaez3110 7 жыл бұрын

Thank you, you are a genius!. I am a teacher in a secundary technical school in Argentina, and this type of tutorial are very important for me and my teaching practice.. Thank you so much! i will waiting for it

@kaotic1017 6 жыл бұрын

Podrian pasarme los planos para este modelado? es para un proyecto me urge

@abeerabdel-salam3624 4 жыл бұрын

Use Warp instead of Extruded cut to get the correct symmetry

@Jaberathrt 2 жыл бұрын

مشكور جداً

@cdlopez29 7 жыл бұрын

great job!!!

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks,

@devvlogs6469 2 жыл бұрын

Sir, my spur gear is coming too big and I am unable to modify it. Plz help

@AdityaKumar-wp6kn 6 жыл бұрын

Can you make a tutorial video on Axial piston pump

@HindaviSwarajya66 5 жыл бұрын

Sir make a tutorial on centrifugal pump.......

@raniafitouri9527 7 жыл бұрын

Thank you

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

My Pleasure.

@mohamedsobhibarakat7088 6 жыл бұрын

Thanks

@pritpatel1876 2 жыл бұрын

Can you provide drawings of this part. i mean isometric and all the detail dimension.

@emind4651 2 жыл бұрын

Paper sizes are written differently, you draw differently. While the intersection of the diameter circle is 51 mm, you get 51 mm from the center of the two diameters. what is the reason?

@anupamsingha1137 2 жыл бұрын

End plate at the video time 25 min 57 sec the distance 16.68 mm, how i find it in drawing?

@akshaykapoor1965 4 жыл бұрын

sir maine 4 baar try kiya ye assembly pr ye har baar sleeve gatab honata hai bolts ke side 1 slleve gayab hojta hai upar wala esa kyo ..jab bhi me exploded view pe phocta hoo tbhi ye gayab hojata hai esa kyo sir

@muhammadhasantariq8992 5 жыл бұрын

where can I get the dimensions? I can't find any jpg file attached with the video.

@prinspatel8720 6 жыл бұрын

Ur use real pump dimensions or random dimensions?? My sir give the project on real dimensions mechanicsm. Please give me ANS.

@nature.shorts206 3 жыл бұрын

sir i can't understand how your select location in 2d in hole wizard position . please help me

@iMTOAutomatic 7 жыл бұрын

How many individual parts make up this assembly? Thanks

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

total 11 parts.

@primethoughts6425 4 жыл бұрын

Will you please send the link of this exercise?

@TrucNguyen-ut7pc 7 жыл бұрын

good job

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks bro i hope you enjoyed,

@tanhovan1517 8 жыл бұрын

can you give me all the 2d pdf drawings, i am practicing the solidworks soft ware. thanks for your nice video

@CADCAMTUTORIALBYMAHTABALAM 8 жыл бұрын

soon i will upload jpg file in my facebook page.

@bhargavkumar7762 5 жыл бұрын

@@CADCAMTUTORIALBYMAHTABALAM sir where is it I did search but not there

@vegasvegas6506 7 жыл бұрын

It would be good to put a website link to download the files to a flat or lower level, please.

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

no but jpg files attached with video.

@priyamsrivastav6385 6 жыл бұрын

Sir Please, send me the detail of design, efficiency , estimation etc of hydraulic pump..

@vijaykholia1976 4 жыл бұрын

Sir in the end when you select motor for the animation my motor is not moving

@sasa76564 7 жыл бұрын

bravo

@CADCAMTUTORIALBYMAHTABALAM 7 жыл бұрын

Thanks,

@thebrownmamba7707 6 жыл бұрын

1:17:07 why mine is not threaded the threaded is the TIP not the hole helix. I stopped here. Help sir

@jdmather5755 7 жыл бұрын

1:12:11 and 1:13:09 A hex is given by it's wrench size - the distance across flats, not across points. It would be impossible to hold manufacturing tolerance across points and is meaningless in reference to wrench tool size.

@thebrownmamba7707 6 жыл бұрын

damn this guys is genius