@FoongLeongSoon 7 жыл бұрын
For Phase 2, tick "Keep Surface" under "Fillet Options" when redoing the fillet for the 84mm boss, that should keep the fillet inline with the specs
@javierhernandezberas9513 4 жыл бұрын
This is the correct answer, thanks! (3 years after)
@tarasvinpan7699 4 жыл бұрын
@@javierhernandezberas9513 hi! im sorry but i dont quite understand what you mean. did you select, in phase 2, the 84mm boss fillet, as well as the outer edge of the rounded triangle, and then "enabled surface"? because i tried that, but solidworks refused to do it for me. i was wondering which specific fillets or in which order you did it. thanks!
@lucam8977 6 ай бұрын
Perfect, thank you very much!
@mpam002 Ай бұрын
thanks very interesting detail
9 жыл бұрын
The Fillet2 in the second part is actually wrong. In the video, it rises up as it narrows down, but in the drawing, the narrowing parts remain horizontal. The fillet feature should be moved before the Boss-Extrude2 to get the correct result.
@wrodriguezs 9 жыл бұрын
And they didn't fix the link to the earlier post.... So, Who will know???
@tarasvinpan7699 4 жыл бұрын
thank you!!!! i was wondering why the video was incorrect and i didnt know how to solve it. thanks for illustrating where to shift the fillets to get the correct one in the drawing
@KamSmiff 6 жыл бұрын
When you resized the boss to 84mm in Phase 2, it created new vertices on the underside where the shell of the thru holes are now touching the shell of the boss. These vertices should have received filets, but did not. (bottom right hand corner of Phase 2 drawing)
@enrriquepetinari9403 2 жыл бұрын
Excelente! Que bueno sería si en el futuro este contenido estubiera disponible también en español. Muchas gracias
@mpam002 3 ай бұрын
great job , shell feature is so powerfull tool if you master it
@RizonRZN 5 жыл бұрын
Phase 2 fillet is wrong!
@wrodriguezs 9 жыл бұрын
For the Boss-extrude2 I used From: Offset 35 mm and then Up tu Body. It's better way to KEEP the dimensions specified
@DesainCAD 4 жыл бұрын
this channel is great to learn faster design
@solidworks 4 жыл бұрын
Hi DesainCAD! We're pleased to hear that you're enjoying our SOLIDWORKS KZfaq channel! 📺 😊
@nickhadjigogos7029 2 жыл бұрын
Has anyone calculated the mass of the phase 1 part? My result is 547.67 grams.
@daniellambert1965 2 жыл бұрын
I got the same result.
@trinidadorac4252 9 жыл бұрын
Easy steps. Thank you!!!
@halilibrahimguven6072 4 жыл бұрын
How to set dimension arrow mark as shown on your video? its simple and easy to understand. Mine is long arrow to the pointed circle.
@halilibrahimguven6072 4 жыл бұрын
çap ölçülendirmesi yaparken çapı tek okla nasıl gösteriyor? belge özelliklerinden baktım bulamadım o ayarı
@user-vo7qu3gm3x 4 жыл бұрын
What is the part name?
@guptabharat909 9 жыл бұрын
How to make object to shine as chrome??
@solidworks 9 жыл бұрын
Bharat Gupta For tutorials, you can check out MySolidWorks. It's also a good resource for learning from your fellow users in the forums. my.solidworks.com/
@blackrose3123 8 жыл бұрын
hi, I want to buy it, but I can't find my country. Lebanon
@solidworks 8 жыл бұрын
+sandra g We don't have any Resellers located in your country, but if you check the directory under Lebanon, you'll see there are several in your wider geographic region. Any of them should be able to assist you with purchasing the software (which could then be shipped to you, or you could download it directly from the Customer Portal online). www.solidworks.com/sw/purchase/varlocator.htm
@MarcinCich 9 жыл бұрын
Great tutorial. Thanks!
@ryu-na 3 жыл бұрын
I tried it use Creo Parametric. and found your mistake. See Phase 2 fillet R3! kzfaq.info/get/bejne/oMlxfqyIuai9fok.html kzfaq.info/get/bejne/rbmImNeSz7_Zc5s.html