Various types of CAMs and Followers motion animation in Solidworks

Рет қаралды 250,023

Solidworks Fun

7 жыл бұрын

CAMS and Followers Animations in Solidworks

Пікірлер: 73

@1.618_Murphy 3 жыл бұрын

1:54 Woh woh woh woh woh woh woh woh woh! 👐✋🤚 Are we gonna ignore the *Coefficient of Friction?* It's not possible, but plausible! Thanks!

@SolidworksFunPraveenSingh 3 жыл бұрын

Friction can never be ignored. But, this is just a simple model animation.

@EvonixTheGreatest 3 жыл бұрын

A roller on the tip of the rod could help

@DersNoNem 3 жыл бұрын

The gear teeth is not that tall in life uses. But I forgot what type of machine uses star shaped cam.

@eliotlong5184 3 жыл бұрын

If the teeth were not as tall it would work better , but if the spring is weak enough I think it would be enough. I was surprised how steep an angle a drive can be at and still make a piston go up and down. It's kinda hard to tell if it would work since it's so small and fast, but I think it would generally work.

@vineetbadekar1112 3 жыл бұрын

@@EvonixTheGreatest nice idea🔥

@DanAbbott-SMCC 4 жыл бұрын

Thanks so much for posting this. I am using it in my mechanical design class at the beginning of the Cam design unit.

@SolidworksFunPraveenSingh 4 жыл бұрын

thank you so much sir! Became Very Glad to know that it is being used in a mechanical design class 😊

@cybbiggu 3 жыл бұрын

Thank you I learned a lot about the types of cams and the principles of various movements ^^

@SolidworksFunPraveenSingh 3 жыл бұрын

Glad it was helpful!

@fifaham 3 жыл бұрын

Nice video - what worries me the most is friction because friction may alter the performance of the outcome over time - unless we provide some mechanism of removing friction then it is great. I designed a system back in the 2006 and the lifetime of everything in the system was a little longer than that of the CAM, although we used grease but still adding mini rollers will enhance friction.

@ground-beef 6 жыл бұрын

This really helped! Thanks!

@SolidworksFunPraveenSingh 6 жыл бұрын

Thank you! for watching.

@claymore5347 3 жыл бұрын

Idk why, but I always find these types of videos so fascinating. I suppose chimp brain just likes the metal spin. Great video!

@AB-xu5yf 5 жыл бұрын

Awesome thanks man!

@desertratconnieconstance8557 3 жыл бұрын

TankQ, excellent stuff everytime I see one of these link's.

@SolidworksFunPraveenSingh 3 жыл бұрын

thanks a lot

@Mechanical20hz 6 жыл бұрын

Nice love it...............

@AnkitKumar1309 5 жыл бұрын

very helpful video for understanding .... thank you

@SolidworksFunPraveenSingh 5 жыл бұрын

Thanks Ankit

@shriramnarkhede6853 6 жыл бұрын

very helpful video

@user-ellievator 3 жыл бұрын

This is the greatest video ever created by humans.

@SolidworksFunPraveenSingh 3 жыл бұрын

thank you so much 🙏🙏

@Artines999 3 жыл бұрын

♥.♥ Helpful as always, Thanks...

@SolidworksFunPraveenSingh 3 жыл бұрын

Glad to hear that!

@Mtmonaghan 3 жыл бұрын

There are various cam followers that are restricted to move in a vertical direction. But the loads on these followers at some points in the cycle would be small in the direction of motion but huge in a direction direction greater than 70 dregs from the vertical. The follower would bend and the mechanism would fail. You should show a graphic of the vertical and horizontal components of the load on the followers, this data would be crucial to the design of bearings, choice of materials etc....

@Faysalariss Жыл бұрын

yeah, like in the spiral cam that would just catch the edge of the tooth of the gear it wouldn't go up and especially not that smoothly.

@Sonu_kumar840 6 жыл бұрын

Very helpful

@dfunde7085 5 жыл бұрын

Very good

@keshavrathore5228 4 жыл бұрын

best video ever

@SolidworksFunPraveenSingh 4 жыл бұрын

thank you so much

@siddheshnerurkar1167 2 жыл бұрын

Hey, Can you tell me how do you make the components appear "polished" right in the viewport, Not taking about the photoview window. Even if in apply "Polished steel" as appearance it doesn't help

@Rorschach_ind 3 жыл бұрын

Really helpful video

@SolidworksFunPraveenSingh 3 жыл бұрын

Glad to hear that, thanks.

@engrwajidkhan9603 3 жыл бұрын

Amazing

@SolidworksFunPraveenSingh 3 жыл бұрын

Thanks

@nasimahmad5880 3 жыл бұрын

Really useful 👍

@SolidworksFunPraveenSingh 3 жыл бұрын

Glad to hear that, thanks.

@tirathsingh8736 5 жыл бұрын

thanks sir

@veereshkambar6306 3 жыл бұрын

Thank u

@ayyubshaikh4134 2 жыл бұрын

thank you so much...

@SolidworksFunPraveenSingh 2 жыл бұрын

Welcome!

@kabalida3660 5 жыл бұрын

Really helpful

@SolidworksFunPraveenSingh 5 жыл бұрын

Thanks.

@vineetbadekar1112 3 жыл бұрын

Very nice 🔥

@SolidworksFunPraveenSingh 3 жыл бұрын

Thank you very much!

@djaydeved 3 жыл бұрын

the only reason to not use a roller type follower is reduced parts count for the radial cam which is comonly used in engines the valve train usally has a lot of friction on it as well as the entire engine. if you use roller rockers or followers if you have pushrods then the ammount of friction within the engine is reduced heck 2 stroke detroit disels have been using roller followers since the late 30's when the 2 stroke detroit was first made!

@RedVenomProductions 4 жыл бұрын

Luuuuubbbeeeee

@eduardsykora8622 3 жыл бұрын

sry one from base cams , face cam, missing ....

@yapandasoftware 3 жыл бұрын

how do you give elasticity to your springs? Where is the property that does this feature? thanks!

@SolidworksFunPraveenSingh 3 жыл бұрын

in Solidworks motion study when you add a Spring (using given Spring Feature) and calculate the Motion study then Spring will behave as shown above. (Make Sure Motion Symbols are not hidden)

@yapandasoftware 3 жыл бұрын

@@SolidworksFunPraveenSingh I found it. Thank you!

@bookwormbon482 2 жыл бұрын

What does CAM stand for?

@jeremyashford2145 3 жыл бұрын

2 concave cam has wear issues. Cut should be open tapered both sides.

@SolidworksFunPraveenSingh 3 жыл бұрын

yes definitely. But This is just a model created for making animation only.

@saram263 4 жыл бұрын

So cool and thanks for the comprehensive animations! Curious, how did you animate the spring moving in all of your cams? I've tried to model a spring by revolving and twisting a circular "wire" cross section, it doesn't deform though.

@SolidworksFunPraveenSingh 4 жыл бұрын

Thanks a lot. That spring deformation is possible in Solidworks animation. Currently i haven't created any tutorial for that but on KZfaq you can easily find a tutorial.

@tufayelahmedanik8402 4 жыл бұрын

What is the importance of cam?

@SolidworksFunPraveenSingh 4 жыл бұрын

To Move the Follower accordingly the Shape of CAM. CAM and Followers are extensively used in the Machine design. Example- In IC Engine, Opening & closing of Inlet/outlet Valve are done using a CAM Follower Set-up.

@chetnaprajapati9483 Жыл бұрын

How create

@SolidworksFunPraveenSingh Жыл бұрын

using motion study in solidworks software

@FlashDrive356 3 жыл бұрын

2:54 Calm down solidworks.

@SolidworksFunPraveenSingh 3 жыл бұрын

😁 right

@user-uk4mb4yj8s Жыл бұрын

Очень БОЛЬШОЕ СПАСИБО Интересно. Можно сделать придумал катушка для нарыблку,Номер 1,2,3,4.я тебе награды 🌟🌟🌟🌟🌟💯👍👌🙏🤝🥇

@pauls5745 3 жыл бұрын

#7 and 8 are both radial cams, #8 only having 1 lobe decent animation, but definitely hated the music

@RedVenomProductions 6 жыл бұрын

Looks like to much wear would occur

@SolidworksFunPraveenSingh 6 жыл бұрын

Actually the objective was to show the basic working of CAMs and Followers. Original Design will definitely require some improvements.

@RedVenomProductions 6 жыл бұрын

understood

@ANIKETSONAWANE 4 жыл бұрын

tHE VARIATION WITH GEAR AS A CAM WILL NOT WORK IN REAL LIFE

@SolidworksFunPraveenSingh 4 жыл бұрын

it's an animation only. But if the width of Gear Tooth increases then possibly it can work in real life also.

@dogwalker666 3 жыл бұрын

@@SolidworksFunPraveenSingh the angle of the teeth in the animation would snap the follower arm however if you put on a more gentle angle and lots of oil it would work.

@shriramnarkhede6853 6 жыл бұрын

very helpful video