SOLIDWORKS Sheet Metal for beginner

No video

SOLIDWORKS Sheet Metal for beginner | Episode 2

Рет қаралды 11,530

SolidWorks With Aryan Fallahi

Күн бұрын

Пікірлер: 93

@with-Aryan 9 күн бұрын

Start with SolidWorks Free (Limited seats) ▶ courses.solidworkstutorials.net/sa-registration

@raphaelmendoza6683 8 ай бұрын

Please continue the sheet metal tutorials! It’d be nice to learn the other methods! Thank you for taking a time off of your day to do these tutorials!

@with-Aryan 7 ай бұрын

Sure, thank you for the valuable feedback.

@dilipkumart9876 8 ай бұрын

want more videos on sheet metal

@with-Aryan 8 ай бұрын

Noted, thank you

@javierdelgado8694 8 ай бұрын

I want more! Thanks for this content

@with-Aryan 8 ай бұрын

You got it!

@Beazelundefined 8 ай бұрын

Good that you have mentioned cut list parameters. I was struggling with manually using Evaluate function before I found them cut list parameters were always there. I was doing lot of calculations as part of my kinda-free time at work so I found it myself and made a usefull BoM template, where it shows all cut list items parameters at one drawing. So I just throw all DXFs into one sketch, extrude, convert them into SM all and that's it - I have full table with all values. Its just very helpful, when you estimate the price of the product you make or when someone asks you of those parameters.

@with-Aryan 8 ай бұрын

Glad to hear that

@Vincent57221 Ай бұрын

I'm grateful for your tutorials. I've learnt a lot from this episode.

@with-Aryan Ай бұрын

You're very welcome!

@rggot2relax 2 ай бұрын

More is better. Love the way you explain things.

@with-Aryan 2 ай бұрын

Thanks for watching

@KremlinSS 8 ай бұрын

hope you continue this series it helped me alot in my current job

@with-Aryan 8 ай бұрын

Glad to hear that . Will do

@KOZANOSTRAxd 8 ай бұрын

More sheet metal thanks :D

@with-Aryan 8 ай бұрын

Noted, thanks

@slightwave 25 күн бұрын

Any of your videos are of great value to me, Thank you so much.

@with-Aryan 24 күн бұрын

You're very welcome!

@foronb746 2 ай бұрын

please more, thanks

@audaxrallymedia 8 ай бұрын

Some Adds : For Bolt connection you need to add wider hole for one side because bend guy can't bent an ideal line and your holes will not be coincidence. And second one - Convert to sheet - is better method because takes less computer time to generate.

@with-Aryan 8 ай бұрын

Thanks for sharing! Good point

@josh4058 5 ай бұрын

These are awesome, very helpful!

@shadyshed2005 8 ай бұрын

This was very helpful! More sheet metal videos please. If you could also make one about working with the mesh modelling tools in SolidWorks.

@with-Aryan 6 ай бұрын

noted, thanks for watching

@nathanparkin4182 5 ай бұрын

Good video, but the only things on a sheet metal drawing for the 'formers' should be the overall sizes and where the bends are, plus a view showing what the end result will be. you should then have another drawing showing what the end result is that the 'formers' do not need to see as they do not need too. The reason for two drawings is because not everybody needs the same information and is wasted and you can have much cleaner easier to read drawings. Also you should never write notes that give crucial information that could change if the part happened to change, for example the bounding box, the dimensions can always be added.

@neatmachine 7 ай бұрын

So excellent! Thanks! I would advocate delving into sheet metal more as well. As a suggestion, how about discussing Display States? What they are and how to use? I have been using Solidworks since 1999 and taken courses but none discussed this topic area. This might be a bit of a niche topic, but it might be covered in conjunction with other topics as an aside. If you have already covered this elsewhere, could you please let me know the link to find it? Thanks again!

@with-Aryan 6 ай бұрын

working on it! thansk for the tip.

@aeywyn5230 8 ай бұрын

Someone who has done an absolute shit ton of sheetmetal components we never dimension the flatpattern apart from bendlines and up and down but as a reference dimension since the actual sideview if the bend is more important and the outcome of the flange. And as a tip, whenever there is an angled bendline add some flatspots on either side either as break off tabs or indents in the part. Otherwise it will never come out correct unless it is fixed tooling which sort of defeats the cheap aspect of normal sheetmetal :)

@with-Aryan 8 ай бұрын

Thanks for sharing that!

@shankarmallaSBM 3 ай бұрын

More sheet metal videos please

@with-Aryan 3 ай бұрын

alright thanks for the feedback

@catalinalb1722 8 ай бұрын

Great content, thank you! I did learn something! ☺️ 🙂

@with-Aryan 8 ай бұрын

Glad to hear that. Thank you for watching

@raghadmaraqa2759 6 ай бұрын

I want more please of sheet metal content. You are AMAZING!!

@with-Aryan 6 ай бұрын

Noted, thank you for your feedback

@raghadmaraqa2759 6 ай бұрын

@@with-Aryan I have emailed you that I need access for the solidworks course pro for the student plan and I am still waiting for the response. Can you please help me?

@SlightMalfunction 8 ай бұрын

Great stuff! I'd like to see more.

@with-Aryan 7 ай бұрын

Sure, thank you for the valuable feedback.

@mouhammadbocoum1393 8 ай бұрын

We've been waiting ! Thanks

@with-Aryan 8 ай бұрын

Thank you for watching!

@rooey4193 8 ай бұрын

Definitely want more of this topic

@with-Aryan 7 ай бұрын

Sure, thank you for the valuable feedback.

@WeimerResearch 4 ай бұрын

Is there a way to make holes at an angle in sheet metal for SW? Wanting to have a cylindrical hole and show the machinist that there need to be holes drilled in AFTER cutting, rolling and welding the sheet into a cylinder.

@with-Aryan 3 ай бұрын

yes! use a simple extrude cut

@limjunyi2211 8 ай бұрын

Great video!!! Learn a lot from u Aryan!

@with-Aryan 8 ай бұрын

Thanks for watching!

@En.Shabanzadeh 7 ай бұрын

خیلی خوب بود ممنونم

@with-Aryan 6 ай бұрын

khesh mikonam

@AnasKhan-yc3ur 8 ай бұрын

I want more of these videos

@with-Aryan 6 ай бұрын

Sheet metal? come on to my course courses.solidworkstutorials.net/webinar-registration?sl=sheetmetal

@cosminciobanu5767 8 ай бұрын

Smashing content

@with-Aryan 7 ай бұрын

Thank you for the complement.

@user-ox7je7tc7q 8 ай бұрын

Make a series on static simulations as well

@with-Aryan 6 ай бұрын

Maybe later, but noted

@ridwanhusainishraq 8 ай бұрын

Sir Would you be kind enough to provide a tutorial on how to design a battle tank? Leopard 2?

@with-Aryan 7 ай бұрын

Good day, If there is enough demand I will make it, but again due to copyright issues it cannot be an exact match.

@cau0306 8 ай бұрын

😮 ur now my teacher..

@with-Aryan 7 ай бұрын

Thank you for the compliment.

@ZeeshanKhan-dv6tm 8 ай бұрын

we need more contents of solidworks..👍

@with-Aryan 8 ай бұрын

Noted thanks

@efraimmurillo5411 6 ай бұрын

i want more of this topic

@user-ox7je7tc7q 8 ай бұрын

Superb

@with-Aryan 6 ай бұрын

thanks for watching,

@zaky3592 8 ай бұрын

More sheet metal pls

@with-Aryan 6 ай бұрын

noted, thanks for watching

@TAUFIKCADTUTOR 8 ай бұрын

hello brother, what do you think? 1. press machine first, or 2. Product first which is produced. Sometimes when we make precise and complicated sheet metal designs, it turns out that the gauge and V block don't match ,lol

@with-Aryan 8 ай бұрын

A lot of ambiguity in that query; Are you asking for what process to do first when manufacturing a complicated sheet metal part? This would require part specifics to answer that question because every part is different Now for the tooling. If the gauge or sheet thickness doesn’t match the die of course it will bend incorrectly. I suggest using a laser engraving tool and make sure all tooling is labeled so no one can get it wrong

@TAUFIKCADTUTOR 8 ай бұрын

@@with-Aryan yes, that's what I mean. Because in my country the cost of processing with a laser machine is still very expensive, and thank you for the good answers, I really appreciate it,

@mako7796 8 ай бұрын

God bless you

@with-Aryan 6 ай бұрын

Thanks a lot

@caslavristic190 8 ай бұрын

more, more and more

@with-Aryan 6 ай бұрын

noted, thanks for watching

@abdallahmsaddi4242 6 ай бұрын

i want more

@matinkargari8068 8 ай бұрын

Hello sir, Do we need to buy a license for freelancing to work with some sites like fiverr or upwork ?

@with-Aryan 7 ай бұрын

Yes, the student version does not allow freelance monetary gain, thus you will have to get a regular license to SOLIDWORKS.

@birbibekpandey2150 8 ай бұрын

Hey can you suggest assembly resources to practice

@with-Aryan 7 ай бұрын

Which topic are you trying to practice? speed or mates? and what level of difficulty? CSWA or CSWP?

@birbibekpandey2150 7 ай бұрын

@@with-Aryan I need much more practice sheets for assembly speed because I m much more families with mates

@majidasadolahi1118 8 ай бұрын

very good Aryan

@with-Aryan 6 ай бұрын

Thanks man

@laliths6163 7 ай бұрын

Bro please show me how to learn NX cad

@with-Aryan 6 ай бұрын

I don't work with NX bro

@marinoduka5013 8 ай бұрын

More sheet metal

@with-Aryan 6 ай бұрын

noted, thanks for watching

@jpytvid 8 ай бұрын

More sheet and weldments

@with-Aryan 6 ай бұрын

oki doki

@anggilesmana2180 Ай бұрын

I want more aryan

@yertzar775 8 ай бұрын

Am i the first?

@with-Aryan 8 ай бұрын

you are! any questions?

@yertzar775 8 ай бұрын

@@with-Aryan Actually liked this video. I'm not really into machining by itself since I'm studying physical engineering. However, CAD is getting into our course aswell to help us idealize experimental setups and stuff, therefore I'm learning. Great video, already watched it and saved it to rewatch later again

@fromtheroad3081 8 ай бұрын

Kind of knowing how to click buttons in the sheet metal workbench and make things happen in the graphics area. This should be the title of this video. Either do your research on how this stuff works in the real world or don't post it it at all. This is just a bunch of hot garbage man.

@with-Aryan 6 ай бұрын

definately not for everyone! thanks for giving it a shot