Solomon Short Stroke Trigger Kit for Ruger LC9 and LC380 Installation by Galloway Precision

Рет қаралды 16,798

Күн бұрын

In this video we go over the installation of the Solomon Short Stroke Trigger Kit for the LC9 and LC380 Pistols.
Timeline
Overview starts at 0:05.
Tools required at 0:48.
Installation Instructions at 2:04.
Trigger Adjustment at 18:39.
Be sure to follow us on social media to stay up to date on all things Galloway Precision!
Firearms Friendly:
firearmsfriendly.com/profile/...
Facebook:
/ gallowayprecision
Instagram:
/ gallowayprecision
Vimeo:
vimeo.com/gallowayprecision

Пікірлер: 28

@artlessdiamondmedia Жыл бұрын

Thank you very much for this. I use lc9 for my edc and this helps me not want to sell it even more

@GallowayPrecision Жыл бұрын

Thank you for the feedback. Glad to hear you like the improvement.

@petermonck5448 2 жыл бұрын

Excellent tutorial 👍😎

@GallowayPrecision 2 жыл бұрын

Thanks, glad you found it helpful.

@fargone--2945 2 жыл бұрын

I noticed after installing your kit that the ruger original blocker, lifter springs are different than the springs you provided. One of the ruger original springs are slightly cone shaped and has one less coil. I don't know if it's the blocker or lifter because I only noticed after install. Your springs are both identical in size and match the original that is not cone shaped. Is there a different and is it going to be a problem? Please reply to my ebay messages.

@RickSanchezC--ge6fw 2 жыл бұрын

Well I removed that metal pin before told not too. Any help would be appreciated

@RidinDirtyOutdoors 2 жыл бұрын

💪🏼

@chazitup13 Жыл бұрын

I could not notice any benefit with the trigger pull show here. The pull is still too long, as it is original? Perhaps it is not as much resistance but still the trigger moves almost to the end of the guard as it does without any changes. Simply, I hate the long trigger pull and reset, it is terrible. I sent my LCP back to ruger for trigger work and it is still not smooth and pull/reset is to long. Just my two cents worth. Appreciate the video.

@closer71 Жыл бұрын

Strange...might have something else wrong then. My LC9's trigger breaks about 20% sooner than it did when stock, after installing this kit (although, I did so in like, early 2021 so maybe the kit has changed?)

@OneCupOfCoffee204 Жыл бұрын

Hi, first-time viewer here. I'm in a bind and need help reinstalling the hammer catch spring on a Ruger LC9 I shouldn't have removed it I know but I can't figure out how to get it back in. It seems the only way to get it back in loads the spring so much that the spring pulls out of the catch. Can you shed some light on this, please?

@GallowayPrecision Жыл бұрын

If you contact our tech through our website, he'll be able to assist you with this.

@DX91001 2 жыл бұрын

I cant find this kit anywhere! Such a bummer. I bought the spring kit with no trigger. I wasn't too impressed with the results. Does anybody know where I can get this kit?

@GallowayPrecision Жыл бұрын

Thanks for the feedback. Glad your pleased with the results and the video was of help.

@usernamemykel Жыл бұрын

Would this kit work for a n LCP .380 gen.1, xxx-xxxxx? Thank you.

@GallowayPrecision Жыл бұрын

No, this is just for the LC9 and LC380. We do make the Peacemaker Trigger for the LCP Gen 1.

@solomonmitchell5966 Жыл бұрын

The pin you said not to take out I took it out how do I put it back in

@GallowayPrecision Жыл бұрын

Please contact our tech through the Galloway Precision website for instructions. You can use the "Contact Us" form.

@PokeSleepDeals Жыл бұрын

Is this the newest / best option for my Lc380 ?

@GallowayPrecision Жыл бұрын

Yes sir.

@E62121 2 жыл бұрын

Is there anything else I can add to this kit to reduce the length of pull?

@GallowayPrecision 2 жыл бұрын

We do offer some in house work on cutting the factory hammer. This currently runs $30.00 (including return shipping) and would require you to ship us your factory hammer. This modification and our trigger would shorten the stroke by 35%. If you have interest in this, please contact lynette@gallowayprecision.com to schedule the service.

@E62121 2 жыл бұрын

Thanks, I sure will do that.

@E62121 2 жыл бұрын

Getting the hammer cut along with the kit made a world of difference! Thanks, I highly recommend this kit and having the hammer work.

@TADDs101 Жыл бұрын

@@E62121 did you install the trigger kit yourself or have them do it?

@danielreasor6487 Жыл бұрын

How do I order a short stroke bar for my Ruger lc9

@danielreasor6487 Жыл бұрын

Short stroke kit

@GallowayPrecision Жыл бұрын

Please go to the Galloway Precision website to order the kit. It is on the Triggers and Trigger Kits page and the LC9 and LC380 page. Sorry I can't add a link to the website due to KZfaq's policy on firearms.