No video

SOLVED! 2000 NISSAN FRONTIER V6 2WD STARTER REPLACEMENT

  Рет қаралды 7,182

Mobile Auto Repairs

Mobile Auto Repairs

Күн бұрын

Parts: Starter Motor
Tools:
Jack & Jack Stand
safety glasses
14mm socket/wrench
12mm socket/wrench
10mm socket/wrench

Пікірлер: 10
@angelagredano1094
@angelagredano1094 6 ай бұрын
thanks.... its easy to you
@mobileautorepairs2169
@mobileautorepairs2169 2 ай бұрын
Appreciate your support 🙏 Easy you say... I've been busting knuckles for 36 years doing this work After a few thousand, it's still work, just remember it's all nuts and bolts that hold a vehicle together Ifnit went together , it can come apart Try not to think of the whole repair, just one bolt. 1 step at a time I'm sure you're amazing at what your proficient at, before you can achieve, you must believe! You can do it!!!
@steveguida2639
@steveguida2639 Жыл бұрын
Thanks pal, kudos for having the patience to hold a camera while doing that, looks easier than I was imagining but good ol Japanese engineering rarely disappoints. Thanks again bro hope yours is running well
@mobileautorepairs2169
@mobileautorepairs2169 2 ай бұрын
Appreciate your support 🙏 The engineers make these east to come apart and put back together, if you don't fuk around you'll never find out! 🎉 Thanks for watching 👀
@edwardbrooks2674
@edwardbrooks2674 9 ай бұрын
great job
@alonsogomez7174
@alonsogomez7174 7 ай бұрын
🍀☘️⭐🌟👍
@adambeckham8552
@adambeckham8552 4 ай бұрын
How did you know the starter was bad mine would turn on but wouldn't crank
@mobileautorepairs2169
@mobileautorepairs2169 2 ай бұрын
Process of elimination my friend... Always start with a K.I.S.S. 1.Check fuses & relays 2.put key in ignition & turn to crank then back off quickly, do this about 5-10 times, eventually maybe, it will start Most time this tells you possible solenoid failing/failure, if this doesn't work.. 3.Good ole hammer tap to BODY of starter, middle 💪 strength,not too hard, not to soft, just to put a hole in your starter If that still doesn't do it 4. Pull it down and out, shake it, if it's making a rattling noise it's most likely done it's job and it's time for replacement 5. Once out, verify at local parts house for testing Hope that helps! Thanks for watching appreciate the question
@superartist271
@superartist271 5 ай бұрын
Omg the freakin lead wire connector 😡🤬
@mobileautorepairs2169
@mobileautorepairs2169 2 ай бұрын
Appreciate the comment, yeah they're fun, just remember if you don't fuk around you'll never find out 🎉
2006 Nissan Frontier Starter Replacement
13:45
Lehew
Рет қаралды 39 М.
PEDRO PEDRO INSIDEOUT
00:10
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 8 МЛН
小丑把天使丢游泳池里#short #angel #clown
00:15
Super Beauty team
Рет қаралды 46 МЛН
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 40 МЛН
NISSAN FRONTIER 2000 NO ENCIENDE NO HAY CHISPA
15:14
Victor Martinez
Рет қаралды 107 М.
How To:  Replace Starter on 00-04 Nissan Xterra  3.3L 4WD (VG33E)
9:08
Xterra Rob's Garage
Рет қаралды 57 М.
Failure on Ignition switch
8:05
D21 Pickup
Рет қаралды 77 М.
NISSAN FRONTIER PROBLEMAS DE MARCHA
15:57
Victor Martinez
Рет қаралды 201 М.
2001 Nissan Xterra 3.3 L V6 Starter Replacement Made Easy
11:30
Sell Those Flipping Cars
Рет қаралды 14 М.
2000 Nissan Frontier 4x4 starter removal
6:08
THE MOBILE CAR DR.
Рет қаралды 1,3 М.
2000 Nissan Frontier Timing Belt Replacement - VG33 - 3.3L V6
19:51