God bless you, sir! I've spent the last three days searching the internet for exactly what you just showed me in less than 5 minutes! Direct and to the point, just the way I like to be taught. Wish I could give you a big ol' kiss on the cheek!

Thank you good sir! I have a pfaff 50 with a tension problem, your video was of the utmost help. For anyone with a pfaff 50 the round pointed washer points toward the machine.

For the longest time, I thought that I had lost some parts of my upper tension assembly of my Singer machine, until I watched your video this morning - and you have the same exact parts as I do in my machine. Thank you so very much for your video.

I was given a Singer 66-18 Crinkle finish machine today. This video was a huge help in getting the tensioner adjusted. I want to restore it to its glory! According to the booklet, it’s a October 25, 1946 model. With 15,000 allotted for production.

Thank you so much! That very first thing you did is what I needed! The entire tensioner stud was morning like you showed. Perfect.

Doing this along with my husband, fixed our issue first time! We haven’t been able to use this machine since we got it 5 years ago! Thank you so much!

Thank you so much for your video! I have a Singer 206k given to me by my husband’s grandmother. It took me two tries taking apart and putting that tension knob together again and adjusting it, but it works now! This machine has been a sentimental decoration for years while I used my Janome machines. I’ve taken an interest in learning quilt piecing at age 65, and I decided it would be more meaningful to use Grandmother’s machine for the quilt piecing and mine for the final quilting. I can’t begin to tell you how relieved I was on the second try with taking that tension knob apart and putting it together again! You’re a great help and teacher! Thank you!❤️❤️❤️🧵 .,

This was so helpful, I was having tension issues and no matter what nothing would stitch right. After watching this video it helped me so much and now my stitch is spot on 😃

This was BRILLIANT! This helped me address that ornery back spring without shooting it across the room! Thank you, Ray!

Thank you so much! I just did my very first repair with your guidance. I have a gorgeous 185J and now it will work.

Today I spent 4 hrs trying to get the stitching tensioned on my Singer treadle,... It got just the same " thing" . I took it appart and fiddled with it, , and then put it together again, ... That little ring with the tooth on it was left over, reassembled the whole thing and it looked wonky,...still didnt work properly,... I walked away before destroying it completely... Thanks to your great tutorial, I will succeed tomorrow!....👏

Thank you so much. I just inherited a 1946 Singer 66-16 from my mom, passed down to her from her mother. It works better than my Singer One, but I was having tension issues. This fixed it and it was easy to follow your steps!

Thank you so much! I’ve using my grandmother’s old machine for the first time and was losing my head because of the tensioner until I watched this video!!

Just what I needed to help sort out my top tension on a new Japanese clone machine that I just acquired, thank you so much!

Fantastic video! When I disassembled the tensioner I found that the split screw "doohickey" (that all the other peices rest on) was bent! 30 seconds with some needlenose pliers and it's fixed! Thank you!

Learn something new everyday. You have demystified the tension dial for me. Thanks

I know it's a older video but this helped me with my good housekeeper!! Thank you!!

O thanks sooo much,,, because of this video i helped my mum to fix the issue of her singer.. without video it was mission impossible... so sweet of you from Lebanon!

Thank you so much!! I was trying to fix my mum's machine and this video was of great help.

THANK YOU SOOOOOOOOOOOO MUCH! DID IT, you are an excellent instructer. I could not afford repair and well, I did it! thanks to you.

This channel is very important. I am trying to fix my very old singer ordinary sewing machine. Thank you for this vlog. New subscriber from Philippines

Thank you so much! I never knew that the spring in the thread tension could get so rusty

This also helped me set up my tensioner on my 99 thanks heaps 😊

Fantastic! I didn’t know you could just push the number wheel in to adjust the positions re the spring! You just saved me a lot of angst!

Ah, now I know what is wrong, the back of my spring the tiny clip is broke off. Time to order a new one. Thank you so much for the video !

Thank you now i know what the problem and what the importants parts i have lost....thank you very helpful...

Very useful, clear advice. Thank you

Genius - yes! Helped massively - thankyou!!!

Omg! Thank you, sir!! You solved my headache - how to put back tension thing (I accidentally took it off 😬). And you happened to have exactly the same model as mine and made amazing video!!! Omg! Thank you sir again!!! Love from London, Sanita

This video worked like a charm. Thank you!

Thank you mate, thank you. No problem now.

THANK YOU ,thank you ,thank you ! Now I can solve a long standing problem !

Great video, very helpful thank you!

Great, Thank you Ray

Best Video and explanation. Thanks

Excellent, thank you.

Thank you. You are the best!

Gracias por compartir tutorial / información. Dios le colme de bendiciones.

Thank you so very much!!!!

Thank you so much sir

Hey we have an issue as this screw that you put things on is broken, do you know how to detache it?

Máquina de costura muito bonita parabéns

Thank you very much ❤️🔥

Will try it

Helped me reset my tension, many thanks.

Helpful!!! Thanks!

thanks a lot

Thank you.

Please what should I do when my thread lever stuck.

Thank you 😍

Great thanks!

Working my 1920 singer treadle I have a different spring and for the life of me an extra disc any ideas

thank you

You haven't mentioned the pin inside the shaft. I don't see mine move when I lift/lower the presser foot. Shouldn't it?

Hii I have one don't in tension disc thread is not staying it came outside while stitching machine not rotate it

Thanks

I followed your instructions to the letter. Getting the tension assembly back on correctly is not my problem though. No matter how I turn the dial my tension just won't work right and I am about to chuck this machine in the bin.

i tried what you are doing but can't figure what i did wrong now my machine is giving me a headache. but i will try again

tqs for vedio

Thank you much😍

My 306 W has a 3rd flat disc which appears to not belong to the tensioner. Am I correct in this assumption?

I own a Singer 201K, when I sew straight, the tension is ok but when I am on the reverse, the upper tension is loose so the thread comes out like dots, what can go wrong?

I have problem with my machine,i cant use,because of tension

Cool

Did you put the bee hive spring in upside down?

Is the sitting different for a 66-1?

Why is thread in my sewing machine not sewing in my fabric... I need your help please

Koi h jo seena mashin ke bare me bata sakata h

i have a machine like this one

Para

I hate my sSinger 201. There's really nothing mechanically wrong with it but whenever I go to use it, it acts up or behaves finiky. Overrated machine. "Rolls Royce of sewing machines" - m'eh.

Thanks

Thanks