That's pretty awesome never would have thought about some cardboard for polishing stainless. I Will pass this knowledge on

This video intro is like watching OJ Simpson try on a glove.

Is nobody else going to admire the straightness of that hand drawn line at 1:00

This looks like one of those late night commercials selling a product. "Do you have massive problems with an every day task no one else has issues with"... "sure you do... BUY THIS!"

Ah the universal language of point & tap!

Scotch brite pad red or gray depending on what finish you want. Fold it in half x it out to find center. Punch hole in center with screwdriver. Put on angle grinder... Preferably one with speed control set it to low. Lol polishes things nice and fits in pretty much every corner when a fresh pad. I use to weld stainles in food and beverage plants.

this was about 5 minutes longer than it needed to be.

First 2 minutes of this is like me when I'm trying to just look like I'm working without working 😂

That was the straightest freehand line I've ever seen

Putting this together like everyone is an idiot. Lmao. Thanks for the vote of confidence. Takes 15 secs each spot to show it won't fit in every spot it won't fit.

Thank you for making this video, that was awesome👍🏻🇺🇸

I just wanted to know what material he was using...was it leather or carboard, fine grit sand paper and jewelers paste,

As a polish person i can confirm that this is how we weld

Everyone talking about polishing in small gaps, like Polish it before... I can understand the corner but the thin gap, just do it first.

Your demonstration of how it won't fit was a flawless proforma CE...

I think you can use cut out jeans or leather for that, maybe layer it with the cardboard and glue it together to get the shape and stiffness but have the leather or jeans larger than the cupboard. That is an interesting make shift though. I would've just thought of a bigger radius to reach inner angle, this is not only smaller which means retains its stiffness easier it's also much easier to cut because it's square.

High RPM spinning sandpaper flaps!? That's cool! We should mass produce these in a fibre backing, with a metal reinforced core, with the flaps and backing held together with some sort of resin, at a slight angle. I call it "flap disc". They could really take off Edit: It would seem before you comment, you should google what "banter" is. Lol

You know what really sucks a lot of folks out there will either never see that spot or could care less and this is actually a great idea.

По превьюхе видно: поцыэнт Доктора Дью☝

When there are extreme limitations or far from any hardware store, You don't want to spend gas and (MUCH TIME) going to the store for a polishing disk!! Looks like it can save you an hour waiting in line!! That's incredible!! I need a new pair of shoes and now a shoebox for my polishing needs.

Or take that grey wheel you had on first an take it to a bench grinder sand one side down to make a edge. Bam corner blending.

Everyone : straightest freehand line Me: used his 3rd finger as a guide "rocket science"

Those vehicles passing by that's a pure ASMR 😌😴

Sus técnicas son mágicas! Gracias por compartir su conocimiento.

This video could have been done in 30 seconds with time to spare

Fantastic. Great vídeo! 👍🏻 (Brasil ,🇧🇷)

Mohon maaf kalau boleh saya saran, memodifikasi grinda sangat bermanfaat, tapi yg berbahaya itu bagi yg belum biasa dan asal coba2. Dan berdampak berbahaya, sambil dijelaskan bang, takut orang salah persepsi dan mencoba dengan barang yg bukan Abang maksud. Karena semua org GK sama, beda tempat beda pengalaman beda jam terbang, beda pula cara mencerna nya Mudah2an tau maksud saya, mohon maaf jgn marah ya

Wih.. sukses besar nih mas dedi, sering2 bikin konten simpel berbahasa inggris aja mas. Banyak tuh yg share idenya juga, bisa gantian buat jd bahan ide bikin konten. Heheh... Goodluck

Thank you for sharing this tip!

Thank you ! Very useful,indeed!

I feel like a kid that's just been offered a lollipop to jump into the strange mans blacked out mini van after watching this guys tips on welding🤦🏽‍♂️

I'm going to try this right now in the kitchen ...

Untuk pagar stainless apa harus dipoles seluruh permukaan pagarnya atau cukup bagian yg dilas saja atau bagian yg luka saja bang? Atau apa ada cara biar stainlessnya tdk cepat kusam(warna merah)

I'm a dead tree carcus worker for fine work. But ironworker as well and we don't do much detail work. With that said. Would it not be easier to just hit a sharp edge with the original wheel and miter it? Seems faster and more effective. But as my preface I'm not a fan guy with metal other than flashing which you just paint.

Overall definitely good stuff for sure and a useful and practical tip that I hadn't previously known, but what was the point of the thin strip at the beginning? And why did you/he start to chain grinders together? Lastly, what was the green stuff...was that just a wax or polish?

That line he freestyled down that veneer was better than me with a straight edge 🤔

I’ve been a stainless steel fabricator for 27years. I’m one of the youngest in my shop of 10 workers. We are constantly buying new equipment and helping or sharing ideas with each other. This video makes absolutely no sense to me, why would a stainless steel worker use an arc welder?

Very good man Thanks for this idea

No they don’t. The black and decker grinder tells me everything I need to know!

This video reminds me of the guy carrying the wheel barrel

Cool i will have to give this a try

It's years since I last used stick welding on stainless..... MIG & TiC is all I use.

А просто иметь в запасе несколько типоразмеров полировальных кругов не судьба??? Или ближайший строймаркет за 100500 км?

Hmmm if only someone would mass produce your totally new, original invention... like you could stack layers of sandpaper together with some sort of flexible backing, the flaps of sandpaper would fit into all kinds of tight spots.....a fool can dream..

It's like a handycapped person who is very confused by a standard polishing wheel....

Thanks. What kind of polish did you use?

This is awesome!

This is this guys one tip and you better believe he’s going to milk it for all it’s worth!

I just tried that on my Harley worked amazing

Simple, free, right where you are and from what you have on hand.

Ini pake kertas apa ya om??

How nieve do you think people are? Tapping gaps constantly with different abrasive tools to show that they will not fit between small tight spaces! Very irritating to me but worth the pain to see the tip, which is awesome. Thanks

Nice idea.... 👏👏👌👌👌👌👍👍👍👍👍

3m bristle brushes work awesome if you actually want to do it correctly lmao. Dont be cheap and expect quality craftsmanship 🤷🏻‍♂️

Молодец. Отлично придумал. 👍👍👍

I'm sure all the other workers were pissed that you took 15 minutes to make a stupid flap wheel while they kept working.

I do the same, but I use a stack of 4"×4" paper towels. A little dab of water and it polish up aluminum and stainless.

Lmao new to KZfaq OJ & the Love Glove 🤣

Kertas apa yg di pakai kang,, mohon pencerahannya 🙏

Some welders keep the guard on the cutting discs too ,,, they are the ones we call professionals .

Which paper you used in squares cutting

Nothing beats experience, great video.

What paper are you using please?

Thank you for the valuable tip !!!

That’s what high speed die grinders are for with small 2.5” grinding and polishing wheels used a lot of them.

That is when I love humanity and KZfaq.

Гениально! Спасибо.

Pakai apa itu om? Amplas? Hpl?

In India strength is measured in GRINDERWEIGHTS! (Gw)

I perform a similar technique with my old growth pubic hares...I pain stakingly weave them around grinder spindle and with all the cock cheez that is infuzed in the DIY multi ply pubic polishing pad makes for a savage ass polishing micro finish compound that 3M can't even top!

What paper was that ?? Please reply. Thanks. 👍👍

My first instinct is to shit on it, where I'm from there are dozens of commercially made products that would work far better, longer and faster (and safer), but perhaps this guy doesn't live in a place with access to any of that. In that case maybe it's a good alternative, who knows?

Leather discs + buffing compound

Kertas ap nmany itu bang ?

Listen bro we get it you don't need to try and make it so clear

You do realize that the constant positioning of the angle grinder and tapping with it is not necessary for us to understand why you can't reach that part with it. We have eyes It's literally a common sense

Ну понятно, додуматься заправить круг под углом - не каждый может...

All kinds of awesome!

welding stainless steel puts off very deadly fumes. Don't weld stainless steel unless you have all of the proper safety equipment. you don't want to breathe in the smallest amount of those fumes.........

Even at 2x this video is twice as long as necessary

What sandpaper grit are you using??

What's the pickle and fibreboard called? Odd how some brains tick. Good long video 😂📸 photo opportunity for the crew . NEXT?

Sei un GENIO!!!!

Hi goodnight. Is it cardboard that you are using?

3:22 sounds like a F1 car

Wow. Nice work.

Excelente!!!!! Genial!!!!

Please tell me what kind of paper it was

It took 10 minutes to show something that could have taken 2.

Use Leather Raw, go to anyone who sells leather ie craft stores or Leather Ranch if you have one. I cut off a square of leather drill hole the same diameter size of were the lock nut is. I use thicker leather with Washers that have spikes or put a weld bead on washer to help secure the leather stops it from spinning should the lock nut come loose. you will see the amasing job it does Polishing stanless or copper ect ect take care hope this helps someone out

Ujung kain polesnya di buka/di lembutin dulu (The end of the polishing cloth is opened / softened first)

Th most inexpensive sand paper out there.

That's really cool. What kind of paper did you use? It looks like gasket paper.

Good explanation

It's called a wired brush guy....

If you use tig welding there is no need for this. Just use acid gel and a soft cloth polishing disc after. Much safer and less time consuming.

It's a good hack but they make wheels for this

Apne kon sa paper use kya h ??

Which material is it?

Don't they have stuff for dremel that would reach in the tight areas?