Someone Messed With The Banana!

Рет қаралды 640,175

Күн бұрын

So...Someone messed with the Jeep Banana!
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
Big Mistake?! The Heavy Wrecker Crashes.
• Big Mistake?! The Heav...
We Came All This Way To Be Lied To!
• We Came All This Way T...
The Heavy Wrecker Strikes Back At Rattlesnake Gulch!
• The Heavy Wrecker Stri...
A Driver's Nightmare...TomTom Loses His Brakes!
• A Driver's Nightmare.....
Huge Military Axles & A New Corvair...What Should I Build Next?
• Huge Military Axles & ...
Broken Driveshaft & 3 Hours From Civilization!
• Broken Driveshaft & 3 ...
Salvaging The Banana!
• Maybe We Should Leave ...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
10% Off the best parts for your Off Road Vehicle Barnes 4WD
www.barnes4wd.com/?ApplyPromo...
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!

Пікірлер: 1 100

@lanceleavitt7472 Жыл бұрын

On a positive note: With the 62mm throttle body, maybe you'll run out of gas *_BEFORE_* you pass the last gas station instead of after you pass the last gas station.

@MrSlappo Жыл бұрын

Most Jeep owners know that stands for Just Empty Every Pocket lol

@scottbrown888 Жыл бұрын

this guy.

@gregwright1444 Жыл бұрын

Ed with the brutal "That's welding?!".

@nasonguy Жыл бұрын

Ed’s always ready with some shade, haha.

@udaypmishra1 Жыл бұрын

Sarcastic !i see

@volvo09 Жыл бұрын

That made me laugh!

@teressarenslow5992 Жыл бұрын

I love Ed! Can't beat honesty! Lol!

@jonscarboro123 Жыл бұрын

😂😂

@61rampy65 Жыл бұрын

As an ASE certified mechanic, I can truthfully say that TomTom's description of how a throttle body works is _spot-on_ !

@TrevorDennis100 Жыл бұрын

Even his sound effects? 😉

@61rampy65 Жыл бұрын

@@TrevorDennis100 Especially his sound effects!

@KA-om9oz Жыл бұрын

As a guy who changes his own oil...I agree with the professional lube tech

@murray8958 Жыл бұрын

Lol sound effects were a little off😂

@mikethompson2137 Жыл бұрын

I heard ASE stood for “ask someone else” Jk it’s an old mechanic joke.

@COM70 Жыл бұрын

6:07 Bahaha don’t think Ed can lie, he just says it in a slightly less blunt/more polite way.😂

@josiatokirina1788 Жыл бұрын

In my youth, I stick welded the roof trusses for a very large airplane hanger. Not only did I weld each truss piece together, I also welded them up unto the roof structure. It was my first time welding and I was able to get proficient while welding the trusses on a horizontal bench. By the time I had to weld them in place up in the air from the under side, I was able to make smooth solid welds. I went through four long sleeve shirts and two pair of jeans from all the welding sparks. The only complaint the owner of the hanger had about my welding, was that I used too many welding sticks. He just wanted me to make small weld tacks. He changed his mind about how many long welds I made when a tornado hit the hanger 3 years later and the only damage was the metal screwed on roof sheeting that came off. All the trusses were intact. Thank You for sharing the newbies welding experience.

@gragor11 Жыл бұрын

I took flack for how heavy I built a little plans table shack that was installed on the roof of a grocery store we were wiring until the day the thing was hit by a bail of roof insulation from about 200 feet in a 40 mile an hour gust with us being about 15 feet away from the other edge of the roof. It bent but it didn't sheer off and take us with it. Some people are asses.

@2403rygar Жыл бұрын

Tom's description on how throttle bodies work was the best explanation I have ever seen or heard!

@justinc616 Жыл бұрын

Ed : "that's welding?" lol Been missing Ed in the vids, really great to see him popping back in again.

@lennygermany1507 Жыл бұрын

Isn,t it great when a full blown Engineer with all his abilities describes how a throttle works , RRRRRRRRRRRRRrrrrrrrrrrrrrrRRRRRRRRRRRRRRRRRRRRrrrrrrrrrrrrrrrrrrrrrrrr Love it

@janinecarson8380 Жыл бұрын

Tom's throttle sound effects are golden. 😄

@michaelwpaulin4876 Жыл бұрын

The “Vibe” in the Banana with Matt , Tom and Jayme made me feel the respect and friendship that you all have for each other... almost like a Sibling thing. Matt, and Jayme you have created a great Family, Community Oriented business that I truly enjoy watching. I met you all at Jeep Invasion in Pigeon Forge ( I was amazed at the line of fans at your booth) and look foreword to doing it again this year.) God Bless you all, be safe in the shop and out and about in your work.. MWP Cosby, Tn. You

@lockedin60 Жыл бұрын

It is good that everyone in the shop gets experience in doing a wide variety of jobs. It makes the whole crew multi-dimensional. It should take some pressure off of Matt and Lizzy and Tom. You guys always seem to make things interesting. Which will continue to delight the fans.

@randymack2222 Жыл бұрын

67 is my favorite year for GM trucks!!! Last year for the small rear window...

@trif55 Жыл бұрын

"that's welding" - damn, Ed, you're a legend!

@carlholland3819 Жыл бұрын

ya i hate people that are 1 dimensional. stupid dots

@blakewilliams3702 Жыл бұрын

Jamie sure did a good job of hiding her enthusiasm about the new parade truck…..

@b52goats Жыл бұрын

Lol you know Matts gotta have 10 other "parade trucks" sitting in his lot 😂 That poor woman probably just wants to go on vacation and spend some 1 on 1 time with Matt

@TrevorDennis100 Жыл бұрын

Renovating a beautiful old truck like that could generate a lot views and new subscribers. Speaking of which, is Rory ever going to make a start on Robby's wrecker build?

@philduoos2961 Жыл бұрын

@@b52goats "What do you mean you want to go on a vacation? We just had one! Picking up that Corvair and driving it home! Just the two of us!!"

@rickclark4112 Жыл бұрын

I noticed the SAME thing..... It's just like me and my wife looking at " cool old junk"😅 Priceless!!!

@thedumbassspeaks Жыл бұрын

Chalupa Batman-I don’t remember if Matt has any daughters, but she could take a cue from Michele Cox and do the “Girl’s Vacation” option. Leave Matt sweating and grimy from doing off-road recoverys while she hangs out at the beach.

@chubbrock659 Жыл бұрын

Toms explanation of how throttle bodies works couldn’t have made more sense! Perfect!

@enderdragoon Жыл бұрын

Grandfather passed away a few months ago, he had a lot of stories about working in the Studebaker plant. He use to do the final adjustments on the factory line for the door jams so they would open/close/latch nicely. His entire toolkit for the job was a block of wood and a hammer.

@b52goats Жыл бұрын

Thats cool lol those guys had more skill and craftsmanship in a pinky than most men do now days. Sorry for your loss brother his memories and stories live through you, make sure you pass them down!

@Crewsy Жыл бұрын

So door adjustment on the factory line hasn’t changed much. Now they just use neoprene hammers and arm strength to tweak everything into alignment. New people send a lot of vehicles to final repair before they get good at it.

@willpenny1688 Жыл бұрын

Time for a new Ed T-shirt. "That's Welding?" Great to see Ed up and around.

@joeradican2023 Жыл бұрын

agree

@darekmistrz4364 Жыл бұрын

Love it!

@lanesworld4000 Жыл бұрын

Peanut riding on the forklift is hilarious. I guess she's hoping they're going on a rescue 😂

@BrokeWrench Жыл бұрын

She just loves being on things. Seeing her jump on that chair got a good laugh out of me

@PanheadJeff58 Жыл бұрын

Tom, as a former mechanic school instructor I believe that was the best explanation of how a throttle body operates ever! Those "carburetors with wires" fuel systems confuse a lot of folks.

@ken85225 Жыл бұрын

Tom has the amazing ability to explain how a throttle body works in terms that a layman can understand :)

@superchiefusn5601 Жыл бұрын

It's all in the sound effects 😁 Expertly done!

@bigmarc977 Жыл бұрын

more airflow...done

@UncleManuel Жыл бұрын

Jefe: "That's not even good for a farmer's weld!" Ed: "That's welding?" Pffffffhahahaha, you guys are brutal! 😂😂😁😁

@Ddabig40mac Жыл бұрын

Awesome to see the repair/upgrade projects getting handled. The trailer winch really looks the business now. Plus the skills building for the "C" crew is good. Those guys have such great attitudes about not being good at stuff but getting in there, having a laugh, and learning.

@ellwoodwolf Жыл бұрын

I imagine working for Matt can be long, strange hours, but he seems nice and honestly very few places will train or help employees get better anymore, so that’s sweet to guide these guys to do a little more ( even if it is a punishment lol )

@martylawson1638 Жыл бұрын

A healthy dose of "you broke it so you fix it" also encourages more respect for the equipment.

@BroncLander Жыл бұрын

If I worked for Matt, I think I would just steal Eds old trailer and not even worry about what time it is and just sleep whenever there's a lull in activity 😂

@dwcheshire Жыл бұрын

I can't wait to see what y'all build with those huge axles! The WLOW build was awesome and it has lived up to expectation.

@Shilohii65 Жыл бұрын

All Tom’s revving noise got my cat to perk up and pay attention. Must have been pretty genuine engine sounds. As for noise and interference with video taping…..nothing too significantly bad. Sounds good. Hope it works out on the trail.

@brw3079 Жыл бұрын

Matt's full throttle grin says it all😂!

@illby1971 Жыл бұрын

My Mom has a 1949 2R5 Studebaker flat bed like that in her garage that was her Dads when he passed away... It has been parked there since 1977!! One of these days I hope to get it out and running. It was an old local ice delivery truck and still has the name on the doors and cab.... I'd love to see you do something with that one!!

@randycook7226 Жыл бұрын

it's great seeing Ed out and about...and it's great always improving the fleet and your trailer's.... and having the crew giving each other encouragement to each other...and the 🐕 dog's love the attention given 😀 😊...keep making great videos 📹 👍 😀 and always thinking about your community and willingness to help other's...thanks 😀

@georgevindo Жыл бұрын

Now if they would only get on the Bombi while they have good weather and hopefully time for it.

@williamarmstrong9970 Жыл бұрын

with the bigger throttle body i hope you DON'T run out of gas!!!

@kevbev1524 Жыл бұрын

Sometimes you can turn the trailer on its side for repairs and easy access, Mattman likes to keep everyone working hard.😊

@onepunch7632 Жыл бұрын

Gm MORR! Colby and Jake are great additions to the team. Glad to have em on board.

@timothylumbrix5881 Жыл бұрын

Do you mean good MORR-ning?

@onepunch7632 Жыл бұрын

@@timothylumbrix5881 Damn! Why didn't I think of that?! 🤦‍♂️😂

@mdupuy Жыл бұрын

Matt's smile at 17:17 into the video is priceless; like a kid walking into a toy store. Love it. We also love how gentle he is with the trauma dog. Great video. ❤

@StereoSpace Жыл бұрын

I had a hot metals class in high school (I think I was a sophomore). I choose oxyacetylene welding and the forge. The welds were judged on the consistency of overlap of the beads - meaning consistency of strength across the piece - and then the welded piece was put in a vice and hammered over 90 degrees. If there were no fractures, that was an A.

@madcratebuilder Жыл бұрын

A larger TB normally effects bottom end and mid range more than top end. Depending on how smart the ECM is it can take several drive cycles for the ECM to optimize the new MAF/TPS numbers.

@oldbearsden9819 Жыл бұрын

Matt is smiling when he punched it. That tells a lot.

@MatthewBerginGarage Жыл бұрын

Don't forget to install a dual battery isolator and add the power wire to the trailer plug so the tow vehicle charging system can keep the trailer winch battery charged.

@BenK12345 Жыл бұрын

we replaced Matt's regular throttle body with Folger's crystals. Let's see if he notices!

@ReadTheShrill Жыл бұрын

18:38 Love the railroad tie they put in. I don't think I've ever seen a vehicle that incorporated wood as part of the frame before.

@webfreakz Жыл бұрын

A new cab for those giant axles that just came in? Can't wait for Wrecker-v2!

@who2u333 Жыл бұрын

That looks like a lot of condos going up around the shop. It's amazing how many people are moving to different places around the country.

@riverpirate1022 Жыл бұрын

Yea that's not good, condo dwellers do not like the noise from industrial shop garages and people road testing mods. Yall already have major water shortages out west, you need to protest your local governments until they stop permitting more developments when you don't have enough water for what you already have. It's bad enough idiots terraformed the desert and commifornia decades ago so people could live and farm there. And you wonder now why you don't have enough water, it's a DESERT idiots! Nature will reclaim what you tried to steal from her, what once was desert will be again, it's only a matter of time...... Millions of people are going to be displaced from the west and commiefornia in the coming decades due to no more water from WAY over use and abuse from housing and farming that should not exist there. A reckoning is coming for those folks. Twas a foolish man who built his house upon the sand......

@graham-martin5847 Жыл бұрын

you should have a anderson connector on the back of the tow vehicle to hook up to the winch much better idea so you can have the truck running winch runs better and faster as you have to make sure battery is charged up on the trailer all the time !

@ajwilson605 Жыл бұрын

Put a 50 watt solar panel over the battery. The trailer isn't used daily and the solar panel would keep the battery hot when it sits in the yard between jobs.

@riverpirate1022 Жыл бұрын

I said this to another reply. We are just gonna see them using the jump box on the dead battery all the time now, if they can't remember to get gas, they sure as hell won't remember to keep the trailer battery charged lol. Hard wired to the tow vehicle with a plug like an Anderson is the only way to go for a trailer winch.

@ajwilson605 Жыл бұрын

A lot of people back in the day put Cadillac 389 OHV V-8's into Studebaker trucks of that vintage. My first boss back in '67 had one in his '51Studebaker pickup...with a same vintage Hydra-Matic. That truck screamed! A real blast to drive for a 16 year old!'

@revtoyota Жыл бұрын

Now that you did the throttle body the Banana really should be put onto a dyno and actually tuned.

@georgehampton7579 Жыл бұрын

Love Tom-Toms demonstration of the function of a throttle body!🤣✌️ Gave me Tonka in the sandbox flashbacks.

@jcnme Жыл бұрын

Love Tom's Impersonation of the Throttle Body ❤😂 Ed stated "That's Welding" 👍🤣😂🤣😂🤣

@marvincarter870 Жыл бұрын

Ok it's good to see Jake and Colby stepping up and learning to weld. Matt needs these guys. Tom put a bigger throttle body on the Banana that should help and they repaired the trailer. Looks like Matt has a new project coming up.

@duramaxdad Жыл бұрын

New project is a 67 to 72 Chevy cab. Is it a wrecker? A truck? Rollback?

@marlaclarambeau327 Жыл бұрын

Nice job learning to weld. It was fun watching when Lizzie learned. She can lay down some nice welds. Regarding projects: Could it be time to work on the Tangerine and give it some love?! Jaymie does a lot. Keep up the great videos.

@DarkHawk666 Жыл бұрын

Thats what i have waiting for, and lizzys ride too.

@2CabrasLocas Жыл бұрын

The Edge throttle body on my 4.0 make the same sucking sound I heard the banana making when it was cold. It came with a programmer that all 3 sensors plug into & makes the throttle too jumpy for smooth off roading.

@stephaniewilley2224 Жыл бұрын

Perfect sound effects demonstrating how the throttle body works

@tylercousins7779 Жыл бұрын

Take that old Stdabaker truck and make a wicked off road rollback so you don’t need to take a trailer.

@MattJMillsNZ Жыл бұрын

gotta love this interaction between Jefe, Jake, Coby and Tomtom

@jarletronerud Жыл бұрын

Jake and Colby are brilliant! So positive and entertaining. MORR of this 😊

@mytwocoins Жыл бұрын

A friend of mine had a 1952 Studebaker Starlight coup and it had a 232ci V-8. I don't know what year that truck was but it may have been the original engine especially with the beefy frame under it. Can't wait to see what you picked up.

@cherokeejeeper4373 Жыл бұрын

I have a Cherokee with a 4.7 Stroker. And a 68mm throttle body from painless wiring. And you do have to open up the hole in the intake manifold. Also have a custom built head on it with 2" intake and 1.6" exhaust valves and ported and polished head and matching intake ports. And to get her to breathe, a custom header with 1.58" primary tubes and 3" collector. She is wicked!

@mattsconberg8225 Жыл бұрын

17:17 - The Smiles between Matt & TomTom - I love you guys and you guys LOVE EACHOTHER!

@zfpv7211 Жыл бұрын

Changes like that require a retune to actually get any notable difference. The computer will take a long time to “learn” the new fueling map and will probably just max out the long term fuel trims. So it’ll never actually be right if it can’t add enough fuel to make up for the extra air.

@fishingjts Жыл бұрын

Actually… if you don’t change the size of the tube hold the MAF sensor or whatever type of air flow sensor they are using you shouldn’t need to retune. The amount of air should still be correctly be accounted for. Changing the size of the throttle body shouldn’t throw off the calculations… but yeah still a good idea to watch fuel trims

@brevin4706 Жыл бұрын

An engineer explaining how a throttle body works " vrrooom - vroOOOoOOMMM" sums up all you need to know though 😂

@richardhill4862 Жыл бұрын

Tom Tom is getting better on camera, but has a hard time with keeping the surprise. Nice video!

@11Bbq Жыл бұрын

This is the most supportive work environment I’ve ever seen.

@FYMASMD Жыл бұрын

Come to the hospital I work at and checkout the orthopedic surgical team I work with. We use a lot of tools you would find familiar. Except we don’t weld.😁

@bjolley8686 Жыл бұрын

Matt is so awesome to let his employees learn on working equipment. Reminds us of Lizzy in her early welding days

@shybishop5059 Жыл бұрын

My Grandpa drove a 1951 Studebaker 1/2 ton pickup. My Grandma drove a 1953 Williys coupe. Unique vehicles even back in the 1950s and 60s. The starter on Grandpa's pickup was a floor mounted switch under the clutch pedal. You had to press down on the clutch to activate the starter. An early safety feature. While the dash instrument panel had the face in the passenger compartment, the instruments and wiring were in a box on the engine side of the firewall. No laying on the floorboard and reaching up into a cramped black hole while making repairs. During WWII America shipped Studebaker trucks to Russia under the Lend Lease program. Studebaker built horse drawn wagons long before the automobiles were being built.

@Jumpersplace Жыл бұрын

I could watch Matt loving dogs for hours on end...

@scotterdog1036 Жыл бұрын

Get a dog and love it.

@overthehedgerow Жыл бұрын

“Dirt road into a hiking trail”😂😂😂

@brw3079 Жыл бұрын

The pacing of your videography is flawless

@gustavoguerrero440 Жыл бұрын

it is good to see another people involved in welding and shop jobs, good job Matt.

@bullittdog4352 Жыл бұрын

Great video..this group of guys is a blast in the shop..and Ed getting his spunk back is awesome! I thought Matt had a new girlfriend till I heard her talk and realized it was Jamie..that new hairstyle looked great..or maybe it’s just humid out in Utah and them curls are showing up! Are we gonna have a classic truck mixed with giant military axles?

@xvsj-s2x Жыл бұрын

The Banana does sound more “Snapper” Also, Tom Tom crushed mechanical operations demo. Thank you Matt 💛 & A Team.

@garlandremingtoniii1338 Жыл бұрын

Tom can explain things to folks, as if his captive audience is around 10 years old. He’s the best I’ve seen at it.

@DeafRVTraveler Жыл бұрын

It’s awesome how Matt loves to bring old cars back to life especially the idea to use the classic truck with flatbed for parade. Just brillant.

@ADBBuild Жыл бұрын

Ah yes, vertical overhead welding. Took me a few tries to pass that test in school.

@TheEdge92 Жыл бұрын

Nice! Seeing the Studebaker I just thought that I'm in for more MORR classic restos.

@Fishguy13 Жыл бұрын

Jack up that old truck on those monster axles and have a flat bed to winch up on and avoid trailer damage. I know it wouldn’t beable to go on every trail but the ones it can would be sweet! Also a cool parade truck at the same time!

@LittleMikeStarCraft Жыл бұрын

17:13 Matts smile here is so genuine. I love it.

@merylpelosi8485 Жыл бұрын

A nuclear certified welder once told me the only difference between a good weld and a great weld is a grinder and a coat of paint.

@edzimdahl1158 Жыл бұрын

Wasn't from a certified nuclear welder, just another certified welder like myself, but have heard that numerous times over the years

@briankipper5496 Жыл бұрын

I've heard that expressed as "A grinder and paint make me the welder I ain't"

@chancewise6060 Жыл бұрын

That's crazy you guys only welded a cpl day congrats keep it up and good to see you guys on the channel more 👍

@43Waylon Жыл бұрын

Can’t wait to see what the ‘67-‘72 you are driving at the end is!

@LittleMikeStarCraft Жыл бұрын

There is just something about working on those 4.0Ls.. They are timeless, and sound amazing. I have this same throttle body, I also put a riser on in, paired with an aftermarket header and cat-delete. Helped a little. I need a post 98' intake manifold like you guys have.

@plantertrey Жыл бұрын

Jake and Colby are naturals on camera. Such charisma. SO glad to see the banana getting upgrades!

@rhondasweeney7271 Жыл бұрын

Love seeing Ed on video again, even for a short time. This was a wonderful video . Thank you for sharing!

@reddog543211 Жыл бұрын

Awsome video guys .....nice to see my Hero Ed....so much achieved by the whole crew.....cam shots and editing amazing as well....thanks for sharing this with us

@TSKseattle Жыл бұрын

The concern with newbie welders is penetration. New welders tend to just lay melted wire in to a bead, but if you hacksaw thru the joint the bare metal is virgin. If they get penetration OK the appearance is moot.

@offgridrecon Жыл бұрын

It’s cool Jake is getting more screen time. Keep it up bud! 👍🏻

@mikekuczynski1552 Жыл бұрын

Some really good editing and video work particularly the welding . Thanks for sharing

@JT-SE-OHIO Жыл бұрын

That last truck that Matt was driving was a Chevy or GMC somewhere between a 60 and a 66, by seeing some of the interior, but not sure what size. Probably one ton based on the mirrors. Just testing my memory of what I remember. The Banana has a good running 6 in it with enough power to get the job done. The trailer looks great and a 12,000 pound winch should be able to load about anything that will fit on the bed which by the way always seems just about a foot too short for the 4 seater side by side.

@timvanasen9822 Жыл бұрын

This is right crew to learn welding from & Ed's brutal honesty, nice job Tom testing the 60mm throttle body on Matt's attentive brain you got his approval, great video thank's for sharing God bless ❤😎👍

@ztwntyn8 Жыл бұрын

I didn’t expect a noticeable difference from the new tb but I didn’t realize or forgot it had a 4.7 stroker so I can see using a larger tb now.

@riverpirate1022 Жыл бұрын

Speaking of that, Matt said the banana is faster than the Morrvair....I don't see how that's possible? Doesn't the Morrvair have a bigger corvette-built motor with a supercharger? The jeep just has a pos tiny jeep v8. Sorry I'm biased, Jeeps suck lol. Toyota all day every day if you want real quality and reliability.

@NigelMarston Жыл бұрын

Really fun episode chaps. Enjoyed that a lot.

@deannalemburg10 Жыл бұрын

Peanuts jumping on chair spinning around trying to be friends with new pup in town was totally screen worthy

@lonhoschar1943 Жыл бұрын

Good video!! I like the shop competition in the "learning to weld" segment!! LOL!! Nice job on the throttle body installation Tom!! Good idea to try a few little improvements before doing a total engine swap!! I've never like the drive by wire throttle system. I have always preferred the mechanical linkage!! I hate that little delay between the stepping on he pedal and actual response of the engine.

@richardthomas1743 Жыл бұрын

Good MORRning everybody and thumbs UP to Matt and crew! 👍👊🏁🏁

@JanelleVocate-Ames Жыл бұрын

Get back down there!!!! You are in my spot!

@richardthomas1743 Жыл бұрын

@@JanelleVocate-Ames LOL I see that! I got your lucky 7 spot today! 😁

@j.e.honiball1327 Жыл бұрын

Here we go Sunday

@williamhamill813 Жыл бұрын

Welding is all about understanding the settings and proper consumables. Also, good prep work is handy. Looking good.

@terrywells3955 Жыл бұрын

Well I'm no welder but it looked ok like it will work . Can't wait to see the new project .

@ynotynot8040 Жыл бұрын

Its beyond obvious that a message is being sent to Lizzy with all the bad welding going on !!! Everyone misses her , goes without saying anything

@oswynfaux Жыл бұрын

Looks like it's new project season, wonder if the snowcat will get any love this year.

@brw3079 Жыл бұрын

Make an off-road rollback with the Studebaker truck and your new big axles

@glennsrailroading Жыл бұрын

Love those old Studebaker’s. Go for it. Another interesting video. Thank you 55-57 Tri Five’s are my favorite, especially a 5700 LCF but with a dual cab is my dream truck.

@floydstowe Жыл бұрын

Already miss seeing Lizzy she's a excellent welder not sure about the new people miss the old team

@mr.orange9134 Жыл бұрын

please as a long time viewer.. PLEASE dont let tweedldee and tweedldum do the "youtube show" again. everything else is excellent as always.

@xxbambamxx7261 Жыл бұрын

You guy's need to build a roof/shield for that winch your putting on the trailer ✌️protect it from rain and snow in winter, will help alot when the time comes... No frozen wires or anything 💪👌

@user-cq3qi7lc3z Жыл бұрын

As I was saying, Paul at fabrats got a t-shirt sent to him that read, "I know I'm on fire, just let me finish this weld". Just what y'all need! Me too.

@freeidaho-videos Жыл бұрын

FYI, batteries on trailers are always dead. Bring jump boxes. Most of the people that swapped throttle bodies had a hard time noticing anything. The dyno shows a tiny tiny difference.