No video
SONOFF WIFI Smart Switch Google Home. Sonoff Mini R2 installation
Рет қаралды 93,531
Күн бұрын"MINIR2, as a reinforced MINI two-way DIY smart switch, has been redesigned to lift the safety and performance to the optimal level. The old version MINI has an external antenna with strong electricity, but the MINIR2's antenna is hidden totally into the interior that ensures you peace of mind to use it to control your devices. " - www.itead.cc/s...
@ICTARABIC 3 жыл бұрын
Thanks, great and brief, music was a little loud
@PandasticVoyage 3 жыл бұрын
Nice information here. Keep it up!
@speedy14200 2 жыл бұрын
Tanks for the vidéo.
@evgenios1547 3 жыл бұрын
Hi, thanks a lot for sharing...excellent content...!!! As I am looking for similar solution so not to replace the existing switches but add this to have the smart capability...!!! the reason for not doing it so far and I would like to ask how is it with fitting it in the back of the existing switch...did it fit ok or you needed any modification (in the depth) to the cable box itself to fit?
@curiousbeginner3748 3 жыл бұрын
Hi Evgenios! Welcome to the channel, I am planning covering more of these topics so stick around and enjoy 😁 as for your question, no modification needed the Sonoff mini is ideal for most electrical light switch boxes, if it’s a one way switch it’s a perfect fit and with a two way switch you need to push it a little in when you tighten the screws. But during the installation you should just make keep the cables neAt to leave enough space. If you have more questions don’t hesitate to ask 👍
@evgenios1547 3 жыл бұрын
@@curiousbeginner3748 thinking on using also the r3 version for shutter control so looking forward for the material to come...
@shanksre6186 Жыл бұрын
Thank you.
@javiermendez7522 3 жыл бұрын
good video, I have a question, what kind of cable do you use? I see him very thin
@jdelluba 2 жыл бұрын
Nice video...can make tutorial how to create arc reactor similar shown in this video
@MohammedAlRabaawi96 3 ай бұрын
So that is not need zigby wave
@shix05 3 жыл бұрын
Very good explanation. However, I would like to know if it can be used in a switch which does not have neutral. If so, how to proceed? Thank you
@philharris9631 2 жыл бұрын
The module itself *NEEDS* a neutral connection - however if you don't have a neutral at the light switch position then you will probably have one up at the ceiling where the light is and you could slip it into the ceiling void.
@meraydin1 Жыл бұрын
have you watched your video before publishing it? why is that music so loud??
@Sejlund Жыл бұрын
Are you able to dim the lights with the MINIR2? Seems like you have the brightness option? I did not believe that this was possible? :-)
@curiousbeginner3748 Жыл бұрын
Hi Mikkel! Not dimmable unfortunately, would have been great for that price point
@rstante 2 жыл бұрын
Does the module and switch work independantly as if they were connected paralely? Can you turn off the light with voice if it was turned on by switch?
@curiousbeginner3748 2 жыл бұрын
Yes! Works great
@lemech 2 жыл бұрын
Hi, were you able to fit the mini R2 inside the switch box? The R2 looks too big to go behind the switch.
@curiousbeginner3748 2 жыл бұрын
Hi yes! It fits easily just had to make the cable work neat but I didn’t struggle getting it in
@alundrasrt 2 жыл бұрын
Hi, must it use internet to use the app, please? I like to install the device and use a remote without internet. Thanks.
@Teko_Tekor 2 жыл бұрын
What’s the background music?!
@somosonosomos9713 3 жыл бұрын
Thanks for the Video !, Do you know by any chance how to factory reset this device ?
@robieski 2 жыл бұрын
Where do you put the cables in the old switch?
@curiousbeginner3748 2 жыл бұрын
Any of the internet ports, plug and play, setup is super easy and convenient! One of the reason I chose the Deco system!
@nasarharoon9467 2 жыл бұрын
how many no of lights can we control with this switch!
@curiousbeginner3748 2 жыл бұрын
I have a total of 12 gu10 spots on one switch, works great!
@nasarharoon9467 2 жыл бұрын
@@curiousbeginner3748 how many ceiling lights can be control having voltage equal to 5-8 watts
@davidjose8703 2 жыл бұрын
Any risk in installing in metal box ?
@curiousbeginner3748 2 жыл бұрын
Make sure you keep the cabling proper and you should be fine
@leonardianmendiola1787 2 жыл бұрын
Hello! Is this compatible with the zigbee hub?
@curiousbeginner3748 2 жыл бұрын
Not this one in the video, but it looks basically the same and the box is orange of the zigbee version
@fizdog09 Жыл бұрын
Great video very informative hard to hear you speak over that stupid music
@jacobnapkins1155 3 жыл бұрын
Gravy
@OldYorkie-mi4ki 8 ай бұрын
The music is bloody annoying.
@vincris1 11 ай бұрын
Munnezz
@mohammadabumatar3446 Жыл бұрын
good guide but the music is just annoying no need for music in such guide videos
@teddyruxpin3811 2 жыл бұрын
Dude the music is way too loud. We came here to learn how to install a smart switch, not to rave, lol
byte sized engineering
Рет қаралды 2 МЛН
My Project Box
Рет қаралды 64 М.
Spectrum Geeks
Рет қаралды 22 М.
Massy Dattoli
Рет қаралды 30 М.
Louzano
Рет қаралды 559 М.