Sonoff ZB Micro did it! (and a bonus thing)

No video

Sonoff ZB Micro did it! (and a bonus thing)

Рет қаралды 16,804

Күн бұрын

🆓📈
A long time ago, I took an angle grinder to the humble Sonoff Micro, will I do this again? Meet Sonoff ZB Micro and Sonoff ZB Contact (SNZB-04P) - the latest devices from the ZigBee ecosystem.
🔗 Extra info: notenoughtech....
🔗 Sonoff Micro Plus (mod): notenoughtech....
🔗 Tasker overnight charging: notenoughtech....
🛒 Sonoff ZB Micro: itead.cc/produ...
🛒 Sonoff ZB Contact: itead.cc/produ...
🛒 Sonoff ZB Bridge Pro: itead.cc/produ...
=============================
Table of Contents:
=============================
00:00 - Intro
00:30 - I hacked the original Micro
01:30 - New in Sonoff ZB Micro
04:00 - What are the possible use cases
05:30 - new Sonoff ZB Contact
07:25 - pairing
08:14 - in eWeLink
09:23 - contact sensor range
10:14 - Sonoff ZB Micro and Sonoff ZB Contact in Tuya
10:55 - Sonoff ZB Micro and Sonoff ZB Contact in Alexa
13:45 - Sonoff ZB Micro and Sonoff ZB Contact in Z2M and NodeRED
13:10 - what's next and conclusions
=============================
Social Media & Business Contact:
=============================
2nd YT channel: / @techovertime
Twitter: / notenoughtech
Facebook: / notenoughtech
Instagram: / notenoughtech
Reddit: / not_enough_tech
Business Contact: notenoughtech....
=============================
Patreon & PayPal:
=============================
If you wish to support the channel monetarily, check the options here:
notenoughtech....
Created thanks to the support of the Patrons:
Robert Sheeder, Sandra Isaacs, Dane Maron, DoomedSardines, David Granz, Alan C Aspray, Daniel Galton, Leroxy, Natasha Wilding
With extra support in April from:
Graham R,
=============================
Gear Used to Make This Video:
=============================
Camera: amzn.to/3ItOkQ2
Secondary Camera: amzn.to/3spHqWr
Microphone: amzn.to/35A9fm8
Secondary Mic: amzn.to/3HuYoae
B-Roll kit:
Slider, Pan & Tilt: s.click.aliexp...
DSLR Gimbal: s.click.aliexp...
Action, Vlog Kit:
Phone: www.banggood.c...
360 Camera: www.banggood.c...
Action Camera: www.banggood.c...
Mobile Gimbal: amzn.to/3vk2Yph
Drone: www.banggood.c...
Sound Recorder: amzn.to/3M2wgip
Streaming Kit:
Webcam: amzn.to/3MhEKkJ
Microphone: amzn.to/3vnGofu
HDMI capture card: amzn.to/3IqCVkc
=============================
Music:
=============================
Hip Jazz by Benjamin Tissot - www.bensound.com
License certificate: 2213853
==========================================================
Product affiliation, sponsorships and affiliate links
==========================================================
More information: notenoughtech....
Transparency Legend:
💳 - I paid for the item with my own money
🆓 - I was interested in the item, received free of charge
📈 - I used links that bring me affiliate payments
💵 - content commissioned, I retain 100% creative and critical control
💰 - ad/ sponsored content possibly vetted by the sponsor
=============================
#Sonoff #SonoffZBMicro #SmartHome

Пікірлер: 48

@Arcao 3 ай бұрын

Now we need Sonoff ZB Micro with USB-C on both side and USB-PD support.

@notenoughtech 3 ай бұрын

I'm not sure if I can hack that much 😄😄

@themanologue2791 3 ай бұрын

I want this for my old phone that I use as a webcam. Its killing the battery having it plugged in all the time so being able to turn it on when needed or via a battery range is a great way to extend the battery life

@notenoughtech 3 ай бұрын

Take a look at the linked tasker profile about overnight charging - this can help

@shaundekok 3 ай бұрын

Does anyone know if the micro will act as as zigbee router/repeater?

@notenoughtech 3 ай бұрын

I'll take a look tonight

@karthikshetty2603 3 ай бұрын

Any updates?

@zhansida7837 3 ай бұрын

It acts as Zigbee Router

@michalociepa3353 2 ай бұрын

Has anyone tested the turbo functions? does this increase the range? I wonder if this causes interference on other channels?

@big-ted4065 3 ай бұрын

Ideal to control the various usb powered candles and fairly lights that my partner loves to have around the place only downside is how to use multiple of them on a usb hub

@notenoughtech 3 ай бұрын

If you plug usb hub to sonoff micro you can do all at once

@djweso 3 ай бұрын

This is exactly what I use the original version of this for. I control some decorative USB powered lights. I have also used AA/AAA battery->USB converters on several devices and then plugged them into USB hubs and in this because they draw so little power. Dumb -> Smart. light.

@obijuan- 3 ай бұрын

I have more than 50 Sonoff devices on my network. I used the button switch, motion and contact sensor from the first design i.e., SNZB-xx and they kept falling off the network. Even had an early version of the ZBBridge-P and still happened. Then the rolled out version of ZBBridge-P and still happened. So, was very pleased to see the SNZB-xxP version. Particularly like the wireless button switch because its 30% the price of the Flic 2 button. So, I have the -01P everywhere. But they too drop offline. Now, I am adding another ZBBridge-P across my small space to see if it makes a difference. So figured I would try the ZB Micro and ordered a couple of those too. I had good luck with the early Micro and particularly like it's price at half the ZB Micro's price.

@notenoughtech 3 ай бұрын

I won't say it loud.. but stick with me for a week. I have something you'll be keen on

@obijuan- 3 ай бұрын

@@notenoughtech I will. And I follow your work and enjoy your reviews and help. Thank you.

@JasGawera 3 ай бұрын

Use it to plug/unplug the ftdi adapter when flashing tasmota on a sonoff switch while you are trying to hold all the wires in place. 😂😂 Alexa turn on the tasmota flasher. 🎉

@notenoughtech 3 ай бұрын

Hahaha actually this would be pretty good!

@StevenFarnell 3 ай бұрын

You could use it with Octoprint. If you put that between your printer and the server, you can use zigbee binding with a zigbee wall outlet to fully disconnect your printer without modifying a cable. granted, its a lot of money to replace a tiny piece of electrical tape, but could be a fun project... I also have an IKEA desk lamp for my daughter that is powered over USB, and this could be a nice way to make that a smart lamp.

@notenoughtech 3 ай бұрын

Indeed. I used a relay inside my printers to keep them off. Having control over server is a plus, especially that then it's easy to turn it on.

@1Poe 3 ай бұрын

I use smart usb plugs to power up some 120 mm pc cooling fans during the workday, and stop them by schedule during nigh time. The fans are cooling my Msft Surface working "pc" and my Lenovo Tiny homeserver.even if the fans are 12V rated, they provide enought cool air while powered at 5V (plus they are completely silent).

@notenoughtech 3 ай бұрын

I guess you could use a dummy usb with QC 3 to trigger voltage different voltage levels too

@chrisrosenkreuz23 3 ай бұрын

Thank you for your work.

@djgrazzy 3 ай бұрын

I was considering adding to my our cats water fountain. The room already has a motion sensor but could also trigger woth espresence using the bluetooth beacon on hos collar.

@alanpaone 3 ай бұрын

I've got an old petcube usb-powered camera that kinda creeps me out because it sends me a clip of myself every time i walk past it, being able to switch the power off in home assistant whenever I'm home will be pretty great. Also we've got a SWIR camera at work that overheats if you leave it on too long, being able to switch it off on a timer without losing data transfer is way harder than it sounds.

@notenoughtech 3 ай бұрын

Nice. I'm surprised that the camera you have doesn't have a privacy shield you can schedule..but it's a great little hack

@alanpaone 3 ай бұрын

@@notenoughtech its a petcube, most of their focus was on adding a laser to play with your cat!

@TenshiTV 3 ай бұрын

I wish the ZB Micro was made to plug directly to an outlet instead of being an adapter.

@notenoughtech 3 ай бұрын

there are already smart plugs for that

@Lonestar101 3 ай бұрын

I think the Zigbee USB device would be more useful if you could plug it into the wall (AC mains).

@notenoughtech 3 ай бұрын

There are smart plugs already for that

@sygad1 3 ай бұрын

hmmm, they still have that stupid form factor that makes it useless in a USB hub, I wonder if it could be redone with a 3d printed case

@notenoughtech 3 ай бұрын

My hub is very compatible with this actually :) but yeah most of them have a very fixed pitch between ports

@jpileggi1 2 ай бұрын

eWelink is not an ecosystem known in the US. Have you tested the Zonoff devices in Home Assistant?

@notenoughtech 2 ай бұрын

I don't use HA, but I test them with NodeRED and custom coordinator. Results are very similar.

@aussiemitch5848 3 ай бұрын

Does this and all new 3.0 devices need the new E version of the dongle or will it work with my old version?

@notenoughtech 3 ай бұрын

It will work with old dongle

@eslamzidan 3 ай бұрын

Does it work with ConBee II

@eberger02 3 ай бұрын

Do you have a solar power converter? They normally have a USB-type-A female. I would put it in the solar power converter and connect it to a Power Delivery selector PCB which are super cheap- I think it can do 5, 9 and 12V? You could then power anything 5, 9 or 12V with it and turn it on/off. I think the ability to easily select the voltage with a PD PCB is the main useful thing to be, particularly the 9V. The battery will probably by 12V and normal USB is 5V but to get 9V I would need to use a buck convertor. You could then have patio lights triggered by presence sensors etc. I’ve previously made one of the previous types using the Sonoff SV, USB extension cable and a box, but that only did 5V power. I think if I un-jumpered some contacts I could have used up to 24V or something, but it would never have the ease of switching power with a PD simulator board.

@DEVAXTATOR-1 3 ай бұрын

i use it exactly for that i would like to monitor the power delivery like those that show power built in... that would be a game changer

@notenoughtech 3 ай бұрын

That sounds doable. I wish this was the USB-C version

@eberger02 3 ай бұрын

@@notenoughtechyou can buy USB-A male and USB-C male connectors and just link them with some overkill flex you have lying around. I usually use cable from stuff that comes with several cables with U.K./EU plugs etc. Cost peanuts for the connectors but they insist on you buying loads so I just end up with loads lying about. They should do a kit of random USB bits as I have so many little bags… I like the low energy use of Zigbee for anything solar panel related. Incidentally, pretty sure the Rapberry Pi has Wake on LAN functionality hidden in it. Reminds me to ask is there a limit to how many Amps it can transfer at 5V? From memory the RP5 is 5A of you don’t want it to whine.