Sound Deadening a Campervan, The Right Way - Budget Build Ep 8
Рет қаралды 114,478
Күн бұрынHow to apply Sound Deadening sheets to your camper van conversion in the right places and the correct amount. We talk about how noise is generated and what materials are best to use in each area.
Watch my previous video on sound and noise control here • Noise & Vibration in y...
The materials we have used for this build can be found here:-
Sikaflex 522 Adhesive www.ebay.co.uk/sch/i.html?_fr...
PeaceMAT Sound Deadening Sheets www.ebay.co.uk/itm/2848382977...
Closed Cell Foam Sound Absorbing Insulation www.ebay.co.uk/str/carinsulat...
Disclosure - As an eBay Partner, I may be compensated if you make a purchase using the above affiliate link. Thank you for supporting our channel.
I have put all the Fiat Ducato Build Videos in one playlist and you can watch the full build series here • Fiat Ducato Campervan ...
Please subscribe to the channel for further video updates / @gregvirgoe
If you would like to say thanks with a small gift you can do so by clicking this link www.paypal.me/gregvirgoe
Thanks very much for watching and best wishes with your own conversion.
Regards
Greg & Lou
#howtobuildacampervan #vanbuildseries #vanlife #budgetbuilds #tinyhomeonwheels #offgridliving
@justjudy7320 7 ай бұрын
❤😢 I come back to look at Greg's amazing videos and I noticed the proportion between the number of views and the thumbs up😢😢 people you can do better than this❤ Greg puts a lot of energy into this and he needs your help with the algorithms❤
@GregVirgoe 7 ай бұрын
AW thank you 🙏🏼👍🏼👍🏼👍🏼👍🏼👍🏼
@justjudy7320 7 ай бұрын
@@GregVirgoe dude I feel bad that I haven't been to your channel since you started the build because I knew I was already Beyond where you had started and I was going to move forward with you which is right about now. LOL and I'm going to keep my word and one of these days send you some money to take the misses out for dinner
@ramblingman80 2 ай бұрын
Wish I'd known about greg on my first build what a legend 🙏
@reneneron2971 18 күн бұрын
It is nice to see someone doing quality work, properly, and knowledgeable.
@CihaPet Жыл бұрын
While your videos obviously depict a specific model of van, your explanations and thought processes make your videos easily adaptable to any van. Always look forward to these.
@GregVirgoe Жыл бұрын
The principles can be applied to any van conversion so I hope it’s helpful to everyone 👍🏼😃
@DoubleUThings 5 күн бұрын
Thanx! Good to see there is not much needed for the soundproofing. I am always tempted do overdo things, so this was very helpful! 🙂
@mohammedabdulla4028 Ай бұрын
Just wanted to say Thank You. It must takes lots of effort to do these videos, and I just wanted you to know that a lot of us out there appreciate it.
@menefrega13 Жыл бұрын
Respect! You are the first whose videos I was watching who really does understand what he is doing. Most of the others are just copying what they saw in other videos without any cluy why they are doing this. Thanks a lot for all the awesome information and explanations.
@GregVirgoe Жыл бұрын
Thank you very much for recognising this and I hope you find the rest of the series just as useful 👍🏼😃
@Pugwash. Жыл бұрын
I remembered those old car adverts where a man driving can hear a squeaking noise, which he narrows down to his wife's swinging earring. It's going to happen!
@GregVirgoe Жыл бұрын
Lol 😂 yes I remember that advert too 😅that’s funny. I think now it’s a case of turn the radio up
@peerkeb738 Жыл бұрын
Finally someone who knows how to use it.
@GregVirgoe Жыл бұрын
Yes, I have been dealing with reducing noise in mechanical systems all through my career, so i'm happy to share that knowledge
@-Enginerd Жыл бұрын
Thank you for reminding people that adding sound deadening everywhere has diminishing returns. I've seen so many builds where people spend so much time applying far more than necessary. The FIT RV came out with a couple of videos in mid 2022 on this topic that I can highly recommend for those that want to understand more of the science and see some semi-quantitative results.
@GregVirgoe Жыл бұрын
I’m trying to explain that this heavy stuff is of no benefit on the deeply ridged panels as that already does not vibrate or drum like the Fiat panels do. So many are misled with wrong info. Hopefully I can help to change that. 😊
@alutious 10 ай бұрын
just saw a vid of a guy dropping a tool on the floor and showing the difference between insulating and not. Um i guess he drops tools alot? So he wouldn't be allowed to work on anything above the first floor as that is pretty much an instant termination. I keep seeing people spending 3 hours cutting small slices and doing the entire lower ridges of the floor. I might do a couple of strips behind the drivers seat/middle hallway to do a comparison. I deliberately did not buy a ton of the stuff, i will have a low roof van. I have where the windows are planned so i hope 2 boxes are enough. I will entirely cover the wheel wells, someone did a test and the thicker stuff i have didn't work as well as the thinner silver stuff. Also 2 of the manufacturer's produce in the Russian Federation, I wonder how that is going or if they have relocated. The one US company i found is extremely expensive (they sell large sheets).
@doctorpc4x4 Жыл бұрын
Aye, what are you saying LOL I do hope that was one of Lous good kitchen knives. You are making great progess
@GregVirgoe Жыл бұрын
It's one I stole from the kitchen when we were doing the Sprinter build and now its an essential van building tool :D lol
@vivienne3757 Жыл бұрын
Finding as a novice these videos very informative, thinking about having a go myself if can’t get this one😂😂😂
@GregVirgoe Жыл бұрын
I’m do feel that anyone can do this with a little help and advice. 👍🏼😃
@vivienne3757 Жыл бұрын
@@GregVirgoe it’s the insulating of the cab area I feel a little daunting and electrics but I’m sure watching this will make it seem feasible 😊
@GregVirgoe Жыл бұрын
@@vivienne3757 hopefully our cab video we did earlier has helped give you some confidence 👍🏼
@justintayser213 13 күн бұрын
This video really helped me figure out where NOT to put sound deadening. Thank you!
@Everydayonce1 Жыл бұрын
I’ve never seen a roof detach like that! Vans looking good mate 👍🏼
@GregVirgoe Жыл бұрын
There was very little original sealant that needed to be removed so maybe that was a Friday afternoon job 😂😊
@horstszibulski19 Жыл бұрын
@@GregVirgoe My first thought also, hope that the roof sheets went up and not that the beams came down, would make me think that something bended the van it self... 🤔😮 Thx for showing, especially on the mass-adding pads, I've seen people sticking them to the whole floor already... 👍👍👍
@888johnmac Жыл бұрын
lol , looks like Greg has been using the MK1 thumb-finder , aka hammer
@888johnmac Жыл бұрын
and as always .. huge thanks for sharing this knowledge
@GregVirgoe Жыл бұрын
Lol😂 did you spot something in the video? Can you give me the time stamp for it 👍🏼😃
@kimdeabill8540 Жыл бұрын
That roof surprised me, thanks for showing us.
@GregVirgoe Жыл бұрын
No problem. Something to look out for 👍🏼😃
@SPQR-Z 26 күн бұрын
This is a more common problem then people realize. Most people have no idea that the skin and structure are actually bonded together with body adhesive. Our brand new Sprinter had the same problems although not as bad. Sikaflex actually makes a specific body adhesive and I used about 3 tubes of it on every contact point between skin and structure. That really helped eliminate the tin can sound going down the road. Then the sound deadening dynamats installed and the van was literally 75% quieter then before. I recommend that anyone building a conversion van go through this exercise before insulating and interior wall panels are installed
@flashback9966 Жыл бұрын
If you are really pushed for money, you can cut the sound deadening pads in half for the smaller panels. We did this on our Transit and was still very effective.
@GregVirgoe Жыл бұрын
That’s great advice as you don’t need a lot 😊
@markwhiting3103 Жыл бұрын
It may have been a previous video of yours (i watched so many) but it was one of the best pieces of advice, was drive the van for a bit to see what needs sorting, just like you've done here. It would be an absolute nightmare to fix something like that roof after the fit out! Great video nicely broken down!
@GregVirgoe Жыл бұрын
Once you’ve done the internal strip out it’s essential to go for a drive. You are absolutely right 👍🏼😃
@-Grom- Жыл бұрын
Difference is huge, in the beginning of the video while you were driving i though something gonna fall apart ;D. Only thing i was disappointed with was when you've knocked on the panel to present the noise and then you knocked again after applying a mat on the mat itself rather than on the panel, and you did it twice! Haha. Anyway thanks for another good video.
@GregVirgoe Жыл бұрын
I could have maybe done that part a little better this shows the effect much better than I did kzfaq.info/get/bejne/idJdZ9Z7xJfbhH0.html
@-Grom- Жыл бұрын
@@GregVirgoe yup, that's good enough proof, cheers.
@thejackofalltravels8267 7 ай бұрын
Greg you just saved me about $400 us I’ve watched only 3 other people follow directions for sound dampening. Automotive panel bonding 2part epoxy is what manufacturers use. My 1 ton Dooley sprinter has some serious rattle action happening
@GregVirgoe 7 ай бұрын
I’m glad it’s helped you and I’m sure you’ll be able to sort that rattle now 👍🏼😊
@simplycampervanconversions Жыл бұрын
If in doubt, get the sikaflex out! I’ve heard that’s the tagline of a really cool KZfaq channel 😂 Great video Greg as always. Hope to catch up soon.
@GregVirgoe Жыл бұрын
Maybe I shoud l get some T Shirts made :D lol
@oldKamuffel 18 күн бұрын
That makes absolute sense. I was wondering why on other videos only products and how to install it without explaining the physics. Saved me some bucks
@pedrolg Жыл бұрын
Even though you state this is a budget build, we know it's going to be done nicely judging by your first one. Exciting.
@GregVirgoe Жыл бұрын
I have managed to save a lot on the materials for this build but I won’t compromise the quality. This build will be less than a third of our sprinter build approx £4K in total which is pretty impressive I think 😊
@flyovercounty1427 Жыл бұрын
Good ol' Stickaflex
@GregVirgoe Жыл бұрын
Lol google wanted to translate that to English. 😂😊
@andysherman711 8 ай бұрын
My dogs were going mad every time you repeatedly knocked on the van walls haha😂 great video, thanks.
@GregVirgoe 8 ай бұрын
Lol sorry about that. Good guard dogs 🐕😊
@andysherman711 8 ай бұрын
@@GregVirgoe close, idiot beagles haha
@FionanDavidatNo12 Жыл бұрын
Was on my toes this week!!!😅 Things you wish youd known the first time round! This, again, is invaluable information. We didnt know any of this and I must have papered our whole van with that stuff. 😂 You've saved a lot of people, lots of time and money. goatvanbuilder
@GregVirgoe Жыл бұрын
Thank Fi 🥰 did you get a notification 🔔🤩
@FionanDavidatNo12 Жыл бұрын
I did get one, but I also happened to be on KZfaq at the time!
@walktxrn Жыл бұрын
Ohhh Nice, I didn't realize you had a new series going, great to see. Will have to catch up.
@GregVirgoe Жыл бұрын
Welcome back 😊 link to the full playlist is at the end of the video 👍🏼
@steveharding9365 Жыл бұрын
Greg, IF CARLSBERG MADE VANS they would call it Greg Virgo. !! Simply the best.
@GregVirgoe Жыл бұрын
I’ll drink to that 🍻 cheers 😂
@stephenbennett93-20 4 ай бұрын
Great stuff mate, you’re really helping me out………🍻cheers !.
@captaincurd2681 9 күн бұрын
Thank you very much. I always wondered why stock luxury car had only limited surface sound deadening why DIYers had their whole garage covered.
@66TripsLeft Жыл бұрын
Greg, that closed cell foam lining of the wheel arch is like ASMR for us van builders, put it on a loop for us to play when we're stressed about other aspects of our builds😆
@GregVirgoe Жыл бұрын
🤩😃👍🏼 I sped it up by 50% because I thought everyone would get bored watching me do that in full. Maybe I should have left it at normal speed 😎
@66TripsLeft Жыл бұрын
@@GregVirgoe Half speed, and do an M&S voiceover: "This isn't just any closed cell foam insulation application, this is Greg Virgoe's closed cell foam insulation application." That should do it
@GregVirgoe Жыл бұрын
@@66TripsLeft that is hilarious 🤣 so funny 😆
@horstszibulski19 Жыл бұрын
🤣🤣🤣
@ericdelevinquiere9902 Жыл бұрын
Good work there from one engineer to an other! Glad you are helping people saving money on their projects!
@GregVirgoe Жыл бұрын
Hoping it will help people spend money wisely in the right places. 👍🏼😃
@user-go9hb4td8j 10 ай бұрын
To sum up this channel in one word, which word should be the one? Brilliant Superb Magnificent Skilful Articulate Awesome Structured Precise Amazing Fantastic Sharing or should it be two or three words Well Presented Knowledgeable information Camper Van Builder Video Editor The best camper van build video bar none. 📹👍 Well done both of you.
@GregVirgoe 10 ай бұрын
That’s very nice of you. Many thanks and best wishes 😃
@mausie1967 Жыл бұрын
Thank you for your wise words, again 🙂
@GregVirgoe Жыл бұрын
Glad you enjoyed it 👍🏼😃
@Lahmekful 8 ай бұрын
Mate may god add some peace and quite to your life, great vid!
@GregVirgoe 8 ай бұрын
Bless you :D
@MikeRatcliffe24 Ай бұрын
One of the best video's so far. A million m2 of sound deadening matt wouldn't have solved the de-bonded panel supports.
@mattt1974UK Жыл бұрын
OMG the rattling. I had the same problem with my Boxer. The back door still banged around quite a lot until the build progressed and the van filled up.
@pa_maj.MARTINI-van-MAN Жыл бұрын
Good show Greg! I remember when Mevi applied sound deadening to his van and realised afterwards that he hit the point of 'very little benefit' in return for £'s spent, not only that; it's unnecessary weight. Enjoying this series Greg, and of course...a shout out to Lou behind the camera, she's doing a great job 👍
@GregVirgoe Жыл бұрын
Yes theres only one or two places where you benefit from these heavy sheet applied as i've shown. The problem when other youtube videos show these pads being used in the wrong locations and it's the wrong application for the material, then everyone else copies it because they dont know any better and are looking to see what others have done. So hopefully if i can give some better advice and more importantly the reasons why, that will help a few out there. Will give Lou your regards :D Thanks
@pa_maj.MARTINI-van-MAN Жыл бұрын
@@GregVirgoe 💯%👍
@fightington Жыл бұрын
just in time! watched you for years, just starting own build, everyone on yt covering a tonne of area, they have affiliate sponsors with butyl sheet suppliers, didn't make sense, already have sheets, i'm about to start that now, what a win!! you rule greg. also, love your delivery, so calming and the working class pom thing of "nothings a big deal, we've been through it all" is a calming influence 😊
@GregVirgoe Жыл бұрын
Thank you for a great comment. Really nice to read your feedback. What I was hoping to convey was it’s about using the right product in the right area and that noise reduction on floors and wheel arches is better dealt with by sound absorbing foam and not by sound deadening sheet. Hope that was explained ok 👍🏼
@alanhat5252 11 ай бұрын
7:20 I like to place the pads _almost_ in the middle & slightly twisted. As you pointed out a few seconds previously you're trying to stop the ringing & placing the pad exactly is likely alter the pitch of the ring rather than stifling it.
@jimrodda Жыл бұрын
Hi Greg, I was watching a van build from the USA and he called it 'Rattle Trap', same thing one panel one piece, great series thanks Greg 👍
@GregVirgoe Жыл бұрын
That’s a great name for it as it’s designed to stop vibration only 👍🏼😃
@fraserhardmetal7143 Жыл бұрын
Good to see you back Greg - the bonded joints you replaced highlighted a real problem with the way these vehicles are made. Bonded joints represent a large proportion of the strength and integrity of the vehicle's structure - there is obviously a deterioration in the bonded joints over time, as you demonstrated with the roof panels. On older vehicles it may be prudent to re-inforce bonded areas with a fillet of Sikaflex even if they appear sound - where the bond has deteriorated it makes sense to remake the joint as you did with the roof. It would not be too difficult to do this, as once insulation and trim has been fitted the parts of the vehicle with failing bonds can move around and not be noticed.
@cosy.adventures Жыл бұрын
Top job as usual
@GregVirgoe Жыл бұрын
Cheers John 👍🏼😃
@DragonflysWish Жыл бұрын
You just saved me some quids, thank you! Got quite an amount of mats from people who just finished their vans and thought I'd need twice as much! Brilliant, many thanks 😊
@GregVirgoe Жыл бұрын
I’m glad that it has helped you
@hegster1966 Жыл бұрын
Great advice
@GregVirgoe Жыл бұрын
Thank you 🙏🏼
@hegster1966 Жыл бұрын
@@GregVirgoe am about to do same van this info is invaluable mate
@GregVirgoe Жыл бұрын
@@hegster1966 that’s awesome 😎 hope it all goes well for you 👍🏼😃
@nfi2nfi2 4 ай бұрын
Just as an additional thing you can use 3M double sided tape and the Sikaflex together if you’re impatient for waiting for Sikaflex to dry. good for situations where it’s a panel and you just want to stick and get on with it to finish the build. I’ve done it a lot with roof paneling etc where screwing wasn’t an option.
@TheBainzz Жыл бұрын
Honestly, the most informative and detailed explanation on van fitouts on youtube. You're an icon Greg!
@GregVirgoe Жыл бұрын
I plan to fill in a lot of the gaps left out of other videos.. Glad that you approve :D
@jimbartley9125 Жыл бұрын
Very good explanation. Thanks. Jim
@GregVirgoe Жыл бұрын
Thank you Jim 👍🏼😃
@cliffy7641 Жыл бұрын
Hi Greg i watched every episode of your sprinter build and was in awe of your talents and simple explanations, this ones no different. Thank you its helped with my build a lot.
@GregVirgoe Жыл бұрын
What are you building Cliff and do you have much left to do now?
@user-rt9mo4ng8e 6 ай бұрын
I never thought to do that before I started glad I watched it , Thanks .
@GregVirgoe 6 ай бұрын
Yes, most of the rattles etc can be from lose panels
@GF-mf7ml 10 ай бұрын
Now I understand why my friend only use foam at wheel arch.
@GregVirgoe 10 ай бұрын
Exactly it’s using the right material for the right application 👍🏼😃
@ronbooth1382 Жыл бұрын
Love it Greg, another excellent video. I don't mind the rattles in my small van - it just means I can't here T singing!!! Love to Lou
@GregVirgoe Жыл бұрын
Lol😂 I can’t show this to Lou now as you know it will get back to Tina 😮 then you’ll be in trouble 😊😅 looking forward to next weekend
@carloknuwer1026 Жыл бұрын
Greg Virgoe, the grandmaster of diy camperbuild.😊
@GregVirgoe Жыл бұрын
I really appreciate that, Cheers :D
@MijnCampervan Жыл бұрын
O My God, you are really inspiring me so much! In my mind I've build plenty of vans (as a preparation of the real stuff 🙂) but you show us there's plenty more to think about while converting a van!! Episode 8 and still nothing build. I love it!! Keep up the good work Greg, looking forward to the following episodes!! Looking forward to all those tips and tricks you'll give us!!
@GregVirgoe Жыл бұрын
This is defnately not one of those "from start to finish in 30 seconds" series LOL :D I want to show all the bits that others leave out, if you want to see a van built in great detail here it is
@LondonCarnaval Жыл бұрын
Awesome 👌 Super 🆒️ 👌 👏 👍 Thanks for sharing this info and advice and tips with us. Great stuff 👏 👍 👌 🙌.
@Rideitoutyoutube 7 ай бұрын
iveliterally been bugging out to what the rattle in my van is! ill check the body panels tomorrow! awesome content dude. i have an 06 relay... shape before yours!
@GregVirgoe 7 ай бұрын
This is an 06 too but a Dec model so the first of this shape. 👍🏼😊
@CianArranEoin Жыл бұрын
What a difference that made, savage 🤙🤙🤙
@GregVirgoe Жыл бұрын
Oh it was, 100% better 🤩
@SenselessUsername 2 ай бұрын
I'm watching too many van build videos, but --- I'm baffled how most of them are designed like static objects. Very few channels care about weight (or is the 3.5tonne limit a purely European limit?) so chuck in the 2x4s and 18mm ply for everything; either zero sound-deadening or 80+% coverage of floor and walls (skipping ceilings); and everything fixed as stiff as possible (as if a metal van doesn't expand in heat and twist on roads). Many are either super advocates of sound deadening panels but with no rule-of-thumb of where to focus or what amount of coverage, or just say "it's too heavy"; and many say the opposite of their initial advocacy in their "1y later, what would I have done differently?"-video (and again, they suggest the opposite without showing where the balance lies of needed work/cost/effect/compromises like lost space). I think you're the first I see that takes the stripped van for a short drive and listen!! Insane.
@vincentlehmann646 Жыл бұрын
excellent as usual ! amazing this noise !
@GregVirgoe Жыл бұрын
Thank you 😊
@MuddyBootz Жыл бұрын
Nice one Greg… attention to detail, second to none 👌
@GregVirgoe Жыл бұрын
Thank you, really appreciated
@robenhenni8463 Жыл бұрын
Another interesting video and learned a lot I will keep following 🇱🇺
@GregVirgoe Жыл бұрын
Many thanks Rob 👍🏼😎
@Albert_206 Жыл бұрын
Helemaal mee eens 😃😃
@robenhenni8463 Жыл бұрын
@@Albert_206 nog meer Hollanders 🥰 More Dutchmen
@user-rr9dy3gt4c Жыл бұрын
Great demonstrations here, I just sound deadened my van and hadn’t re bonded the panels so I will be getting that done this weekend!! Thanks!
@GregVirgoe Жыл бұрын
It’s a quick job to do but will make a huge difference to noise later on
@johnwren3976 4 ай бұрын
If you get a higher mileage van, check the two plastic anti-rattle pads on the floor at the center of the rear doors.
@harryscat Жыл бұрын
An other brilliant video. Thanks 😊.
@GregVirgoe Жыл бұрын
Many thanks 🙏🏼
@tomryder6797 10 ай бұрын
This is great, I wa savour to apply to the whole van as per lots of videos. Was concerned about the weight
@GregVirgoe 9 ай бұрын
Yes just no need to use much of this material. Just waste of money and as you say too much weight.
@destinationscratch9189 Жыл бұрын
The legend of Virgoe just grows and grows! Great content
@GregVirgoe Жыл бұрын
That’s very kind of you. Many thanks 🙏🏼
@normanboyes4983 Жыл бұрын
Greg - a very ‘sound’ methodical approach, very well explained. (See what I did there 😉). Thank you.😀👍
@GregVirgoe Жыл бұрын
HaHa yes very good indeed :D Thank you
@anthony342 6 ай бұрын
will use these on the astra van ive just got , cheers
@GregVirgoe 6 ай бұрын
You are welcome 🙏🏼
@garyhollywell2112 Жыл бұрын
Great Vlog Greg I have seen people use lots of that material in their builds and often reflect back to the Sprinter build to question if theirs is overkill! Looking forward to more Vlogs many thanks
@GregVirgoe Жыл бұрын
It’s about using the right product. The heavy pads are only designed to stop vibration. If you want to stop road noise or rain on your roof etc then you need a sound absorbing insulation like dense foam sheets to absorb the sound waves come through the structure from outside.
@GeoffAnthonyClinics Жыл бұрын
One word “excellent” - Thanks Greg! 👍😀
@GregVirgoe Жыл бұрын
Amazing 🤩 thank you Geoff 👍🏼
@charliecalderwood1 5 ай бұрын
Thanks Greg. Really useful start to my van conversion. To the point and dispelled a lot of the nonsense that is out there. Much appreciated. I look forward to more, as I watch your build progress, and prepare for mine.
@christierichardson4663 Жыл бұрын
Excellent video.10+ Thanks a million for that❤
@GregVirgoe Жыл бұрын
It’s a pleasure Christie 😊🙏🏼
@user-jn8wf1xi6u 4 ай бұрын
Would you cover the ribs in closed cell insulation, Greg? Just thinking about bridging and condensation. I've seen some do that, but generally doesn't seem to be done, which I can't figure out. Thanks again for your top class channel and all your knowledge and ideas 👍
@GregVirgoe 4 ай бұрын
If you cover all your insulation with a complete vapour barrier including sealing the edges down to the floor then no moisture can get in there to condense so there is no need to worry about the gaps. Have you seen this video I made to prove this? kzfaq.info/get/bejne/pdOdpLB4nLjOiJs.htmlsi=jIqVv1yQ8OUKANia
@hectordetectorist6919 Жыл бұрын
Just to say that you do a great job in these videos. You are knowledgeable, the subjects are well researched and you put everything across in a succinct and easy to follow way. Thanks mate, you are a diamond geezer
@GregVirgoe Жыл бұрын
That is very kind of you to say so and thank you for taking the time to leave really positive feedback 😃
@hectordetectorist6919 Жыл бұрын
@@GregVirgoe no worries . I appreciate the amount of time and effort it takes to produce such great videos.
@placestosea Жыл бұрын
so glad you posted this, its exactly what we found, no need to go excessive. there are ways to save cost, time, weight and space.
@GregVirgoe Жыл бұрын
Glad to Sea you are also on the right road :D
@gordonosborn3251 2 ай бұрын
Great info, thanks mate.
@OliverTwist-kr8gm 19 күн бұрын
Awesome job..Thanks
@davidjenkins9842 7 ай бұрын
Excellent presentation and certainly the way we'll go with our Sprinter conversion! Thanks Greg!!
@johandypablofrias3453 3 ай бұрын
Amazing man !!! Thank you
@tomvickers3523 4 ай бұрын
You did a fine job
@suffolkseries3319 Жыл бұрын
Great work mate. I like the 3-1 solution for the wheel arches. 👍
@GregVirgoe Жыл бұрын
My use more products when one will do right :D
@bobacitramone 5 ай бұрын
Super and informative, and nice comparison before and after
@GregVirgoe 5 ай бұрын
Thank you very much. It was like night and day. 👍🏼😊
@maddog19671967 21 күн бұрын
i like that you are so meticulous greg , anyone buying a van from you would have a really good deal , i would definitely buy it....
@BotaFaCose 5 ай бұрын
Commenting every single video just because you truly deserve all our support. Thanks for the instructions!
@barrytimm5497 Ай бұрын
Excellent!
@Zalley 2 ай бұрын
Great info, well explained - thanks!
@mikespeers8281 Жыл бұрын
Nice one Greg, thanks for sharing.
@GregVirgoe Жыл бұрын
Thanks again Mike. 😊
@alitheiaziton5188 Жыл бұрын
Haha, top job again Greg as always.. Been watching a few of your budget build and low and behold I just did the same to my ribs and panel stays on the Sprinter as I have had chance to crack on and get something done. I used the 3M 560 PU which is pretty much the same as the Sika, albeit it does shrink a tad compared the Sika. Will continue catching this journey. Take care!
@robertturner4225 Жыл бұрын
another excellent video thank you and your good lady
@suetaylor6534 22 күн бұрын
Fantastic, good man you are.
@markwhitehead1658 2 ай бұрын
Superb.👍👍
@johnstokes9647 11 ай бұрын
Such a relief to have clear instructions and well thought out ideas thanks Greg .
@GregVirgoe 11 ай бұрын
I’m pleased you are finding these videos to be useful to you 👍🏼😃
@marcinom3414 Жыл бұрын
Good job. Can't wait for more videos !
@GregVirgoe Жыл бұрын
I’m glad you are enjoying this series. 😊
@user-jn8wf1xi6u 4 ай бұрын
Fantastic! So appreciate all of this quality detail, Greg. Absolute gold dust!
@ifell3 Жыл бұрын
Great video ❤
@GregVirgoe Жыл бұрын
Thank you
@MrSham61 Жыл бұрын
Well done Greg !👍
@GregVirgoe Жыл бұрын
Many thanks 🙏🏼 😊
@donnagreen4383 6 ай бұрын
Very informative, thorough & say to follow. Thank you
@garyesler2948 Жыл бұрын
Great videos very informative 👍
@GregVirgoe Жыл бұрын
Glad you like them 👍🏼
@rextilian 3 ай бұрын
Excellent video. Answered all the questions I had about insulating and sound deadening. Thank you.
@john-xx8nc Жыл бұрын
Brilliant vid full of good info cheers
@GregVirgoe Жыл бұрын
Thank you John 😊
Will’s Whereabouts
Рет қаралды 160 М.
Car Builders - Sound & Heat
Рет қаралды 243 М.
Greg Virgoe
Рет қаралды 82 М.
INDI_VAN_A_JONES Vanlife UK
Рет қаралды 11 М.
Jammy Gits
Рет қаралды 464 М.
EXPLORIST life Mobile Marine & Off-Grid Electrical
Рет қаралды 485 М.