Building a High End Small 3-Way Stereo Tower Speaker

Building a High End Small 3-Way Stereo Tower Speaker - by SoundBlab

Рет қаралды 651,693

Күн бұрын

The design and drivers used in this speaker build project is inspired by a few manufacturers that have used similar off-the-shelf drivers in their commercial designs. Some of these commercial speakers retail in the region of US$4000 for a pair. Considering that the total cost for the drivers I am using are less than US$200, I set out to design my own set of speakers using some of these drivers. I am super happy with the outcome. These speakers are now my favourite to listen to right now, and I think they will be for some time to come!
Check out the Small 3-Way Stereo Speaker Build Version 2.0 build here: • Building a High End Sm...
BUILD PLAN: soundblab.net/build-plans/
Join this channel to get access to perks:
- / @soundblab
OR
- Become a Patron - / soundblab
Support SoundBlab:
- Subscribe to my channel - goo.gl/EWMSXV
- SoundBlab Website and Build Plans - www.soundblab.net
Follow me:
- Instagram: / soundblab
- Pinterest: / soundblab
- Twitter: / soundblabs
Contribute Subtitles for my videos:
- kzfaq.info_cs_p...
Some of the Parts used in this Build:
- Tang Band W5-1138SMF 4 ohm Subwoofer - (US) parts-express.sjv.io/DV9Lg5 , (EU) bit.ly/3GRGyPB
- Tang Band W3-881SJ 3" Cast Frame Neodymium Driver - parts-express.sjv.io/9W4eP4 (US), bit.ly/3gWfra1 (EU)
- Dayton Audio ND25FA-4 Tweeter - (US) parts-express.sjv.io/jWx13M , (EU) bit.ly/3wgunqI
- 50 feet of speaker wire (14 AWG) - (US) parts-express.sjv.io/e4yRJz , (EU) bit.ly/39erRI4
- Red and 2x Black Insulated Speaker Binding Posts - ebay.us/6YZe2M
- Polyester Batting - amzn.to/3bJfBhF
- 0.8mm Solder Wire - amzn.to/2SSpEIo
- Speaker Spikes (stick-on) - amzn.to/3bEhqw5
- Speaker Spikes (screw thread) - amzn.to/2SO0VFb
- Speaker Spikes (large for front spike) - amzn.to/2SO0VFb
- Speaker Brackets and Spikes (no need to make your own feet brackets, use this all-in-one solution) - amzn.to/3bJPgzJ
Recommended Gear, Tools, Amplifier Modules, Speaker Drivers, and more...
www.amazon.com/shop/soundblab
Audio Components & Solutions:
- Parts Express (US) - parts-express.sjv.io/yRNVk2
- Soundimports (EU) - bit.ly/3B0xWEn
- Axiomedia (EU) - bit.ly/3TUQUoA
Music: www.epidemicsound.com/referra...

Пікірлер: 710

@SoundBlab 3 жыл бұрын

IMPORTANT NOTE: The Fountek FE85 driver seems to be either out of stock, or discontinued. Either way, I am working on an update for this speaker with a new driver, and will be releasing updated build plans hopefully within a couple of months from the time of posting this comment. In the meantime the current BUILD PLANS have been removed from my webshop. I apologise for the inconvenience, however these are circumstances beyond my control.

@arvlux1872 3 жыл бұрын

Thanks for the update,, it is really appreciated to know you are working on an update as I am near to be finished with my build where only the fountek drivers and corresponding holes are missing Let’s hope you can find a good substitute driver with minimal impact and still high performance. Crossing my fingers; It looks really great already ...

@lisaclayton9651 3 жыл бұрын

Great to know this & really impressed with how quickly you've addressed this , I have an order placed for the founteks with a uk supplier & they are saying possibly July arrival at the earliest so will keep an eye on your findings regards an alternative. I'm just at the start of my build so plenty of time to play about with an alternative

@dtyra 3 жыл бұрын

Could this be a drop in replacement? www.parts-express.com/Fountek-FR89EX-3-Neodymium-Full-Range-Driver-296-721 I would like to buy the plans anyway if that's possible.

@SoundBlab 3 жыл бұрын

I am reluctant to go with the Fountek drivers, since they seem to have a lot of supply problems right now, without really being able to say whether these drivers will even be available again.I have found a Tang Band driver that can work. But right now I can't comment if it will be a drop-in replacement, still in the process of testing.

@dtyra 3 жыл бұрын

@@SoundBlab Thanks for your prompt reply. I am interested in building these, so I am looking forward to your progress!

@henryrichards1556 5 ай бұрын

I have just finished building these and they sound incredible. I am so pleased. My first speaker project and it went great.

@SoundBlab 5 ай бұрын

Great to hear, thanks for the feedback!

@MrMarnix1234 4 жыл бұрын

Really enjoy that you're explaining what you're doing in every shot

@timschutte6924 4 жыл бұрын

These drivers are the best for the human voice and instrumental type of music. The quality of the cabinets you built are second to none. Absolutely brilliant

@SoundBlab 4 жыл бұрын

Thanks again

@milesdufourny4813 4 жыл бұрын

I've been watching your channel for a number of years now and I think this is the best speaker you've designed and built.

@SoundBlab 4 жыл бұрын

Thanks!

@ruud24k 4 жыл бұрын

Cool video! I really like how clearly you documented the process. Keep up the great work :)

@SoundBlab 4 жыл бұрын

Thank you

@duantorruellas716 4 жыл бұрын

Wow those are great , I can hear the air and separation from here. I think that design is incredible. That narrow front bafflle and side firing woofer design does allow the sound to wrap around the cabinet thuss making the speaker disappear.

@SoundBlab 4 жыл бұрын

Thanks!

@gunnar045 4 жыл бұрын

i am more impressed by the amount of tools you have. remember my fathers workshop wasnt something he had overnight. love your teaching and explanations!

@SoundBlab 4 жыл бұрын

Cool, thanks!

@Negativezero48 4 жыл бұрын

Got the plans, ordered the parts, and am putting it together now! Really cool enclosure design.

@Linesy 3 жыл бұрын

How did you go? Did you finish them?

@PopGunEnt 3 жыл бұрын

results?

@proz71ful19 3 жыл бұрын

Uhoh.. the project killed him

@gigiboxa 7 ай бұрын

one here who has the speakers version 2 for over an year as main speakers dive them with a marantz pm7001 the soundstage is great an not so deep as with some jbl 830 for comparison the voices are in front of you but no piercing to your head ,i think is because of the side woofer the good point is that they are not create fatigue after long hours of listening they need a sub to hit below 35 hz wife aceptance is verry high i`m working on the crossover to lower the cross freq. i believe that the mid driver can go lower still keeping the original crossover just in case

@_gheo 3 жыл бұрын

I've never seen such well though and careful build. There's so much to learn from you! Thank you for sharing ❤️

@SoundBlab 3 жыл бұрын

Thank you so much!

@verhoeff95 4 жыл бұрын

Lovely design and they seem to sound great. Also made my own floorstanding speakers. Very fun thing to do.

@SoundBlab 4 жыл бұрын

Thanks man!

@stephenmcbride6359 3 жыл бұрын

From a fellow speaker builder, I love the build.I go out of my way to build weird and different speakers, just because I am bored of building what's expected.I have done something similar, except with a 6 1/2 and a transmission line /folded horn type box. Height and width seem similar.It's the fun of squeezing every last ounce out of what you have built.

@SoundBlab 3 жыл бұрын

Thanks man! Yeah, I like to experiment with builds that are not necessarily typical, but I do try to cater for both approaches.

@haley8004 4 жыл бұрын

I always like it when during a listening demo the camera is moved around the speakers. You get a good idea of the sound stage that way.

@SoundBlab 4 жыл бұрын

I used very linear microphones to record these, not the camera mic, so thats why the camera is stationary. This way it gives you a very good linear and consistent response of what each speaker sounds like in its position in the room.

@klokibril 4 жыл бұрын

Brilliant! Good example of creativity and craftmanship. You are an inspiration.

@SoundBlab 4 жыл бұрын

Thank you!

@jayweb702 3 жыл бұрын

The sound is wonderful and your frequency graph looks impressive! Great job.

@SoundBlab 3 жыл бұрын

Thank you kindly!

@timschutte6924 4 жыл бұрын

Very nice job. Those tang ban woofers are awesome.

@roninmantis7584 4 жыл бұрын

Nice to see how the build goes together. Also the tools involved. Thanks

@SoundBlab 4 жыл бұрын

Glad you enjoyed it

@DaveB1v 4 жыл бұрын

My heart was in my mouth watching you with that screwdriver! Haha. Lovely speaker build, I need to rewatch this on my AV system so I can hear it being tested

@SoundBlab 4 жыл бұрын

Glad you liked it!

@booncheongwee3025 3 жыл бұрын

Ya...i was grinding my teeth too 😥....but the end result was fantastic

@edwingm8790 4 жыл бұрын

Thank you for another therapeutic build video.

@SoundBlab 4 жыл бұрын

Pleasure!

@fsouzajr 4 жыл бұрын

well done!! Beautifully made, congrats from Brazil!!

@SoundBlab 4 жыл бұрын

Thank you very much!

@KevinNguyen-zn4vv 4 жыл бұрын

I'm listening to this on my mac air speakers and man, I'm sold. I can't imagine how they would sound in real life.

@henryrichards1556 5 ай бұрын

They sound amazing. I just finished building my own set.

@henryrichards1556 5 ай бұрын

Paired with my Dayton Audio HTA100. Loving them.

@KevinNguyen-zn4vv 5 ай бұрын

@@henryrichards1556 I need to build a sound-isolated room in the basement for all my toys, otherwise the neighbors would hate me when I'm pushing like 2K watts :D.

@logotrikes 3 жыл бұрын

I think essentially this is how the manufacturers make their speakers. For many commercial reasons, the retail price price ends up being many multiples of base cost. Therefore if you have the gear, the time, knowledge, money and temperament, you can have something like these speakers for a fraction of the cost of commercial units, and much the same sound. Remember that manufacturers invest many $$ in R&D and expensive production equipment. These speakers come from a dude in his workshop, but that doesn't mean you can't end up with a hefty slice of the sound of a commercial unit. And, the big attraction is the feeling of accomplishment you get from a project like this. I very much enjoyed this. Wish I had what is needed to make the things. They're very appealing to me for many reasons...

@henryrichards1556 5 ай бұрын

I made these speakers and I can attest that they sound fantastic. The project was also very fun for me as I had built furniture and boats in the past but never something like this.

@attainableaudio4533 4 жыл бұрын

Very nice. And I like the way you addressed the price some speaker manufacturer charge, people who always bauk at the prices stating that it only cost x amount of money in parts... We'll look around almost anything you buy you could say that about... Literally just about everything!

@SoundBlab 4 жыл бұрын

Thanks

@rickjreyes 4 жыл бұрын

Great video, I very much like this style of video, explaining your reasoning and step by step of what your doing on the video. Way more engaging than music through out the video.

@SoundBlab 4 жыл бұрын

Glad you enjoyed it!

@FaridShakil 2 жыл бұрын

WOW, Those Small Speakers Are Really Producing Some Excellent Sound Quality With Brilliant Details.

@SoundBlab 2 жыл бұрын

Thanks

@FaridShakil 2 жыл бұрын

@@SoundBlab Sir, Is There Any Way To Purchase Your Speaker System From Bangladesh?

@LifeofBliss 4 жыл бұрын

Great video sir. I stumbled upon this while taking a break from editing a similar video I'm doing myself. Those turned out awesome. Gotta love those tang band drivers...

@SoundBlab 4 жыл бұрын

Thanks man! Tang Band do make great drivers. Looking forward to see your video.

@ivander1511 4 жыл бұрын

You're always having a good work! Nice looking finish! :)

@SoundBlab 4 жыл бұрын

Thanks

@garychamberlain3718 4 жыл бұрын

Great work, very soothing to listen to and well demonstrated.

@SoundBlab 4 жыл бұрын

Thanks 😊

@mikenaughton4298 4 жыл бұрын

Thanks for this. Nice to see such excellent work.

@SoundBlab 4 жыл бұрын

Thank you!

@leonking9459 4 жыл бұрын

Unique design, out of the ordinary.. yet it sound cool.. great job..!

@SoundBlab 4 жыл бұрын

Thanks!

@romanengelbrecht6717 4 жыл бұрын

Im so proud of this guy hes setting a good standard for speaker builds and hes South African honestly mahn more people should know about your work i make and sell speakers myself but im totally in auuw from your designs and techniques ive learnt alot that i incorporate into my own builds so thank you youre a legend and you deserve way more recognition i mean 87k subscribers but im talking about South Africans needa jump on this instead of supporting these huge manufactures whe only care about passing quality control tests and making tons of money i know builders that build from home generally try make it as affordable as possible whilst trying to get the best quality sound out of the unit i mean theres a passion to it and kinda nerdy factor that you need to achieve great speaker builds lets face it you need a certain sense of discipline to do what you do

@SoundBlab 4 жыл бұрын

Thanks man! Appreciate it!

@t-go8812 4 жыл бұрын

Nice job man, really enjoyed watching

@SoundBlab 4 жыл бұрын

Thanks

@SoundBlab 4 жыл бұрын

The BUILD PLANS for this project can be purchased here: soundblab.net/build-plans/ . It includes a comprehensive 26 page description of materials, parts, etc. on how to build these speakers from beginning to end.

@3rutu5 4 жыл бұрын

looks like you were inspired as well buy a speaker that starts with a "B".....i like the bookshelf version personally, but not keen on that price tag :) Great work as always :)

@dakken74 4 жыл бұрын

I have found that with side firing woofers its beneficial to make the speakers a 2.5 way instead of a 3-way. That is having the 2 front driver behave as a full 2-way and have the side firing woofer lowpassed to fill in the bottom end maybe up to 200 Hertz

@justkiddin1980 4 жыл бұрын

Maybe a stupid question, but wouldn't it be better to round over the edges completely from the port on the inside?? Because now you have a sharp edge on the inside of the cabinet..

@OzzyCPT 4 жыл бұрын

Hi. Are you South African? If so, how much are you paying in shipping, taxes, duties, etc. on top of the $200 for the speakers? This has always made me scared to buy from Parts Express. Great work as always :)

@SoundBlab 4 жыл бұрын

@3rutu5 Thanks! Yes mostly..

@presidentpotato222 3 жыл бұрын

Great Video .. as someone who owns Boenicke W8se+ speakers .. i see many similarity’s in design .. and I bet these sound absolutely Gorgeous ..wonderful build guide .. my hats off to you ..

@SoundBlab 3 жыл бұрын

Thanks!

@timschutte6924 4 жыл бұрын

, very professional job. Beautiful speakers. This particular design of speaker with the side fire woofer is my favorite Has been all my life. I have 4 large floor standing speakers with side fire 8 and 10 inch woofers made by acoustic audio that are decades old but still out perform anything I've ever had or heard for that matter. I love the tang band woofers.

@SoundBlab 4 жыл бұрын

@davidnewboult6887 3 жыл бұрын

Great video, nice looking speakers and they sound fabulous. Nothing more to say except thanks.

@SoundBlab 3 жыл бұрын

Glad you like them!

@carlosmacmartin4205 2 жыл бұрын

Very nice sounding music examples! I'm glad I found this video. Now I'm wishing I had a small workshop and tools to build a pair these speakers. Oh well. Perhaps in the near future. Thanks for sharing, mate! Cheers!

@SoundBlab 2 жыл бұрын

Thanks man!

@igorschannel 4 жыл бұрын

they sound spectacular!

@SoundBlab 4 жыл бұрын

Thanks, I think so too!

@timschutte6924 4 жыл бұрын

This particular design is very unique. I have 4 old acoustic reasherch speakers with 8 inch side woofers on one pair and 10 inch on the other set. These unique designed side mount woofer speakers actually out performed way way way better than the JBL floor speakers I used to have. Not by a little, I mean blown out of the water. Those JBL speakers had dual 8 inch woofers. I love this design cause it seems to have an enormous bass frequency. And saves space cause the are a slimmer speaker vs. The traditional front mounted design.

@SoundBlab 4 жыл бұрын

@macukfalcon7888 3 жыл бұрын

Great work boet! Build sounds great! Respect ✌🏻

@SoundBlab 3 жыл бұрын

Thanks man!

@marquepadley2715 4 жыл бұрын

Those sound Awesome, Well done, very good looking also. Big thumbs up.

@SoundBlab 4 жыл бұрын

@wagnerluiz8097 3 жыл бұрын

Cara admiro seu trabalho, Vc é um gênio!!! Parabéns. Obra de arte.

@SoundBlab 3 жыл бұрын

Thanks so much!

@endall39 4 жыл бұрын

Really well done project!!

@SoundBlab 4 жыл бұрын

@FXtremeElectronics 4 жыл бұрын

Great build as always! Very neat:)

@SoundBlab 4 жыл бұрын

Thanks!

@blakey271able 4 жыл бұрын

To be honest it sounds bloody good on KZfaq never mind real life very enjoyable to watch

@SoundBlab 4 жыл бұрын

Thanks

@dahoetube Жыл бұрын

Wauw, didnt expect that (result). Beautiful build. Great job.

@SoundBlab Жыл бұрын

Thank you very much!

@bradsample9529 3 жыл бұрын

Bought the plans and built two sets! ABSOLUTELY LOVE THEM! They sound beautifully deep, and have a directional but all encompassing soundstage that just makes you want to keep listening. Great design. If you have the tools and the know how, I can not recomend them enough! Oh, and while I plan to get an amp with some more wattage; I am currently powering them through a JVC A-S5 that is only 30 watts a side. They sound lovely in my living room.

@SoundBlab 3 жыл бұрын

Hi Brad, I am so happy that you like the speakers, and well done for finishing them. Would love to see some pics? Thanks for the positive review, it helps me and others a lot to hear from someone that has actually built these. Enjoy!

@bradsample9529 3 жыл бұрын

@@SoundBlab sure! I’ll send some pics in the DM section.

@bradsample9529 3 жыл бұрын

@@SoundBlab I sent those pictures to your Instagram account. Let me know if there is a better place to send them. Thanks again for a great design. Both sets that I made sound absolutely beautiful.

@hushpuppykl 4 жыл бұрын

You done a great job! It’s looks superb and the demo sounds good. Very balanced for sure. 👍👍

@SoundBlab 3 жыл бұрын

Glad you like it!

@hushpuppykl 3 жыл бұрын

SoundBlab ... if I tried to build it, will look worse than Frankenstein. How I wish can just order it. I’ve listened to the Boenicke a lot ... W5, W8 and W11. This sounds good. Very good.

@tttuberc 3 жыл бұрын

These two speaker boxes sound amazing

@SoundBlab 3 жыл бұрын

Thanks man!

@jeremygunkel 4 жыл бұрын

Love the TV riser blocks :)

@SoundBlab 4 жыл бұрын

Lol, how to use cheap speakers!

@silvertamman3218 3 жыл бұрын

Very nice build! I recomend to make chamfer inside of the mid driver hole and if bass driver is playing so high, then there as well. This midrange is so tiny, basket will not reach much to the box, so chamfer will reduce reflections coming back to cone from hole walls. Also, you can but that self- adhesive foam what you used to sealing on the driver baskets to reduce them ringing.

@SoundBlab 3 жыл бұрын

Thanks!

@kishorehublikar1576 3 жыл бұрын

Great work! Excellent workmanship. Nice video photography 👍👍👍

@SoundBlab 3 жыл бұрын

Thank you very much!

@l.b.stringfellow2413 Жыл бұрын

Very nicely done !!

@SoundBlab Жыл бұрын

Thank you very much!

@IanOssher 3 жыл бұрын

Great informative video and really good looking speakers!

@SoundBlab 3 жыл бұрын

Thanks!

@rakitakhan 4 жыл бұрын

I love your designs and the build process. What I really love though, is the fact that you know how to solder. It irritates the hell out of me watching others just melting solder onto a joint and they're attempting to teach others...ugh. Anyway, great video as usual !

@SoundBlab 4 жыл бұрын

Thanks

@chrishoareau974 4 жыл бұрын

Amazing job!

@SoundBlab 4 жыл бұрын

Thanks

@saturnsl21999 Жыл бұрын

They sound outstanding i wish i had a workshop and the knowledge like you i would be building speakers all the time

@SoundBlab Жыл бұрын

Thanks 😊

@stephenyoud6125 Жыл бұрын

Very nicely done and impressive frequency response.

@SoundBlab Жыл бұрын

Thanks!

@gregphillips.1312 6 ай бұрын

Speaker design is something that has always fascinated me. I'm listening through Bluetooth and KZfaq compression, but that sounds nice and tight. Currently using a Lepy 4 channel mini Amp with 2 Pioneer 3 way 6x9's in tight stack layered enclosures, capped at around 80 hz and an Old School 10" SPL Sub in its original enclosure also Filtered at around 80 Hz and bridged over the rear channels. Not massive power but enough out here in my Workshop without annoying the Neighbours.

@SoundBlab 6 ай бұрын

Thanks for sharing!

@JasonLeaman 4 жыл бұрын

Very very nice ! Good work !!

@SoundBlab 4 жыл бұрын

Thanks

@user-xb4nn6ql5l 4 жыл бұрын

This speaker is just beautiful. If it sounds half as good as it looks I’ll be happy. I just bought the build plans which are well beyond my expectations - they are exceptional. Ikea plans pale in comparison.

@SoundBlab 4 жыл бұрын

Thanks! Enjoy the build!

@AthSamaras 3 жыл бұрын

Very clever design, and very good video. Thank you very much...

@SoundBlab 3 жыл бұрын

Thank you too!

@paulvela1369 4 жыл бұрын

Beautiful little speakers

@SoundBlab 4 жыл бұрын

@jbarelds78 4 жыл бұрын

Very nice build! I understand your disclaimer, but the demo at the end sounded awesome using headphones (AT M50x's). I'm working on something similar. The Tangband W5-1138SMF in a 9L BR cabinet, but with the Dayton RS125-8 for mids and the Dayton DC28F for highs. I already built the crossovers, first time I designed my own (using VitruixCad). I did end up using a 2nd order low-pass for the W5-1138-SMF. I'm looking forward to building the cabinets and listening.

@SoundBlab 4 жыл бұрын

Thanks. Cool, sounds like a nice build project. Enjoy and hope they come out great!

@oaantonsen3275 3 жыл бұрын

If these sound anything like they look, then wow!

@SoundBlab 3 жыл бұрын

Thanks

@tedshred8436 7 ай бұрын

Beautiful. very reminiscent of classic audio physic designs.

@SoundBlab 7 ай бұрын

Thanks

@witoldwoznica4612 4 жыл бұрын

really cool , good Job

@SoundBlab 4 жыл бұрын

Thanks

@donalddeorio2237 3 жыл бұрын

Very impressive, though you need quite a few woodworking tools. Really beautiful looking. Good job

@SoundBlab 3 жыл бұрын

Thanks

@Laissez_Faire 3 жыл бұрын

Wow great job 👌

@SoundBlab 3 жыл бұрын

Thank you

@courtneyswaby3178 3 жыл бұрын

Well done great video

@SoundBlab 3 жыл бұрын

Thanks

@mowo5112 4 жыл бұрын

Amazing! Just wow. 👌👌🎼🎹

@SoundBlab 4 жыл бұрын

@kiweekeith 2 жыл бұрын

Wow 'Japie', Baie Mooi 'Jop' .... Sound Absolutely Fantastic .... Very Best to You and Yours from ChCh NZ

@SoundBlab 2 жыл бұрын

Many thanks!

@scottshoemaker9453 4 жыл бұрын

Great look and video

@SoundBlab 4 жыл бұрын

@dwarfywow1955 3 жыл бұрын

Hi, i bought these build plans and just finished in building these fine speakers. The sound is very impressive and of a clearness i ve never heard before. I opted for a white speaker design with chalky varnish and a clear satin cover.

@SoundBlab 3 жыл бұрын

Thats fantastic. So glad you are enjoying them. Please send me some pics!

@mimilt339 Жыл бұрын

Hi , have found your comment just now. did you build it and what is your honest opinion? Greetings from Germany

@user-ei1cw2ul1s Жыл бұрын

Very nice build ! i love the sound ! I

@SoundBlab Жыл бұрын

Thanks

@peterst-uh5me 2 ай бұрын

Amazing job! I wished i would have the skills to do it by myself. I keep on dreaming as of now. Peter

@gainstage4497 4 жыл бұрын

I love this channel!!!

@SoundBlab 4 жыл бұрын

Tx!

@iv4nYap 4 жыл бұрын

Wow... Sounding good even through KZfaq..

@SoundBlab 4 жыл бұрын

Thanks

@viktornedelin9671 4 жыл бұрын

Thank you! 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@SoundBlab 4 жыл бұрын

👍

@jaspermous7514 4 жыл бұрын

Just bought your Build Plans for this project. Can't wait to start. Although it's very comprehensive, I would have liked to see the projected frequency response from the crossover sim and the bass response from the box and a measured frequency response. I know they are on your site, but would have loved to see them in the guide as well. For the rest; keep it up!

@SoundBlab 4 жыл бұрын

Hi Jasper, thanks again for the support! I will try to include these in the future. Hope your build is going well?

@mimilt339 Жыл бұрын

Hi Jasper, have found your comment just now. did you build it and what is your honest opinion? Greetings from Germany

@Gruuvin1 4 жыл бұрын

I was hoping you listen to better music than we had to listen to during the sped up video. You did during the demo. Well done, and thanks for the video!

@SoundBlab 4 жыл бұрын

Thanks. We can't all like the same stuff though. I have a very wide choice in music taste, so I listen to wide selection in genres

@salmanbutt5091 4 жыл бұрын

Superb bro superb grt never knew diy project can be this much beautifull thumbs up bro huge love and repect from lahore pakistan

@SoundBlab 4 жыл бұрын

Thanks 😊

@somakmaitra 4 жыл бұрын

Awesome Sound

@SoundBlab 4 жыл бұрын

Thanks ✌️

@musicconnelly 4 жыл бұрын

Wow, just beautiful little speakers! Great video!!

@SoundBlab 4 жыл бұрын

@JerryWDaviscom 4 жыл бұрын

Wow, sound great.

@SoundBlab 4 жыл бұрын

@alexandermeling9871 4 жыл бұрын

Fantastic!

@SoundBlab 4 жыл бұрын

@tweakerman 3 жыл бұрын

Lovely Job.

@SoundBlab 3 жыл бұрын

Thank you very much!

@honiswagner7674 3 жыл бұрын

You picked nice music content for the video. I see the link to the music site but a list of music used would be epic. The speakers --- Top notch. As stated by others I would love to hear it live.

@SoundBlab 3 жыл бұрын

Thanks man. I'll try to remember to add links in future.

@dncviorel 4 жыл бұрын

I'd be very interested in a 3 way active studio monitors (should sound flat and unflattering). But I'd imagine it's pretty complicated, as it's a different standard in quality.

@lowendgamers5968 4 жыл бұрын

I have used the same plans and the drivers but instead of MDF I have used walnut wood and it really sounds very well and clear

@SoundBlab 4 жыл бұрын

Cool man, send me some photos!

@combare7589 3 жыл бұрын

Nice work👌

@SoundBlab 3 жыл бұрын

Thank you so much 😀

@joeyannece6197 3 жыл бұрын

You sir are a craftsman.

@SoundBlab 3 жыл бұрын

Thanks

@shawnsmakershop2099 2 жыл бұрын

Cool Beans! I'm listening to the demo section on my Snell E.5 MKII's with rear firing tweeters and your speakers sound very nice. They seem to drop off at 36 Hz ! wow..........

@SoundBlab 2 жыл бұрын

Thanks!

@kijkmijnwoning 3 жыл бұрын

Very nice design, next month i will build this speaker...

@SoundBlab 3 жыл бұрын

Great 👍

@LuigiAddario 4 жыл бұрын

Cool Job!.

@SoundBlab 4 жыл бұрын

Thanks

@95lovi Жыл бұрын

Nice build! Just a small tip , use piece’s of excess wood as a clamping shim when gluing. It has the advantage that you don’t eventually have clamping marks on your work piece it protects the edges and you have a better force dispersion on your gluing areas . Especially when gluing bigger areas as by veneering or to compensate the use of less clamp’s. In our workshop we say you can never have enough clamp’s ! 😉

@SoundBlab Жыл бұрын

Thanks! This happens sometimes, but often I don't bother, and have not had many occasions where the clamp made marks, but it is good for spreading the clamp force.

@bpalpha 4 жыл бұрын

Seriously cool homebrew speakers! Live recording sounded excellent through my jbl headphones.

@SoundBlab 4 жыл бұрын

@krzysztofkomor9877 4 жыл бұрын

Nice job.Greetings from Poland.

@SoundBlab 4 жыл бұрын

Thank you very much!

@dominicdiclemente8877 4 жыл бұрын

Great Job. I recently built a set of small bookshelf speakers and used some more exotic non paper backed veneer... what a hassle. I would suggest you take a look at the Titebond branded cold press glue, it was recommended to me as it should have more temperature stability with veneer.

@SoundBlab 4 жыл бұрын

Thanks, I'll check it out.