SOUNDCRAFT UI 24 - MULTITRACK WITH LOGIC SETUP

Рет қаралды 3,811

Күн бұрын

Hey everyone, would you like to know how to setup your UI24 to multitrack with LOGIC? Well I'm gonna show you how to do that...RIGHT NOW...lets go!
If you'd like a copy of my USB Sends schematic, you can find it on my Patreon page.
It's available in the lowest tier subscription.
↳www.patreon.com/posts/grab-co...
----------------------------------------------------------------------------------------------------------------------
Related Videos:
▸SOUNDCRAFT UI 24R - USB DAW CHANNELS EXPLAINED
↳ • SOUNDCRAFT UI 24R - US...
▸Setup your UI24 with Pro Tools - Mac
↳ • SOUNDCRAFT UI 24 - MUL...
▸Setup your UI24 with Pro Tools - PC
↳--coming soon
▸Setup your UI24 with Reaper - MAC
↳ • SOUNDCRAFT UI 24 - MUL...
▸Setup your UI24 with Reaper - PC
↳ • SOUNDCRAFT UI 24 - MUL...
----------------------------------------------------------------------------------------------------------------------
If you need an audio USB cable like the one I used in this video, here is my affiliate link.
▸USB Cable for audio interfaces:
↳ amzn.to/3Hnyurs
----------------------------------------------------------------------------------------------------------------------
► Join this channel to get access to perks:
/ @quickez
----------------------------------------------------------------------------------------------------------------------
► QuicKEZ patreon page:
patreon.com/QuickEZ?...
----------------------------------------------------------------------------------------------------------------------
QuickEZ SOCIALS:
► Instagram◄ / quickeztech
► TikTok ◄ / quickeztech
► Facebook ◄ / quickeztech
► Threads ◄ www.threads.net/@quickeztech
► X ◄ / quickeztech
----------------------------------------------------------------------------------------------------------------------
Equipment used to make QuickEZ videos:
Affiliate links:
▸DJI Osmo Mobile 6 Gimbal
↳ amzn.to/3TPYgfu
▸Encased Magnetic Adapter for DJI OM
↳ amzn.to/3H604cr
▸APPLE iPAD PRO
↳ amzn.to/41JrrTl
▸APPLE iPAD 9TH GENERATION
↳ amzn.to/48iK3Mv
▸USB TO LIGHTING CABLE:
↳ amzn.to/3S6R2RR
▸USB AUDIO INTERFACE CABLE:
↳ amzn.to/3Hnyurs
▸OUTDOOR SHIELDED ETHERNET CAT6
↳ amzn.to/3JrTajm
▸SOUNDCRAFT UI24R MIXER:
↳ amzn.to/3NOEWvK
▸TP-LINK WIFI EXTENDER:
↳ amzn.to/41JbHj7
▸TP-LINK ROUTER
↳ amzn.to/3FM7EsI
▸RODECASTER PRO:
↳ amzn.to/3RPfCXf
▸RODECASTER PRO II:
↳ amzn.to/47n4I0u
▸ATEM MINI
↳ amzn.to/3S9XxEI
▸ATEM MINI PRO
↳ amzn.to/3H7RfPm
▸ATEM MINI PRO ISO
↳ amzn.to/3TOofnf
▸ATEM MINI PRO EXTREME ISO
↳ amzn.to/3RKkxIP
▸ATEM 1 M/E CONSTELLATION
↳ amzn.to/47tGz8l
▸ATEM 2 M/E CONSTELLATION
↳ amzn.to/3TJ0oFG
▸Teleprompter
↳ amzn.to/47pMDz1
▸Wireless Lavalier Microphone
↳ amzn.to/3TNYrHR
▸Behringer X Air XR16
↳ amzn.to/47qIdYx
▸Behringer X-Touch
↳ amzn.to/3HdHDT7
------------------------------------------------------------------
00:00 - CHAPTERS
00:00 - INTRO
00:10 - LOGO ROLL
00:18 - WARNING! AND RECOMMENDATION
01:00 - MOVING AHEAD
01:21 - MIXER SETUP
03:46 - USB SEND WARNING!
05:58 - SENDING AUDIO FROM THE MIXER TO OUR DAW
08:42 - SETUP LOGIC
12:07 - RECORDING OUR MIXER INPUTS
13:25 - PLAYBACK TRACKS TO THE MIXER
14:33 - SIMPLIFIED VIEW
17:21 - OUTRO
17:55 - SUBSCRIBE
18:00 - PATREON

Пікірлер: 17

@peloncano8286 5 ай бұрын

Great video man

@QuickEZ 5 ай бұрын

Thanks! I appreciate you taking the time to watch. Happy Mixing!

@CrisFerrerYT 2 ай бұрын

nice videos man, they really help. Question.. I followed all the necessary settings on my iPad, pro mixer ( the patching and slots settings, ) as well as on my Mac using Audio MIDI Setup and Logic Audio. I can say Soundcraft has now taken control of everything lol. However, since I made these changes, I can no longer hear your voice and had to click on CC to read what you were saying. I even closed and reopened KZfaq, but the issue persisted. My microphone, is connected to channel 6 on my Ui24R = channel 16 on Logic. Speaking into the microphone, I can see the signal coming in on the level meters on both Logic mixer and my iPad mixer. I can hear what Im saying through my QSC speakers which are connected to my Ui24R Master Outputs. but I am not able to hear anything I recorded or your voice on YT. I even plugged in ( Phones mix VOL up ) my Sony Studio headphones to my mixer, and nothing. I'm wondering what I may be doing wrong here. Any idea? Thanks in advance

@QuickEZ 2 ай бұрын

Hey Chris, You caught me right before going offline for the night. Here’s the quick fix… System settings> Sound> Click the output tab and choose whatever you normally use for audio output. I can give you more detailed instructions another time to use playback correctly from your mixer. Drop me a line here: Email@quickez.ca

@santiagobuchelidrums 4 ай бұрын

That was a great video thank you very much! I just have a question as I am seriously considering purchasing this mixer. My main purpose is to use it in the studio to record drums with multiple inputs. How can I be able to hear the click track from Logic and the backing track through headphones from the mixer? Will this have some negative effect in my recording in terms of latency in relation to the click?

@QuickEZ 4 ай бұрын

Hi Santiago, when you setup the interface with Logic, you have to dedicate one of the mixer channel strips to be your click-track coming out of Logic, and then the backing tracks on another channel or set of channels. For instance: - set the click to go out of Logic via output 1, and set the first channel strip in the mixer to receive signal on USB-DAW 1. - set the backing tracks to Logic Outputs 2 & 3 (or choose more channels if you want them to be individually controlled), and set the next two channel strips on the mixer to receive signal on USB-DAW 2 and USB-DAW 3. That would make the click and backing tracks available to anyone using headphones with the Soundcraft. There is inherent latency whenever you are sending signal via USB but it should be small enough that it doesn't cause an issue. Especially because the signal is only making a one-way trip (LOGIC > MIXER > HEADPHONES) it should be very manageable. If it was making a two-way trip (MIXER > LOGIC > MIXER >HEADPHONES) that might problematic since there would be latency in both directions. And keep in mind, that latency would exist regardless of the Mixer you used in this same way. Lowering your buffer settings can help with latency as well. Something else to think about, even with the latency happening in my example above, the drummer would hear everything on the mixer side of things, "in time" and they would be playing along "in time". You can think of it like this: click track > USB LATENCY > MIXER INPUTS > HEADPHONE OUTPUTS Backing tracks > USB LATENCY > MIXER INPUTS > HEADPHONE OUTPUTS DRUM MICROPHONES > MIXER INPUTS > HEADHPONE OUTPUTS Because everything hits the mixer inputs at the same time, regardless of where they started, everything should appear to be perfectly synced. The drum signals going back into Logic might be a few samples out of alignment, but you shouldn't hear that during recording, only during playback. And at that point you could easily line them up after the fact in Logic. I hope that makes sense. Also, I want to point out that many people do report issues with heat using the UI24, especially if they are in a warm environment and have the unit mounted in a rack. I have one of my two units in a rack, running 24 hours a day, 7 days a week and I have never once had issues due to heat. Those that do experience the heat issue, install a small computer fan which is very easy to do, and there are many tutorials on youtube about it. I just wanted to mention that in the interest of being up front and transparent. I love my UI24's, and I've had zero issues with either unit, but that doesn't mean other people feel the same. Thanks for watching and happy mixing!

@santiagobuchelidrums 4 ай бұрын

It all makes sense, thank you so much for your incredibly thorough response! I am really happy that Latency shouldn't be an issue when patched correctly. Just to keep it simple can I patch the stereo out of logic (which I think includes the internal metronome) to a stereo channel ? and just use the mixer as I would do with for example... a Focusrite solo, but instead of having having only 2inputs, having 20 instead. Hope that makes sense. Thank you so much again for your response I really appreciate it!

@QuickEZ 4 ай бұрын

You’re very welcome. And Yes, you can absolutely send the stereo out of logic to a stereo pair of channels on the UI24. Just choose the channel strips you want to use on the mixer, set the inputs to the correct usb daw returns and then link the channel strips so they act like a stereo pair.

@santiagobuchelidrums 4 ай бұрын

🙏🏼 @@QuickEZ

@s_ean233 2 ай бұрын

i’ve a ui24r by this method can i add vst and run it on live church services?

@QuickEZ 2 ай бұрын

Hi. In theory, Yes you could. However, you may experience latency (delay) that is too much for you to work with. You’d need to test this and see if the results are liveable for you. I hope that answer helps. Thanks for watching and happy mixing!

@Dj-xg6eg 2 ай бұрын

Hello, im trying set-up a post mix with LOGIC with the UI 24 and 20 channels to run FOH ? Can you advise ? Thanks

@QuickEZ 2 ай бұрын

Hey DJ, I'm not sure what you're trying to accomplish, or where you're having issues? If you're just trying to have a mix play out of Logic into your mixer to play to FOH along with live instrumentation, do the following: 1. Choose the output channels in LOGIC 2. Choose which two channel strips you'd like to use for LOGIC return on the UI, in a case like this I would use LINE IN L / LINE IN R 3. Highlight the first of your two channel-strips and then click the EDIT button at the top of the window 4. Select the patching tab 5. Select the USB-DAW tab under CHANNEL SOURCE 6. Set the input of that channel to the first of your LOGIC return channels 7. Rename the channel strip if you want to by long-pressing the channel name at the bottom of the strip and choose rename 8. Repeat steps 3-6 for your second channel-strip You now have your mix from LOGIC coming into your Mixer 9. Now use your 20 physical inputs as you normally would If you are trying to do something else, let me know in more detail what is you'd like to do and I'll answer appropriately. Regards, QuickEZ

@domeniconevesnese6011 2 ай бұрын

Doesnt work to me.... any tips?

@QuickEZ 2 ай бұрын

Hi Domenico, what doesn't work? I can't give you any tips without knowing where things are failing for you.

@domeniconevesnese6011 2 ай бұрын

Tks for the answer. Logic recognized the Ui24 as an interface and played the tracks normally. But when I tried to play my bass it didn't work. I used input 1 in the UI and created a track with input 11 in Logic. But there was no sound.

@QuickEZ 2 ай бұрын

ok, thanks for the further info. Do you have Core Audio enable in Logic? Do you have the correct device set as the input both in Audio Midi settings and in Logic itself? Did logic record the signal but you couldn't hear it while you're playing, or Did it not record anything at all? If you followed my steps in the video exactly, without jumping ahead, you should have no problems getting signal back and forth. If you did, and you still don't have signal, then it could be a faulty USB cable. I know that might not seem like the issue if you were able to play tracks from Logic to your mixer, but signal in only 1 direction can be a symptom of a bad cable. I would try another cable and see if it rectifies the issue. Let me know what happens if you do.