Sovol SV-08 All Issues EXPOSED

Рет қаралды 25,937

Күн бұрын

JLC3DP 3D Printing & CNC Service Starts at $1,Get $60 for New Users:
jlc3dp.com/?from=nbr
SOVOL SV-08 : shareasale.com/r.cfm?b=214598...
NOTE: It is not on sale yet. To get early bird pricing under $500, bookmark this link and check back at launch time. Early bird pricing is limited to the first 1500 units sold.
Launch Time is 12pm, April 18(EST Time)/6pm
Today's Watch:
amzn.to/3Jourfi
My Links:
My Store: nathansellsrobots.com
Patreon: / nathanbuildsrobots
Discord Channel: / discord
The links in this description may be affiliate or tracking links. I may earn a commission on sales made through these links.
Intro: 0:00
Build: 0:59
Inspection: 8:16
Power On: 11:22
Sponsor: 13:13
Print: 13:36
Speed Benchy: 18:03
Conclusion: 19:52
Sovol SV-08
Bambu Lab A1 P1P P1S X1C
Creality Edner 3 K1 K2

Пікірлер: 150

@portela237 Ай бұрын

Nathan, if you keep having this problem of companies sending printers you didn't ask for and didn't want, I'm willing to help you out with that. You can ship them to me, I won't even charge you a storage fee. Thanks for the video. Another great review.

@SirLANsalot Ай бұрын

LOL I think we all would just say, "Ya I'll totally just "store" that printer for you" ROFLOL.

@atnfn Ай бұрын

Couple of years later your house is full of 3d printers like a hoarder house and they just keep coming.

@dasklebeband 25 күн бұрын

I would take them as well! In case you got some doubled up or so 😜😂

@GTRSpecialties Ай бұрын

Everyone going on about the $2 donation being sad, please show me the donations to the project from LDO, Fabreeko, Siboor etc. They make tons of money producing kits from the Voron BOM and others are making lots of money offering upgrades and machined parts. None of them are donating to the project either, just taking and making money and no one blinks an eye. At least Sovol is which puts them miles ahead of every other company making money off the project.

@SP4RT4N14 Ай бұрын

There's a big difference between selling a kit based on a bill of materials from an open source project and creating a complete printer straight from it and using their branding. I'm not saying Sovol is wrong, they are well within their rights to use the open source project to make and selll a printer but they have intentionally tried to imply/tie their name to Voron without Voron's consent. They aren't marketing it as a great corexy printer, they are marketing it as Voron but cheaper. Again, they can do it, but the way they are going about it is questionable. If you look at the Troodon, (which is way closer to a Voron clone) they only mention that it was inspired by Voron. Also to add, giving $2 (which is basically nothing compared to the price) to cash in on someone else's branding is not great. Thats why people are upset.

@ldomotorsjason3488 Ай бұрын

We can't speak for other companies, but LDO is doing monthly donate to Voron since we start ship Voron kits to our resellers. I believe some of LDO reseller is doing that too. But make sure it is not royalty fees, it is donate, to support Voron team (non-profit group) to do more R&D for this community.

@hassosigbjoernson5738 Ай бұрын

... and don't forget the donations from Bambu Lab to Voron, Klipper, Prusa and the people who brought things like Input Shaping to open source. They used it, they copied it, they didn't tell and made their printers closed source ... so they "donated" nothing back, not even a big shout-out in their slicer, software or on their printer screens.

@GTRSpecialties Ай бұрын

@@ldomotorsjason3488 Thank you very much for responding!! Honestly you have my respect for doing that and next time I look to build a Voron it will come from you guys.

@GTRSpecialties Ай бұрын

@@hassosigbjoernson5738 and thats why I will never own a bambu.

@viziteuliviu6962 Ай бұрын

Awesome video man, thank you 🙏

@sirrodneyffing1 Ай бұрын

I always feel like I have to hide behind the sofa to watch your reviews; so brutally honest. Thanks for what you do.👍

@VacFink Ай бұрын

Its like the fable of the old woman who found a frozen snake in the wood pile and nurses it back to health, only to be bitten. A snake is a snake and will bite you if you let it in. The fact that they still send them is pure joy, because you KNOW there's gonna be a bite!

@Enjoymentboy Ай бұрын

I find it rather interesting watching multiple reviews of the same product and how everyone has different things they find good, needs work or just unacceptable. It's why I refuse to listen to any one person. Personally I have very different standards than other people. Most of the things I hear reviewers complain about are meaningless to me .. things such as the fan noise or appearance. The fans don't bother me in the least and they just become background noise I can tune out without any problem. As for appearance, I find it absurd to put in even so much as a single second thinking about how it looks. It's a tool for me and no different than a hammer. I don't care what a hammer looks like as long as I can knock nails in with it. I'll just put all the reviews into a bucket and lump them together. Then I'll wait for sovol to knock out a few changes and buy one after all the first adopters (ie suckers) buy one.

@NathanBuildsRobots Ай бұрын

haha, "buy one after all the first adopters (ie suckers) buy one"

@planckstudios Ай бұрын

Stoked to see the upcoming vid about your new machine! Maybe cause it's so open, that sovol feels super quick. and ya - fan noise. All the other sounds aren't too bad - in general, I like the direction. If this thing sells, we could see a pro version w/ metal replacing the plastic

@DudeStrange Ай бұрын

Question: What are the outermost dimensions of this model? i can't find the information on the product page

@free6210 Ай бұрын

15:20, What is that shipping estimate

@AndrewAHayes Ай бұрын

I liked it when Sovol took the Creality designs and improved upon them and more importantly they fixed them! and sold them for less money, I held a torch for Sovol back in those days. I am beyond having to adjust Z offsets and would have thought a new manufactured Voron printer would have true auto levelling (tramming, before someone corrects me), it would have been nice to have had something on the uprights to attach enclosure panels to, drilling might not be an option as the linear rails are mounted on the backside of the uprights

@trevor1995jason Ай бұрын

It does have true auto tramming, that’s what QGL does, it also has auto bed leveling. So the exact same features as the actual voron v2.4 unless you decide to put voron tap on the 2.4 you’ll always have to adjust z height to some degree (which because it’s supposed to be open source I’m sure someone will make a mount for voron tap and a stealth burner tool head for the sv08) Also sovol announced they’re making a panel kit to enclose this printer. Sovol took what would cost easily 1200-1500$ as a voron v2.4 and mass produced to sell at almost half the price. So it’s the exact same thing they did to Creality and just doing it with an open source project. (I totally agree that 2$ per 600$ printer donated to the voron team is ridiculous though)

@joescalon541 Ай бұрын

It has auto Z offset, it just wasn’t shown in the video. The main issue is Sovol Klipper macros aren’t fully complete, much like the sv07. It has a metal load cell and wiper at the back for z offset calibration. Hopefully a day on printer.cfg update for all the new to Klipper people.

@ThisisDD Ай бұрын

One nice thing is that the community can make up for a lot of these issues. It shouldn't be that way, but making it open helps at least.

@henrymetzger9951 21 күн бұрын

I just want to know if this is enclosed if I could print full sized helmets and chestplates in abs, or motorcycle fairings.

@NathanBuildsRobots 21 күн бұрын

Possibly, but I’d wait until someone does some testing running it enclosed. There’s no reason it shouldn’t be able to handle ABS and ASA but letting someone else do the experiments is always a wise move

@Barbasnoo Ай бұрын

The eye contact with the camera while you were checking belt tension gave me the heebie jeebies.

@monkeywrench1951 Ай бұрын

IS it the third or fourth wall ? Pretty cinematic :).

@Milkex Ай бұрын

oh my god, an actual review?! daaang, you have my gratitude

@astrumrocket6556 Ай бұрын

Shame this printer isn't all cooked yet, I was looking forward to seeing how it turns out... On an unrelated note, any chance you'll review Infimech TX ? It's a new printer form a sister (I guess? ) company of FlyingBear, I remember you kind of liked FlyingBear printer, and this one seems to use some similar parts. I'm finding it very interesting, but there are pretty much no reviews of it.

@exaltdragon Ай бұрын

Nero found that one of the pulley shaft holes was completely misaligned in the gantry blue injection molded parts, causing the belt to grind very severely. Was yours okay in that aspect?

@Milkex Ай бұрын

it was just a short pin. he updated us on the situation later

@exaltdragon Ай бұрын

@@Milkex thanks for the update. I don't usually read the community section so I didn't see that.

@pedrohenriqueboscofi Ай бұрын

I kinda love milk crates...

@Milkex Ай бұрын

my wife and I used to have a bed frame made of a bunch of milk crates. it sucked! but the storage capabilities were amaaaazing.

@meocats 23 күн бұрын

will the sovol mk8 nozzles work on the sv08?

@alphageneration1796 Ай бұрын

so will it be possible to enclose this printer build in a filter system and an active heating element and print higher demanding materials. some even say, you can't print tpu on it, but if it's possible to do all of the above and print most materials, it would make a creality k2 plus contestant to me. leaks say the k2 plus with cms will be around 1.1k, maybe 1k a few weeks later (in creality style), if the sv08 is less than 600$, there would be some room left for buying an enclosure, filter system, heating element and MMU (granted Sovol releases a good one) I would really like to know if your mashine had problem with printing TPU and bend pully axies really nice first impressions video, love to see reviewers actually showing their unfilltered experience ^^

@warmygreenfields 22 күн бұрын

Sovol also donated 1mil$ upfront (to the Voron team), they should brag more about it.

@FunctionalPrintFriday Ай бұрын

Now commenting!!! Nice work as always. Will be interesting to see if the frame "creeps" over time since it's all just injection molded.

@NathanBuildsRobots Ай бұрын

It's likely not an issue for an open frame printer. When it gets enclosed and/or with a chamber heater, we might see some issues crop up

@eriklundqvist4221 Ай бұрын

I just come here for the drop testing

@blaze_toast Ай бұрын

Nathan cooking like always

@3dpathfinder Ай бұрын

I ordered mine today but did not get the early price, ordered it with enclosure.

@anon-means-anon Ай бұрын

Drop tested and everything. I come here because Nathan is one of the few people that do reviews instead of sales pitches. The whole youtube tech review situation is absolutely broken.

@suzyamerica4679 Ай бұрын

Bingo. 1 - "this thing is great" 2 - "It's better than [fill in the competitor]" 3 - here's my affiliate link

@ptitbass Ай бұрын

Not sure if i understood well but you mentionned in the video there a kind of induction probe (nozzle) but from recents news it seem to be a pressure probe similar to the prusa mk4.

@Interspieder Ай бұрын

The main probe at the print head is inductive, there is also a pressure knob outside the print bed to calibrate the z-offset of the nozzle.

@TheOneAndOnlySatan Ай бұрын

Thanks for again a REAL REVIEW, reviews arent sale pitches they are meant to be critical to give people that consider it a fair and square look at it. Shil next layer could learn allot !

@hihellothere9569 Ай бұрын

Womp womp

@MTNDEWGANG Ай бұрын

Next layer is a sellout

@jakobhansen1396 Ай бұрын

@@MTNDEWGANGbut he's admitting it. Not that Nathan is a sell out at all

@psxtuneservice Ай бұрын

You can make lots of money by being a sellout....

@user-iy5sn2cx5g Ай бұрын

@@psxtuneservice sadly lol

@monsterstorm78 Ай бұрын

U still have the sv07 or sv07 plus

@garrettnelson8469 Ай бұрын

Nice. I pre-ordered one as soon as they opened that up.

@NathanBuildsRobots Ай бұрын

Did you get the $450 price then? They accidentally left a $50 coupon on their website 😂

@garrettnelson8469 Ай бұрын

@@NathanBuildsRobots yes I did. I was on the fence about ordering but I couldn't pass up that price.

@billverine765 Ай бұрын

Glad to see they are donating $2 per printer to the Voron project. Another good and honest review Nathan, I appreciate your honesty and no nonsense style.

@veryconfusing Ай бұрын

Awesome review - I really wish someone would post the exact dimensions of the base or the whole machine as assembled ! ( of course it's "close" to a voron but . . ) I'd love to know the footprint of the base and the height !

@J0stik Ай бұрын

looking forward to look at this printer in one month, two months and six months after release .... now it looks as a decent platform for 350 mm and less than 600 USD, but i think it will be a great one when 3d printing community starts improving / modding it.

@BradClarke Ай бұрын

I like my SV06 and SV06 Plus. Might be tempted on this, but that fan would have to be replaced.

@Liberty4Ever Ай бұрын

I was expecting a large format Klipper bed slinger, but I like Sovol's Voron 2.4 For The Rest Of Us approach. I'm guessing the extruder is completely proprietary even though the angular appearance has a StealthBurner vibe to it? I guess there are pros and cons either way but I'd like the ability to swap to a third party or open source extruder.

@HopeThisWorks Ай бұрын

From another Nathan, who builds robots, thanks for the first impressions of the SV08

@olafmarzocchi6194 Ай бұрын

The staircase effect on the top sides of the hull is EXTREMELY rounded, indicating excessive acceleration for the given stiffness of frame/assembly. It would be interesting to print the Klipper "acceleration tower" which shows the widening of the gap, to judge which acceleration the printer can handle without excessive smoothing. In fact, it's a good test to compare printers besides the maximum marketed acceleration.

@NathanBuildsRobots Ай бұрын

But it said here it can do ten bajillion meters per seconds

@olafmarzocchi6194 Ай бұрын

@@NathanBuildsRobots then it's sold! But still, comparing all your printers using that tower could be extremely interesting. I would do it myself if I had more than one, not even functioning, printer!

@MrDonXX Ай бұрын

Great Review but not impressed with the final result of the last benchy. Not sure what this unit is going for price wise but if you have to add something more to a 3D printer after you put it together to make it work better I have an issue with that. having been into 3D printers since 2015 I'm done with modding to make manufacturers product work like they should have.

@joescalon541 Ай бұрын

It’s

@user-iy5sn2cx5g Ай бұрын

sovol did a good job except for the proprietary nozzle, everything's getting more and more proprietary.

@NathanBuildsRobots Ай бұрын

It's "inspired" from a design that is being sold on aliexpress. The pros of it not being completely original is that you can probably buy some spares from day 1.

@dbtest117 Ай бұрын

Yeah I have never understood that print surface it doesn't stick.

@alanb76 Ай бұрын

looks like a single sided steel surface, lowers cost especially on a 350 size bed.

@Brandon-jf9cv Ай бұрын

17:55 shivering skeleton Na, Mr. Krabs was walking behind the camera

@Liberty4Ever Ай бұрын

I can definitely see me buying an SV08, fully enclosing it, and feeding it from a bearing spindle reel holder mounted above (TPU) and pitching the reverse Bowden tube and side mounted spool holder. For a $500 printer, I'm surprised the SV08 has such a low tech throwback display and user interface. Then again, for a Klipper machine that I manage via a Fluidd tab in my web browser, I wouldn't care if the printer's user interface is simple to save some money.

@Orangeking05 Ай бұрын

the creality glazer himself

@sniperpronerfmods9811 Ай бұрын

KEEP UP THIS SOLID STYLE OF CONTENT BRO... truth is epic lol

@ImSoMagic Ай бұрын

SOVOL SV-03C KE V2 PLUS SE MAX hahahaha I hope not, it already a pain to look for information for the Ender 3 V3 before you only find info on the SE or KE. Company should always use the same length for the naming to be consistant and help the users find info online.

@BloodSteyn Ай бұрын

At least the HDMI worked after the initial power cycle.

@OnionCrab 29 күн бұрын

My man looking jacked 💪💪💪

@MrWaalkman 26 күн бұрын

Welcome to -Nathan- Uncle Jesse Builds Robots!

@3D_Printing Ай бұрын

18:33 "A Little bit," LOL

@denisoriordan6739 Ай бұрын

You should ask Guy if he ever uses 3-2-1 blocks in his shop. 😂 Perfect First Layer.

@rarbiart Ай бұрын

really hope this one will be fully cooked during product live cycle. SV07/SV07+ never got PETG profiles from Sovol, they are still offering no profiles, but an outdated cura fork with PLA only.

@suzyamerica4679 Ай бұрын

GerGO 3D print had a video on installing Christian Vick's profiles for different materials and nozzles .. that's what I've been using, with some mods to the cooling settings because I designed a whole diff parts cooling system.

@rarbiart Ай бұрын

@@suzyamerica4679 I did the same, thanks to GerGo3D's video. But honestly: that is the work around. I hope your argument is not "Sovol does not need to provide profiles for SV07 PETG+TPU, because people can find it on youtube and reddit" (in this case sovol should at least link and credit those solutions by 3rd parties.)

@suzyamerica4679 Ай бұрын

@@rarbiart Oh no, I was not going to defend Sovol. Hell, they advertise all the different filaments their machine can handle. It was only a minor inconvenience to look for them. On the Sovol forums for the SV07 there is a thread about prints getting knocked off the bed by the head .. that is where I learned about the parts cooling deficiencies and ended up designing a better traveling parts cooler. It's really ugly but works .. it's up on Printables as a dual 5015 cooler for that printer. Turns out the curtain fan caused a bunch of problems if you pushed the machine for larger prints or multiples spread across the bed.

@rarbiart Ай бұрын

@@suzyamerica4679 Sovol could have made a pull request at the orca slicer git hub for the missing material profiles. or they could have done the same at the cura git hub, if they do prefer cura. But they basically left the profiles/slicer as yanked out for the "early bird" buyers. And that's SV07plus more than a year on the market now and not discontinued AFAIK.

@allenpaley Ай бұрын

@5:09 So far it sounds like a real Voron!

@RBallarddesigns Ай бұрын

Nathan you are the definitive source for 3D Printing news. I saw another “review” and they were talking about the injection mounded parts on the gantry being not great which was causing the belt pulley to be crooked. Possibly the pins were too short? Could you check yours out and see how it looks?

@Dimitris1963 Ай бұрын

This or Troodon 2.0 Pro?

@Mintor94 Ай бұрын

I'd go with Troodon as it'll be compatible with more mods made straight for Voron, The Pro version also has better screen and Tap probing

@Dimitris1963 Ай бұрын

@@Mintor94 I think so too!

@1fareast14 Ай бұрын

conclusion after a single benchy... Have a look at DIY PERSPECTIVE, thats a proper review. I get that the machine is new and you weren't super jazzed on it, but I think a little more could be done especially with that title

@marc_frank Ай бұрын

not that bad isn't it? but the troodon 2.0 is better costs a bit more, though can you have a look at that one, too?

@Dimitris1963 Ай бұрын

I think so too! Troodon 2.0 Pro costs a little more but has an enclosure, no plastic parts in critical places but entirely made of metal, extruder and nozzle that are already prepared for all filaments, Stealthburner, Klipper etc. I also believe that the SV08 will not be cheaper if you can order all “features/updates” from Sovol (e.g. housing, etc.)!

@marc_frank Ай бұрын

@@Dimitris1963 that's a good point, "necessary" upgrades will bring up the price of the SV08 to a similar level

@joescalon541 Ай бұрын

Can buy two sv08s for price of troodon 2.0. I would hope it is better.

@Interspieder Ай бұрын

@@Dimitris1963 A "little more"? I couldnt find a Troodon below 900$, could you direct me to a Troodon that costs around 600 $ please? Thanks.

@Dimitris1963 Ай бұрын

@@Interspieder I assume that the regular price will be around 600, plus then approx. 150 for enlosure? That's what my "little more" referred to! At the moment you can't compare the two in terms of price. Come back when the enclosure (as an extra) for the SV08 is there, we will then add up the (two) prices after the "early bird" period, compare the SV08 plastic parts against the Troodon metal parts and both hotends, real reviews and only then maybe you can answer your question yourself. Feel free to buy what you want, but that doesn't make it better, if the only argument is "just cheaper", in the truest sense of the word! For clarity: I am neither representative of one or the other, I'm just trying to find out the best value for my money!

@cheo7811 Ай бұрын

Just a constructive comment for next time. The printer base is black, you are wearing a black shirt and the lighting in the room is rather poor (or too soft) It was like watching a horror movie, I was waiting for a moster to come in frame at any moment. :)

@matroosoft4589 Ай бұрын

My takeway is, get the SV06 if you want a cheap and very reliable bedslinger that prints perfect out of the box Buy an SV08 if you like to tinker and mod. Don't buy any of the other Sovols, they suck.

@ESF19791111 Күн бұрын

INTERESTING :) THANK YOU FOR SHARING :) THANK YOU FROM ISRAEL :)

@TheRIkkyP Ай бұрын

This was a really exciting printer until I actually saw it working. I’m sure in a year once the community has modded it into oblivion and any that exist in the wild are basically Vorons it might be a decent printer but for now it’s a hard pass.

@kharmastreams8319 17 күн бұрын

This is not a clone though...

@luistiago5121 Ай бұрын

Good result? come on...

@CapacitorCapacity Ай бұрын

Did you see that the second benchy was.. a second benchy? Not the first?

@NathanBuildsRobots Ай бұрын

Idk if I mentioned it but the 2nd benchy was after cleaning the bed. The first one came loose because of 2 issues: 1 - The auto z-offset needs some tuning, I think a fix has been developed for this. 2 - I set the fasteners down on the middle of the print area, which deposited some machine oil onto the PEI sheet. This really affects bed adhesion, so by wiping it down with alcohol it effectively fixed it.

@supremesupreme4289 Ай бұрын

Printer companies need to pick there influencers better.

@NathanBuildsRobots Ай бұрын

Yeah we need more infomercial style pitches

@matthiasmartin1975 Ай бұрын

How awesome would it be if you were to start your videos being dressed up as a mongolian warrior on horseback with the 3D-Printer strapped to the saddle and then you would proceed to drag it into your yurt where you would then film the review. You could also spice it up with pronouncements about what is best in life and what not. Don't hold back, go crazy! Anyway..., I might just be dehydrated or something. But yurts are great, are they not?

@NathanBuildsRobots Ай бұрын

I need a horse

@dekurvajo Ай бұрын

Those plastic parts are just dumb. I mean off course if you build a Voron by yourself plastic is your almost only option using a 3D printer. But when you start 1000's of 'em, plastic would be your last and worse choice. Even casted aluminium alloy parts would have been a better solution there.

@HybridRobotix Ай бұрын

In my opinion, you are doing a disservice to the printer you are reviewing by comparing it with another printer, particularly in this case. Please review each printer based only on its own pros and cons. Please keep all assumptions out of reviews. Your observations are OK, but assumptions are not.

@suzyamerica4679 Ай бұрын

A question for anyone - what is the procedure for changing filaments on this machine? Is it the usual thing of undoing the feed tube at the top of the hotend, clipping the filament, extruding the remainder, and threading the new filament through? TIA

@MrBaskins2010 Ай бұрын

thank you for an honest review. some reviewers are just ring kissing with zionist easter eggs in the background

@downsyndromebear Ай бұрын

I actually laughed out loud at this comment. I shared the same thoughts when I watched that video.

@raisedbyninjas_ Ай бұрын

Is their site broken? I'm seeing a price of $9,999 for the SV08.

@NathanBuildsRobots Ай бұрын

It goes on sale tomorrow

@tomwest1748 Ай бұрын

"I didn't ask for it, or want it"...... Well without it you wouldn't be making this video, which wouldn't in turn be making you a wage! So maybe a little less of the "it's beneath me" attitude next time when someone asks you to review something 😬😬😬😬

@NathanBuildsRobots Ай бұрын

Ok boss! 👨‍🔧

@VacFink Ай бұрын

or...he could be making an interesting video about something else. Sadly too many 3D printing channels become less and less about actual projects and more and more about reviewing an endless onslaught of nearly identical machines. The disdain is appropriate and appreciated in my mind.

@baretlyon2601 Ай бұрын

THE SITE SAYS $10K??? WTF

@CapacitorCapacity Ай бұрын

They always put 10k, the price updates when the printer releases tomorrow.

@shodanxx Ай бұрын

Way better than the thiefs at creality and anycubic *spits*

@SmashingBricksAU Ай бұрын

Why would you buy this over a Bambu, genuine question. My bambu was set up in 15 minutes and hasn't missed a beat.

@NathanBuildsRobots Ай бұрын

Cheaper bigger faster open source

@petermarkk1408 Ай бұрын

Sovol cloned not the Voron! They cloned the clone…..the Troodon!

@nixxon6261 Ай бұрын

$10k for this printer? No thanks. Good review as always!

@kyky7kyle7 Ай бұрын

wow it was under $500??? Its $10k now and sold out :'(((((((

@Modidasti Ай бұрын

I dont think the price on the website was real

@IkarimTheCreature Ай бұрын

$10k is the "go away" price

@downsyndromebear Ай бұрын

It is just a place holder, the printer has not been released yet.

@enhidri160 Ай бұрын

Placeholder price for some dumb reason

@simplegamerz9485 Ай бұрын

Man 15 sec and no views hahaha

@Vinz3ntR Ай бұрын

I really don't like this machine.

@NathanBuildsRobots Ай бұрын

Care to elaborate?

@nigel5823 Ай бұрын

it price here in the UK $9,999,00 thats way to much for that printer

@Dalroth Ай бұрын

That's not the real price. It's just not up for sale yet. Why they do that instead of just saying when it will be available is beyond me. Marketing garbage.

@enhidri160 Ай бұрын

Placeholder price

@lajoyalobos2009 Ай бұрын

Same in the US, $9,999 or €9,999 in the EU. Just a placeholder price for now before sales go live.

@jakefromstatefarm8545 Ай бұрын

Let’s design a hot end where you can’t see the first layer. Great idea.

@suzyamerica4679 Ай бұрын

The SV07+ is fantastic for that, which is why I took off the hot end cover, the lights, the parts cooling fan, and made a whole new parts cooling system.