Airbrush Asylum I custom paint shoes. Do yo think the Mutant Crystal would give the same effect on acrylic paint?

YES!

Where did you buy the crystallizer product?

Wat is the name of that chemical applie before the colour red...

I want crystal spray

Do you know if this would work on waterbased acrylic paint?

Yes, that is true. very easy to make mutant crystal liquid with low cost 😊

@@RonGotSole Water-based paint will dilute when you apply the formula, I don't know if it works, but if you test it, let me know the result.

Any soap? Like dish soap?

What is the purpose of the soap?

Yes, it most certainly is ...glad you liked it 👍🏻

Thanks for sharing great tip 👍🏻👍🏻

I concur, just boil it in half and add some drops of ox bile/dish soap ;-)😜

allow the part to cure 30 min at 20 c use a hair dryer on low to be sure its fully dry and use warm to hot water and use your hand to remove the mask effect

I haven’t tried it on anything large🤔 , but I think with any effect it works best as a small feature or as a background for artwork etc 👍🏻

Thank you 🙏🏻

Thanks it’s awesome stuff and I think I’m going to have to airbrush over it 👍🏻🤔

You could add a mini flake into an intercoat clear and try that or better yet do the flake first and then experiment with doing the crystal over that then candy 😉🤘🏻

30 min

Yes you can mask a section and then crystallize, just make sure it’s a vinyl or fine line tape on the edge as otherwise it may deep through ? As you are applying the crystals heavily with a cloth 👍🏻

Thank you 🙏🏻

Great question, I assume it would however you will need to prime it and then base it up 👍🏻👍🏻 check with dna paints before you buy they are very helpful 🤩

Yep it sure does 👍🏻👍🏻😉

Thank you 🙏🏻

Cheers 👍🏻

It happens fairly fast , I think from memory it was raining the day I filmed this so prob around 20oC or just under 👍🏻

That sux...it generally works really well on all hard surfaces if you want more technical info then I would reach out to DNA paints direct via - dna-paints.com

Thats awesome, shame it didn't come out as effective but thanks for sharing...appreciate the comment

@@AirbrushAsylum Hi I hope you are very well your videos are very helpful * I have some doubts and I would like your help: 1) what type of silver in spray can you recommend that it be of very good quality and can achieve the same effect? 2) When you apply your candy red over the silver, do you put some kind of sanding sealer clear on top of that, to protect your marble effect, before applying your 2K Polyurethane final clear coat? 3) Does the silver paint have a clear coat on it before applying the crystallizer? or is it just the painting. I look forward to your prompt response you are the best thank you very much

That can work apply each coat lightly

Thank you and yes it’s super cool, I would recommend using a ‘build clear’ so it can be sanded smooth and then you can paint over it 👍🏻

Airbrush Asylum : perfect il be using this on a project im working on now keep these vids coming mate bin painting from 2k gun, spray can all way to airbrush for about 8 years and still u came with information iv never seen before lol guess i need to start getting back to researching not just using one shop lol thanks again man and keep up these videos

Thanks glad you liked it 👍🏻

Thank you 🙏🏻

Works on solvent based, works on all DNA products. havent tested on waterbased, please check the data sheet. dna-paints.com/wp-content/uploads/Mutant-CrystalZ-TDS-V1.5.pdf

You can purchase direct from DNA paints using the following (affiliate link, meaning we receive a small commission for any qualifying sales) - www.dna-paints.com/trident/?a=873

this is painted on an aluminium composite panel.

Get in touch with DNA paints as I believe they have a distributor in Europe 👍🏻🤞🏻

You can definitely play around with it by adjusting the level of crystalz applied, the direction of how you apply it, it all just comes down to experimentation.

Thanks for the comment never heard of that brand , but I’m sure there are a few similar products ?

kzfaq.info/get/bejne/htGha72fmsWbZqc.html

@@cococouch I support all art / paint hacks that save money if your on a budget, but i wouldn't use that for a commission piece!

As far as I know using the dish cloth is the best method , not sure if it can be sprayed 🤔

You can spray products like this using spray bottles or those spray paint systems that employ a jar and your own paint with an aerosol can of propellant (cant remember the name, sorry). Brushes and rollers can be employed as well. All will give different results, and the technique, direction of movement, and application method all effect size and direction of crystal growth. It's important to experiment on multiple surfaces before applying to the final surface because even the topography of the surface your painting effects the crystals. For instance I was doing a job and the crystals emphasized the edge of a surface on one side but not the other and it ultimately looked disjointed. I opted to repaint. Sanding direction changes crystal direction growth immensely and can be used to manipulate how they grow. You can get interesting effects by wetting some areas before others, or by varying the volume applied in different areas. I often use an old hairspray bottle to apply these crystal products because it provides an even and very thin mist while still being easy to use and disposable and capable of wetting a relatively large area rapidly Note.... my experiences were with a similar product but a different brand. Best advice is to experiment. Get a bottle and waste it just playing around.

One additional note... if you attempt to spray, make sure you use a larger opening, not an airbrush, I wouldn't use anything smaller than 1.6

It's designed to be applied with a rag. dna-paints.com/wp-content/uploads/Mutant-CrystalZ-TDS-V1.5.pdf

Candy is best, you will bury the effect with flip paint

Thank you 🙏🏻

lol...thats great

Yes great idea , it can be manipulated depending on how it is applied so I think I need to play around with it more 🤔👍🏻

@@AirbrushAsylum i think about silver background and then cler cote, after scratching by 240sandingpaper use Black Ink with water 🤔