Special way to sharpen pruning shears as sharp as a Razor

Рет қаралды 947,153

2 ай бұрын

Special way to sharpen pruning shears as sharp as a Razor
Tips lntelligent #diy #diyprojects #inventions #Sharpen #scissors #sharpening

Пікірлер: 251

@user-ih5zr2hx8i 2 ай бұрын

Ужас. ......ужас..... столько затрат..времени, трудов, средств. А новые ножницы стоят 5. - евро. По истине, если собаке делать нечего......

@tipsintelligent2605 2 ай бұрын

Thanks bro

@jaqian 2 ай бұрын

Decent ones cost around €20. Better to maintain them than throw them away

@user-ih5zr2hx8i 2 ай бұрын

Смотря как относишься к потраченному времени относительно конкретно данной цели , восстановить ножницы. Время не вернёшь, не купишь...

@zoltankozma6312 2 ай бұрын

Vccbmĺķķ8

@integr8er66 2 ай бұрын

@@user-ih5zr2hx8i It's true, you can't buy time, but conversely if you have limited money and not the ability to earn high wages, then this short expenditure of time may cost less than a new set of shears.

@thecasemaker8999 2 ай бұрын

There is a very handy tool called a Dremel. Even has a rounded emery wheel and polishing paste in the kit. Nice job, but that is a lot of work when a $40 tool that will also do a multitude of other tasks can do it much quicker.

@tipsintelligent2605 2 ай бұрын

ok man

@alancochran5275 Ай бұрын

That's one sharp bikini trimmer!

@mikeroth5518 Ай бұрын

Or if you have a real shop with tools, a reciprocating spindle sander. They spend 1 minute of a 6 minute video cobbling together a sander that isn't as stable and doesn't work as well.

@georgebenevides 10 күн бұрын

@@mikeroth5518 I'm in the Nursery business, 25 years. I keep cleaning my secateurs when not busy. I use sandpaper, cleans off sticky residue and sharpens.

@christopherwheeler688 Күн бұрын

What if you don't have $40 to spare? This is long-winded but worked with what the guy had to hand.

@denisripley8699 2 ай бұрын

Make sure you clean your wife's toothbrush and put it back exactly as you found it.

@d.k.1394 2 ай бұрын

Lol

@nothankyou5524 2 ай бұрын

No problem here. She's using yours in place of toilet paper.

@sunriseboy4837 Ай бұрын

LMAO.

@lawrenceling2901 10 күн бұрын

That's a long winded way to sharpen a blade

@gregmeagher889 2 ай бұрын

I grabbed some toothpaste and the wife's toothbrush and this worked great!

@danstrayer111 2 ай бұрын

have you heard from her lawyer yet?

@tipsintelligent2605 2 ай бұрын

Thanks bro

@gerardobarrera9213 2 ай бұрын

And then you wife tried to kill you bro?

@PerroSucio 2 ай бұрын

It’s sad the world has lost its sense of humour……☹️

@nothankyou5524 2 ай бұрын

And she grabbed yours and gave up toilet paper. Win-Win.

@stevieb6173 2 ай бұрын

great but what is the point if you dont give us a list of what you used !

@artmcteagle 2 ай бұрын

Folks, just disassemble secateurs, sharpen 5 min on an oil stone/water stone, reassemble, good to go. [Use a bit of fine steel wool and some WD-40, if you need to clean off some gunk]

@christopherwheeler688 Күн бұрын

Do you actually need a list? It's perfectly self-explanantory.

@nothankyou5524 14 минут бұрын

You don't know what he's using? Best you don't try this.

@normanmazlin6741 2 ай бұрын

Skip the first steps and sharpen with an oilstone.

@rodjohnson2632 2 ай бұрын

Yeah, this was a pretty ridiculous, long way of doing something that can be done better and faster the old-fashioned way.

@David0lyle 2 ай бұрын

Might depend on how far gone they are. Removing the gross notches uses up a lot of the oil stones surface. Good stones are expensive but sand paper is a few cents.

@DELAWAREBOWHUNTER Ай бұрын

What part of her body did you do it on?

@ShipperChick Ай бұрын

Considering that they are meant to prune small bushes and thin branches, I wouldn’t expect them to be able to cut rubber tubing. 🤷🏼‍♀️

@greysheeum 2 ай бұрын

Sharpen things using the Rube Goldberg method.

@tipsintelligent2605 2 ай бұрын

Ok man

@herberar 2 ай бұрын

Excellent. My problem is with my wife. She uses them,never cleans or lubricate and let them sit somewhere under the rain😢

@tipsintelligent2605 2 ай бұрын

Thank you for supporting the channel

@user-sl3il5sz2s 2 ай бұрын

Another civilization, Russia, but my wife and I have the same problem. I even agree that it is my responsibility to put them in order, but for this it is necessary that she does not lose them somewhere in the garden. And then there are these little rakes and garden trowels.

@bungee7503 2 ай бұрын

Are we married to the same woman?

@julienchauvet4142 2 ай бұрын

Change your wife...

@choltzapple 2 ай бұрын

What a way to find out I'm in a polygamous relationship.

@johnduffy6546 Ай бұрын

Loved the McGiver throttle lock!

@tipsintelligent2605 Ай бұрын

Thanks bro

@highrx Ай бұрын

4 out 5 dentists approved of this video.

@tonymarkey6525 2 ай бұрын

You only need the oilstone not all the other theatre. 🙄

@LShapedAmbush 2 ай бұрын

The problem with letting mimes make KZfaq videos is they can't explain the details, like: Do you try to maintain the original bevel? What is that clear liquid - water? What grit emery paper? Is that superglue?

@tipsintelligent2605 2 ай бұрын

Ok man

@besthubiever 2 ай бұрын

Dear Karen, not everyone in this world speaks english. This video was pretty straight forward and if you still have questions after watching this, you probably shouldn't play with your husband's powertools anyway. Please stay safe and get a helmet

@JerrySmith-ih9rd Ай бұрын

Paper was 240 grit wet or dry., spritzed with water. Yes, it obviously was superglue. The rubber was an old bike inner tube….in a pinch you could probably use a stronger painters tape. I watched it one time and from a lifetime of working with and maintaining hand tools I picked up on the answers to your questions.

@loganpirie4387 Ай бұрын

@@besthubiever This comment wins!

@bascomwholehogue Ай бұрын

@@besthubiever you’re a tool for being rude.

@sunriseboy4837 Ай бұрын

Thank you. Excellent instruction. What is the green compound on the piece of dowel in the drill?

@jansmit4628 2 ай бұрын

Nice video on sharpening the tool. To avoid rust, you should also apply some grease on the blades after cleaning the blades before storing them. After several grease sessions, the blades will inherit a thin film of grease on them which protects it from corrosion. If a person takes good care of a tool, the tool will work perfectly for him or her.

@tipsintelligent2605 2 ай бұрын

Thanks bro

@JuniorFarquar 2 ай бұрын

Ballistol

@DP-ol1wh 2 ай бұрын

Fluid Film. THE BEST. does no harm to plants.

@cypeman8037 Күн бұрын

What’s KZfaqs fascination with using toothpaste for everything except brushing your teeth?

@tipsintelligent2605 Сағат бұрын

It is effective in cleaning

@suresoundslegit9280 Ай бұрын

how is any of this a "special way"? All you did was clean the blades, grind, polish, and sharpen them. This is basically the standard way to sharpen any blade

@tipsintelligent2605 Ай бұрын

Thank you for your feedback

@suresoundslegit9280 Ай бұрын

@@tipsintelligent2605 you don't have an answer, do you

@davidwharton841 2 ай бұрын

It's like something you'd do in lockdown due to boredom.

@Tuberesu 2 ай бұрын

There isn't ONE of these "sharp as a razor" hints that work, NOT ONE!

@greggerstner5599 Ай бұрын

I imagine that the trick with the dowel and compound makes a very sharp edge. Gonna try this

@mrcryptozoic817 2 күн бұрын

"Sharp as a razor" is wrong. The edge isn't durable enough to hold up. You're not trimming your beard; you're trimming wood of variable hardness. Go look at a factory edge on one in the store and make it no sharper than that.

@SweetCreative-nt1ep 3 күн бұрын

Your ideas are very creative and useful, I like the way you put your heart into it.

@readplanet23 2 ай бұрын

Great video. Keep up the good work. Have A Productive Weekend! 🪓🪚

@nofotomojo 2 ай бұрын

Not very intelligent to use a grinding device spinning toward you. I just use a fine file to sharpen.

@Nighthawkinlight Ай бұрын

I like the little wedge to hold your drill trigger in. Nice ideas.

@tipsintelligent2605 Ай бұрын

Ok man

@harry130747 14 күн бұрын

You often find the blades are bent at the bolt hole and have to be straightened.

@Ben-oz4df 2 ай бұрын

Red stuff is very mildly abrasive toothpaste. I *think* the green stuff is polishing compound.

@tipsintelligent2605 2 ай бұрын

Ok man

@stevenwilgus8982 2 ай бұрын

The low speed means better control. Overal, if you don't have a dedicated sharpening system, this is pretty good.

@tipsintelligent2605 2 ай бұрын

Thanks bro

@kobiroar4221 2 ай бұрын

Could have done the whole job with the stone in the first place

@troon5488 17 күн бұрын

Ingenious!

@frankly5171 2 ай бұрын

Too much trouble to sharpen some shears. I can think of a dozen ways to do it easier.

@frankstrawnation Ай бұрын

Please, tell us at least one way.

@kuwatsugiyono 2 ай бұрын

Terima kasih telah berbagi ilmunya sukses selalu kawan 👍

@tipsintelligent2605 2 ай бұрын

Thank you for supporting the channel

@scottk3292 4 күн бұрын

recommended by 4 out of 5 gardeners to stop blade decay.

@tipsintelligent2605 4 күн бұрын

@boris325 Ай бұрын

Worth doing this maintenance if the shears are old and good quality steel.

@Backstabbio 2 ай бұрын

Very clever!

@DELAWAREBOWHUNTER Ай бұрын

I went to harbor freight and bought a new one for $2.35. The video was still playing when I got back! DUH!

@tipsintelligent2605 Ай бұрын

Thanks man

@mshum538 23 күн бұрын

I don’t plan on shaving with mine, just regular pruning so I will continue to use my metal cloth for all of my edges…✌️

@tipsintelligent2605 21 күн бұрын

Thank you, it's very easy

@fredrichenning1367 Ай бұрын

You can by honing and grinding wheels for very little money. But this is OK if you have a lot of time to kill every day. Actually, if you buy a Dremel, you won't even have to take it apart.

@ROKuberski 2 ай бұрын

There are many ways to accomplish this task. This is just one, and certainly not the best one. It's not necessary to polish the tool unless you want to display it on the wall. This tool is designed for rough use. Someone will jam it into the dirt to cut roots off, it will be thrown in a drawer to rust again. However you do want it sharp and to operate properly. Oil the joints, and use a stone or even a file to make it sharp. Clean it with a wire brush. This ain't rocket science.

@tipsintelligent2605 2 ай бұрын

Ok man

@David0lyle 2 ай бұрын

Just cleaning out the mating surfaces can do wonders.

@americanangler94559 2 ай бұрын

The toothpaste part was GAF!

@lospadresapa6028 2 ай бұрын

what kind of paste?

@delladog 2 ай бұрын

Yea I really have old bicycle tubes lying about, all that messing around when you can use a simple knife sharpener I use it on all my garden tools

@miladne1092 Ай бұрын

no, it should be done from one side only

@mrbrown6421 17 күн бұрын

Well done, sir. Thank you.

@tipsintelligent2605 17 күн бұрын

Ok mam

@jatco84 Ай бұрын

Excellent...!!

@cmonkey63 2 ай бұрын

And to keep them sharp, I have a bottle of silicon oil but any oil will do. I soak a rag with it in a bowl and wipe them down after every use. Still going after 10 years.

@tipsintelligent2605 2 ай бұрын

ok man

@electroniquemecaniqueetaut1804 20 күн бұрын

What is that green material used? which looks like solid soap

@tipsintelligent2605 19 күн бұрын

I use a stainless steel polish

@mrjomaled755 9 сағат бұрын

all that trouble for pruning shears? Just buy a new one....

@tipsintelligent2605 Сағат бұрын

Ok man

@moshkateer9595 2 күн бұрын

Do they have Dollar Tree in the 3rd world?

@robertburns7670 Ай бұрын

that's like the 40 years in the wilderness to paradise ! Mill file is all you need ! ... be careful you don't lose a finger !!

@tipsintelligent2605 Ай бұрын

Thanks bro

@peterstephens6168 16 сағат бұрын

Be sure to brush after every prune.

@SarahWinterbottom-dv3tm 2 ай бұрын

Very good demonstration of how to do it, although you forgot to ad a film of oil to them before you put them back together, that helps prevent rust in between the two sides ,the nut and bolt can also be done, a dab of superglue on the end of the bolt after the nut is screwed down will prevent the nut from self loosening, which can sometimes be an issue,

@tipsintelligent2605 2 ай бұрын

Thank you for suggesting me, I overlooked this

@JuniorFarquar 2 ай бұрын

Perhaps Loktite instead of cyanoacrylate (CN)...

@Steakfrie Ай бұрын

Give non toxic furniture paste wax a try instead of oil that will run off. Works as a lube in the pivot joint also. Carpenters use paste wax on tools and bare metal table tops to keep them slick and rust free. Oil can contaminate plants. The best rust prevention is cleaning and drying secateurs after each use. The nut you see on this secateurs is a locking nut. It has a plastic insert that prevents loosening.

@oldbatwit5102 17 күн бұрын

Look at the video. That nut has an insert that will keep it locked on, no need to add anything.

@d.k.1394 2 ай бұрын

Where are u from?

@regnadkcin6702 2 ай бұрын

What is the green stuff rubbed on the wood?

@fatroberto3012 2 ай бұрын

It is a polishing compound bar, used on buffing wheels and leather strops for polishing metal.

@user-hm1cw5ri5u 2 ай бұрын

👍👍👍👍

@environmentaldataexchange3906 2 ай бұрын

Hey. That's my toothbrush!

@railgap Ай бұрын

? OFGS just soak those blades in coke overnight. Also, clamping power drills in vises is good for them @_@ Good grief, Charlie Brown.

@tipsintelligent2605 Ай бұрын

Thanks bro

@alliscrawler 15 күн бұрын

Thanks. People chill.

@tipsintelligent2605 13 күн бұрын

Ok man

@stevenlengyel9701 2 ай бұрын

Cool idea

@tipsintelligent2605 2 ай бұрын

Thanks man

@d.k.1394 2 ай бұрын

Wow.....very clever

@d.k.1394 2 ай бұрын

I asked Where are you from?

@johnsmith6309 2 ай бұрын

Use a Drexel tool.😊

@wayneessar7489 2 ай бұрын

Please what is a Drexel tool?

@JuniorFarquar 2 ай бұрын

Dremel

@lospadresapa6028 2 ай бұрын

what kind of spray?

@tipsintelligent2605 2 ай бұрын

I use water

@roybrazeau3486 2 ай бұрын

Dremel tool with accessory kit is a lot quicker!

@farmerpiki Ай бұрын

Moral of the story: take your shears to your dentist, they have all the tools to sharpen it!

@jimjimgl3 Ай бұрын

But the dentist will reprimand you for not flossing your shears after brushing..

@nedkelly8495 Ай бұрын

Useless. Just get a file. Easy ad. All that u show is rigmarole

@kennybo-iy2ed 2 ай бұрын

£2.99 lidl

@d.k.1394 2 ай бұрын

Congratulations

@michaelodwyer5305 2 ай бұрын

I will remember that trick.

@freddywoodcreations 2 ай бұрын

Ahora que empieza la primavera pondré en práctica este video

@tipsintelligent2605 2 ай бұрын

ok man

@freedivemd9366 2 ай бұрын

What's the green stuff?

@JuniorFarquar 2 ай бұрын

Polishing compound

@terrywawro2951 Ай бұрын

Green Rouge Buffing Compound

@savannaswildnatureworkshop7810 2 ай бұрын

typical guy..use a gallon of clean water to rinse off a soapy trimmer blade...I'm pretty sure he doen't cook or clean house either..

@tipsintelligent2605 2 ай бұрын

Thanks lady

@stevieb6173 2 ай бұрын

typical girl to bring it to our attention, nag nag nag ......

@riflebear1711 2 ай бұрын

No. I bet he built the house instead. While she sat on instagram.

@48grizzly Ай бұрын

Ever heard of a Dremel Tool ????

@tipsintelligent2605 Ай бұрын

Ok man

@stevemccull9699 14 сағат бұрын

Should NEVER sharpen the back side!! It must stay flat!

@brundo129 2 ай бұрын

Plus no cavities!

@jackalope-mystery Ай бұрын

very nice, new subscriber

@tipsintelligent2605 Ай бұрын

Thanks bro

@paulhughes7079 Ай бұрын

Some InoratiBUseL

@dougbarker982 2 ай бұрын

Ever hear of a dremel tool?

@tipsintelligent2605 2 ай бұрын

Thanks dude

@dtsouza2519 2 ай бұрын

A Dremel tool will also work to do this but Dremel does not offer a extra large sanding drum.The much larger diameter of the drill chuck works better, and not everyone can afford a Dremel.

@midwestg4105 2 ай бұрын

All of to sharpen garden shears!?! I think not. Many other easier and quicker ways......

@tipsintelligent2605 2 ай бұрын

Ok man

@gadgetroyster 14 күн бұрын

Or use a Dremel tool!

@user-fe3cw7gk9h 2 ай бұрын

👍👍from Norway 🇳🇴

@tipsintelligent2605 2 ай бұрын

Thanks bro

@martintheron1386 2 ай бұрын

Chromium oxide perhaps

@gigmaresh8772 2 ай бұрын

But the majority of Americans don't know how to use a common screw driver ! 😅 Those persons should buy new and donate the old ones to a handyman

@tipsintelligent2605 2 ай бұрын

Thank you for supporting the channel

@Tips365day 28 күн бұрын

6:15 How wonderful! I learned a lot of tips from your creative videos

@tipsintelligent2605 27 күн бұрын

Thanks bro

@nattsurfaren 2 ай бұрын

Green stuff?

@tipsintelligent2605 2 ай бұрын

I use stainless steel wax

@dtsouza2519 2 ай бұрын

The green stuff is chromium oxide polishing compound, available at any hardware store.

@meikoengelsberger 2 ай бұрын

Hallo Leute . Die Idee gibt"s schon seit Anno Dazumal ! Ma. sagt im Allgemeinen Schraubzwinge zu dem Werkzeug ! 🧐 👆

@alestout5632 9 сағат бұрын

I just use a round file simple

@vahteddineker8701 2 ай бұрын

Makasın enzayıf yeri uc kısmıdır uckısmıynan kesmeye kakışıp insanları yanıltmayın

@gtsteele6219 4 күн бұрын

I’d just buy a new one

@sattaurnikki Ай бұрын

Why do you want to cut rubber instead of the plants? 😱😱

@kroscuro Ай бұрын

Toothpaste? I stopped watching there.

@tipsintelligent2605 Ай бұрын

Ok man

@harry130747 14 күн бұрын

Toothpaste is a good abrasive.

@thangknowa3288 13 күн бұрын

To not oil the blade and tool upon completion exposes that He is merely a novice.

@tipsintelligent2605 13 күн бұрын

Soooooryyyy

@RickaramaTrama-lc1ys 11 күн бұрын

Great job and I have 3 pairs of these that need the same treatment so thanks for the education~!! Liked and Subbed.

@tipsintelligent2605 10 күн бұрын

Thanks bro

@integr8er66 2 ай бұрын

I think the only information of value here is how to make your own sanding wheel

@SN-zb7ew 19 күн бұрын

That is a great trick and I’ll guarantee you one that I will use many times

@tipsintelligent2605 19 күн бұрын

Thanks dude

@garyleahy4537 Ай бұрын

So after going through all the trouble of making the "drill attachment", you still used to stone to sharpen the edge. What a waste of time and energy. None of these so called "hacks" really work.

@robinmarwick1982 23 күн бұрын

If you'd taken the time to notice...the abrasive paper was 250g the stone is probably 1000g the dowel with compound is the finishing polish...the hack works pretty well.

@RizhaFamily 2 ай бұрын

Hello respected content creator, I am very interested in the content you have created, and if you are willing, I would like to request permission to re-upload it on our platform. We are ready to share the revenue with you. Thank you.

@tipsintelligent2605 2 ай бұрын

Sorry

@moshkateer9595 2 күн бұрын

Pointless theatrics followed by a whet stone. Just use the stone

@d.k.1394 2 ай бұрын

Its like new 😊