Just tape modded my keychron q2 and it sound amazing
@nathanwright8047 Жыл бұрын
I’m getting q2 soon I’m gonna do this cuz of you
@onrdx Жыл бұрын
does he make the keyboard quiet ?
@doopeymoopey1364 Жыл бұрын
i have a q2 and tape modded and also switched out the foam at the bottom for something more thick and it THOCC
@rocketpadgamer6 ай бұрын
q3 is better
@ducksractuallyepic5 ай бұрын
I'm getting a Q1 V2 special edition champagne gold
@silentfrost3645 Жыл бұрын
Don't forget to use a big mousepad under the keyboard to make the sound more thocky
@PhytonG1642 Жыл бұрын
I use towel, 4 folds. It's thicker
@westernpigeon11 ай бұрын
i stuffed a bounty roll inside mine
@ZayyanAmir7MU10 ай бұрын
@@westernpigeon😂😂😂
@gameboyv17907 ай бұрын
@@westernpigeonlmfameow
@laughing57527 ай бұрын
Why people so obsessed with thock. It doesn't make sense
@AGOxAsura Жыл бұрын
Here's a tip if you use 60% or 65% mechanical keyboard use only 2 layers of mtx tape but if you have 70% 80% 100% use 3 layers of tape only don't go 4 tape or else it wouldn't work
@AGOxAsura Жыл бұрын
Also do not put the tape on the face of the motherboard or else the keys wouldn't work put it on behind the motherboard
@BigDomDaddy Жыл бұрын
I have 65 percent. I did 3 layers. Any issues ?😅
@AGOxAsura Жыл бұрын
@@BigDomDaddy no not at all thats actually ok as long as you dont use any other tape than masking tape because masking tape are thin so 3 layers is actually good it makes the sound way better and deeper also poppy sound
@AGOxAsura Жыл бұрын
@@BigDomDaddy i use 60% mechanical keyboard i used 3 layers of thin mtx musking tape it sounds so good and poppy 3 layers of thin tapes is actually good for 60% 65% but dont use other tape for 60% 65% 3 layers of thick tape problems are 1. Motherboard cant fit to the case 2. Keys wont work because the tape is too thick for the keys 3. Thick tapes can damage your motherboard 4. Thick tapes actually makes the keyboard sound not good like its a super deep like silent keyboard
@ImFafe Жыл бұрын
@@AGOxAsurawhat do you mean motherboard?
@Greek10911 ай бұрын
my keyboard has like 50 mods done to it i have the tape mod i have the foam mode with cotton and then i have o rings and it sounds nice
@rocketpadgamer6 ай бұрын
You're definitely lying Mods make keyboards sound bad
@MrDarkside13555 ай бұрын
Does it fit with the foam and tape mod?
@rocketpadgamer5 ай бұрын
@@MrDarkside1355 hopefully not
@JulianRalphie4 ай бұрын
I’m doing those three mods too. Excited to see what happens
@AnonymousSpidey Жыл бұрын
For anyone wondering the keyboard is Glorious keyboard with a polycarbonate plate switches Im not sure but sounds like gateron black maybe not too sure though but its sounds amazing also have the same keyboard and typing on it is amazing and addicting
@armandoarroyo5 ай бұрын
What kind of key caps? Thanks
@AnonymousSpidey5 ай бұрын
@@armandoarroyo I can't really tell. It they seem like ASA keycaps white mint
@Angel-uo7ux5 ай бұрын
i love u
@lexijohnson7169 Жыл бұрын
sounds so good
@rocketpadgamer6 ай бұрын
Only the before one sounds good
@xslearalt15746 ай бұрын
bros high@@rocketpadgamer
@yourvenparianen53903 ай бұрын
I would use a layer of foam as well just to get the sound a little deeper
@Hi568393 ай бұрын
Unclear directions my keyboard is now a nuclear reactor
@KukaiTori Жыл бұрын
Would it work if i taped the tape to itself (essentially creating a layer insert instead of an attach-on) so that no faces are sticky, or is the whole point of taping the pcb so that the direct contact assists the dampening/cushioning?
@note_07 Жыл бұрын
that's actually smart
@Chefffff8 ай бұрын
Late, but, i think the stickiness helps, like how snow makes eveything quiet. Keeps sound in. Would be same as 2 layers of reg. way tape
@marshallmaia81306 ай бұрын
@@Chefffff Instructions unclear, I put snow in my keyboard and it melted...
@Omega-EP20 күн бұрын
I'm going to try this as soon as I find out which sort of tape I'm supposed to use.
@ToshiroCR72 ай бұрын
I will do this with my K2... nice reel 👍🏻
@Zestlera5 ай бұрын
Yeah I did 2 mods on an r68 keyboard, it sounded good when it came but I modded it and now it sounds like a really high end keyboard
@M.i.k.e.-_-10 күн бұрын
Next video: put a frozen snickers bar in your ketboard to make it sound deeper😱😱
@Razhzar11 ай бұрын
Just modded Hyper x Alloy Origins 65%t some hours ago it feels amazing, it feels poppy and in general amazing. I really like it. But the problem was making the holes, it was the hardest part.
@char22849 ай бұрын
Same it so much better. How much layers did you do on yours?
@Razhzar9 ай бұрын
@@char2284 I had a small tape, very thick and wasn't enough to fill many space. thats why i did like around 10-15 layers to cover it all.
@rocketpadgamer6 ай бұрын
SEE, MODS CAN ALSO DAMAGE THE KEYBOARD, AND ALSO MAKES IT SOUND WAY WORSE, WHAT IS EVEN THE POINT IN DOING THEM IF THEY GIVE NO ADVANTAGES
@rocketpadgamer6 ай бұрын
@@char2284wdym it's so much better Tape mod killed that keyboard
@maxkade91336 ай бұрын
@@rocketpadgamercan you toggle yourself off please
@SRullEliz6 ай бұрын
Ich liebe es ! 😍 Danke 🙏🏻
@enespinar9711 Жыл бұрын
Omg thanks that’s make sense
@NovaCaine24892 ай бұрын
My phantom 87 with graywood v3s and 3 layers of painters tape plus a layer of duct tape sounds so good
@prartmusicАй бұрын
Its sounds way much better now/
@justsliflandsАй бұрын
It makes such a big diffrence
@variofranky2 ай бұрын
My ajazz is tape modded but it still sound kinda same, but a little thocky
@marcksolo44475 ай бұрын
Am i crazy or is this a Jippy music in the background ?
@spaghettiunit Жыл бұрын
Thank you.
@RedditExposedShorts Жыл бұрын
You helped me a lot Thank you I tape moded mine And now it sound good
@rocketpadgamer6 ай бұрын
WDYM IT SOUND GOOD IT SOUNDED GOOD BEFORE TAPE MOD, AFTER TAPE MOD IT SOUNDS HORRIBLE
@dalvizar40402 ай бұрын
@@rocketpadgamerdont ask other people to join your skill issue in tape mod lmao
@dalvizar40402 ай бұрын
@@rocketpadgamerdont ask other people to join your skill issue in tape mod lmao
@silly_goofs9 ай бұрын
yeah i duct taped mine. i didnt have masking tape but it worked pretty good
@rocketpadgamer6 ай бұрын
Tape mod is a scam
@dalvizar40402 ай бұрын
@@rocketpadgamerdont ask other people to join your skill issue in tape mod lmao
@nameremixx9311 Жыл бұрын
Wait wait, is this only for hot swappable keyboard or non-swappable keyboard can also be modded?
@Lj2crazyy Жыл бұрын
For both
@chicken895110 ай бұрын
Every keyboard can be modded actually.. The only difference is that hot swappable is easier to remove the switches rather than spending huge time by soldering those so if you have non hot swappable which means you'll find it no difference when taping it because you're clearly removing the keyboard parts so at that same point you can remove your switches from there too
@NSleaf7 ай бұрын
what's switches do you use
@smpjx5 ай бұрын
sounds like popcorn
@wemely31968 ай бұрын
I did 4 layers on my hator starfall (the cheapest mechanical keyboard in ukraine). My outemu blue switches went from clicky to a bit creamy
@SLV9S Жыл бұрын
Do you think this would work on the kit Adam by KBDcraft?
@neuropathical Жыл бұрын
itll work on anything
@masecordle4439 Жыл бұрын
What are those keycaps my brotha
@Yehce6 ай бұрын
XDA profile
@avol5780 Жыл бұрын
What other mods did you use?
@Blob_Vioto123 ай бұрын
What switches do you use
@redrum66194 ай бұрын
Is this for keyboards that don’t come with foam pre installed ? Or do it to any keyboard
@solderfumes Жыл бұрын
no more hollowness, but those switches sound soooo scratchy 😩
@DemohamAlumium6 ай бұрын
It's the switches problem
@NecterFN9 ай бұрын
What keyboard is that by the way?
@jacobkKATE-bj9lt8 ай бұрын
i did in my custom rk61 and it make something difference btw i use 2x layer
@DJ136766 ай бұрын
Yes you can you can use 3x that's what he used
@hanzfiqz323210 ай бұрын
What keyboard did you use in this video?
11 ай бұрын
how did you get side switches aligned with foam in
@timothylilley46338 ай бұрын
hey, do you know what keyboard this is (Keychron v1 or the Q2)?
@berknoyan75946 ай бұрын
will this make keyboard more thockier or more tactile? could anyone help? i think any dampening effect whether foam,tape,or soundproofing material like mlv makes sound more deeper, more thockier. any help?
@Retro-zoUWU3 ай бұрын
I’m worried about something going wrong cause I have a type writer styled does it work with that and what does the ports look like
@Zemun_SerbianCB6 ай бұрын
*T Y U I*
@xslearalt15746 ай бұрын
my keyboard doesnt come out can u do one on e-yooso z686 red switch?
@PristineYVES5 ай бұрын
This does work on any pcb?
@ItzFellowzmonk5 ай бұрын
does this work with the higround %65 black ice model?
@Art_Airbear Жыл бұрын
There Shell be 69 comments.😂
@ngtkyw4033 Жыл бұрын
good
@icyxxxxx6 ай бұрын
Didn’t make any difference for some reason should I screw it close so it works?
@adsanm96432 ай бұрын
is the before and after only including tape mod
@bounomejp6423 Жыл бұрын
Is it safe to use painters tape though? I saw a video of ClickandSwitch doing 7 mods. She said she almost started a fire using painter's tape and it's safer to use electrical tape if there is a battery.
@vigne888 Жыл бұрын
that usually only applies to keyboards with batteries
@poo48 Жыл бұрын
its safe unless you have a keyboard with batteries
@rocketpadgamer6 ай бұрын
The only good option is to not tape mod
@dalvizar40402 ай бұрын
@@rocketpadgamerdont ask other people to join your skill issue in tape mod lmao
@berknoyan75943 ай бұрын
hi tycottle, thanks for the content. i have keychron q5 pro. and i want to use tape mod as well. people said you should use painters tape because it wont leave a residue so i purchased a good brand. now im checking web again to be %100 sure however some people said battery might got heated and tape could catch on fire. however my painter tape has high heat resistance (80 degree celcius - 176 fahrenheit) can i use this painter tape? i never feel my keyboard is hot, it'll always cold with aluminium frame and i never turn on rgb also. should i buy electrical tape which could leave residue but i guess it wont catch on fire or painter tape is good/better? lastly if i use painter tape mod. how many layers i should apply, 3,4,5? and should i apply tape to whole pcb or should i leave some parts open, is there a thing i should be careful?
@MadiHardinge24 күн бұрын
Mine don’t have screws
@mfchaz7 ай бұрын
Does this work on hunstman mini
@dalvizar40402 ай бұрын
Does this mos dangerousnand can break the pcb? I still wondering about this
@aleksandrmikhailov32554 ай бұрын
Maybe its just me but my keyboard sounds worse and louder after this mod
@THE_DEMON2796 ай бұрын
can i do it on yellow switches ???
@odiirectly__3356 Жыл бұрын
All specs from the keyboard
@murderer20224 ай бұрын
Is normal packing tape good or is masking tape required?😊
@fansmx4-hd7dw4 ай бұрын
Non conductive tape like painters tape or masking tape. Also avoid using the battery with these mods
@Jerms_. Жыл бұрын
So with you space bar mine has two extra little black switches I do not know how to get them out
@commenter1639 Жыл бұрын
You should be doing this on the bottom of the pcb so the stabilizers shouldn't be affected
@mma.y Жыл бұрын
Thise two extra things are stabilizers
@thanhbuitien5954 Жыл бұрын
give me the name of the keycap
@venomlover42 Жыл бұрын
what keyboard is that
@user-xx8mr8rn9e Жыл бұрын
Is it good if i will painter tape my keyboard with battery?
@alantic1171 Жыл бұрын
No, use electrical tape instead :)
@giakhiempham405710 ай бұрын
is this M1 keyboard?
@ZahirKhan-ib2pq Жыл бұрын
What are those key caps
@Osman-fx4ll Жыл бұрын
name of the kit plis. looks similar to monsgeek m1
@zhariskandar279011 ай бұрын
Its the gmmk pro
@fflopse10 ай бұрын
Just wanted to point out that the keyboards sound different when all keycaps are attached in comparison to only four keycaps installed. So the comparison isnt really telling us a lot.
@strong11349 ай бұрын
he did it willingly
@Deleted-user-y473y656 ай бұрын
Do i put painters tape on my rk71?
@yevolution6 ай бұрын
I'm planning on using eva foam.. is it better? or should i add eva foam with tape mod?
@maxwellhunterr6 ай бұрын
You can do both and see how you like the sound :)
@TheGovermemtOfTheUnitedStates Жыл бұрын
Do we have to take the switches out or can we leave them in?
@WellBeSerious12 Жыл бұрын
Only take them out if you can't reach back of PCB, obviously.
@TheGovermemtOfTheUnitedStates Жыл бұрын
@@WellBeSerious12 ok, thanks
@lemonloaf Жыл бұрын
@@WellBeSerious12can i do tape mod a non hot swap?
@Justin-ij4zl Жыл бұрын
@@lemonloaf yes hotswapable or not to do tape mods or anything it doesn't matter
@lemonloaf Жыл бұрын
@@Justin-ij4zl also i have another question i was balancing my stab and i put it back together and i put my keycap on and the key didn’t go up do u know how to fix this?
@DBYT Жыл бұрын
I’ve got the same keycaps!
@Unknown-Thief Жыл бұрын
hey man, i feel like i see you everywhere! but i am subscribed, cause well you are underated as heck!
@safeen236 ай бұрын
what are the keycaps?
@aresss.10 ай бұрын
It's safe?
@TheLorax-sq8qg11 ай бұрын
Will it fry if u have a wired keyboard?
@koversz10 ай бұрын
Nope,no problem. Just use masking tape and you’ll be fine
@MookieIX4 ай бұрын
Be careful if your keyboard has a battery in it! I fit does you should use electrical tape instead~! You could start a fire if you don't
@soey.carter41267 ай бұрын
If I’m going for a clack sound should I avoid tape modding?
@maxwellhunterr6 ай бұрын
Yes
@W_flow Жыл бұрын
I put tape on and now the keys dont respond..
@IngeniousReaper Жыл бұрын
Oof
@Chickeneater_69420 Жыл бұрын
you prob covered sumthing
@VibrantReborn719204 ай бұрын
My keyboard is Visnu model:K561R Red dragon can i tape mod it?
@liuzhongqizhangsuyin Жыл бұрын
can someone pls tell me something. this is my first time customizing a keyboard and im getting the gmmk pro. It comes with foam at the bottom of the case so can i still use tape or does the foam make up for the tape?
@TyCottle Жыл бұрын
still use tape
@supersploder8130 Жыл бұрын
I dont notice a difference lol
@01dom Жыл бұрын
Would putting a layer of electrical tape on the painters tape make it even better?
@TyCottle Жыл бұрын
I’m not sure. I have actually tested this but it sounds about the same, but a tiny bit more muted.
@shiiraga1111 Жыл бұрын
It makes it sound creamy and clacky
@JaimpieNL16 ай бұрын
Does this work with the magnetic switches from the 60HE?
@ZeroChoices4 ай бұрын
I know Im late but pretty sure you can
@kizbo696 ай бұрын
Does it affect response time
@wokevfx14526 ай бұрын
no
@ehabmakarem78568 ай бұрын
do u recommend using painter tape if the keyboard has a battery? Wipyo says its better and safer to use electrical tape
@rocketpadgamer6 ай бұрын
Just don't use any tape Tape mod is a waste of time and makes your keyboard sound bad
@brurmonemt11 күн бұрын
@@rocketpadgamerdude thats ur opinion stfu and stop discouraging people 💀
@SonoNessuno-yw5sj10 ай бұрын
Just taped my keychron k14 and it’s sounds NOCE
@thecheeseisgood12345 Жыл бұрын
Does the tape ever unstick from the pcb?
@SDGunfighter Жыл бұрын
Yes, although only for masking tape, as any other tape will stick to the pcb and leave residue
@napoleon-sk5oc Жыл бұрын
Residue for sure ... don't do this
@ZackGames4Life Жыл бұрын
@@napoleon-sk5oc thats why you use gaffin tape, no residue
@blobstudio9 ай бұрын
@@ZackGames4Life no use painters tape or electrical tape, else the pcb will be fried
@krayt108 ай бұрын
@@blobstudiohockey tape my brother. No residue and is fabric unlike the wax paper like masking tape
@kanashimiX26 күн бұрын
can I do scotch tape?
@jjglaser9 ай бұрын
Painters tape gets brittle and very stuck over time. is there no other alternative?
@aungsan75418 ай бұрын
Masking tape
@rivql4286 ай бұрын
What switches are those
@H313AT3 ай бұрын
GMK 67, comes with jwk taro switch
@christempleton9656 Жыл бұрын
JIPPY
@sharpshooter6s1075 ай бұрын
Any pre-caution while doing this?
@H313AT3 ай бұрын
- be aware that if you want to undo this, it could leave sticky residue from the tape that are a hassle to remove (personally I don't care of some inside residue but some people care, try using isopropyl alcohol to clean it) - usually don't need to remove the switches just the keycaps and screw, as long as you can open the case and access the back / base of the pcb (board) - sometimes there're under rubber pad screw, so don't force the case open - don't tape the screw hole - don't tape any port - could leave the capacitor alone or still tape it - if have battery use electrical tape (to prevent short they said) - if have battery take care not to break the battery cable plug / solder when opening case
@user-ob4bp5ml4i7 ай бұрын
can i use insulating tape?
@maxwellhunterr6 ай бұрын
I wouldn't
@NapzzzXD5 ай бұрын
Is it okay to play games like Fortnite with a tape mod because im guessing if u tape mod it u will have to press it harder for the key to work
@H313AT3 ай бұрын
don't worry, tape doesn't interfere at all with the switch press the mod are on the backside of the pcb (board) as long as the switch pin connects to the pcb board, the keyboard will work. the switch still click internally
@satria11ign5 ай бұрын
what keyboard is that?
@satria11ign5 ай бұрын
and what swittch?
@lolo_322 ай бұрын
Dose normal tale work
@brurmonemt11 күн бұрын
NO, you dont want to put tape that leaves residue behind or else it messes up the keyboard
@wh0o007 ай бұрын
Does doing this work with any keyboard and does it decrease its lerformance or actuation in any way? I currently have a steelseries apex pro ( I will be getting different keyboard/keyboards in the future ) and i was wondering if i could do this to make it sound better but am worried if it will make the actuation slower thanks in advance
@rocketpadgamer6 ай бұрын
Tape mod makes the keyboard sound bad The before one sounded really good The after one sounded horrible
@XmatineeX6 ай бұрын
Why are you pointlessly commenting that? This person obviously likes how it sounds, you socially inept retard. @@rocketpadgamer
@juandraalghifary98487 ай бұрын
is it safe for wireless keyboard?
@Roquxci_RBLX4LIFE7 ай бұрын
yes hes using a wireless keyboard
@SnowFritz6 ай бұрын
Does duct tape also works?
@thicccduck73856 ай бұрын
NO DONT DO IT. Sure it will work for a little but Duct Tape is conductive and will short out your board causing it to catch on fire potentially
@XTypeShii5 ай бұрын
I dont have any screws....
@imLorro5 ай бұрын
they are probably under the keys, so you have to remove the keycaps and the switches before unscrewing
@s0apdisco7 ай бұрын
Is it safe if my keyboard has a battery?
@maxwellhunterr6 ай бұрын
Leave the battery uncovered you should be fine.
@user-ov4it8hj5g5 ай бұрын
or just covering the whole layer once with 3 or 4 tape peices not layers or 3 or 4 layers on the entire whole ?
@imLorro5 ай бұрын
on the entire whole, however you should go 2-3 layers as 4 is usually too much
@user-ov4it8hj5g5 ай бұрын
@@imLorro I tried with 4 but for some reason my keyboard stopped working except for typing so for example I can't change my RGB and my capslock was on and its white when I press it again it works for typing but the RGB stays the same