Speed Up Your HP OMEN 16 - Prevent Overheating With Dust Cleaning & New Thermal Paste

No video

Speed Up Your HP OMEN 16 - Prevent Overheating With Dust Cleaning & New Thermal Paste

Рет қаралды 15,084

Күн бұрын

Get ready to revitalize your laptop by reducing your CPU’s temperature by 16 degrees Celsius in just six easy steps. Follow and subscribe to Kooling Monster and let us know which laptops to demo this process with next.
【PERFORMANCE/OVERHEATING SOLUTIONS】- available across the globe!
KOLD-01 Thermal Paste: bit.ly/kold-01-yt
KLEAN-01 Thermal Paste Cleaning Wipe: bit.ly/klean-0...
KOMBO-01 Screwdriver Set: bit.ly/kombo-0...
Air Duster: amzn.to/3YTclrP
【THERMAL PASTE KNOWLEDGE】
Thermal Paste Performance Comparison Test: bit.ly/bestthe...
How Much Thermal Paste Do I Need: bit.ly/thermalcal
How Often Should I Replace Thermal Paste: bit.ly/thermal...
What Is the Best Thermal Paste Pattern: bit.ly/thermal...
More Thermal Paste Knowledge: koolingmonster...
【ABOUT Kooling Monster】
Our vision is to make PC performance upgrades simple and low-cost for all. We hope to popularize DIY computer repair skills, enabling everyone to achieve significant performance improvements at an extremely low cost, while also reducing the negative impact on the environment.

Пікірлер: 45

@Bikster8 10 ай бұрын

Very easy to follow and in depth tutorial. Great video!

@koolingmonster 10 ай бұрын

Thank you for your comment! We are so glad to know that our tutorial and products have helped you!

@ifuckinghatebarking 5 ай бұрын

Someone actually mentioning which exact screw heads to use is great. Thanks for the video

@koolingmonster 5 ай бұрын

Thank you for your comment! We are so glad to know that our tutorial and products have helped you!

@wasa3437 7 ай бұрын

Hello, I have an HP Omen 16. It is recommended not to install thermal pads since using them with a thickness of exactly 0.5 generated temperature problems and the heatsink was not installed correctly. replace and use only thermal putty. Good luck for all.

@koolingmonster 5 ай бұрын

Thank you for the comment, we will improve our content in the future!

@MTM_Draws 22 күн бұрын

Thank you for the guide! Was able to drop my idle temps from 100 degrees celsius to only 60-80 degrees celsius! (Also I used the Corsair XTM50 thermal paste on my cpu & gpu)

@koolingmonster 17 күн бұрын

You are very welcome. Thank you for the comment! We are so glad that our videos or products might be of help!

@DevI-vl7gp 10 ай бұрын

Thanks! I managed to do all this in like 10 minutes thanks to this vid.

@koolingmonster 10 ай бұрын

You are very welcome! We are so glad to know that our tutorial and products have helped you!

@benji5098 7 ай бұрын

Bought the kit mentioned and subscribed. Thanks for making this content! Gonna try this out myself next week. ❤

@koolingmonster 7 ай бұрын

Thank you for the kind words! We will keep making videos like this!

@someperson5600 7 ай бұрын

shoot what is that other stuff that’s not on the cpu and gpu? it looks like thermal paste i wasn’t ready for that do i have to replace that too

@koolingmonster 7 ай бұрын

The stuff that is not on the CPU and GPU is thermal putty. It is a cheap substance that manufacturers use on components that generate less heat to save money. You can only change the thermal paste and not worry about them. If you want to remove the thermal putty, you can use thermal paste to replace them.

@vietcong_vet5833 11 ай бұрын

hey can you guys please do the asus tuf a 15 I need a guide on how to do this

@koolingmonster 11 ай бұрын

The ASUS TUF A15 is almost identical as the ASUS TUF F15 except for the processor brand. You can follow our F15 video and change the thermal paste. kzfaq.info/get/bejne/jqigm9F0s7O9pJc.html . If you encounter any problem we will be happy to help!

@user-ps9pr1rx5g Жыл бұрын

Thanks for this video I have the laptop , few days ago i used blower machine to clean the dust , the the battery is charging anymore I didn't open the laptop yet Do you have any advice how to fix it ?

@koolingmonster 11 ай бұрын

It's really hard to know exactly what the problem with without looking at your laptop. We suggest you contact the laptop manufacturer since you didn't even open up the back.

@unityUser Ай бұрын

just repasted the laptop, its working great now :)

@koolingmonster 17 күн бұрын

You are very welcome. Thank you for the comment! We are so glad that our videos or products might be of help!

@greengrasshopper-04 4 ай бұрын

I can't open the screwa of the heatsink it is a bit tight to open

@koolingmonster 4 ай бұрын

Hey there, typically, these measures can help prevent screws from stripping: 1.Twist with a rubber band (if not severely stripped). 2.Twist with black electrical tape (if not severely stripped). 3.Use nail clippers/pliers. 1.Best practices to avoid stripping: 2.Choose a high-quality screwdriver (like our KOMBO-01). 3.Ensure the correct screwdriver head. 4.Apply vertical downward pressure when turning the screw. learn more about lossen tight screws: koolingmonster.com/insights/how-to-remove-a-stripped-screw-from-laptop-and-pc-using-only-household-tools

@unityUser 5 ай бұрын

been 1.5 years since i bought my laptop, should i replace the thermal paste or make professional do the job?

@alexandergryn 5 ай бұрын

hi. its very easy and 1.5 years is too early to change the paste. Install some software and periodically monitor cpu/gpu temperatures. if one day your laptop overheats - then go for it. My opinion is you need to change the paste once in several years (4+) or when you change a cooler/sink.

@koolingmonster 5 ай бұрын

If you want to replace the thermal paste by yourself, following our tutorial might be helpful. Hope it helps you!

@unityUser 5 ай бұрын

@@alexandergryn that's why I'm here lol, I wanted to prepare for summer, I've been monitoring temps for more than a year now

@lobirdsamart 10 ай бұрын

I just got the laptop and its overheating thermal throttling will this help it a bit?

@koolingmonster 9 ай бұрын

Yes, this process improves the overall cooling efficency of the laptop which can help fix these problems.

@rakzbdgames1948 Жыл бұрын

hello bro... but... why dont replace the paste in vram , power chips?

@buianhtriet1764 Жыл бұрын

I wonder why they use thermal paste on VRAM and chipsets 💀.

@ThisisPartOne Жыл бұрын

It’s thermal putty like he said. Usually you’d have thermal pads

@koolingmonster Жыл бұрын

Hello! Thank you for your comment. The substance on VRAM and other chips are actually thermal putty, not thermal paste. If the thermal putty are not dried up or cracked, it is defenitely fine to leave them as is. Thermal putty is used for these chips because they produce less heat than core components like the CPU and GPU. Thermal putty is a cheaper substance that manufactures use to save money. However, if you decide to change thermal putty with thermal paste, it will surely benefit your computer.

@koolingmonster Жыл бұрын

@@ThisisPartOne Thank you for your reply! Yes it's thermal putty on those chips. Thermal pads are also used a lot by manufactures to save money. You can also replace those with thermal paste without any concerns!

@koolingmonster 11 ай бұрын

There will not be any negative impact.@@buianhtriet1764

@lowgoingman 9 ай бұрын

Too much thermal paste💀

@koolingmonster 9 ай бұрын

The amount of thermal paste shown in the video is actually correct! We used the buttered toast method and can directly see if we are using too much thermal paste. Thank you for your suggestion, we will continue to make better videos!

@coldsnowlightevilrabbit9122 3 ай бұрын

I even have a cooling fan under & it over heat, no chance in hell I ever buy Omen again in my life. Did never like HP & probably never will, since they clearly just sucks. Just like Apple & other horrible companies. Back to AMD - MSI & would say ASUS, but ASUS has lost my trust after horrible designs & stupid ideas. Thank you for the video enough, but this will not make this Omen pc to not overheat - since HP just sucks. CSL & OUT!

@richard-li1ll 3 ай бұрын

yeah i dont like mine for how much it overheats, even with cooling pad. now i get really bad stutters and i think my cpu is damaged, im too broke for this lol. but its lasted 4 years so far, maybe it is just a need for new paste

@wasa3437 19 күн бұрын

?? In which games have you overheated?

@wasa3437 19 күн бұрын

@@richard-li1ll HP OMEN 16 ITS NO COMPATIBLE WITH COOLING PADS

@koolingmonster 17 күн бұрын

Hello! I agree with what you said, but maybe the dust that hasn't been cleaned for a long time could be obstructing the cooling system and causing high temperatures. Regularly cleaning the dust off the heat sink and fan using our product can maintain good cooling efficiency.