Hi from Michigan • Flying Pilgrims RC Club - have this radio, second summer flying the Cessna 150T - Every step in this video worked as described - It solved the ballooning issue with the flaps and they also go down slow, like a real airplane. 👍 Thanks ✈
@Didyoureallythinkaboutit4 жыл бұрын
Super job. Make more soon. Just finalizing Hangar 9 P-51 build with full Spektrum. Avian 100a, Power 52, AR637T, HV Digital standard servos, flaps, Smart battery, and wireless remote receiver, Xoar e-14-6 and 13-8. The Spektrum videos have been an indispensable complement. A total package. Thank you a ton.
@jamesrichardson14552 жыл бұрын
Excellent example. Simple, direct and to the point. Thanks a million!!!
@SpektrumRCvideos2 жыл бұрын
You're welcome!
@darrenstafford2193 Жыл бұрын
Thanks. Very helpful. Please advise how I configure my flaps to work synchronously down together. Presently they are operating like ailerons when I operate switch D.
@gregpopp48472 жыл бұрын
VERY informative ! Ive owned a 6e for several years now and have been somewhat hesitant to dive into it - your instruction has inspired me to finally bind it up.
@SpektrumRCvideos2 жыл бұрын
Great to hear!
@gregpopp48472 жыл бұрын
@@SpektrumRCvideos When I purchased my DX6e a few years ago I also bought several receivers - they are 610s but they have different numbers - is there a difference and are they all compatible ? I sure wish there was a concise KZfaq video on setting up a plane step by step - Im not real anxious to learn I didnt something wrong with a $400 airplane.
@txkflier3 ай бұрын
The flap>elevator mix isn’t to prevent ballooning. Your plane balloons because you were going too fast when you lowered the flaps. The flap>elevator mix should be used to set the glide speed/descent rate at idle so that your plane will glide without stalling or descending too steeply.
@laurenceboag23259 ай бұрын
Super helpful. Especially the F Mode trim .
@Ouch.4 жыл бұрын
Finally a straightforward guide.....Thank You!
@kohenryker68533 жыл бұрын
i know it is pretty randomly asking but does anyone know a good place to stream new series online ?
@ryanesteban9823 жыл бұрын
@Kohen Ryker Lately I have been using Flixzone. Just search on google for it :)
@giannialfredo88303 жыл бұрын
@Ryan Esteban yup, been using Flixzone for since march myself :)
@kohenryker68533 жыл бұрын
@Ryan Esteban Thanks, signed up and it seems like a nice service :D I really appreciate it!!
@ryanesteban9823 жыл бұрын
@Kohen Ryker Glad I could help xD
@Journeytotheairlines26 күн бұрын
Hi, brilliant tutorial, very clear. Do you know why my flap servos aren’t slowing down but the elevator servo is when I change the speed setting in the flap system menu? Thanks
@KAJBS2 жыл бұрын
Is their a video on how to do this in sailplane mode? Using the throttle stick.
@bantampop3532 Жыл бұрын
👏👏👏👏👏
@Triplesea Жыл бұрын
Very nice, and highly understandable. Thanks!
@JeffsCustomRC4 жыл бұрын
Great tips as always👊🏼👊🏼
@keithdouglass36184 жыл бұрын
✈🌏👍 easy to follow. puts a new way of actually flying a plane. Keith Australia
@patrickscanlon79554 жыл бұрын
Great to listen to someone who knows what they're talking about. I wonder if you could post something on the carbon cub s on how to remove the GPS out of the model. Thanks keep it going.
@horsth95663 жыл бұрын
Very nice presentation. Well explained. It made it easier with the NX8 I just purchased. Do you have any videos on how to set up throttle curves. That would be very helpful. Thank you!
@chrisrobinson8604 жыл бұрын
Excellent video
@irwinwka2 ай бұрын
How do you adjust the throw on a two servo flap system. When using a three position switch on of the flaps has more throw than the other? The both start at zero throw. Thanks for your help. I’m using an ix20 radio
@terryrigden4860 Жыл бұрын
Very helpful thank you
@petercrowhurst4 жыл бұрын
can you do a how to set up sailplane mode . with crow braking and the like. 2 aileron 2 flap servo no y connector . please
@Jakefrc Жыл бұрын
Great tips, thank you!
@jh1982a3 жыл бұрын
Good tips... thank you
@chippinfoo3 жыл бұрын
Thank you, thank you thank you...
@williamdeschneider4154 жыл бұрын
Well done Tom. Thanks. Regarding using Flight Modes to enable elevator trim, does your example allow separate trim settings for mid flaps and full flaps?
@SpektrumRCvideos4 жыл бұрын
Yes it does :)
@rctrucks2094 Жыл бұрын
My DX6E doesnt have this option- Do I need to update the firmware?
@martymannisto11093 жыл бұрын
Just a quick question! Does the plane have to be bound up to the nx8 transmitter to set the safe select and the flaps switches? I'm new at this and I just can't get it to work for me whether I use new plane or bnf which my new planes are bnf . Tt evolution and the valiant please answer thank you Marty from Canada 🇨🇦 🛩
@dominicwhite15282 жыл бұрын
I was setting my flaps up and just wondered why that when you set position 0 to -100 it says -102% on the monitor display and the same with 100 showing 102% on the monitor display when 0 shows 0 . Many thanks 👍🏻
@BlvlWmpower4 жыл бұрын
I know this is off topic, but will spektrum release new 6 or 8 channel radio within the next year? Thanks, your products are superior.
@SpektrumRCvideos4 жыл бұрын
Always working on something new ;) keep your eye on the horizon
@AngryPepper19644 жыл бұрын
Being a total beginner with DX6 I’d like a detailed video on the “F” mode you briefly hit on, is there a more beginner based tutorial on the “F” mode setups? Thanks.
@SpektrumRCvideos4 жыл бұрын
There are many videos that we have produced and others that mention using the Flight mode menu but we have not done a dedicated flight mode video. Is a great idea but really the function is very broad and can be used for a large number of different functions and effects. So it might be a pretty long video ;)
@gregpopp48472 жыл бұрын
@@SpektrumRCvideos the F mode tutorial on trimming the flap/elevator mix was very informative - that alone will save me a lot of time.
@thefisherman11273 жыл бұрын
I am adding flaps to my Carbon Cub S 2 and couldn’t find the pre-done program on your website, I tried using the S+ and had to add flaps into the program for it and used Switch D and my elevator compensation kicks in but the flap servo does not move. I tried using the Carbon Z Cub program since it already has flaps installed and that doesn’t work either, I don’t know what to do or how to do it at this point.
@philbrennan67194 жыл бұрын
shouldn't the elevator trim have been negative?(down elevator when the flaps are engaged)
@SpektrumRCvideos4 жыл бұрын
It is positive when giving down elevator. When the stick is pushed forward that is technically positive pitch movement. Now this number will be different on the monitor screen depending on the reverse direction of the servo. Great question :)
@thomasjones33843 жыл бұрын
Have a Bird of Time glider w/Electric motor. I have installed spoilers on top of the wing. Am I correct i can use the above same method as for spoilers? Any other adjustments? Thank yo
@MrROCKRUSHMORE3 жыл бұрын
I have a UMX turbo Timber I get the Flap to elevator trim set up AS3X off then when I turn AS3X back on with flaps things get wonky do you have any recommendations. Thanks Rock
@randomvideosnathan21783 жыл бұрын
Wood this apply for a DXs transmitter bc my flaps are not working with a switch and its the last thing i need to bind on my bnf valiant can someone help me thanks
@wwilkens4 жыл бұрын
Totally unrelated but do you Tx allow to by-pass the 100ft switch to beginner mode from intermediate mode on the Apprentice STS? If not, do you know if that is even possible?
@javiernavarro57652 жыл бұрын
Cómo hago para ver el video en español Gracias
@brysonwilkins66743 жыл бұрын
Can you help me set my switches for thing like SAFE and landing gear
@aaronstrom162 жыл бұрын
These tutorials are awesome thank you. I'm having an issue whenever I choose a different model on my NX10 lately the flap settings are backwards..not reversed in servo reversing they are backwards to the switch position..if I do reverse the switch that overdrives the servo badly, I have to redo the entire 1 and 3 position settings. The middle settings are correct. I dont' know what is causing this to happen but it really causes alot of frustration going out to the field and having to retrim my flap settings. Could this possibly happen after accidently changing stick modes? sometimes apon changing brightness I accidently hit the mode menu and end up switching off the TX and recalibrating after that. Thanks and Merry Christmas.
@SpektrumRCvideos2 жыл бұрын
Hi Aaron, Changing the mode should not have done that, the only thing that comes to mind is that if you changed the servo to a different servo it could do this.
@tugwilson67584 жыл бұрын
Thank you, very useful.
@CaptFrank20012 жыл бұрын
Why does my DX6e monitor screen look different than yours (update 2.08)? Yours shows 6 channels and mine shows what appears to be 7 channels THR AIL ELE RUD FLP GER AX2 (I'm confused).
@SpektrumRCvideos2 жыл бұрын
There is an error in the current 6-channel transmitters that the radio shows a 7th channel on the display. This will be fixed in v2.09, which should be out in the next few weeks. You still have a 6-channel transmitter. To configure channels 1-3, use the top row. Channels 4-6 are on the bottom row. Position the cursor by counting and you will be fine.
@frankleonard62914 жыл бұрын
Thanks, but I have a F-16 that has slats and I need know how to set the slats with ailerons and elevators for landing, on a ix12 radio ????
@Hells_Gate4 жыл бұрын
Yeah, too many basic tutorials and not much in the complex area. The manual is useless
@frankleonard62914 жыл бұрын
It's crazy you can't get the help you need from Spektrum guys or there tech !!!!!!
@radioflitercairplanes17153 жыл бұрын
Call Horizon tech support
@dbowman85802 жыл бұрын
I added a 2 second delay but it's not working how do I deal with that
@SpektrumRCvideos2 жыл бұрын
Normally that is caused by the Flap channel being mixed to another channel to mirror the flap outputs. How are your flaps setup? What is the wing type set to?
@dbowman85802 жыл бұрын
What if in my original set was backwards such as my normal was at number 2 and not zero. What I did is I set up backwards. How do get it to zero for a normal set up. Also my 2 second delay did not function how do I trouble shoot that?
@SpektrumRCvideos2 жыл бұрын
If that is the case, then reversing the flap channel should fix it. Just be ready to adjust travel positions if there is any binding in the control surfaces
@dbowman85802 жыл бұрын
@@SpektrumRCvideos is that going to fix my two second delay
@yagamilight26933 жыл бұрын
Actually i have a problem with the right wing delay when i turn on the flap is this a normal thing ??
@SpektrumRCvideos3 жыл бұрын
Are you saying you have one flap that is delayed and another that is not?
@lunaamorosa65353 жыл бұрын
2 servi flaps come si fa ?
@Hells_Gate4 жыл бұрын
Why not just set up 3 flight modes and use the trim section as f mode and when you change flight mode you can trim the elevator and stay set for that particular mode. Way easier
@fixit5897Ай бұрын
you made very difficult to follow your instructions for someone making a new purchase, you talked too fast and did not explain how to get to the positions on the trans.
@prakkerschlang78238 күн бұрын
KZfaq has a button to go to half time. Use it rather than tell people to slow down just because you're less advanced in an area.
@leejimerson33543 жыл бұрын
iF YOU CAN PLEASE WALK ME THREW FLAP SET UP WITH THE IX12! tHANK yOU sIR
@LVBRIP3 жыл бұрын
Nice vid, but W H Y the annoying porn music???
@SpektrumRCvideos3 жыл бұрын
Background music helps cover up imperfections in the audio and background noise. It is just your standard copyright free tune, personally I think it fits ;)