This video is another stair spindle but a large section and I explain what I am doing while I turn.
Пікірлер: 184
@fernandorosales24184 жыл бұрын
I have conflicting emotions after watching this video. On the one hand, I feel inspired to watch someone with such fantastic talent. On the other hand, I feel like throwing my lathe away because I could never achieve this skill level. Thanks for the video. You have amazing skill and craftsmanship. You make it look so easy.
@edwardchapman19146 жыл бұрын
Your a machine Steve, truly amazing to watch, can't loose sight of the fact they are all identical.
@woodturner216 жыл бұрын
Thank you Edward
@PenStep626 жыл бұрын
An absolute joy to watch, brilliant turning
@woodturner216 жыл бұрын
Thank you
@hraun2berg6 жыл бұрын
Thank you Steve for that demonstration, totally enjoyed it 😊. Nice to see the man behind the voice. Júlíus
@woodturner216 жыл бұрын
Thank You
@robertphelan31685 жыл бұрын
Amazing work - I love turning - love the chips flying and seeing a project come to life. Was just asked to turn two matching spindles from my cousin - that is what brought me to your video. Thanks for sharing! Bob
@woodturner215 жыл бұрын
Thank you Bob
@aviatorbja5 жыл бұрын
Therapeutic to watch. You make it look so easy, yet the symmetry of the finished product and consistency among the lot is impossibly perfect. I am binge watching all of your videos now. Thank you for your contribution the wood turning community.
@woodturner215 жыл бұрын
Thank you again I am very pleased you enjoy them.
@Canada16085 жыл бұрын
We are clearly here in the presence of an expert craftsman :-) !!! Thanks for sharing.
@woodturner215 жыл бұрын
Thank you
@jimcsnr2 жыл бұрын
You make it look so easy! Must be years of practice, a pleasure to watch this much skill.
@woodturner212 жыл бұрын
Thank you, yes I have approx 80,000 hours experience
@thomassellers76136 жыл бұрын
Awesome talent and skill! I enjoyed it as usual... I hope you're making lots of money, because you deserve it. Really enjoyed seeing your face and hearing you describe your actions. Being quick and to the point also makes it enjoyable. Keep up the good work. Thank you to KZfaq!
@woodturner216 жыл бұрын
Thanks Thomas you comments are much appreciated, I wouldn't say I'm making lots of money but the comments are a big enough reward on their own.
@adamsimon74026 жыл бұрын
So impressive. Awesome watching you work.
@woodturner216 жыл бұрын
Thank you Adam
@billbales18866 жыл бұрын
What a great video. Because of you I have been mainly focused on spindle work and spindle projects. I think its overlooked by so many turners. However with your skills and videos I think so many more people will begin to appreciate other things besides bowls and vessels. Keep up the great work and please keep posting. #1 channel and turner on You Tube.
@woodturner216 жыл бұрын
Thank you Bill your comments are appreciated
@paulrichmond69036 жыл бұрын
And we all kneel before the master. Your skills are phenomenal!
@woodturner216 жыл бұрын
Thank you for your kind comments
@kevingerald8286 Жыл бұрын
Brilliant to watch a quality production turner at work. Inspirational for us amateurs. Thanks. I have 20 identical spindles to make and your story board with sharp pins will save a load of time. Cheers.
@woodturner21 Жыл бұрын
I’m pleased it helped.
@ianvicedomini2648 Жыл бұрын
Beautifully turned spindles that would look great wherever they're used. Great video mate 👍🏽 👌
@woodturner21 Жыл бұрын
Thank you
@hughes16016 жыл бұрын
A friend asked me to do a copy of a spindle for him last week, it was my first attempt at copy turning freehand and I can assure you it took me a lot longer than 8 minutes, however I was pretty pleased with the result. watching your video I have picked up more techniques and will use them if needed in future, Thanks once again for an excellent tutorial/video. Tommy
@woodturner216 жыл бұрын
Thank you I am pleased you have got some tips
@barrycook46906 жыл бұрын
A pleasure to watch you at work
@woodturner216 жыл бұрын
Thank you Barry
@williambirt9145 ай бұрын
5 minutes to turn this beautiful piece !!!! Wow beautiful artwork woodturner. I hope your teaching this awesome skill to people.
@woodturner215 ай бұрын
Thank you
@woodbineshark6 жыл бұрын
Great video the skew work is amazing. I noticed that your tools a super sharp would really like to see how you sharpen them. Fantastic job. Your the best turner on you tube hands down!
@woodturner216 жыл бұрын
Thank you for those lovely words. I sharpen freehand on an 8" ruby wheel using a slow grinder. I don't hone my skew but do hone the other tools.
@ashleymichney18714 жыл бұрын
Thank you very much for hands on showing me the steps I gone look threw wood crafts videos and how to make tables none show me it’s done step by step make bro because you helped me on dream
@MikeWaldt6 жыл бұрын
Mesmerising video Steve, thoroughly informative and enjoyable once more mate. Cheers Mike
@woodturner216 жыл бұрын
Thanks again Mike
@nandeeshbaradavalli31296 жыл бұрын
Mai working pls Tulls
@bertasoler93756 жыл бұрын
Good job again! Great video. I have had some success turning basswood, poplar, and oak and I LOVE IT. Its now my main hobby, Thanks to you!
@woodturner216 жыл бұрын
Thank you Berta that is great to hear.
@WimpeeChuck5 жыл бұрын
Wow. I wish I could do even one spindle that easily and accurately! I'm learning from videos like yours, though. Thanks!
@woodturner215 жыл бұрын
Thank you I am pleased you are learning from mine and others.
@TheWoodYogi6 жыл бұрын
Thank you Steve :) Lovely to watch as always and some great information gained from it :) ॐ
@woodturner216 жыл бұрын
Thank You
@TurningWorks6 жыл бұрын
Wow! I learn something new every video- it’s great! 🍺🍺👍👍
@woodturner216 жыл бұрын
Thank you Dave
@brycecomerwoodworks15 күн бұрын
Ahhh, the craft is not dead! Nice shape too. Looks like you've turned a couple of those before! 😉
@woodturner2113 күн бұрын
Thank you
@trevorcurry55213 жыл бұрын
What a craftsman,never seen a skew handled with such aplomb!
@woodturner213 жыл бұрын
Thank you
@alanhenry78352 жыл бұрын
Most accurate, most detailed, most crisped !!!!! TURNER ALIVE ! 😊
@woodturner212 жыл бұрын
Thank you Alan
@pablopascual56076 жыл бұрын
thank you very much for sharing. I really appreciate your awsome skills!
@woodturner216 жыл бұрын
Thank you for your comments
@bigun50506 жыл бұрын
Thanks for sharing your video's. I've learned so much watching how you use the skew. I think I just figured out what I'm doing wrong trying to make beads. Wish it would of been closer view but you can't have everything. Thanks again.
@woodturner216 жыл бұрын
Thanks Greg, if you are on Facebook check out my The woodturners page there are a lot of close up videos on there.
@tombaker37943 жыл бұрын
Unbelievable, a master at work.
@woodturner213 жыл бұрын
Thank you
@larover906 жыл бұрын
love watching you turn
@woodturner216 жыл бұрын
Thank you Ian
@peterleffler20626 жыл бұрын
Steve,It's great to hear the man behind the skew - don't be shy, you're a natural!Obviously you need the extractor on but it does interfere with you speaking. I don't know much about the technical aspects of videoing or what equipment you are using, but I know that other KZfaqe's I watch have moved to lapel mikes because it givess clearer sound.I usually just watch again but speaking for myself, I would be quite happy to watch you do one with full commentary and another couple with none or just any extra points that occur to you. I realise that that could get in the way of your work though.Keep em coming!
@woodturner216 жыл бұрын
Thanks Peter, I am sure I could manage a voice over but that would take more time than I seem to have but will try on some future videos if possible, I will continue to show a mixture of types. Thank you for your comments they are appreciated.
@robertwaddicar81653 жыл бұрын
Lovely tutorial how to use skew chisel and spindle gouge practice makes perfection time is money Brill to watch well done
@woodturner213 жыл бұрын
Thank you
@thefish58616 жыл бұрын
Best spindle turner, and skew chisel man on the planet!
@woodturner216 жыл бұрын
WOW! Thank you for that but there are a lot of brilliant turners in the world and many not on the internet.
@williamgrotts12873 жыл бұрын
Now I need to make a storyboard for the 2 pieces I need to replicate. Wonderful idea!
@woodturner213 жыл бұрын
Thank you and enjoy
@gbwildlifeuk82694 жыл бұрын
Fabulous skills, clearly a pro 👍
@woodturner214 жыл бұрын
Thank you
@davidcharleson52416 жыл бұрын
Just mesmerising!!!
@woodturner216 жыл бұрын
Thanks David
@Lostfriar16 жыл бұрын
Very, very good work. You must sleep with you skew....! I like the skew also, and I have learned very much from your videos. Thank you, very much......!
@woodturner216 жыл бұрын
Thanks Tarry, I think it is part of my arm, LOL.
@ThePaulbusby6 жыл бұрын
Great video. Nice to have the commentary. Even after watching I still don't know how you did it so fast. It takes longer to make and drink the first tea of the day
@woodturner216 жыл бұрын
Lol, thank you
@nicooosthoek15026 жыл бұрын
Fantastic, I like your video's
@woodturner216 жыл бұрын
Thank you
@NineteenSeventy0ne6 жыл бұрын
Very interesting, I could watch you work for hours. I take it you set up the height of your lathe 6” higher to compensate for the chips on the floor lol, great vid as always. Pete
@woodturner216 жыл бұрын
LOL! Thank you, I lower the floor. ;)
@danhealy73416 жыл бұрын
Amazing video. Your speed and accuracy cannot be match. Very impressive!
@woodturner216 жыл бұрын
Thank you Dan
@kevincaldwell79756 жыл бұрын
Always a pleasure to watch you work. You asked for comments on the commentary. I thought it was clear and concise explanation of what you were doing.
@woodturner216 жыл бұрын
Thank you Kevin
@husainmedhi66715 жыл бұрын
wood turning
@buzzgreen203 жыл бұрын
another great display!
@woodturner213 жыл бұрын
Thank you
@AllenORourke19546 жыл бұрын
Gasp.... brilliant Steve .....👍👍👍👍
@woodturner216 жыл бұрын
Thank you Allen
@UndeadWarTurnip3 жыл бұрын
How is this possible. This man is a wizard with a lathe.
@woodturner213 жыл бұрын
Thank you
@bassplugger16 жыл бұрын
I sure would like to see you do that on my lathe, and use my skew just so I know it could be done! Amazing to watch you do your stuff
@woodturner216 жыл бұрын
Thank you Tim
@BurtonsAttic6 жыл бұрын
Great work!
@woodturner216 жыл бұрын
Thank you John, and thank you for your message. Regards Steve
@BurtonsAttic6 жыл бұрын
Thanks Steve, you need some more wood chips! Great tip on their use as floor insulation! Take care
@trealexander52712 ай бұрын
Planning to get my own lathe soon and wondering what these spindles are for? Your experience really shows in that efficiency
@woodturner212 ай бұрын
These are for a staircase
@robcpwoodturner2 жыл бұрын
Crazy awesome 👍👍👍
@woodturner212 жыл бұрын
Thank you
@gavjav13 жыл бұрын
brillant steve, love seeing your work on Instagram
@woodturner213 жыл бұрын
Thank you Gavin
@wilwrk4tls2 жыл бұрын
That is definitely impressive! I love your skew work for sure. Can you maybe do a video on tool sharpening? I had no idea buying a lathe would mean becoming a professional tool sharpener- any pointers in that direction would be awesome.
@woodturner212 жыл бұрын
Thank you. I grind freehand so I don’t think my sharpening video helps much. If not confident then I suggest getting a sharpening jig. There are several available but one of the best and value for money is the wolverine. You will need a grinder preferably 8”. facebook.com/TheWoodturners/videos/163641739164608/
@wilwrk4tls2 жыл бұрын
@@woodturner21 I will have to practice up. Do you do any diamond honing or just stick with the grinder? I'm assuming you use a CBN wheel?
@woodturner212 жыл бұрын
I use a CBN 180 and no honing.
@chrisfregoe5613 жыл бұрын
So fast yeah show off!!!! Maybe with a lot more turnings! lol 😝 love it a true master carpenter!
@woodturner213 жыл бұрын
Thank you
@para051006 жыл бұрын
Good job, speed!
@woodturner216 жыл бұрын
Thank you
@hasansyria32206 жыл бұрын
Awesome !
@woodturner216 жыл бұрын
Thank you Hasan
@nazimsaifiartwork4 жыл бұрын
Nice job
@woodturner214 жыл бұрын
Thank you
@yuvallahav6 жыл бұрын
Dang! Is the only word that comes to mind. :)
@woodturner216 жыл бұрын
Thanks Yuval
@ianswindell Жыл бұрын
Brilliant
@woodturner21 Жыл бұрын
Thank you
@PaulLockwood6 жыл бұрын
Simply amazing to watch. I think if you gave me 1000 of them to turn I think you would be hard pressed to find two the same. Out of interest I know you run your lathe at about 1K for most things. Do you find any differences at sanding at that speed? Those with reversible lathes will often sand at slow speed and reverse the lathe every grit. Great job, love watching.
@woodturner216 жыл бұрын
Thanks Paul, these are approx. 1250 rpm and no problem sanding personally don't find much advantage reducing the speed, I have reverse on my lathe but very rarely use it. Even when I am sanding to very fine grits I find little difference.
@processcoordinator1530 Жыл бұрын
www.kuvamtechnologies.com/turning-spindle/
@williamoconnellartisancrafsman2 жыл бұрын
Hi Bob could you advise on skew angles and best type of skew Chisel. Pleasure to watch you.
@woodturner212 жыл бұрын
Who’s Bob? I’m Steve My favourite skew is Ashley Iles 1” flat skew I freehand sharpen and have never measured the angles I just grind to what looks right, however it’s approx 30 degrees included angle and 15 degrees skew
@aaudain16 жыл бұрын
Awesome
@woodturner216 жыл бұрын
Thank you Anthony
@donntisch36510 ай бұрын
After years of driving a semi truck cross country i found that i could quite easily operate the truck in any situation with basically very little thought at all. It had completely become second nature. As i watch you very quickly & expertly maneuver the skew i can only imagine that you probably make these cuts quite automatically? Do you merely tell yourself that you wish to do this or that cut & your body responds without thought? As a complete novice turner, i find making the skew do any maneuver not unlike the first attempts at backing up a 53 ft trailer lol. Painstaking....😮
@woodturner2110 ай бұрын
You are totally correct I make almost all my cuts automatically and second nature and yes it takes a lot of patience and practice
@Max-zl9qi5 жыл бұрын
Could u please send me a Link where you bought the skew? I own a oval skew which is way to short Cheers
Hi Steve cannot believe the speed you produce such beautiful work out I suppose 25 years doing the job helps. You sound like a fellow brummie would I be right ?
@woodturner215 жыл бұрын
Hi thank you, you’re right born in Birmingham and lived all my life on the outskirts of Birmingham all my life. 38 years doing the job and my family woodturners for 300 years. In Birmingham for over 150 of those.
@CountDoucheula2 жыл бұрын
Bro, there's this new thing the kids are using called a vacuum cleaner. You might wanna try one sometime
@woodturner212 жыл бұрын
I do all day every day
@wagWAGart6 жыл бұрын
watching you work is poetry in motion awesome. you need to slow down its over to quick lol.
@woodturner216 жыл бұрын
Lol, Thank you
@user-so4ks5ig7q3 жыл бұрын
💯💯💯👋👋👋
@woodturner213 жыл бұрын
Thank you
@cango5679 Жыл бұрын
real pro
@woodturner21 Жыл бұрын
Thank you
@TheRobinj136 жыл бұрын
Fabulous to watch but you really need a sweep up, mate!! 😉
@woodturner216 жыл бұрын
Thanks Robin, I sweep up at the end of the day (usually) but it keeps my feet warm ;)
@TheRobinj136 жыл бұрын
woodturner21 haha, I love your videos by the way.
@Aliyanticahkreatif5 жыл бұрын
nice3
@woodturner215 жыл бұрын
Thank you
@robohippy3 жыл бұрын
Efficiency is intelligent laziness.... You sure have that part down... Interesting to me is that your skew tends to be ground more straight across than most of what I am used to seeing. Looks like maybe 10 degrees or so. It seems like a lot of people have theirs at 30 to 45 degrees. Any particular reason?
@woodturner213 жыл бұрын
Thank you, basically because I find it far more efficient and easier to remove larger amounts of wood no more than that. The angle is how my Grandad and the family have done it for hundreds of years but generally I don’t think the angle of skew is that important use what’s comfortable. Tool presentation will change that angle to whatever you want.
@sethwarner25406 жыл бұрын
turn the volume up!!
@woodturner216 жыл бұрын
I can’t it’s filmed on my iPhone sorry.
@VSD783 жыл бұрын
Hi Steve, finally i see your face.
@woodturner213 жыл бұрын
Lol!
@VSD783 жыл бұрын
@@woodturner21 yeah. For long time i wish to see the face of the man who has that amazing gift. I have an lathe but your work and your skills, make me to practice and make amazing stuff. Thank you so much
@woodturner213 жыл бұрын
Thank you for the kind words and I’m pleased my videos have helped.
@user-oi3fu4jj4p5 жыл бұрын
отличные формы
@ashokprajapati22613 жыл бұрын
Sir please give idea how can make wood turning tool
@woodturner213 жыл бұрын
Sorry I buy my tools not make them
@ralphhines22933 жыл бұрын
4
@thestutteringwoodturner98243 жыл бұрын
hey i had to subscribe again cause apparently youtube unsubscribed me for some reason
@woodturner213 жыл бұрын
Thank you, KZfaq are a rule unto themselves.
@thestutteringwoodturner98243 жыл бұрын
@@woodturner21 do u have facebook?
@woodturner213 жыл бұрын
Yes The Woodturners
@thestutteringwoodturner98243 жыл бұрын
@@woodturner21 is that your personal facebook?
@woodturner213 жыл бұрын
No that’s my woodturning page
@syedismailzabibulla6836 жыл бұрын
This is my work
@woodturner216 жыл бұрын
No it’s my work
@sethwarner25405 жыл бұрын
Your a good chap, Im sure, and you CERTAINLY know how to turn; but wouldn't it be nicer if we could hear you?
@woodturner215 жыл бұрын
I don’t actually do tutorials but just video work I’m doing and my methods to show how I work as a production turner . I feel if I talk people will then take it as a tutorial and my methods may not be the correct ones for some people also I don’t feel comfortable talking and turning at the same time so it would mean a lot of time to edit a video to add a voice over. This is time I can not afford at the moment. Sorry
@OCDbrand Жыл бұрын
Dude why are you wearing sleeves so close to machine?
@woodturner21 Жыл бұрын
It’s a woodturners smock designed for woodturning with Velcro sleeves