Spitronics ECU 1, fitting onto non VVti 1uz. Would I use one?? Spitronics Review

No video

Spitronics ECU 1, fitting onto non VVti 1uz. Would I use one?? Spitronics Review

Рет қаралды 10,924

Күн бұрын

The Cartune Company (2003) Ltd in New Zealand does 1uz and 3uz conversions / parts and wiring. We have been working on UZ Toyota V8 engines since 2004 when we did our own Hiace van to transport dirtbikes around NZ. Since then we have swapped to doing mainly just Lexus V8 work from a family owned farm hidden away in our paradise , surrounded by the NZ native bush. We sell parts and simple to follow wiring instructions for the 1uzfe engines. For enquiries email info@thecartunecompany.co.nz Take Care. Kelvin

Пікірлер: 55

@baddestburrito4718 3 жыл бұрын

Nobody else is giving out this type of information on the 1UZ. Bravo!!

@CartuneNZ 3 жыл бұрын

Glad to help out. There's a series showing how I wired it coming too but I thought an overview like this was a good place to start.

@PinkuStyle 3 жыл бұрын

I already use one and have been so for over a year. Good results for what it is.

@CartuneNZ 3 жыл бұрын

Excellent feedback. Is it in one of your driftcars?

@PinkuStyle 3 жыл бұрын

@@CartuneNZ It is currently installed inside of a nissan s13 which is currently a nuetual builds which does street driving, drift and time attack well. Recently took it out for suspension testing at a time attack day. Did very well lapping members who had Haltech etc installed . I'm their defense I am a pro driver and they are weekend racers haha. Video here kzfaq.info/get/bejne/bdCdmc1imavMpIU.html

@JC-ft4ri 3 жыл бұрын

Thanks for this video, looking forward to more of these. Liked and subscribed.

@CartuneNZ 3 жыл бұрын

Thanks for the sub! These are starting to roll out now. Cheers Kelvin

@deezy9595 3 жыл бұрын

I'm in South Africa but I really want a Link. Hopefully 2021 shines brighter than this waste of a year and I'll have my one up and running.

@CartuneNZ 3 жыл бұрын

2021 is nearly here. Good luck with your project. Cheers Kelvin

@bvward 3 жыл бұрын

Look forward to the series!

@CartuneNZ 3 жыл бұрын

cool. Ill drop them over the next few weeks. Just realized I missed uploading one too. Cheers Kelvin

@lucaslaban4629 3 жыл бұрын

Thanks for another great video mate!

@CartuneNZ 3 жыл бұрын

Cool as. Glad you liked it. Cheers Kelvin

@kendy531 3 жыл бұрын

Nice love this, I use spitronics Orion

@CartuneNZ 3 жыл бұрын

Theres a series to follow. It can be watched now via the playlist . Cheers Kelvin

@kendy531 3 жыл бұрын

@@CartuneNZ thank you very much

@murrayblair2159 3 жыл бұрын

Look forward to the series

@CartuneNZ 3 жыл бұрын

They are being released now. Cheers Kelvin

@thaakiermaurice7711 2 жыл бұрын

Fuel tech for the win

@CartuneNZ 2 жыл бұрын

I've got a plan to do a fuel tech at some point.

@ryantaylor7988 2 жыл бұрын

The problem I have found as a person wanting to buy one of there products, is there web site is not very descriptive, it dose not list what the unit comes with, or what it don't come with, there are no descriptions of what any of the parts are for, nor are there any photo's of what you get, bit of a leap of faith to order from half way around the world, I wish people would build proper web sites, or there is next to no point in having one, if people can't access all the info they need. looks like it's built by a Computer programmer not someone that understands how people use a website. I emailed support 3-5 times they didn't give me much to go on, in fact it gave me more questions, there Website keeps changing, can someone build them a user friendly website ?.

@CartuneNZ 2 жыл бұрын

As with many products they work as a manufacturer and wholesaler and prefer retail customers head into one of their dealers to talk about the customers requirements. Sounds like you are not from South Africa so there may also be a cultural difference. I'm quite fortunate that I had a very good mate in SA who gave me some contacts which not everyone can have sorry.

@murrayblair2159 3 жыл бұрын

I have their early Venus model and struggled with the mercury and other model, accessing the ecu and software.

@CartuneNZ 3 жыл бұрын

Interesting. Was it gaining access that was the issue or setting it up once in the software?

@juandavila6966 3 жыл бұрын

Sorry to bother but I’m in a really bad need of help

@murrayblair2159 3 жыл бұрын

@@CartuneNZ could access the software but couldn't get it to start

@murrayblair2159 3 жыл бұрын

@@CartuneNZ think it was a bit of both to be honest, the Saturn ecu uses hyperspace and the orion ecu not if i can remember. Pressed for time I sourced Used Venus a got the vehicle going agai. Will follow your videos and try again 🙂

@CartuneNZ 3 жыл бұрын

@@murrayblair2159 I found hyperspace very easy to use and connection quite easy once I sorted a couple of little things. Swapping laptops was interesting but was good downloading and setting up a second communication device. Cheers Kelvin

@pieterhartzer7884 2 жыл бұрын

I have this exact ECU on a non VVTI 1UZ and it's giving me such a hard time. I don't know much about tuning, and is in the middle of nowhere so can't take it in. I don't suppose you have your MAP available as a base for me to start on? I suspect the current MAP was "tuned" by the previous owner who didn't know much about it either. The looms fell apart (wires literally just pulled out with two fingers) which makes me believe that he tried tuning it whilst there were wiring issues.

@CartuneNZ 2 жыл бұрын

Yes, my map is available for purchase if the ecu was not purchased from me.

@pieterhartzer7884 2 жыл бұрын

@@CartuneNZ Thanks, I found a company that will tune it for me for a bit less than your price for the map. Given I have different injectors in I think that's the better option.

@bergadusdreyer5725 2 жыл бұрын

Where are you guys SA??? I'm in NAMIBIA my astina burned its ecu and some told me to replace it with these spittronic??

@CartuneNZ 2 жыл бұрын

We are in New Zealand. Far away from SA

@nzstato 3 жыл бұрын

Choice, will you be looking at retailing these? Is that the factory idle speed control it is able to work with?

@CartuneNZ 3 жыл бұрын

I'm looking at having a few for those guys that want a cheaper option with some backup. I want to make a few looms up between the bigger jobs and a straight plug and play setup , but done properly and tested. Yes that is the factory idle speed control unit and the idle control on these ecus is really nice. Thats one of the outstanding features of the setup. Cheers Kelvin

@dxta7360 3 жыл бұрын

Can you recommend an ECU tuner software like you've? What brands do you use?

@CartuneNZ 3 жыл бұрын

I use and tune lots of link, motec, microtech, haltech, spitronics, megasquirt emtron etc etc etc. Each have their own software, some several different softwares over the years

@ChasingU99 2 жыл бұрын

With the spitronic, can delete de limited of my uz non vvti? He cut in 180 KM/H

@CartuneNZ 2 жыл бұрын

Yes. Cuts can be set where you chose or be turned off

@ChasingU99 2 жыл бұрын

@@CartuneNZ u have some Whatsapp or something the I can talk with yours????

@elariomontoya8683 2 жыл бұрын

Will it work good for turbo 1uzfe applications?

@CartuneNZ 2 жыл бұрын

It will run a turbo fine if set up correctly and a suitable MAP sensor is fitted. Cheers Kelvin

@slicktop2jz855 3 жыл бұрын

What one would you recommend for a high comp big single 2j mate?

@slicktop2jz855 3 жыл бұрын

With vvti

@CartuneNZ 3 жыл бұрын

I'm pretty sure I showed in the last video I don't work on JZ engines , haha. I'm still learning this ecu range but I think they might have the next step up with the mercury which will have sequential injection suitable for a 6 cylinder. Ill see if someone from Spits can add to the discussion. Cheers Kelvin

@slicktop2jz855 3 жыл бұрын

@@CartuneNZ Awesome thanks for the heads up mate

@rickjames3034 3 жыл бұрын

can it do VE based maps or just traditional?

@CartuneNZ 3 жыл бұрын

Not on these, just traditional. For the price they still work well.

@ianthoka3530 Жыл бұрын

I'm in south africa Need to be a dealer n installer

@CartuneNZ Жыл бұрын

Ok. I'm from NZ, they send me ecus without an issue

@jacobs2309 3 жыл бұрын

Do you dislike Haltech?

@CartuneNZ 3 жыл бұрын

I like haltech. They have an awesome range of products atm with great customer support. Cheers Kelvin

@the_JDM_fanatic Жыл бұрын

So I’m in SA, spitronics is pretty shit, hahahahahahahaha but it’s cheap. SA ecus are really not the best at all…. We are very far behind the world in development in ECU SA ecu is like TV games , haltech / link is PS5/XBOX

@dirkdiggler9082 Жыл бұрын

Nothing wrong with Sout African engine managements.People run good times on them when tuned good.We dont have the fuels that America use to get max gains.If you know much about fuel....well a B series N/A runs 8's over there.Nitro methane ftw.