more like Toasted :D

That's really good news! Blueprint handled it really well.

Link is not working For me anyway might repost it 😉

@CleetusMcfarland big fan boys You boys need to invest in breather tanks and catch cans for that combo especially running that setup. Also recommend gettin straight pipes all the way out the back as most burnout have the pipes straight out the back away from the pipes with now mufflers i can send examples via email toddywhitepinkcar@gmail.com

Congrats on there being small beans issues. Toast will toast on. 💯

Victor Lorraine we got it!!

I noticed that too and was wondering if they saw that lol

Was just about too say sumthin lol

In the valley on the left side yup....

Cleetus McFarland well gosh dang ole Cleeter commented...... I’m gonna have to do it for Dale twice as hard this weekend....MURICA!!!

Love tech talk with James

Talking nerdy!! Sorry Jeremy.

James is awesome !! Cleetus attitude i Makes it !

And his serious voice :)

Yesh.

Bubble soap would be more fun.

Speaking of tape I'd recommend using a much thinner tape like packing tape for that application. Good idea though!

@@rexela2101 we used to use saran wrap...super sensitive to any leak....!

1crazy-welder good call my fellow welder !!!

If your tool is leaking you should probably forget about the motor and go see a doctor.

I think that was the whole point of blueprint sending them an engine. Imagine the boardroom meeting okay so we need to test this engine who can we send it to? One of the chairs turns his laptop around to show cleetus blowing up an engine on the Dyno. Everyone in the room: perfect.

@@asjmpickle yeah I bet

He should say that while cradling a NOS bottle in his arm.

There's nothing they can't brake lol

brass gear on the roller cam...??

Ah i just commented that too but u already saw it

There's another piece a few seconds later on the right side, by cylinder 4 I think. Tiny crumb of a piece.

How did they miss that but everyone watching the video seen it hahaha

its probably gonna fall out when they flip the motor over so it shouldnt be that big of a problem

Eagles eye!

SirVic42 love it! That’s how any great headline begins...

Either that or the classic, "local man ruins everything"

still looking for the gator and the crazy meth head gfriend. LOL

Alligator teeth.

Alligators are angry because they have no toothbrush and all them teeth

Nick Johnson yup I saw that too looks like a tooth

El_De_La_Lobo your right

yes and have it blowing in the wind!

Best comment imo

that really should be a sticker

I put the bread in the toaster.... But where does it go from there, and where does this toast come from? 🤔

@@ChuckBeefOG even in the toaster you have to tune that thing just right to get the perfect toast

Chuck Beef did you plug it in?

Baby Cleetus playing with Matchbox versions of all his cars?

@@jacknicholson5794 that actually doesnt sound like a bad idea.

Bogger in training lol. Or a McFarland pit crew shirt bc my daughter likes to come hand me wrenches. N had i brought my camera when i had just put the trd blower on my tundra n was about to give it the beans for the first time she looks over n says "bog deep daddy" it was epic

Agreed

My daughters 5 btw n already a gearhead. First time i stuck her in the passenger seat of my 2012 lex isf n stood on it and came sideways outta my street on the main road i expected her to freak out but when i looked over she was grinning ear to ear n says "why did u stop daddy ,do it again". Proud dad moment

Freddy Garcia Anything to make a $1

That's how continuous improvement works.

Brian Bray On everyone else's dime, you pay them, to advertise for them. In turn they make even more money.

@@Mr.Beastforpresident These guys are living the dream and if it is supported by people buying the swag of their own free will, then I gotta love that.

Kris.Ivanovv I watched that vid too and thought the same thing

Yup

As far as I know Texas speed don't do big blocks otherwise the giraffe would use them.

@Ada 1812 LS and LT

Texas speed wouldn't send me anything to California except stock GM parts because of "laws", but it's funny I can order with any other racing company even in Texas no problem! Their military discount is only half off shipping when other companies usually give free shipping. I was going to order a electrical wiring harness for my 2010 camaro ss with them at full price, and I would of had to ship it to another location out of California, then call the shipping company to have them redirect it to my address before it was sent. I ended up calling PSI directly for their wiring harness that Texas speed sells, and they offered 10% military discount with free shipping to California. Make sure to check out all sponsors websites that Texas speed sells parts for first so you can at least get free shipping, and not deal with the middle man.

@@trentongulley6641 Big companies like Summit and Jegs went through a lot in order to send stuff to Cali, along with money spent. Other companies took longer.

@@trentongulley6641 Did you serve the country for the right reasons or just to get a discount?

You're right. Good eye

Great eye I missed that hopefully they see this comment. And inspect further so clearly didn’t find all the metal

Stephen B They don't reply to comments silly. They just want your ' view ' time and for you to buy some T-Shirts to advertise for them so they can make $,$$$,$$$

6:39?

His count went from 9 to bits from the magnet to 11 12. He blatantly skipped 10.

Robert Goller lots of us out here lol

No miles*

Lessons learned the hard way are lessons ya never forget 😉

Shit son! Try ruining an engine before it’s even in the car!! LOL I forgot to tighten the bolts for an LS oil pump. Only cost me $550 to get the crank fixed, new rod and main bearings, and new head gaskets.

Robert Goller this ain’t no nascar engine

I like the metric

1000rwhp is probably 1200hp at the crank.

@@joshkolden9103 probably more than 1300

It's ment for burnouts and that blower probably takes 2-300 hp to turn over at full song, so I'm guessing just swapping to correctly sized turbos and exhaust it'll make 12-1300hp with out much hassle. Imagine a pair of 88's on there 3000hp wouldn't be an issue if the rods and stuff would hold up. TBH this engine in leeroy and a glide/9inch would be a deep 6 second combo with a couple 88's. Altho at that point I'd question an irs and the chassis integrity.

Its a torque machine man

Now go watch Leroy

@@RTM459 thats what i was gunna say

Avoid the "Mullet the Jet car" videos. It just ends in tears.

You should go back and watch the Leroy series XD

Don't be a copy cat man. Make your own style!

Beings that it's black, burnt toast.

Agreed

Maybe a upside down “hockey stick” pin-striping in that color but hell no to one strip down the center it would look awful

@@HankeyMountainGarage have you seen leroy?

@@ShutErDownBud yes why

@@parma-sean+ Looked like Big Bird's legs. That boy needs to hit the gym and do some leg work.

Jeez, broke a 632 at

Chris Negenman the toaster when winning lol

THIS, GEN 3s SHOULD ALL HAVE REAR LOUVERS!!! Love the look.

CN073 H*** yes, that would look good.

Hell yeah!! All business in the front, party in the back!!!

You people have no taste is styling.

It's a Gen 3. It's style IS louvers.

Correct.. Int. Cyl. #4 was not holding air, NOT #6. Then what he refers to as Cyl. #2, is in reality is Int. Cyl. #8 . "just because someone has $$$$$$$, does NOT mean they have intelligence".

FABRIC8TIONUNLIMITE1 it’s not the serious. They build faster cars than you. Chill

Everyone knows chevy cylinder location. No biggie. Buy a T-shirt and keep watching the channel. Cheaper than building yourself a racecar.

@@FABRIC8TIONUNLIMITE1 Wow found the Troll! Funny never heard of you and guess you be too busy to watch videos...lol! Your just a sissy hater...lol!

Okay you got a click and I see your problem....lol! Yourself learn to play nice boy! This channel is nice to people! You are a fart boy!

List your channel so we can check it out brother.

@@micahbuchheit1283 this is my channel , kzfaq.info/love/d-Xf_G06JzDHHemrIYCXvw

@Phillip Aubin man, as a broke 22 year old dude in the US scraping by with paying rent and high insurance, I would love a 1.2l turd, so much money saved 😭

I wonder if he went to school or if he is self taught.

I like the videos watch the all but come on, unlesss i am totally screwed up, even after pulling the head off correct thereselves as to which hole is numbered what. You pull driver side head off, saying that to make certain of orientation for most, You are dealing with odd numbers on top of that, the front piston is further forward in block whic is easy to see at front of a big block

Hovik Gedjeyan Mechanic knowledge and race knowledge are two different things, you need both

I agree. Very possible the gear on the cam looks just like the distributor.

Yup just looking at the cam from the top is not inspecting it. If the cam gear is sheared that’s even more issues.i would inspect everything. Why take a chance on a 10 grand motor thats never even been driven

They won't. ... until it doesn't work two weeks from now.

No doubt I would pull it apart and check everything it's already out mine as well then throw in on a engine dyno get set up and reinstall it then fine tune it from there

@@STePHeN320_12 It blew my mind that he had a quick glance at the only part of the cam he could see and just said " cam looks good"

Is that just on big blocks?

Randy Brechbiel he’s standing at the back of the block tho. So from his angle and the way he’s pointing towards the front of the block he is correct.

@@buddyturner6969 he pointed at number two and said number 1 then continued to say wrong bank. The first one he pointed at is not 1 it is two. and on and onwith his pointing

billy lennon he said theirs one. Meaning one of the valves that was leaking. Then literally says number 6 intake like 5 seconds later. Also still standing from the back of the block not the front. So even if he was calling it one instead of 2 it would actually be 5 instead of 6 and you would still be wrong, but like I said and he said multiple times valve 6. And again he’s filming from the back of the block not the front.

for a good explaination see: kzfaq.info/get/bejne/mLl6n5N8qK3PoIk.html

Just an idle thought... isn't water thicker than air? And the engine is a massive air pump. So in that case, the water trick won't show all leaks

choelstad91 it is, but it’s still a fluid... so like any fluid it should flow through the least path of resistance.

@@whodahellru8124 true, but since water is thicker than air.. there would be no path

choelstad91 kzfaq.info/get/bejne/odhxq5qEx8zdZYU.html something like this.

Thememelord3726 I like the “we’re on fire!” one better

I have that shirt :-D

Nope. “Do It For ‘Murica” is the best t shirt. Special edition, limited edition Independence Day release. And you know it.

D'vonn, GET THE TABLE

Because they don't for anyone else. This wouldn't even be covered for anyone else but let's say it wasn't your fault. Then they'll send you the valves. You need an approve for the shop making the repair. If you want them to cover it. Which is smart on their part. Don't blame them at all either. This is still what we call special treatment what they did for Garrett. With Garrett having 1.5m subs I don't blame them but don't think for a second everyone gets treated like this. I know for a fact they don't. If it's your fault ( in this case it was) they won't cover the repairs at all. What they're doing for Garrett goes far beyond what anyone else would have got. In this case anyone else would be on their own right now coming out of pocket. Honestly that's more than fair too. A company or builder shouldn't be on the hook for your fuck ups.

@@waynebollentin989 I didn't hear where he said that Blueprint was comping the heads, only that they were swapping heads because it's faster than getting the parts and doing the machine work. Pretty sure they're paying _something_ for this "service"

@@noanoxan so you think if you had this problem under the same circumstances they'd send you a new set of heads? Obviously minus a popular KZfaq channel. You're a complete fool if you do. My point was simply others would have been own their own. I know this from experience. To be clear. I did tell the one owner of the motor at the time. Blueprint shouldn't be responsible because it was his fault the valves bent like in this case. I have also seen them have valvetrain problems because of the parts themselves. Look I don't blame blueprint for doing it. Anyone else in their position would do the same but to think they treat everyone like this is insane. While they have many motors with little to no problems (mostly you show car/ street cars). There's also many that had bad experiences with them when it comes to their motors specially the heads and or valvetrain and having it repaired. I've seen it first hand on more than one occasion. In over ten years I've never once seen this kind gesture for anyone for obvious reasons. Sorry for pointing out the obvious. Unfortunately today we have a ton of gullible people looking at the internet. I sometimes feel like add what some would see as common knowledge. Blueprint is always super nice before you buy a motor or in the comment sections but if you own one of their motors and have a problem the experience is usually much different when dealing with them. In some cases they're not at fault so that's clear. Bottom line like I said before people should know what they're buying. There's a reason these motors are cheaper. Most don't understand that before buying them. See the low price and can't resist. The motor is fine for a street car. Going beyond that well.

I think you'll find that Cleetus has a sponsorship with Blue Print

@@secretsquirrel5439 The answer I was looking for, and not the redundant novel from Smarty McHillbilly: Keyboard Warrior Extraordinaire before you. Thank you!

6:03 might of had something to do with their florida maths.. 7,8,9..11,12

Bucks WoodShop just flex seal that bitch it will b ok

WOuld you please give my youtube channel a Subscribe

Yeah like those 3 valves are toast

I asked my daughter what she wanted for breakfast this morning while getting her ready for school, she said "toast" I instantly thought of this car and said "me too baby girl".

He was standing at the rear of the engine. You could see the water pump was still bolted to the front

And you have it backwards. Odd on passenger and even on driver

@@codymeece7479 are blue print different then chevy motors drivers front is #1

​@@codymeece7479 uh... no.... www.aa1car.com/library/chevy_firing_orders.htm

Chevy V8 is Chevy V8. I've built enough of them.

SolarManMick I was thinking the same thing..The heck with all that pumping!

I had to use a 20 ton bottle jack last night in a pinch---Good Lord that was a lot of pumping!

@cleetusmcfarland. He's right. I see it. And theres one at the front of the valley also.

That's distributor tooth #12. I was yelling at the video "omg there it is, it's right there!"

I see it now

Would you please give my youtube channel a Subscribe

Dave's Racing Channel dude that is so lame. I don’t care if your channel was cooler than this one. I wouldn’t subscribe because you are begging for attention.

The unburnt fuel mixture dosent expand like burnt fuel, so a large amount of fuel remains in the cylinder after the exhaust stroke. Mixture gets richer and richer until it back fires. The force of the backfire can easily bent a intake valve.

Tim Hunter Cool...appreciate the explanation

Topfuel cars have dual ignition systems, that run at 55a each to separate spark plugs. A single misfire will cause the engine to hydrolock because the air fuel ratio is so low with nitro-methane.

@@ionstorm66 This isnt top fuel.

@@ionstorm66 It backfired because they dont know how to install a distributor. This thing will clear cylinders fairly well, it has a high overlap cam under boost, and it doesnt use that much fuel. 90% chance the valves are not bent, it just has a crappy valve job. Once they get a new set of heads, they will find their real problem.

Lol

Bounder With Chris I can see how that could happen

Fetus right?!

Would you please give my youtube channel a Subscribe

I think that was just the light reflecting because they got wet. from a different angle they are brown like the others

petrol or thinners is best for that as it'll sneak around the smaller gaps - but remember petrol is flammable :)

Samuel Hawkins dude give them hell brother cleatus isn’t the sharpest tool

yeah at this point of pulling everything apart its best to just check every nook and cranny.

Neither of them are the greatest. However they try and they have built some damn fast cars... what have you done?

​@@drake_24v_hawkins no one attacked him so stop white knighting. the what have you done is not a good argument, no one cares if someone has built a few cars that go vrooooom. its life thousands are doing what they do.

@@Dockhead I dunno, with this much money at stake, (If I had to buy it) The block would be getting cooked out and bearings, cam and all. But what do I know. I didn't buy it...

I might not be making the same mistake twice but I've got a great imagination!

@@SoulTouchMusic93 lol