How to Install an M4 Street Slayer Slip On Exhaust on a Yamaha YZF-R6 from Sportbiketrackgear.com

No video

How to Install an M4 Street Slayer Slip On Exhaust on a Yamaha YZF-R6 from Sportbiketrackgear.com

Рет қаралды 79,520

Күн бұрын

How to Install an M4 Street Slayer Slip On Exhaust on a Yamaha YZF-R6 06-16
www.sportbiket...
The Street Slayer Slip On Exhaust gives you a much sleeker option than the stock exhaust, with a much more aggressive look and sound. There is also a huge weight savings, especially when paired with the Muffler Box Eliminator Kit, which gives you 3 horse power and saves you 8.5 lbs.
The tools seen in this video can be found at www.sportbiketr...
This install may be more advanced than you're used to because there is fabrication involved. If you feel uncomfortable with this modification please take your bike to a licensed motorcycle mechanic. Stay tuned for more installation videos!
This video is for demonstration purposes, and we are not responsible for any damage you do to your bike.
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
/ sportbiketrackgear
/ stg_moto
/ stg_moto
blog.sportbike...

Пікірлер: 142

@shanghai2058 4 ай бұрын

That exhaust looks so much better and sounds great

@sportbiketrackgear 4 ай бұрын

M4 is our go to exhaust brand here at STG. - Van

@thesolojourney8955 2 жыл бұрын

Your the best! I’m getting my whole R6 build done by myself thanks to all your videos!

@sportbiketrackgear 2 жыл бұрын

You are welcome and thank you for watching! - Van

@OMAR-gl9cp 3 жыл бұрын

Van I love watching your video Each time I watch a video you're doing work on a motorcycle it give me the confident that I can do anything on this motorcycle mechanically I love the mechanical part of the motorcycle and you inspired me it's inspired me to go further on on this journey of repair repairing and fixing motorcycle

@sportbiketrackgear 2 жыл бұрын

Thank you for watching! Happy to hear these have been helpful. - Van

@MrTay675 8 жыл бұрын

now it's ready for the track! *subtle eye roll* I have nothing against two brothers but that new m4 is stunning

@lorentzinvariant7348 5 жыл бұрын

The gold Elvis eye protection really works with this;) Love it!

@teamv1ru5 8 жыл бұрын

Love the r6 videos! thanks bro

@sportbiketrackgear 8 жыл бұрын

+teamv1ru5 No problem! Great bike.

@Nekminute 8 жыл бұрын

1st thing to do after the vid TAKE OUT THAT DB KILLER !!!!!

@StealthyAban 7 жыл бұрын

Is removing the "honeycomb" material inside the stock headers a good or bad idea?

@javisferron2147 6 жыл бұрын

I do enjoy watching all your videos and I will definitely use this method for my 2011 r6. It’s much more cheaper

@sportbiketrackgear 6 жыл бұрын

Thank you for watching! - Brian Van

@nochitright 8 жыл бұрын

That sounds crazy good. Nice work!

@sportbiketrackgear 8 жыл бұрын

+nochitright Thanks!

@dinxsy8069 8 жыл бұрын

DB Killer left in?

@RevBomb 8 жыл бұрын

so detailed love it

@RevBomb 8 жыл бұрын

***** hey

@gixxerboyroyluvdrumswaters9023 6 жыл бұрын

Awesome job.

@Ero-Sennin692 3 жыл бұрын

after reading all the comments here, i can see that a PCV is not totally necessary for newer bikes. what i would like to know is if the OEM fuel management system on a 2009 r6 is adequate enough to compensate for anything after making this modification?

@sportbiketrackgear 3 жыл бұрын

Yes you will not be doing any damage to the bike. Install the exhaust and ride it. If you are happy no need to spend anymore money IMO. - Van

@Cfet2011 7 жыл бұрын

eh Van awsome video as usual. did not see the part where you took off the radiator. I have a 2015 R6 about to do this same project. any advice

@19-Kilo Жыл бұрын

Would this be the same exact process for a 2019 R6?

@gregzav6982 7 жыл бұрын

I can't get the headers to fit back in, I tighten everything going back and forth, but the headers still doesn't fit all the way back in, any suggestion?

@skylermchale6462 7 жыл бұрын

God that sounds beautiful

@sportbiketrackgear 7 жыл бұрын

M4 is one of my personal favorites for sure. - Brian Van

@sackychin6267 5 ай бұрын

Do you need block off plates or anything else when you do this?

@sportbiketrackgear 5 ай бұрын

If you plan to the the ECU flashed then you should also do the block off plates. - Van

@sackychin6267 4 ай бұрын

@@sportbiketrackgearis it necessary to flash the ecu?

@senortaco66 8 жыл бұрын

Quick question Van I installed my Street slayer no problem everything worked out. Although i was told recently that my brake light was not activated by my rear brake anymore due to the new bolt supplied by m4 with the black tube. That bolt was the cause of my issue i was told by Yamaha. Did you guys have the same thing happen? Rear Brakes still work just won't activate brake light.

@sportbiketrackgear 8 жыл бұрын

+R6Eric Give us a call at 888.784.4327 and we can help get you sorted out! Thanks

@edgarvilla6014 7 жыл бұрын

What address en USA

@samueljg29 7 жыл бұрын

Sportbike Track Gear While removing the can, is it necessary to install a power commander?

@kurimania 7 жыл бұрын

I installed the pipe with a toce exahust on my 2017 r6, also s graves servo eliminator, installation went ok , but I have a check engine now, any advice or solution how to turn it off?

@LazyPanda10 5 жыл бұрын

Does removing the muffler box and using the y pipe throw a check engine light? Plugging the o2 back in of course.

@sportbiketrackgear 5 жыл бұрын

To keep the check engine light off you will need to install a exhaust servo eliminator after removing the servo motor. Here is a link to one on our site: www.sportbiketrackgear.com/skutrnet-yamaha-yzf-r6-02-17-exhaust-servo-buddy/ - Van

@nicksanfratello5695 3 жыл бұрын

Is exhaust smell from headers normal after install? I have a bit of carbon build up around port 3 also put in brand new gaskets Any help would be appreciated I don’t want to damage anything bike sounds sick now

@sportbiketrackgear 3 жыл бұрын

It will smell a bit which is totally normal. Keep your eye on the carbon at the head. If it does not get any worse you can leave it. If the install is all good it will most likely seal up on it's own. - Van

@gersonescobar2842 3 жыл бұрын

Can you give me a list of what tools to get I want to get this same exhaust and mid pipe and want to do it myself

@sportbiketrackgear 3 жыл бұрын

Sorry we shot this a long time ago and I do not remember all the tools I used. You can get this done with common metric tools. Allen wrenches, wrenches, sockets, etc... - Van

@kylianmeulen5487 5 жыл бұрын

Do you need a powercomander with other mapping then stock? Of can you run (stock headers + m4 midpipe + slipon) with stock maping? And did it runs to lean then, so that is damage your engine?

@tbOO9 4 жыл бұрын

You don't need to remap anything. Just make sure you have the O2 sensor plugged in, and the computer will adjust the fueling (thank you fuel injection!) for you. I did it on my 2006 Yamaha R6 track bike (totally stock motor) and it gained like 2-3 horsepower, re-using the STOCK exhaust can.

@cliffordboucard5119 7 жыл бұрын

is their anything else I could put on my with out having to cut cs my bike is still on warranty

@daria_morgandorffer5768 2 жыл бұрын

Serious question, what’s wrong with Two Brothers?

@sportbiketrackgear 2 жыл бұрын

Nothing, they actually make a really nice product. They do not do much for track riders or racing, mostly focused on the street riders. - Van

@grafitodorado 8 жыл бұрын

suena genial!!!

@QAnyui 8 жыл бұрын

Is the headers actually rusty or just changing colour from the heat?

@buggstuntz96 8 жыл бұрын

Probably mostly dirt baking on.

@soldierschristus 3 жыл бұрын

Where did u get that mid pipe? All the mid pipes I see online are larger and fit only when u cut the larger area of the header.

@sportbiketrackgear 3 жыл бұрын

M4 Yamaha YZF-R6 06-20 Muffler Box Eliminator Kit www.sportbiketrackgear.com/m4-yamaha-yzf-r6-06-17-muffler-box-eliminator-kit/ M4 Yamaha YZF-R6 06-20 Street Slayer Slip On w/Muffler Box Eliminator www.sportbiketrackgear.com/m4-yamaha-yzf-r6-06-17-street-slayer-slip-on-w-muffler-box-eliminator/

@MrSunnybrar 3 жыл бұрын

You can also get it through amazon

@drew1759 5 жыл бұрын

Hey! So after you sawed off the CAT box from the two collector pipes on the headers, did you have to decat the collector pipes as well? Was there a honeycomb mesh type material in the collectors or were they already open and clear like you show in the video? Thanks!

@sportbiketrackgear 5 жыл бұрын

Man we did this a while ago but I do not believe there is any additional honeycomb in the pipes. I remember it all being in the muffler box that is removed. The bike we used in this video is the previous gen R6. - Van

@drew1759 5 жыл бұрын

Thanks brother! I actually completed it this weekend. Did exactly this using the mid-pipe and added an SC project CRT slipon. Not only is the sound music to my ears, but surprisingly my performance increases a lot more than I expected! Thanks for the help 💪🏼

@craigyoder6756 4 жыл бұрын

@@drew1759 max did you remove the honeycomb/mesh from the pipe?

@craigyoder6756 4 жыл бұрын

@@drew1759 what year is the bike you worked on? yeah that would be great!! I'm going to be currently working on a 2006 and i watched another video and a gentleman had the mesh, so i was curious.

@norbertoortiz7045 5 жыл бұрын

Did you took out the baffles inside the tube ????

@XhanSoccerChannel 5 жыл бұрын

Please help. Just need to know what size t-handle was used to take out the stock clamp bolt out?

@sportbiketrackgear 5 жыл бұрын

Man this is a pretty old video, I think it was either a 5 or 6mm. I would suggest picking up a nice t handle set with a full range of sizes for working on the bike. - Van

@XhanSoccerChannel 5 жыл бұрын

Sportbike Track Gear Ok thanks! I’ve tried a 5, 5.5 and 6mm hex key on my 07 R6 bolt and none of them work!

@joewinters2491 3 жыл бұрын

Did you guys remove the “honeycombs” inside the headers?

@sportbiketrackgear 3 жыл бұрын

No we did not modify the header any further. - Van

@brianhaygood183 3 жыл бұрын

As a guy who ended up with a scar in his cornea from a piece of metal coming off a grinder, yes, please wear eye protection. Even if it has to be Elvis glasses you'd obviously never wear anywhere else.

@sportbiketrackgear 3 жыл бұрын

I have been wrenching on stuff for well over 34 years, many of them professionally. If I feel the need to wear eye protection I do. That said we all need to make our own choices. - Van

@nwjt 3 жыл бұрын

Is a baseline unrestricted map from FlashTune good enough to run this?

@sportbiketrackgear 3 жыл бұрын

That map is 100% good enough for this system. - Van

@Victic005 8 жыл бұрын

Why would she took out the Two Brothers exhaust to put the stock back on? I think the Two Brothers is better than the M4.

@SweezyGKP 5 жыл бұрын

Quang Lam So squiddy tho

@crashoverride456 2 жыл бұрын

What kind of grease did you use to hold in gaskets?

@sportbiketrackgear 2 жыл бұрын

That is just some of the Mobil 1 grease I had in the shop. Any common grease will work fine when trying to hold the gaskets in place. - Van

@cliffordboucard5119 7 жыл бұрын

Hey van reply plz I need your opinion on this

@fabriciobuschittari6551 5 жыл бұрын

hi, question, when you were tithening the header,, did you say to DOUBLE the torque specs????

@sportbiketrackgear 5 жыл бұрын

NEVER DOUBLE THE TORQUE SPECS! Pretty sure I said double check your torque. - Van

@fabriciobuschittari6551 5 жыл бұрын

@@sportbiketrackgear is in the minute 19:16... but i thought it was weird to say that... thanks for the answer!!!! great videos!!!!!

@Jordan-wp8xi 3 жыл бұрын

@@fabriciobuschittari6551 He said "Google the torque specs"

@javisferron2147 4 жыл бұрын

Hey Brian, is it possible for me to ship my 2011 r6 to so you can do the exact same thing to my bike. ?

@sportbiketrackgear 4 жыл бұрын

Sorry we do not offer any service here at the shop. - Van

@javisferron2147 4 жыл бұрын

Sportbike Track Gear I understand and I love your videos and I watch them everyday

@user-mh5nq8qo9j 5 жыл бұрын

I ordered a m4 muffler. Does it include a drawing? Blueprint?

@sportbiketrackgear 5 жыл бұрын

It will come with instructions and a schematic showing all the parts included in the kit. - Van

@krqkan 8 жыл бұрын

loving the bike look! @Sportbike Track Gear One question. what's the name of the tail in the intro clip? the blue track bike. :)

@HowardNChauncey 3 жыл бұрын

Do you think I can get two M4 exhaust on a Yamaha FJR1300 2008?

@sportbiketrackgear 3 жыл бұрын

Sorry M4 does not have a system for the FJR1300. - Van

@HowardNChauncey 3 жыл бұрын

@@sportbiketrackgear do you think the m4 slip ons would fit

@tylerlaursen7530 6 жыл бұрын

Will a differnt slip on work with that? My slip on has a stock fit for the 06 r6. O and will i need get a power Commander and get my bike re mapped

@sportbiketrackgear 6 жыл бұрын

Tyler you can install the M4 R6 Muffler Box Eliminator with pretty much any slip on that fits the bike. Below is a link to the eliminator: www.sportbiketrackgear.com/m4-yamaha-yzf-r6-06-17-muffler-box-eliminator-kit/ You should remap the bike at some point or install a fuel controller. It does not have to be done immediately, it will need to be done to get the maximum benefit from the exhaust mod. - Brian Van

@davidleyva4115 8 жыл бұрын

I just found this video will this be the same process on 2015/2016 r6?

@sportbiketrackgear 8 жыл бұрын

It will be very similar!

@shiftwraps 6 жыл бұрын

Fits 2017?

@sportbiketrackgear 6 жыл бұрын

Yes the M4 Yamaha YZF-R6 06-18 Street Slayer Slip On w/Muffler Box Eliminator will fit your 17 Yamaha R6. Here is a link to it on our site: www.sportbiketrackgear.com/m4-yamaha-yzf-r6-06-17-street-slayer-slip-on-w-muffler-box-eliminator/ - Brian Van

@jaytotheray7942 3 жыл бұрын

Is this quieter then a full system??

@sportbiketrackgear 3 жыл бұрын

No I would say this is a little louder as the can is pretty short as compared to some of the full system mufflers. - Van

@jaytotheray7942 3 жыл бұрын

Sportbike Track Gear I was thinking factory headers with the honeycombs left inside would balance out the fact that the exhaust can is shorter or is that a negligible difference not worth noting?

@zackland4959 5 жыл бұрын

Will it shoot fire though ?

@sportbiketrackgear 5 жыл бұрын

Under the right conditions it will shoot some flames if that is important to you my man.

@khanhle1504 5 жыл бұрын

Question: Do u need flash ECU or PCV on 2018 R6 ? Thanks

@sportbiketrackgear 5 жыл бұрын

You do not have to in order to run this system, the OEM fuel management will work just fine. I would ride the bike after installing the system and riding the bike to see how you feel about the performance. If you are happy with it then leave it alone and save the money. - Brian Van

@khanhle1504 5 жыл бұрын

Sportbike Track Gear thanks for quick answer Brian 👍🏻

@talhakamis9787 6 жыл бұрын

Can I use this Exhaust in Germany. Because I live in Germany and I would like to have this exhaust

@sportbiketrackgear 6 жыл бұрын

I am not familiar with the emission laws in Germany. Wish I had a better answer for you. - Van

@andreas.s9996 4 жыл бұрын

Is this street legal in germany?

@sportbiketrackgear 4 жыл бұрын

Sorry I am not familiar with German regulations. - Van

@abdullahsayeed7857 8 жыл бұрын

Can you use any kind of grease for the gaskets.

@sportbiketrackgear 8 жыл бұрын

Any kind of multi-purpose grease available on our site!

@SweezyGKP 5 жыл бұрын

QUICK QUESTION! Do I need power commander or ECU flash if I do this?

@sportbiketrackgear 5 жыл бұрын

You do not HAVE TO install a fuel controller of flash the ECU with this. We have installed several full and 3/4 systems on project bikes and ridden them for extended periods of time without fuel controllers. Installing this will eliminate the exhaust servo motor which will turn on the check engine light. To turn that off you can install a SkutrNet Yamaha YZF-R6 02-18 Exhaust Servo Buddy. Here is a link to that on our site: www.sportbiketrackgear.com/skutrnet-yamaha-yzf-r6-02-17-exhaust-servo-buddy/ - Van

@Mtj622 4 жыл бұрын

The muffler box eliminator is not a cat delete right?

@sportbiketrackgear 4 жыл бұрын

Yes this removes the CAT. - Van

@brianhaygood183 3 жыл бұрын

There are some cats up in the two pipes he installed the y-pipe on. Most people hog those out while doing the y-pipe.

@Catersnow76 8 жыл бұрын

is it still really loud with the dp killer in

@jasonmckinney2332 6 жыл бұрын

It’s not ass deep with out it.

@user-mh5nq8qo9j 5 жыл бұрын

How many this bike decibel?

@sportbiketrackgear 5 жыл бұрын

I do not have the numbers on the dB level for this system, I will tell you it is not a quiet system. It comes with a noise insert installed and they offer an optional Stage 2 insert that quiet the system by 1-2 dB more than the Stage 1 it comes with. Below are links for the system and the insert: www.sportbiketrackgear.com/m4-yamaha-yzf-r6-06-17-street-slayer-slip-on-w-muffler-box-eliminator/ www.sportbiketrackgear.com/m4-exhaust-quiet-insert-db-reducer/ - Brian Van

@user-mh5nq8qo9j 5 жыл бұрын

Sportbike Track Gear Is the same with the 18 year r6?

@rekrapgysot858 8 жыл бұрын

I want her bike so bad.

@claudiocut 7 жыл бұрын

Out of curiosity, after cutting the header/muffler box can i fit another slip-on on the mid pipe if i want the change the m4 slip on in the future?

@alpha6five528 8 жыл бұрын

Van , I never got my shirt ! 2014 r1

@PaulWall874 8 жыл бұрын

+sportbiketrackgear what oil are you running in your 2015 R1?

@buggstuntz96 8 жыл бұрын

Probably motul

@sportbiketrackgear 8 жыл бұрын

+Paul4186 Motul 300V for the win!

@sportbiketrackgear 8 жыл бұрын

VERY highly. lol

@brianhaygood183 3 жыл бұрын

If the friends you ride with make fun of your exhaust, get new friends. Unless your exhaust is Toce, in which case, Bahahahahahahaahahahahaaaa.

@sportbiketrackgear 3 жыл бұрын

LOL

@alpha6five528 8 жыл бұрын

I do believe Van runs Motul oil

@sportbiketrackgear 8 жыл бұрын

+R1 Wolf Love the stuff!

@frankplastini5303 8 жыл бұрын

Will I need to do a power commander after this install? 2014 R6

@sportbiketrackgear 8 жыл бұрын

Not essential to keep the bike healthy, but to really take advantage of the power you will want to get a fuel controller for sure :)

@playingfor4 8 жыл бұрын

What if you just open up the CAT and emty whats inside it ? And dont you need to remap the bike to make the engine run optimaly ?

@sportbiketrackgear 8 жыл бұрын

Using the CAT eliminator and Slip-on is the cleanest way to make the modification. It would be a ton of work to remove the filter material from the inside of the CAT. If you are looking for the peak performance of your motorcycle you would want to use a fuel controller with an auto-tune system, or have your ECU re-mapped. Thanks for watching!

@playingfor4 8 жыл бұрын

I know the cleanest way to do it. But i live in Denmark and the police are strick here :( If they see my bike without a CAT i will be in trouble. So thats why i wanna know if i can emty my CAT and get the sound a Y pipe will give :) ?

@sportbiketrackgear 8 жыл бұрын

No idea, I have never done that. It could make it sound better, or the extra space in the exhaust system might make your bike run terrible. Wish I could be more help with this one.

@playingfor4 8 жыл бұрын

Yeah, i dont think it has been done before but i was also thinking about building the Y pipe inside the CAT, should be possible just dont know if i can do it myself. I really love the YZF R6 but sound means alot to me as well. I might just end up going with a GSXR 2006-07 since the CAT is inside the exhaust as i hear in the comments, so just slip on will do the trick.

@brianhaygood183 3 жыл бұрын

@@playingfor4 That sounds like it would work. Check with a welder to see what they would charge to put it back together in case you decide you aren't up for it. Shouldn't be much if you do all the cutting and fitting and they just have to run the weld around it. Even less if you tack it in place.

@jshaglr9 8 жыл бұрын

What's wrong with two brothers???!!!! I have it on my ninja !

@cstephenson9223 8 жыл бұрын

I know right!!!!! I know lots of people that have or have had 2br on their bikes! It sounds badass on my 2014 honda vfr 800! The 2br carbon pipe makes my bike sound like a small block v8 and I have gotten lots of compliments:)

@cstephenson9223 8 жыл бұрын

Joshua Aguilar the comment above was meant for you! And my honda vfr is a v4 too, so the two brothers sounded the best to me on my bike:)