www.bonfire.com/store/ecltd/ I got some demon axles & 2" lift spacers for my 2018 Polaris Sportsman 570! really happy with the results! some riding videos soon to come!
Пікірлер: 65
@thearkansasoutdoorsman15783 жыл бұрын
I accidentally watched a 20 minute video about an atv I don't own. But you did an incredible job walking through the process. I like the way the tusk spring compressor worked. Seemed high quality
@EvanCaron3 жыл бұрын
Thanks for watching!! yeah the tusk puller works great!
@mitchellmcneill58673 жыл бұрын
Great video man! A perfect example of a tutorial! And what to buy for the sketchy springs😅😂
@bullionbouncer50803 жыл бұрын
Damn good video, high quality step by step walk through! Saved to my 570 maintenance playlist!
@brennan39073 жыл бұрын
he's literally one of the ONLY you tubers who don't just sit around and talk and actually works on it
@EvanCaron3 жыл бұрын
really appreciate that! il have to get some more install videos up!
@MrFullThrottle3 ай бұрын
Demon is the way to go! 💪🏼
@jaycourvoisier12813 жыл бұрын
Such a great quality video!
@DemonPowersports3 жыл бұрын
Great Video, Thanks for the support!! :)
@o8xszil3 жыл бұрын
i did back springs swapped for the heavy duty springs from an x2 model. those were scary to compress with a car spring tool, and they were like 160 cad delivered. i got that and the 2 inch bolt on for the strut. very back heavy now, hills are sketchy with a passenger
@bullionbouncer50803 жыл бұрын
Man that rear springspacer gave you just as much pain as the HL springs I installed
@EvanCaron3 жыл бұрын
it was not fun haha
@huntenbambi2 жыл бұрын
Hey Evan great work on this video! I wanted to ask how the lift/axles held up after a good years worth of time? I just did the lift on my '21 570 and snapped my rear axle on the second ride turning 26" mayhems so trying to determine if the Demons are better or just remove the lift
@EvanCaron2 жыл бұрын
These demons are still as tight as they were new, no issues! Thanks for watching
@concealit48003 жыл бұрын
Also u will have to grind the top of you strut housing on the front or ur goin to tear ur outer front axle boots
@bullionbouncer50803 жыл бұрын
Wish I would have had that style shock compressor when I put the highlifter springs on mine the Harbor Freight ones got in the way and made it a terrible experience lmfao
@EvanCaron3 жыл бұрын
i can imagine haha, i looked at quite a few compressors before going with this Tusk.
@collinpavelin1393 жыл бұрын
Where did you buy the lift? I’m running the same quad on 27x9s and I rub a little with the kid on the back. I have highlifter springs to go in but I’m worried they will eventually sag and I’ll be in the same boat...
@EvanCaron3 жыл бұрын
its all just eBay stuff. 2" full lift was like $30 cad ( i didn't use the rear lift as it is too much angle ) and the 2" spring spacer lift was about $24 cad delivered. i would have gone with the highlifter or epi hd springs but huge price difference. will probably sell this atv off in 2 years and upgrade anyways. there a ton of fun!
@kellenmasters40583 жыл бұрын
How did you get the from a arms off?
@aldorivera72283 жыл бұрын
Great video bud how are them demon axels holding up?
@EvanCaron3 жыл бұрын
no issues yet! still very tight. going out again this weekend so will put them to the test again. watch my two newest ride videos, i beat them pretty hard haha!
@joseares243 жыл бұрын
How much did you pay for the Cv axles
@stevenpainter5373 жыл бұрын
Did those tires rub on the tie rod end without the wheel spacers?
@EvanCaron3 жыл бұрын
Nope, probably around 1/2” of clearance still with these itp rims, no issues
@concealit48003 жыл бұрын
Better watch axle cup temps it will get the seals in rear diff hot and blow them been there
@EvanCaron3 жыл бұрын
will do. no issues yet!
@travisboots92633 жыл бұрын
So do those spring spacers actually lift it? So you actually have 4inches of lift on the front? With the spring spacers and lift kit that was already on it. I’m wondering because the way mines set up dont have the type of spring that takes the strut mount lift
@EvanCaron3 жыл бұрын
100% 4” lift if the front from stock in the front, backs good with just 2”
@travisboots92633 жыл бұрын
@@EvanCaron awsome thanks. Just ordered mine!
@bullionbouncer50803 жыл бұрын
Did you already have that inside edge of the strut ground down?
@EvanCaron3 жыл бұрын
i don't know anything about that? iv heard of having to grind something on the strut with forward A-arms but?
@shawnsturgeon10143 жыл бұрын
So my question is.. if I install 2” lift, is it hard on axles? I watch one video saying axles would explode but didn’t explain why
@EvanCaron3 жыл бұрын
Its definitely harder on axles than stock, the more angle the harder it is! Also depends on the rider and how much its abused haha.
@TheM4J0RT0M3 жыл бұрын
What’s the purpose of the spring spacer? To stiffen up the ride?
@EvanCaron3 жыл бұрын
M4J0R T0M stiffens and gives approx 2” lift. Better option is HD springs, either Highlifter or EPI but was going to cost about $500 cad to get them, spacers were about $25 for similar results
@concealit48003 жыл бұрын
An u will also have problems with axle popping out of rear diff because ur suspension will be at full droop all the time
@EvanCaron3 жыл бұрын
conceal it no issues yet! Watch my two newest ride videos!
@CH-qy5sn3 жыл бұрын
I've had my lift on for 2 years with no issues
@bradleymcclamrock87373 жыл бұрын
What size tires you running?
@EvanCaron3 жыл бұрын
28's
@gshew67692 жыл бұрын
How crappy did the rear ride? Those spares give no actual lift, just stiff suspension.
@EvanCaron2 жыл бұрын
Spring tension sets ride height.. has no effect on how the shocks operate lol, you can clearly see the atv sits higher after they are installed. You are right that its not “actual lift”, they just get rid of spring sag and top out the shocks. Does ride stiffer than stock since they literally make the springs constantly compressed but not that noticeable in my opinion, would do spacers again
@happy00719823 жыл бұрын
Hey sir, I just bought a 2021 Polaris Sportsman 570. I’ve been on it for about a month and find that it sags on me pretty good. About 2-2 1/2 inches. We do a lot of rock climbing and dirt hill climbs. I’m about 315 lbs. What would you recommend to eliminate the sag? Besides not being a fat boy. lol. Thank you, sir.
@happy00719823 жыл бұрын
Great explanatory video by the way. 👍🏼
@darrenhicks943 жыл бұрын
Any rubbing in the front?
@EvanCaron3 жыл бұрын
Zero!
@evanbousquet58473 жыл бұрын
So you have a 2” lift and the 2” spring spacers?
@EvanCaron3 жыл бұрын
Yes but NO REAR LIFT!
@curtisvanbelois21233 жыл бұрын
@@EvanCaron why is that please explain
@EvanCaron3 жыл бұрын
@@curtisvanbelois2123 puts rear axles on too much angle, they wont last at all no matter the brand.
@curtisvanbelois21233 жыл бұрын
@@EvanCaron so I'm building a "570R" and I'm almost done what brand rear spring spacers are you using ? ( my 570 makes 65 crank hp )
@EvanCaron3 жыл бұрын
@@curtisvanbelois2123 brand shouldn’t matter! I think almost all “spring spacer” lift kits are the same. Its just aluminum tubing cut in sections. But id just go on Ebay or Amazon and search sportsman 570 lift, search lowest price and BUY 👍🏼
@shawn62012 жыл бұрын
what size tires are on it
@EvanCaron2 жыл бұрын
28x9x12
@kevinhounslow12223 жыл бұрын
How stiff is the ride ?
@EvanCaron3 жыл бұрын
i don't think its really much different than stock.
@kevinhounslow12223 жыл бұрын
@@EvanCaron awesome thanks
@mohammadjamaluddin57273 жыл бұрын
11
@juanbarron10813 жыл бұрын
I did this it rides like shit had to take it off was killing my back
@EvanCaron3 жыл бұрын
Does kill ride quality, i stand up alot though so my knees are taking most of it
@minnesotanice369 Жыл бұрын
what's the total cost for parts
@EvanCaron22 күн бұрын
hard to say, I got with discount.
@southernSuperSport3 жыл бұрын
Why you put them in the front it kills the ride
@EvanCaron3 жыл бұрын
does some. stand up and let the knees and back take it hahah