Spray booth and Compressor Review 10/5/2023

Рет қаралды 1,729

9 ай бұрын

You can look up both the the Airgoo compressor and the T Togush Airbrush Spray Booth on Amazon. The model number for the spray booth is B07W4KRFF5. Airgoo is also the manufacturer and dealer for Timbertech products and the model number for the compressor is AG-426.

Пікірлер: 72

@seamybmw 9 ай бұрын

Nice set up Larry pretty much the same as my compressor 👍

@LarrysModelShop 9 ай бұрын

Thanks!! I did so much research, my eyes were watering! I had tried a tankless Timbertech, but it created too much moisture and the tank really negates that problem. That's how I know Airgoo makes Timbertech.

@gadlodepaint 6 ай бұрын

Thank you very much, your video helped me decide to make the purchase.

@LarrysModelShop 6 ай бұрын

I'm glad I could help and I hope you have great luck with that compressor. Mine has worked great.

@Mannysscalemodeling 9 ай бұрын

Awesome Larry! I like that compressor, and the paint booth is sweet!! I have those brain farts all the time, i think in every video ive done lol.

@LarrysModelShop 9 ай бұрын

Thanks Manny! I did so much research and learned that many of the compressors are the same just with a different name. The one I bought I had only found two that looked like this one. It works well.

@Mannysscalemodeling 9 ай бұрын

Your welcome! I hear ya, it has a nice size tank on it too. Awesome man. @@LarrysModelShop

@DreamBigBuildSmall 9 ай бұрын

The setup looks great! Hope you don't mind if I steal some ideas from you. Have a great weekend, Cory

@LarrysModelShop 9 ай бұрын

Thanks! I don't consider it stealing. I share with the hopes that it helps someone else. It's all good if it helps you with your modeling adventures. You have a great weekend too Cory!!

@bigkeg9173 9 ай бұрын

This was very helpful 👍 I'm looking at getting something similar 😊 10:46

@LarrysModelShop 9 ай бұрын

Thanks! I'm glad it was helpful to you. It is a really good compressor and I'm very happy with this purchase.

@JethrosGarage-op4bo 9 ай бұрын

Good info Larry, looks like a nice setup! Good luck with your indoor painting!

@LarrysModelShop 9 ай бұрын

Thank you very much! I'll be trying a test spray here pretty soon.

@dacuzzz6951 9 ай бұрын

hello Larry.... looks like you got yourself a couple of great deals.. i know how it is being on a fixed income... it seems we use the same brand air brushes...i just bought a new compressor also... my old one is very noisey... thx 4 sharing.. vinny

@LarrysModelShop 9 ай бұрын

Thanks Vinny! I really like the Paasche H. It's not given me one problem. Usually, it's operator error if something is wrong. I still want to get that Neoeco working, but we'll see. Can't have a noisy compressor in the house. Lol.

@INeeDMyGarageTime 9 ай бұрын

Also Thank You for your years of Service May God Bless you 🇺🇸

@LarrysModelShop 9 ай бұрын

Thank you so much for that!!

@ramblers69 9 ай бұрын

Nice compressor Larry!!

@LarrysModelShop 9 ай бұрын

With all the research I did on compressors, I appreciate it, Tom. It works well.

@gavinbooth 9 ай бұрын

Good set up Larry you will really benefit being in that warm room this winter , enjoy the weekend marra . Regards Gav.

@LarrysModelShop 9 ай бұрын

Thank you very much Gavin! Have a great weekend my friend!

@TerryWilsonModels 9 ай бұрын

Great stuff Larry!!!! I bought my point zero off Amazon two years ago. No issues.

@LarrysModelShop 9 ай бұрын

Thanks! I was looking at Point Zero and narrowed it down to that, Timbertech and the Airgoo. All seemed to be good. Master was rated well, but some of the reviews weren't very good and they cost more.

@Glock-1 4 ай бұрын

Yeah that compressor is definitely a copy of the No Name Cool Tooty and they are great compressors I got mine on sale from SprayGunner for like $107 or $117 and I am blown away how great it is and quiet!

@LarrysModelShop 4 ай бұрын

Yep, this is a great compressor and I love it too. Could not beat that price either.

@modelcars2978 9 ай бұрын

Thanks for sharing.🤓👍

@LarrysModelShop 9 ай бұрын

Thanks for stopping by and taking a look!!

@bigcharliesmodelgarage296 9 ай бұрын

Very nice setup.😊 Thanks for sharing 😊

@LarrysModelShop 9 ай бұрын

Thank you for visiting and leaving a great comment!!

@sodakmodelcars 9 ай бұрын

Looks like you have a nice setup coming together. At some point I should add a compressor with a tank. My Iwata compressor is on demand and works good for the majority it would be nice to have some extra volume to like blow things off or with 0.5 needle it can struggle, 80% of my work is done with 0.3. The NeoEco sounds exactly like the one I got, it will spray fine for about a min and then I waste 20-30min cleaning and trying to get up and running again. Problem with low cost is low quality control and roll of the dice, some have good luck and I've wasted more by going cheap than if I would've gone for $100 brush. Is what it is. Nice intro and have a good one Larry

@LarrysModelShop 9 ай бұрын

Thanks Adam! The tank is nice and this compressor will let me use up to a 0.7 needle. There is also no pulse from this compressor and it's so quite, I can take into the house and not worry about bothering anyone. I really like the Paasche H, it's a work horse and it does not have a "needle" per say. It has three adapters one .02, .038, and .050. I have had zero problems with it. I'm really unhappy with the Neoeco, it seemed to work well for a while, now not so much.

@LarrysModelShop 9 ай бұрын

Thanks for noticing the intro part of my video. I finally got my butt in gear and made one.

@JeffDonahueScaleModeling 9 ай бұрын

Hi Larry, You have a great compressor and spray booth there. I like the idea of having the cooling fans on the compressor to keep the heat down. Your spray booth is a really nice size. You will get a lot of use out of both of them. Just a tip. You may already know this, but if you run your vacuum over the filters in your booth once in a while, they will last a lot longer. Thanks for sharing. Have a great day. Jeff

@LarrysModelShop 9 ай бұрын

Thank you Jeff. That tip with the vacuum makes sense and will be something I will definitely look into doing. Thanks for that!!

@Bubbasmodelcarshop 9 ай бұрын

Cool setup Larry. I build my spray booth. I bought the compressior with the 3 airbrushes off amazon. They work good for me . I am retired with back problems so i am on a fixed income like you sir. so we have to watch our penny's lol.

@LarrysModelShop 9 ай бұрын

Thanks Mike! Yeah, I built a spray booth, but it just didn't work how I needed it to. I really need to figure out my cheap airbrush because it sprayed good for a little while. Anyway, thank you for stopping by. Take care!!

@INeeDMyGarageTime 9 ай бұрын

Nice set up.. i jusr brought a pop up privacy tent to paint in

@LarrysModelShop 9 ай бұрын

Thanks. That sounds like an interesting idea. You must have great weather all the time.

@olezippi 9 ай бұрын

Nice spray booth and air compressor setup. That spray booth Looks like the one I bought some time back. I routed my exhaust straight up through the ceiling in the garage.

@LarrysModelShop 9 ай бұрын

Yeah, I saw that's how you had yours setup. I wanted to keep mine more portable so I can move it from the garage to my other work bench in the house. It gets way too cold here in the winter and I want to see if it will work out inside. Of course, I still have to vent it out through a window so we'll see how that works.

@ronstewart9792 9 ай бұрын

Great review of both units Larry. Great video, Ron

@LarrysModelShop 9 ай бұрын

Thank you Ron. I'm scatterbrained at times. Sometimes I feel I should have a script, but then think it's more fun just going off the cuff! 😜

@islandrc-duke1972 9 ай бұрын

nice spray booth and compressor,great review

@LarrysModelShop 9 ай бұрын

Thanks! I feel fortunate to have both. I appreciate your great comments.

@kyledehartsscaleworks 9 ай бұрын

Nice booth and compressor setup. I love how quiet that thing is. My compressor is way too loud so I really like that.

@LarrysModelShop 9 ай бұрын

Thanks! Yeah, the hotdog compressor I started out with is around 90 decibels and the Airgoo compressor is around 57 or so. Huge difference. That hotdog would make me jump when it kicked on. I'm very happy with both products.

@kyledehartsscaleworks 9 ай бұрын

@@LarrysModelShop that’s how my compressor is. I haven’t measured the db but it startled me every time it kicks on. Guaranteed jump scare. 😂

@TheModelingHermit 9 ай бұрын

Nice compressor and booth. I have a booth close to that one, and the only thing that I would like to see improved, is the width. I wish mine was about six inches wider. Yours looks wider, and I may have to upgrade.

@LarrysModelShop 9 ай бұрын

Thank you. This booth is about 21 3/4 inches edge to edge. If you look at Amazon, try the warehouse. Things can be cheaper there as I got this spray booth $75.00 cheaper at $100.00. Have a great weekend!!

@TheModelingHermit 9 ай бұрын

@@LarrysModelShop I got off of your video and went to check Amazon Warehouse out, and found a very nice one for $176.00 that I think I may get. Thanks for the tip.

@SmallADVentures1973 9 ай бұрын

Great looking setup 😁✌️

@LarrysModelShop 9 ай бұрын

Thank you very much! 🤙

@thebeardedguyjefflawless5887 9 ай бұрын

Nice setup Larry

@LarrysModelShop 9 ай бұрын

Thanks Jeff! Appreciate it!

@anyblunder6782 9 ай бұрын

I used to have a Revell compressor which was really bad. I’ve got an Iwata now. Really small and really quiet. You do need to sell a kidney to buy one though, but it’s great. I’m Dutch, but I haven’t heard of this over here.

@LarrysModelShop 9 ай бұрын

Yeah, I had not heard of them either. It seems they are from the Netherlands. At least that's where the address they have on their web page is located. That was what I was looking for though, small, quiet, and with a tank.

@anyblunder6782 9 ай бұрын

It looks great, mind you, the Netherlands have very favorable tax laws for companies. So it might be that their offices are here but the products are made elsewhere. The important thing is you’re happy with it though.

@LarrysModelShop 9 ай бұрын

@@anyblunder6782 Thanks. Yeah, it fits my needs making me happy with it.

@ScaleModelCarBuilder 9 ай бұрын

Great set up, curious what you put in the bucket that you are venting the booth to.

@LarrysModelShop 9 ай бұрын

Thank you. The small bucket has the insulation from a cheap furnace filter. It really doesn't do anything. It was connected to my old home made spray booth and was just a convenient place to put the hose.

@ScaleModelCarBuilder 9 ай бұрын

@@LarrysModelShop awesome, thanks for the info. I have been thinking about how I can better filter my paint booth inside so I can paint a little in winter months without opening windows.

@LarrysModelShop 9 ай бұрын

@@ScaleModelCarBuilderI would think it depends on the type of paint you spray. Acrylics are pretty safe, the stronger stuff you might need to have like some sort of charcoal filter at the end of your exhaust tube. I spray acrylic paints with the Tamiya Acrylics being the strongest. I won't use any rattle cans in the house either. That stuff in my little plastic container will not help. I've been wondering how I'm going to put my vent out of the window during winter, so I'll see how that works.

@43rocket 12 күн бұрын

how long you get from full air tank for no sound spraying???

@LarrysModelShop 12 күн бұрын

That tank fills up in about 40 seconds or so. The compressor will kick on as the tank is used, but that compressor is super quiet.

@43rocket 12 күн бұрын

@@LarrysModelShop but how long to get with tank full for spraying time without piston pulsing??

@LarrysModelShop 12 күн бұрын

@@43rocket That tank fills up in about 40 seconds or so.

@43rocket 11 күн бұрын

@@LarrysModelShop No wanted to know how much spray time you get on full tank of air???

@LarrysModelShop 11 күн бұрын

@@43rocket Oh. It takes about 20 seconds at 20 psi before the compressor kicks back on. At 20 psi it takes 1 minute and a half of steady spraying before the tank starts to lose that 20 psi.

@greyowl9295 9 ай бұрын

I ask is this better than timbertech

@greyowl9295 9 ай бұрын

seriously thanx, as I'm about to start, but was surfing n researching

@LarrysModelShop 9 ай бұрын

You know, the Timbertech was the one that I was comparing this one too. At $9.00 more, I felt this one was worth it. They are both sold through Airgoo. The one I bought has a fan on the head of the cylinder and a flexible hose from the compressor to the tank. Those two things I felt were worth the small extra cost. The rigid tube can rattle loose as it has no give like the flex hose has. Other than those things, they are very comparable and i don't think you can go wrong with either one.

@greyowl9295 9 ай бұрын

your so correct 9.00 more 2 fans same company, I've been researching for days glad I didn't give up, yhanx dude