SPRAY CHROME, Spray Gun Build Tutorial, DIY Double Nozzle Spray Gun

No video

SPRAY CHROME, Spray Gun Build Tutorial, DIY Double Nozzle Spray Gun

Рет қаралды 12,590

3 жыл бұрын

If you are getting into spray on chrome silver plaiting; here's a step by step build of the double nozzle spray gun used for two-part silver plating. This will allow you to get a chrome finish on your lures using two-part silver plating. My old gun was getting a bit worn and I had some requests for a build tutorial so, here's the whole process. #spraychrome #spraysilver #silverplating
This is an older video that became corrupted and would not play so, instead of dealing with KZfaq tech support, I decided to delete the old one and reload the video file.
All the videos in this channel are for entertainment and not intended as technical instruction. If you attempt to recreate the work or use the techniques seen on the Engineered Angler KZfaq Channel, you do so at your own risk.
Source for the plating materials: angelgilding.c...
/ engineeredangler
www.instagram....
/ engineered-angler-9424...
/ @engineeredangler

Пікірлер: 62

@davesenor3146 8 ай бұрын

Thanks so much for sharing your knowledge. Very nice video!!

@esekbun3626 2 жыл бұрын

Amazing.... Clear explanation, and very creative way of thinking. You are mcGyver in real life...

@EngineeredAngler 2 жыл бұрын

Thanks! 😃

@wasntPete 3 жыл бұрын

Well done for explaining how to make this with stuff that is easy to get.

@maitrisuthar2002 Жыл бұрын

Superb idea sir

@EngineeredAngler Жыл бұрын

Thanks

@hankvana2149 3 жыл бұрын

NICE! Thanks for sharing the build and calibration details! A battery tray eh? Had to laugh, I to have a large "good for something" box of miscellaneous stuff (my wife calls it "junk" :) ) waiting to be re-purposed into some project. Probably 5-6 cutting boards in the box - like you have mentioned a couple of times, they're great for many things!

@thewarpsyrhead 3 жыл бұрын

Larry Dahlberg would approve of this

@rodolfomora9259 11 ай бұрын

Thanks for the video. You are a genius.

@EngineeredAngler 11 ай бұрын

I appreciate that!

@joes7674 9 ай бұрын

Thank you so much for making this tutorial. I'm going to try and put one together.

@EngineeredAngler 9 ай бұрын

Have fun!

@helicopterjohns 3 жыл бұрын

Nice Project. Looks like it works like a champ. Thanks for sharing.

@secretswimbaits1813 2 жыл бұрын

Unbelievably cool man.. you’re an innovator!! awesome work! 🤙🎣

@EngineeredAngler 2 жыл бұрын

Thank you

@ancienttechnology7337 3 жыл бұрын

I really like your spray silver videos, you've inspired me to try it.

@Xray4858 3 жыл бұрын

Excellent , well done and I finally got the video to work. I have a task now to build my chrome gun. thanks

@EngineeredAngler 3 жыл бұрын

I'm glad...I had To delete the original and upload it load it again

@mvm3897 Жыл бұрын

Great tutorial. I've been wanting to use spray chrome in my painting business but have avoided it due to the cost.

@MAGNUSDRONES 3 жыл бұрын

Nice build and thanks for the details. Very informative 👍👍

@RaymondHeath-sy9ik Жыл бұрын

Great job on gun

@lureup9973 3 жыл бұрын

Outstanding!...I just love your stuff!...I’ll be building one soon!

@omie150687 2 жыл бұрын

Nice.. Love u bro, I got solution for cheap tools, proud of U

@EngineeredAngler 2 жыл бұрын

Great 👍

@dhealwayzmiwall3817 2 жыл бұрын

Thanks from Indonesia

@joehall5487 3 жыл бұрын

You are n inspiration...but you are insane! LOL! WOW! Wish I had the time to do something like this

@EngineeredAngler 3 жыл бұрын

You can do it!

@stevenreep385 3 жыл бұрын

Seems like that’s in my reach. I was a little scared of it to begin with but I might try this

@wongsukri 2 жыл бұрын

Nice & creative idea 👍👍👍

@EngineeredAngler 2 жыл бұрын

Thank you! Cheers!

@testtest7191 Жыл бұрын

How can I paint chrome? I have a double head spray gun.Which materials ?

@bryanschauer5867 2 ай бұрын

Do you think having the red tubes 90° at the nozzle tip is more effective than say 80° coming from the red tubes? Any tricks to prevent acid burn or streaks? I’ve been told it’s better to use a tiny bit more silver solution than reducer prevent the white streak burns. Red powdered rouge on a cotton ball very lightly massaged on acid burns will remove the milky burn streaks. Any other tips would be greatly appreciated!! Awesome job making your videos!!❤

@bryanschauer5867 2 ай бұрын

Does the insertion length of the red tubes into the tip make a big performance difference? You can also dilute the chemicals if it’s helpful in particular applications. Angel Gilding has a new formulation that reduces the chances of burns that will be made public soon. I just got some and I’m eager to see if there’s an improvement. Thanks again for being so AWESOME!! 👏🏼 ❤

@EngineeredAngler 2 ай бұрын

I played around with the angle...90 is best. The most touchy part is not putting to much on...it starts to go black. Flaming the surface before is key.

@ronredington2253 3 жыл бұрын

Would you mind if I stayed at your place for a while? I’ll sleep in the shop 🤪 Good stuff as always!

@EngineeredAngler 3 жыл бұрын

I'll set up a bunk...🤣

@rajkumarsahoo131 Жыл бұрын

Can anyone explain about full detail about hydro chrome chemical

@paulbowkunowicz6960 2 жыл бұрын

where can I buy the silver plate chemicals.....

@fishingdevotion8277 3 жыл бұрын

Great video thanks for the tips! Do you reckon spray chroming lures would give a shinier effect than electro plating lures ?

@EngineeredAngler 3 жыл бұрын

While silver is slightly more reflective than chrome, the big benefit is that it is much easier. Electroplating is much more difficult.

@juanpabloliesa5973 3 жыл бұрын

muy buena idea

@EngineeredAngler 3 жыл бұрын

Gracias

@SylvesterPereira36 9 ай бұрын

Im gonna make one this week. Thanks alot...... As soon as i laquer a silvered object it turns yellowish/light gold, is this a common issue? How can i fix this?

@EngineeredAngler 9 ай бұрын

You can't use laquer. I recommend you use two part automotive clear coat and tint it slightly with violet resin dye. Check out the tutorials on AngelGilding.com

@ncoutdooradventures6148 2 жыл бұрын

I've seen several of your videos but only recently subscribed,, but I've been really impressed with your instruction, and theory. But I have a couple questions,,, Have you heard of the AllClad metal sprays, or tried them? And, for your saltwater Lures,, do you use any wire leader ahead of the Lures?

@EngineeredAngler 2 жыл бұрын

I have not tried AllClad. I only use wire leaders when I'm trolling in deep water

@MrAlexpescador 3 жыл бұрын

Great video. I am a follower from México. Is there another way to get the pieces of casting resin ? I didnt really get the idea. Thanks for sharing!!!!

@EngineeredAngler 3 жыл бұрын

Any piece of plastic will do...as long as you can and drill it...

@MrAlexpescador 3 жыл бұрын

@@EngineeredAngler Got it. Thanks for answering !

@caiteacailo6270 6 ай бұрын

Waiting A2 video please 🥺

@jevonplog4699 Жыл бұрын

Nice Build! Wondering where you got the original kit from? thanks

@EngineeredAngler Жыл бұрын

it came from a website that is no longer around.

@jacobfindlay24 2 жыл бұрын

Hi can I use normal plastic bottles with hoses from suction pump spray bottles instead of the suction airbrush pots?

@EngineeredAngler 2 жыл бұрын

You can use just about any bottle but the larger the bottle The greater the risk of waste and possible contamination of a big volume.

@pedroclkpuente1155 Жыл бұрын

Hola como hiciste la pistola grande?

@EngineeredAngler Жыл бұрын

Esa fue comprada

@rockymendusa7867 2 жыл бұрын

Hi sir....may i know do you use a basecoat or varnish as a base coat so that the chrome liquid can stick to the varnish/basecoat?

@EngineeredAngler 2 жыл бұрын

No...I only use one coat of clear epoxy as a base and apply the silver to that.

@rockymendusa7867 2 жыл бұрын

@@EngineeredAngler thanks for answering sir 🙏🙏🙏

@jarodbrenneman8661 3 жыл бұрын

Hello I wanna to ask you if a can use normal bearings for the spinning mechanism of a certerping style reel. It just I wanna make my own reel for fishing.

@EngineeredAngler 3 жыл бұрын

Yes you can, but you should try to get stainless or even better, ceramic. They are smoother and longer lasting.

@jarodbrenneman8661 3 жыл бұрын

@@EngineeredAngler ok but I wanna know if I can use other thing for the spinning mechanism?