Spraying Upol Raptor bedliner on the floor of a 2012 Jeep Rubicon

No video

Spraying Upol Raptor bedliner on the floor of a 2012 Jeep Rubicon

Рет қаралды 13,800

Күн бұрын

This video is for my Jeep people. Im finally getting around and helping my friend Scooby out. Hes been waiting to put this bed liner on the floors of his Jeep for a while now. Trail season is coming up we need to get some protection down on his floors before we tear them up this year with our muddy shoes. If you have noticed you havent seen my Jeep in a while i explain all that too. Dont worry its not sold. I still have it.. enjoy the video!
Dont forget to help support by SUBSCRIBING!! @Matt Pratt
also pick up some merch, represent the HUSTLE cause it WORX!
shop.spreadshi...
#jeep #rubicon #raptorliner

Пікірлер: 57

@Winch_Offroad 4 жыл бұрын

I Line-Xed my entire body of my Jeep. I need to put it on my channel I think. I SUBSCRIBED too.

@mattFNpratt 4 жыл бұрын

That's awesome. I have a samurai project sitting around here that I am close to doing the same. My friend wasn't ready for that yet haha.

@CheritheChef 4 жыл бұрын

Hi Matt! Sending my husband over to your channel as well, he loves this stuff! ❤️

@mattFNpratt 4 жыл бұрын

Thanks you!

@AnglinTexas 3 жыл бұрын

Awesome idea using the paint scraper.

@mattFNpratt 3 жыл бұрын

Have to thank my buddy for that idea....and in the hot summer it doesnt work to well lol

@WilsonZoneOK Жыл бұрын

That paint scraper on the sawzall is a great idea! I'm getting ready to paint Raptor bed liner in my Jeep. I tried just a scraper but most of that sound deadener won't come up. Then I remembered your video, so I bought a cheap sawzall and paint scraper to get that stuff off. Thanks for the idea! I'll let you know how it went for me.

@mattFNpratt Жыл бұрын

That's awesome dude! Keep me posted

@WilsonZoneOK Жыл бұрын

I tried the sawzall, and the paint scraper kept popping out. I ended up using a wire wheel to get the sound deadening off below the back seat. It was such a pain that I didn't bother doing it in the front. I'll just sand it flat.

@mattFNpratt Жыл бұрын

@@WilsonZoneOK That is a bummer. Depending on the temperature outside depends on how easy it comes up.... Now some people go to the grocery store and grab a bag of dry ice and harden that stuff up using the dry ice and then it chips away pretty easy. But it's just bed liner just hammer on a heavy coat over top of it and you won't even notice it

@mustangjunk6013 4 жыл бұрын

Turned out awesome! Love his corners and tail lights

@mattFNpratt 4 жыл бұрын

Thanks! Those corner lights you have to butcher the Jeep...I won't forget that day. Scoob was scared as hell lol

@Rockyjeeper 3 жыл бұрын

That saws all hack is an awesome idea!!!

@mattFNpratt 3 жыл бұрын

Right?! Cheap attachment from homedepo and your good to go lol. Works great for other things too...around the house lol

@Rockyjeeper 3 жыл бұрын

@@mattFNpratt Love how Something Simple saves time and money. Keep up the cool video’s bro! Hate to see what my 08 looks like under the carpet lol

@mattFNpratt 3 жыл бұрын

@@Rockyjeeper haha same! Well tear it out, scuff it up and bed line it! Any questions just hit me up.

@robinsimmons2934 3 жыл бұрын

After all that stuff comes up there is like a layer of just residue that it leaves behind. A wire wheel wouldn't take it off on mine so I took a spray bottle and just hit it with a little water and the wire wheel rips right thru it once its wet.

@SugarShane79 4 жыл бұрын

Great video. Doing research to line my JK tub. Garcias.

@mattFNpratt 4 жыл бұрын

Thanks!

@Marcelo-qk8gj 4 жыл бұрын

Came out nice been man I been wanting to do the same to mine for a while now. Make sure you do a rush creek video if you head out there.

@mattFNpratt 4 жыл бұрын

Spraying was easy you should do it for sure. And yes, I'm definitely hoping to have a few rousch Creek videos this year. You can bet on that.

@AndreeBZ 4 жыл бұрын

Awesome content man. Have you considered doing the whole Jeep? I’m pretty sure it would look great! I have a JL that most likely get lined down the road. Keep up the good work. BTW, where are you guys located?

@mattFNpratt 4 жыл бұрын

Thanks you! And yea I definitely have considered it. I have a samurai waiting in the wings to be worked on and I think we might spray that a colored bed liner. This samurai is going to be a trail only rig so it's going to need it. KZfaq is tough I'm hanging in there lol. And we are located right outside Baltimore MD. How about you?

@AndreeBZ 4 жыл бұрын

Matt Pratt That would be quite the project. If it happens, I’m looking forward to it! I had one of those Suzukis when I was a teenager...I really loved that little car... I figured you were in the east coast, the shots outside the shop give you away. I’m in MD as well, near Gaithersburg. Stay safe and healthy bro, maybe I will pull the trigger on that raptor liner once this craziness is over.

@jasonallen6836 3 жыл бұрын

What did you put on your fenders for that edge??? that looks great. I have used door trim, but this looks AMAZING! the bedliner looks great too! want to do this badly... :) someday.

@mattFNpratt 3 жыл бұрын

Thanks!!! And if your talking about the metal fenders and the black edge.....it's actually Bedliner also. We put that stuff on everything that takes a beating.

@jasonallen6836 3 жыл бұрын

@@mattFNpratt ohhhhh. I thought they were cut plastic fenders with an edging put on...

@mattFNpratt 3 жыл бұрын

@@jasonallen6836 that's not a bad idea, and just replace them as you hit stuff with them

@jstans01 4 жыл бұрын

Any comments on how it deadens sound and/or how does it clean up? AND you mentioned Rausch Creek, are you nearby? I'm in DE and love Rausch and AAOA!

@mattFNpratt 4 жыл бұрын

It's a little more quiet...but still has a hallow sound? But not a tin can sound.... If that makes sense lol...

@mattFNpratt 4 жыл бұрын

And dude I'm in MD! Soon I have a little off road project I'm going to start. And rausch is where I'm going to test it out.

@mattFNpratt 4 жыл бұрын

That sounds awesome! Maybe shoot me an email and I'll swing up that way when you do. hustleworxmd@gmail.com

@jstans01 4 жыл бұрын

@@mattFNpratt Will do! This video has got me planning to try this. I reached out to local Rhino/Line-X shops for quotes and passed out. I'll hit you up for tips and tricks for sure!

@lynnverheugen2910 2 жыл бұрын

Looks great, my question is does anyone ever to tis to the back of the carpeted area on the back seats? I have a JEEP dog and 2019 sahara, dog hair everywere!

@mattFNpratt 2 жыл бұрын

Yeah we did the back seat area in this one... Of course we don't have any carpet down at all but instead of having shiny paint that your jeep dog would scratch up we have the bed liner down which doesn't show scratches as much and probably easier to vacuum hair up. So probably a good idea for your dog!

@lynnverheugen2910 2 жыл бұрын

@@mattFNpratt Thanks Matt, I have a liner on the rest of the jeep "areas" just not on the back of the back seats, which are carpeted. PITA for dog hair

@joserivera7786 2 ай бұрын

Does it work for temperature control inside the cabin?

@mattFNpratt 2 ай бұрын

I'm sure any extra layers or coatings can help a bit. But they do have better options for temperature control if that's what your aiming at.

@sarahschweickart1050 4 жыл бұрын

Did you use any raptor primers like the Epoxy one or the acid etch?

@mattFNpratt 4 жыл бұрын

I didnt use that brand specifically...but its always best to use an epoxy primer or acid etch over your bare metal. If I did I probably used a spray can version of acid etch from the company Kent. Thays usually what i have around my shop.

@jacobmurphy6310 4 жыл бұрын

Hey man I’m in Anne Arundel County and looking to raptor line the inside of my Jku. Any chance you could help out with the job? I could pay you to help out. Just don’t have the space or tools to do it myself. Let me know brotha! Stay safe.

@mattFNpratt 4 жыл бұрын

For sure. Dm me on my ig @hustleworx and we can go from there.

@Captain_Zero_ 4 жыл бұрын

Grinding Trans? bet its a NSG370. Mine in my 05 is a little... sloppy.

@mattFNpratt 4 жыл бұрын

I have an 03 Wrangler...it's in my earlier videos...and it has the nv3550...grinds all the time. I just put an ax15 in it(vid will be out soon) for temporary untill I get the other trans rebuilt. But yea most jeep trans just plain suck lol

@Captain_Zero_ 4 жыл бұрын

@@mattFNpratt yeah, I saw that after I posted. Mine grinds a little, but it is not bad. Hope I dont ever need to rebuild it.

@mattFNpratt 4 жыл бұрын

Lol ax15 trans get stuck in gear, nv3550 synchros are made of playdoh and sounds like your trans was built in a sand storm....why jeep? Lol

@samcasey7899 4 жыл бұрын

I have a 2009 and plan on doing this but how do you hide the wires in the front once the carpet is gone?

@mattFNpratt 4 жыл бұрын

We just ran them under and around the trim down the side, also cleaned them up a bit wrapping them in fresh wire loom. Try it and let me know how it works out.

@jstans01 4 жыл бұрын

@@mattFNpratt what were the loom sizes you used through the vehicle?

@jkustockaphobia2421 4 жыл бұрын

Why do u wanna get an older trans vs re-build the one u have

@mattFNpratt 4 жыл бұрын

The older ax15 trans don't have a synro issue as bad as the newer nv3550. The ax15 does have other issues but I can deal with. The nv3550 trans can be rebuild but they say you can rebuild them and they still end up grinding later down the road. But I'm having issues finding an older trans so rebuilding might be my only route and just see how many miles I can get out of it....