How To Repair Rust On A Car With Fiberglass & Spray Foam Without Welding

No video

How To Repair Rust On A Car With Fiberglass & Spray Foam Without Welding - Vinyl Top Rust Repair

Рет қаралды 120,016

Күн бұрын

Please watch my latest video here: "How To Fiberglass Door Panels / Speaker Pods - Outrageous Bondi Beach Box Chevy Caprice Brougham"
• How To Fiberglass Door...
-~-
Visit : spraywaycustom... for New & Used Spray Guns and Parts.
Support Channel : cash.app/$Spra...
Box Chevy Owner Channel - @87ChevyCaprice
Vinyl Top Rust Repair. Complete step by step process of repairing a rusted out area on the 1987 Box Chevy Caprice LS Brougham without welding using spray foam and fiberglass. This video is for all the DIYers who trying to do it on a budget who may not have access to a welder are the skills to weld. This process will last as long as your car if done the right way. Any questions feel free to ask....SprayWayCustoms
#RustRepair #SprayWayCustoms #BoxChevy #HowToRepairRustOnACar
1987 Box Chevy Caprice LS Brougham Project - Complete Playlist : • 1987 Box Chevy Caprice...
1987 Box Chevy Caprice LS Brougham & 1984 Cutlass Supreme G-Body Projects - • 1987 Box Chevy Caprice...
Box Chevy Caprice Vinyl Top Removal / How To Remove LS Brougham Quarter Top - • Box Chevy Caprice Viny...
How To Repair Rust On A Car Without Welding With Fiberglass/Box Chevy Caprice Vinyl Top Rust Repair - • How To Repair Rust On ...
Bodywork And Primer For Paint / Box Chevy Caprice LS Brougham Project Update - • Bodywork And Primer Fo...
How To Prep & Paint Car Hood & Trunk Lid Jambs / Tri Stage Pearl / Box Chevy Caprice LS Brougham - • How To Prep & Paint Ca...
How To Install A Sunroof Moonroof Box Chevy Caprice Step By Step DIY Sunroof Installation - • How To Install A Sunro...
Auto Bodywork Rust Repair And Primer For Paint / Box Chevy Caprice LS Brougham Project Update - • Auto Bodywork Rust Rep...
How To Paint Car Door Jambs On Box Chevy Caprice LS Brougham With TAMCO HC-2104 Euro Clear - • How To Paint Car Door ...
Bodywork Primer & Paint - Box Chevy Caprice LS Brougham Project Update - • Bodywork Primer & Pain...
How To Paint A Car At Home - Box Chevy Caprice LS Brougham - Three Stage Pearl Step by Step DIY - • How To Paint A Car At ...
How To Cut And Buff - Wet Sand To Remove Paint Runs & Orange Peel In Clear Coat - Box Chevy Caprice - • How To Cut And Buff - ...
How To Smoke Tint Tail Lights - Box Chevy Caprice LS Brougham - Restore Opera Lights Corner Marker - • How To Smoke Tint Tail...
Vinyl Top Replacement Box Chevy Caprice / How To Replace LS Brougham Quarter Top with Canvas Cloth - • Vinyl Top Replacement ...
How To Pinstripe A Car - Box Chevy Caprice LS Brougham - Installing Vinyl Pinstripe & Side Molding - • How To Pinstripe A Car...
Third Brake Light Install Box Chevy Caprice LS Brougham Or Any Old School Car Or Truck G-BODY / DONK - • Third Brake Light Inst...
Headliner Replacement Install From Scratch After Sunroof Installation In A Classic Car BOX CHEVY - • Headliner Replacement ...
Box Chevy Caprice LS Brougham Project Build- PAINT JOB, SUNROOF, HEADLINER, QUARTER TOP, PINSTRIPE - • Box Chevy Caprice LS B...
Box Chevy Caprice LS Brougham On 26s Rucci Guwap Project Build - 3 Stage Pearl Paint Job & Sunroof - • Box Chevy Caprice LS B...
#SprayWayCustoms #BoxChevyCaprice #BoxChevyOn26s #BoxChevyBuild #BoxChevyProject #RucciGuwap

Пікірлер: 1 600

@AFO1 Жыл бұрын

I remember watching that video and reading those comments. Looking at how bad that roof was rotted, you can understand why some people were skeptical. But the proof that you knew exactly what you were doing is seeing how it looks today. You nailed it and it's fixed permanently. Happy Birthday.

@SprayWayCustoms Жыл бұрын

Thanks man 👍

@frankcourtney8039 Жыл бұрын

Is your shop in Decatur? What is your contact information?

@j.a.r.family2576 Жыл бұрын

I'm in Decatur too.

@dougj.8288 Жыл бұрын

@ Edward Walsh I wouldn’t say permanently but, I will accept fixed on a budget. Any moister that gets in there will eventually be an even bigger headache, especially when you don’t neutralize the rust that was already there.

@AFO1 Жыл бұрын

@@dougj.8288 Did you watch the video? He did neutralize the rust. And the closed cell foam he used is water proof. I seriously doubt moisture can/will ever get in there given the way that he packed it in. There may be other problems in other areas of the roof down the road but I think this particular area will be fine. Would a metal repair or a roof replacement have been better? Sure, if you have the dough.

@robertappleyard7053 Жыл бұрын

The man has more talent one handed holding a phone than I ever will. I appreciate the budget approach with premium skill.

@SprayWayCustoms Жыл бұрын

Thanks Rob 😂😂

@josephwilliams8985 Жыл бұрын

All I can say is... THANK YOU! You make videos for those who may not have a high dollar budget. Professionals are mad because you are showing hacks that not only save thousands of dollars, but allows us to learn new skills at home! Thanks man!!!

@SprayWayCustoms Жыл бұрын

Thanks for supporting Joseph

@doughanawalt7736 6 ай бұрын

I just bought an old 71 Dodge. former boogie van that's showing its age with a lot of rust. I am planning on doing body work for the first time with fiberglass. This is the best video I've seen yet. No nonsense, no blah, blah, blah, just straight usefulness. Subscribed.

@SMOOTH30511 6 ай бұрын

Yeah, this is the best one

@tonysmith302 4 ай бұрын

If you can't do the job right then do it at all. Fiberglass and bondo will npt hold up you will have a lot more work when you have to redo it.

@rackbar17 16 күн бұрын

@@tonysmith302how will he know if he can do it if he never try?

@wmajaji Жыл бұрын

Dude after watching your OG video i repaired my leaking and rusted roof on my Mercedes S430. Up until now no rust nor leaks. Bravo to you

@SprayWayCustoms Жыл бұрын

Great…thanks for the support…glad I could be help to you

@Buckswoodshop Жыл бұрын

This man can repair anything AND show you how its done! 👍👍

@SprayWayCustoms Жыл бұрын

Thanks for all the support Matt

@onceagain9128 Жыл бұрын

Hope you had a good B-Day OG

@badcommentbot8349 Жыл бұрын

Repair lol ,more like hidden

@alleycatcapone6163 Жыл бұрын

@@SprayWayCustoms where you located at bro? Have you look at my car

@1andonlySUPAFLY Жыл бұрын

@@badcommentbot8349 Show us your video if you can do better then 🤡

@focused313 Жыл бұрын

One problem is that some of us have never tried something, yet we want tell someone else what won't work. We are just repeating what we've heard and seen, but we don't have real world experience. The value of this is in the results and I wish you had even more videos like this proving that there are multiple ways to do things in this car stuff.

@SprayWayCustoms Жыл бұрын

Thanks, I really appreciate your support

@bryanhayward1967 Жыл бұрын

You're an inspiration for so many people. Keep up the great my brother. I'm 55 years old and had to give up my dream of doing what you do but now I'm hoping in the next couple years I can start doing again what I love. It's been 30 years since I had a small single bay to work out of and boy I miss it. May GOD continue to bless you!

@SprayWayCustoms Жыл бұрын

Thanks for all the support Bryan

@pacbaby Жыл бұрын

Never too late bro I’m 24 and I just stumbled across this video and I think I love this stuff maybe you can teach me I’ll buy all the equipment

@Whoisddepew Жыл бұрын

Bro I got nothing but respect for you. Only another body repair dude can understand what you do. Real talk ! 💪

@SprayWayCustoms Жыл бұрын

Thanks man

@Godisundefeated Жыл бұрын

That video proof never lies. Your work should not be questioned at all. If they didn't know well they now know. 💯💪🏾🔥

@SprayWayCustoms Жыл бұрын

Yes indeed. I appreciate you King 👑

@MrG732 Жыл бұрын

Awesome work as usual. You really show people how to do it them selves. Great job man. Keep it up

@SprayWayCustoms Жыл бұрын

Thanks MrG732

@Spaethon 9 ай бұрын

I have a 99 Mirage with roof rusting in 15+ areas throughout and I got the spray foam already, rustoleum spray, grinder, strip discs, and just need a couple other items. Just on here looking for a good budget DIY way to repair. I'm using this video for my project. Thank you!!!

@lloydbaker6988 Жыл бұрын

🎉🎉HAPPY BIRTHDAY SPRAYWAY 🍰🍰👍

@SprayWayCustoms Жыл бұрын

Thanks Lloyd

@danmarley2926 Жыл бұрын

@@SprayWayCustoms Happy Birthday Spray! 🎈🙏🏿💯 Wishing you many more, blessings

@ericbriggs5828 Жыл бұрын

Happy solar return Spray Dub! I gotta video of me trying to take paint off the hood of my Cadillac. Man I'm struggling. Man u make this look ez!😔

@troymcnair4546 Жыл бұрын

This nigga right here is the shitttssss.mind y'all he do some while recording the shirts with one hand.damn I been watching him high by accident and I been stuck every since.hats off to you sprayway homie.real talk he a real one.havent missed a video.💯🌹💪👍🔥💙☝️🖐️💰💵

@southernracing2468 Жыл бұрын

Happy late bday!

@Spennyman10 Жыл бұрын

Your work speaks for itself. Fantastic repair!! I remember the original video.

@SprayWayCustoms Жыл бұрын

Thanks for tuning back in 🤝

@martinalbert5653 10 ай бұрын

People are saying the foam collects water and would rot the car out. What do you think?

@winstonoatsvall8360 9 ай бұрын

@@martinalbert5653 I looked up the foam that he used and kit is waterproof and also repels water. So whoever told you that, do not know what they are talking about.

@martinalbert5653 9 ай бұрын

I pub some foam in a bucket of water. The foam just floated did not seem to take on water. I did not cut it to check if that would make a difference. It may?@@winstonoatsvall8360

@Auriam Ай бұрын

Thank you so much for sharing your skills and tricks of the trade with us instead of hiding it so no one else can do it! I needed to use some of these techniques to get my old van patched up for inspection so I could use it to move apartments.

@SprayWayCustoms Ай бұрын

My pleasure!. Thanks

@filmart430 Жыл бұрын

Some of us don’t have the experience to weld in a replacement panel. You showed some steps to follow with great results. This video is definitely being added to my saved DIY projects.

@SprayWayCustoms Жыл бұрын

Glad it helped. Thanks for watching and saving the vid

@precisioncueservice6355 Жыл бұрын

Thanks once again for your detailed procedures with no steps left out, and for being specific about your materials, tools and techniques. After watching so many of your vids, I've been able to overcome my fear of fiberglass;)

@SprayWayCustoms Жыл бұрын

Great…thanks for the continued support

@mq1714 Жыл бұрын

This repair job is 100% legit, in my eyes. I wouldn’t hesitate to bring my car to you for rust repair. Fantastic job! Keep it up, for realz

@SprayWayCustoms Жыл бұрын

Thanks 🙏🏾

@noelwallace5257 Жыл бұрын

Whaaat?

@deanosaur808 6 ай бұрын

Would you like the underside of your car repaired like this too? 😱 Live dangerously.. on the highway to hell 🤘🤘🤣

@merkov8715 6 ай бұрын

Just the video I needed. I got a CRV Gen 1 and this model is notorious for having rusted roofs. Thank you.

@KA-qw5cv Жыл бұрын

There is something satisfying about watching you succeed when some folks said you would fail. I am very glad you succeeded! This repair method is an option for the DIY-ers, as you said. Nice work!

@SprayWayCustoms 11 ай бұрын

Thank you so much!

@Goodoletom916 Жыл бұрын

Some people can’t step out of the mold of how everyone does it, I love doing things differently and getting great results, you da man, happy birthday, great video

@SprayWayCustoms Жыл бұрын

So true! Thank you

@lovetolearn5253 Жыл бұрын

I think alot of the doubt the so called professionals (some could of been) had is because they never tried anything like that before. I'm not a professional but I've seen a few people use a similar method just without the foam and it worked fine. It looks amazing and well done on that top. I was more worried about the top because you made it look to easy. I really thought there was alot more to it. I don't know your past painting and fab training but I thought you said you basically learned on your own by trial and error. If thats true thats even more incredible.

@SprayWayCustoms Жыл бұрын

Thanks for the support

@wmajaji Жыл бұрын

They are too bookish. Its not always the answer

@deanosaur808 6 ай бұрын

The main issue is that the car is now structurally compromised 😉 It's like using cardboard to hide a hole in the floor 😱

@Damacho-iu2tr 4 ай бұрын

@@deanosaur808 What are you talking about, cars now a day are made of foam and plastic. Not worth a penny.....!

@khh1725 Жыл бұрын

I watched that video 3 years ago and I never doubted it. Now we see that it worked. Sprayway does it again!!!!

@SprayWayCustoms Жыл бұрын

Thanks for tuning back in 🤝

@jdownie1926 Жыл бұрын

You are in my opinion the best instructor on KZfaq PERIOD! I've learned 90% of what I know from watching your videos keep them coming brother!

@SprayWayCustoms Жыл бұрын

Wow, thanks!

@quitmanwhitsey6320 Жыл бұрын

Man Spray Away from what I've been watching and learned over the years I think you do excellent work especially for the condition of some of the stuff you school us on. I've watched several of your fiberglass builds and all of them are awesome. Heck if I still had the ability to do it I would in a heart beat. However thanks again for another hit. That's why it's not good to down it until you try it.

@SprayWayCustoms Жыл бұрын

Right on…appreciate you

@daniellemclendon1898 Жыл бұрын

You are the professional ! great way of showing your haters and motivators in a humble way your work speaks for itself. I am so glad your channel is geared for the d.i.y. you go step by step and give us the materials and tools list. Thank you!! i am working on gbody door panels and speaker pods in fiberglass now.

@SprayWayCustoms Жыл бұрын

Thanks Danielle, I wish you nothing but the best on your project

@Patrickhp206 Жыл бұрын

That's why your work is highly respected, not bragging about the work, but making believers out of what they see with there own eyes. 💯

@SprayWayCustoms Жыл бұрын

Thanks for that

@KOSerg-vo2qb Жыл бұрын

Thanks I've in the rust belt and always wanted to learn to repair rust holes and give an older car new life you're the man !

@SprayWayCustoms Жыл бұрын

Glad to help

@rilloroc Жыл бұрын

Your DIY is better than a lot of professional stuff. I'd spend my money with you easily

@SprayWayCustoms Жыл бұрын

Much appreciated

@noelwallace5257 Жыл бұрын

Wow! If you came to work in my bodyshop and pulled of them stunts, you’d be down the road faster than could spit your own name….wtf🤦‍♂️

@mmc5095 Жыл бұрын

You do a great work and give us diy'ers some hope. The owner of this car has taking great pride in keeping it looking great.

@SprayWayCustoms Жыл бұрын

Yes he did. Thank you

@elizabethflores3448 Жыл бұрын

Your video gave me confidence that I can absolutely do what I need to to my 92' dodge truck, myself. Other videos had more words and made less sense. Yours is 100% more helpful. Thank you so much. Other comments are right, the 'pros' are just mad cause you helped someone save hundred or thousands of dollars that they would have pocketed.

@SprayWayCustoms Жыл бұрын

Glad I could help. Thanks a lot

@damiansailas6296 2 ай бұрын

I love what you do for the Diy of us who follow with no teacher. In my opinion it's waterproof now

@SprayWayCustoms Ай бұрын

Thanks

@G_Body_Queen Жыл бұрын

Still looks amazing after 4 years 🔥🔥🔥

@SprayWayCustoms Жыл бұрын

Thanks for the compliment

@paultrimble9390 Жыл бұрын

Yes sir he did great job. I've seen good money to get rust on next year, rust bubbles.

@TheBeerBox80 Жыл бұрын

Killer work. You can't even tell that it was repaired. I am not surprised that it held up as well as it did.

@SprayWayCustoms Жыл бұрын

Appreciate you

@TheDarkArtist66 Жыл бұрын

Feels good proving the haters wrong huh. Love it bro. I did that same thing on the quarter panel of a minivan for a cab company years ago. It still looked great when they retired that van. Good job my man

@SprayWayCustoms Жыл бұрын

Right on

@dr2man Жыл бұрын

I'm one of those DIY guys who enjoy all your videos, I appreciate seeing those sometimes unconventional tricks of the trade you show and explain. I started doing bodywork on my own vehicles by just doing it, lots of failures but many more successes as I learned from those mistakes. Thanks again for the videos.

@SprayWayCustoms Жыл бұрын

Cool, thanks Ronald

@bigsquatchsasfoot1964 Жыл бұрын

Perfect job I’d say and for the money you put into it it’s perfect , there’s always other ways to do stuff but there’s nothing wrong With this repair at all …also for all the people who questioned it proofs in the pudding still looks like the day he done it 👌 happy birthday brother hope you have a wonderful day 🎂 🍻👍

@SprayWayCustoms Жыл бұрын

Thanks man..I appreciate the compliment

@customchristopherlewisbuil8690 Жыл бұрын

White vinegar works absolutely awesome for stopping the rest I said I'm doing a 1988 SS build and I've just been using white vinegar and it seems to work absolutely perfect for budget

@SprayWayCustoms Жыл бұрын

I agree…thank you

@Homersimpson1991 2 ай бұрын

I got a 72 c10 and a 1980 el Camino that has some rust. I have put a lot of work into and spent some money on different sand paper and tools because seems like every video I watch has a different technique or tool I need and over complicate it starts to overwhelm me. Finally found a channel that reassures me that I can do the job. Thank you.

@SprayWayCustoms 2 ай бұрын

Thanks for watching and the support

@vincentfarrara9434 5 ай бұрын

I have a 72 Lincoln Continental and it has the old vinyl top and this is exactly what I'm thinking about doing appreciate that bro it'll be my first time doing a fiberglass patch

@AxelfoleyTheGreat Жыл бұрын

This guy is good at what he does.

@SprayWayCustoms Жыл бұрын

Much appreciated

@AxelfoleyTheGreat Жыл бұрын

@@SprayWayCustoms I don't even have a project car but I like to see people work on them and I been watching your videos for a while now and you are certified legit at what you do. Keep up the good work.

@willietucker7139 Жыл бұрын

I questioned that repair myself bro...on the account of what I was taught about galvanic corrosion. Gotta tilt my hat to you though...YOU DA MANN!!!

@SprayWayCustoms Жыл бұрын

Thanks Willie

@BUZZKILLII1 Жыл бұрын

Just want to say thank you. My self and a friend are going to start a youtube channel to show that old guys that want to learn can. You didn't have ass anything you did. You get what you put in. Thank you for the video and the follow up. Haters love to get out front but they always finish last. Again thank you. And Happy BIrthday !

@SprayWayCustoms Жыл бұрын

Thanks a lot for the support

@Aidenbrown2005 Жыл бұрын

People don’t understand but fiberglass and the stuffing stuff behind it has been around a while and it works diy is always the way to go if your Abel I’m 16 and not once have I took a car to a shop great work man

@SprayWayCustoms Жыл бұрын

Much appreciated

@ordellfanroy9517 19 күн бұрын

Them diy skills are the truth 🫡

@SprayWayCustoms 12 күн бұрын

Thanks 🙏🏾

@raycox2298 11 ай бұрын

Hands down best car custom painter body work. Custom pods. I watch all videos. Inspired me to do my own. Because the steps you show from start to finish. I would love to get my 83 olds delta 88 done with your magical hands.

@SprayWayCustoms 11 ай бұрын

That is awesome!

@kevinm9838 3 ай бұрын

You did a $500 repair on a 3-4 thousand dollar car and 4-5 grand paint job...it's all relative. Your care and attention to the repair was great, all things considered! I am fan.

@SprayWayCustoms 3 ай бұрын

Right on. Thanks

@anthony-ju6qo 11 ай бұрын

Looking for someone real to learn how to do this. Could not believe the before and after video on that car. It came out better than new! You are beyond talented in auto body and as a teacher. Thank you for all you do. Subscribed 👍!

@SprayWayCustoms 11 ай бұрын

Glad you liked it!

@lydiaajohnson Жыл бұрын

It’s a beautiful job. I’m about to fiberglass my own car. I do it on boats. Fiberglass and metal bond well with the right epoxy. I figure the truly impressive part is the finishing work. You actually made the car better than the factory did. I couldn’t believe what you had to fix.

@SprayWayCustoms Жыл бұрын

Thanks Lydia

@grandcreator11 Жыл бұрын

I like how humble u stayed about it and while showing off the repaired work

@SprayWayCustoms Жыл бұрын

Thanks for tuning in

@LittleRedsGarage Жыл бұрын

My old neighbor fixed the roof on his 66f100 with foil tape and bondo and tractor paint. It lasted 5 winters and always sat outside before it even bubbled or cracked was very surprised!

@SprayWayCustoms Жыл бұрын

Thanks for the story 🤝

@mattcasoni Жыл бұрын

I would have cut that and welded in new pieces BUT dangit I won’t anymore. If I watched the original video I would have thought it’s a terrible idea… it’s not and I’m wrong. This is actually a great idea. No it’s not a factory restoration but who does those anyway? This is just awesome. Thank you for showing this and teaching a valuable idea. I just can’t believe how good this looks but there it is 4 years later spotless. Awesome

@SprayWayCustoms Жыл бұрын

Thanks Matt

@elelegidoriginal Жыл бұрын

I have almost exactly the same rust damage on my Nissan's roof and I thought, "I should be able to repair it with fiberglass" and, having seen this, I now know it's possible. Thanks for posting

@SprayWayCustoms Жыл бұрын

Right on! Thanks

@thegentlemanhooligan1932 10 ай бұрын

I just want to say thank you not only was this tutorial easy to understand but that amount of money your saving people on top.

@SprayWayCustoms 10 ай бұрын

Glad it helped

@kt6332 4 ай бұрын

Thank you. I just bought an old van and this is how I plan to repair the body work!

@SprayWayCustoms 4 ай бұрын

Best of luck!

@lawncuttingplusdelta Жыл бұрын

Brother I always look forward to your vids !!! …,I just got the notification …. Anyone who sees this and loves classic cars and learning to do paint n body …. This is one of a few real good teachers

@SprayWayCustoms Жыл бұрын

Thanks for all the support

@freshbutplain1144 Жыл бұрын

This man is the king of accomplishing his work in excellence.

@SprayWayCustoms Жыл бұрын

Thanks man

@XqeDiosxqe Жыл бұрын

It's so relaxing to see the old 😊 Paint fade away as you lay down the primer.😊

@SprayWayCustoms Жыл бұрын

It really is!

@larryjohnson3033 Жыл бұрын

OG Sprayway I'm sure I'm speaking for alot of folks when I say thank you my man, you definitely have taught me to keep alot of money in my pocket 💯

@SprayWayCustoms Жыл бұрын

Thanks Larry 🤝

@cwill2129 Жыл бұрын

Blessings brotha you just inspired me and everyone who does body work just know that you're a blessing to you fans really appreciate you! keep bringing that pressure .

@SprayWayCustoms Жыл бұрын

Thanks for all the support 🤝

@kenhoffmaster2424 Жыл бұрын

Great job, I enjoy watching and learning. I always have believed that no matter how much you have done something you can always learn something. These videos prove that. Thanks and God bless.

@SprayWayCustoms Жыл бұрын

Great point! Thanks Ken

@shanecoleman4128 Жыл бұрын

I appreciate seeing a way to do something less expensive and it looks good brother!!

@SprayWayCustoms Жыл бұрын

Right on

@jimmiecalvert3572 Жыл бұрын

That’s impressive I think the first time I ever seen some one use spray from and fiberglass on a Rust hole was sprayway custom I remember making a comment I would rather cut it out and weld it but you have an inner and outer panel there and you can’t get to the backside of the Weld to clean it up never doubt spray way and happy birthday man 🎉

@SprayWayCustoms Жыл бұрын

Thanks Jimmie

@bertalert341 Жыл бұрын

Retired bodyman here. I worked mostly in collision repair but my early years was in rust repair. One year I bought a caviler which was solid but it was covered in rust blisters, hundreds of them. I bought it from a farmer. He had a major stone road that he drove everyday. The stones peppered this car with blisters. The front hood and roof covered from cars driving in front of him. The sides covered from stones flying up. I did as you did in removing what I could with grinder and rust wire wheel. Every panel was covered in these quarter sized rust blisters. After cleaning as much as possible. I neutralized by using vinegar also. I then used just fiberglass resin as the barrier and finished with skim coat of bondo to level. That car lasted till finally the motor gave out, but those rust blisters never came back. The outside body was great. To be honest. I was amazed how well the resin locked on and sealed the areas after it was cleaned and neutralized properly. You do great work my friend.

@SprayWayCustoms Жыл бұрын

Thanks a lot. I appreciate you sharing your story with me 🤝

@edwinmachuca145 Жыл бұрын

Bro i just watched the original video and like i said man much love and support keep doing what you do and may god continue to bless you ma g stay humble

@SprayWayCustoms Жыл бұрын

I appreciate that

@RickyPinkston 4 ай бұрын

Youngman you have skills what a job all your works fantastic if you have a son or nephew or neighbor hood kid you need to pass those skills on i know its hard work but its really gratifying belive me your s pro at what you do but your videos do show diy,ers it can be done to you have skills need to pass it on to our young ones GOD BLESS YOU AND YOUR FAMILY AND BUSINESS

@SprayWayCustoms 4 ай бұрын

Greatly appreciated

@shaquillemulligan2768 Жыл бұрын

Happy Birthday Big dawg can’t even tell nothing happen with the good work you did and it’s been that long car still look good to me 🔥🔥🔥

@SprayWayCustoms Жыл бұрын

Thanks Shaq

@paulnewman7568 Жыл бұрын

Beautiful work as always !! , I wish I would have seen that video last summer , I had to fill some rotten holes in my Elco roof , and I thought about spray foam because I had just done a woofer box in it and I had a little bit of foam left !! !! But didn't try it , it needs to be redone now already , I'm going to do it exactly the way you just showed me ,! Thanks man !

@SprayWayCustoms Жыл бұрын

No problem Paul

@tonyadams09 Жыл бұрын

I CAN REMEMBER SEEING THE VIDEO OF YOU TRANSFORMING THIS CAR. I WAS ALL A GREAT LEARNING EXPERIENCE. HAPPY BIRTHDAY BROTHER

@SprayWayCustoms Жыл бұрын

Thanks Tony

@justinshaw4896 5 ай бұрын

If there is more than one way to skin a cat was a person. Your videos have definitely helped and inspired me to try to do it myself. I watched the sunroof video about 50 times. People laughed and thought I was crazy but here we are. 1969 Buick Electra with a Mini Cooper Sunroof that looks 100% legit. It took some time for the body work I ain’t gonna lie. You made it look easy lol.

@MrHALFPITT Жыл бұрын

It's amazing people don't understand when God created a genius- It's only a few made ....& we're looking at one! For those in the comment section who feel violated and don't trust this man process just sit back & acknowledge what you can do by accomplishing your Goals...if you believe in your work ,it's as simple as that !!! Simplicity

@SprayWayCustoms Жыл бұрын

Thanks for the support

@jaronjackson5501 Жыл бұрын

They must don't know who unc sprayway is, they know now. Keep it up appreciate always droppin gems many blessings to you and yours SW💪🏾💯‼️

@SprayWayCustoms Жыл бұрын

Thanks nephew

@jaronjackson5501 Жыл бұрын

Your welcome unc 💪🏾💯‼️

@stevepope5484 Жыл бұрын

I like the way he talks/and makes good since.

@SprayWayCustoms Жыл бұрын

Thanks 👍🏾

@TavosMr Жыл бұрын

You did great job on that car, I watch all your videos because I do like how the cars look after you repair them. The negative comments you did get is from “professionals” afraid of you. Showing them, it can be done with out need of spending thousands of dollars on that kind of repair. 👍

@SprayWayCustoms Жыл бұрын

I agree, thank you

@Seabass-a Жыл бұрын

Thanks SWC. You helped me figure out exactly what I needed to do for all the rust eating through the roof of my 1986 Ford E150.

@SprayWayCustoms Жыл бұрын

Glad I could help

@dabonneville27 Жыл бұрын

I have been watching your videos for a while now and really appreciate your talent and your sharing of knowledge. Have a blessed and happy birthday!!!

@SprayWayCustoms Жыл бұрын

Thank you

@dabonneville27 Жыл бұрын

I really should support you a a lot more as much as I watch your videos and I apologize for that!

@Binlocloc Жыл бұрын

Happy Birthday to the Sata Jet King, Left hand, Right hand, that boi even nice with a rattle can, SprayWay!

@Binlocloc Жыл бұрын

Ps. Imma put ya back on! lol

@SprayWayCustoms Жыл бұрын

Lol…I be trying 😂😂

@datdudetheyhate4121 Жыл бұрын

Sprayway don’t play. U have helped start n fall in love with my hobby which is body work n paint thank u so much God bless stay up

@SprayWayCustoms Жыл бұрын

Thank you as well

@emmarichard1230 Жыл бұрын

Yes sir we all have to do things are self's or go broke letting outhers do it for us thanks for the update and box Chevy has a big smile got that m.c looking good buddy

@SprayWayCustoms Жыл бұрын

Thanks man

@dannygilbert9477 Жыл бұрын

Let me say one thing I have worked in high end shops don't let them fool you I love your work

@SprayWayCustoms Жыл бұрын

Thanks Danny

@joseluisruiz3789 Жыл бұрын

I respect your work so much, too many People like to talk their crap too much. What you did here was perfect. And as a DIYer my self that doesnt have alot of money to take my car to get body work of this type done by a shop, i appreciate the time you took to explain everything and show how its done. Thank you! 🙇‍♂️🙏

@SprayWayCustoms Жыл бұрын

Thanks man

@edmurray5763 Жыл бұрын

Awesome. I always welded panels in but that is totally neat and strong repair. I going to do that on my truck

@SprayWayCustoms Жыл бұрын

Right on

@geneva760 Жыл бұрын

I disagree with anyone claiming that it is a "...permanent''...', fix - BUT - it is a DAMN GOOD solution and cost effective. Yes - if it was a 'million $ car' - it would not be the proper solution, but for the type//condition//value of the vehicle, I think it is a 'smart solution' and will work well for the life of the vehicle and he did a reasonably good job at the prep work. CHEERS from AUSTRALIA.

@SprayWayCustoms Жыл бұрын

Thanks a lot

@projectmidnight74 Жыл бұрын

Love it bro. I am now taking on the task of rebuilding a 74 c10 with tons of rust. This gave me some ideas. Thanks.

@SprayWayCustoms Жыл бұрын

Great…thanks for watching

@jessegonzalez2295 5 ай бұрын

Damn bro you could have fooled me I’m like okay this guys a professional I appreciate you very much for this video DIY on point them other nerds doubting you clearly was hatin and they should you GOT DOWN 🔥🔥🔥

@intricate6927 Жыл бұрын

In Sprayway we trust!! Never a doubt!

@SprayWayCustoms Жыл бұрын

Thanks man

@jimcrackz 11 ай бұрын

Thanks so much. I need to work on my truck and this video helped so much.

@SprayWayCustoms 11 ай бұрын

Glad it helped

@johnnylane5844 Жыл бұрын

Happy birthday! Mine was December 7th. I appreciate all of the videos.

@SprayWayCustoms Жыл бұрын

Thanks Johnny. Happy late b-day to you

@zakmey6944 7 күн бұрын

Ouens met vrouens, each to their own, so long as you do it on your own time, most people goes to their pockets, don't hate the player hate the game cause he did it to the top baby! Evens when you weld rust comes back, im from KaapStaad in Suid Afrika, respect and salute Holla Holla dauwg

@creightongoodwin7535 Жыл бұрын

Man!!! This video is an extremely intelligent approach to DIY vehicle body work!!! I believe that the Most High God has endowed you with the knowledge to do this work, and I am amazed about the manner in which you repurposed the vinegar and the spray adhesive. I had intended to use liquid steel (no welder either) for my body repair projects, but it is far less cost efficient than your method. Keep in mind that the auto industry has manufactured cars (Corvettes, etc) that embody complete fiberglass bodies; Obviously, the players haters don't know this fact...

@SprayWayCustoms Жыл бұрын

I agree 100 percent

@lloydbaker6988 Жыл бұрын

THANKS Sprayway 👍

@SprayWayCustoms Жыл бұрын

Thanks for tuning in

@gavinoliver8074 Жыл бұрын

This is why I love KZfaq. You videos are much appreciated. Thanks for sharing your skills brother. Gavin 🇬🇧

@SprayWayCustoms Жыл бұрын

Thanks Gavin

@stingrayvasquez9503 Жыл бұрын

Happy Birthday! Your videos help a lot of people like DIY’ers and people on a budget. I been watching your yt a long time. Redoing my dash right now (83 square body) Thank you for all your content

@SprayWayCustoms Жыл бұрын

Thank you…glad to have you on the team 🤝

@sn95roots21 Жыл бұрын

Happy Birthday man! We appreciate all the knowledge! Hope you had a great one with good food while enjoying yourself!

@SprayWayCustoms Жыл бұрын

I appreciate it! I enjoyed myself

@elcowarren Жыл бұрын

SHEEESH!!!!! Man please keep blessing us with all this game fam!!!! As stated.. the vids are for us dyi guys that may not have the skill set to weld or wanna cash out to have one do it. More than one way to skin a cat.. dope DOPE work!!! 🫡🫡🫡 🗣 MUCH APPRECIATED ‼️‼️‼️

@SprayWayCustoms Жыл бұрын

Much appreciated fam

@wallydabear512 Жыл бұрын

Great job. Body shops are super expensive and with older cars it definitely pays to do it yourself

@SprayWayCustoms Жыл бұрын

Yes it does 👌

@PHARRAWAY Жыл бұрын

very nice work Sprayway

@SprayWayCustoms Жыл бұрын

Thank you brother

@kevinmontoya7318 Жыл бұрын

Wow, I doubted you at first, but once it was all said and done it turned out great Respect

@SprayWayCustoms Жыл бұрын

I appreciate that!

@lpgibbo7463 Жыл бұрын

Done pretty much the same on 6 to 10 feet gouges & holes in Heavy Goods trailers inside & out. Constant repeat repair jobs in an HGV bodyshop in the UK cos the delivery drivers were always catching top corners of their wagons on the way out of bays etc & pallets being constantly rammed & scraped down the inside of the trailers too. Good job 😊

@SprayWayCustoms Жыл бұрын

Thank you