Sprinter Van Floor Installation in the Moto Van Build

Sprinter Van Floor Installation in the Moto Van Build | Part 2

Рет қаралды 47,058

Күн бұрын

The Sprinter Van Floor is DONE! In this video, I take the floor templates I created from the part one video and glue on the pvc flooring, install the L-Track and add some trim.
🥋👕 Seat Time Shirts 👕🥋
bit.ly/SeatTimeShop
Part One Video: • Sprinter Van Floor Ins...
The grey small coin pvc flooring you see in this video is from Garage Flooring LLC. I purchased the felt backed type for better adhesion. You can get the non-felt backed flooring, but they recommend using their adhesive if you do that. I used their adhesive and got the felt back flooring, double duty!
Garage Flooring LLC: www.garageflooringllc.com/tra...
Amazon Link:
Installing the L-Track (Logistic Track) was the part of this that was the most interesting. If you haven't crawled around on the ground underneath your van yet, get ready, you will. Luckily L-Track is easy to find and many companies make accessories for it.
L-Track: amzn.to/3aYQWEl
L-Track Mounting Hardware: amzn.to/2CsCWVi
L-Track Accessories: amzn.to/2Sfy0Iy
Strut Channel: amzn.to/2xpe6VZ
The trim I used at the end of the video is from Home Depot. It's 1/20" aluminum l-bracket. It's sold in 8' sections if I remember correctly. I didn't recess the heads, I liked the idea of the black on the bare aluminum finish.
If you have questions or comments, leave them below and I'll answer the best I can. Thanks for watching.
Moto Van Conversion Playlist: seattime.co/motovan
#MotoVan #VanBuild #VanLife
------
Follow Seat Time
Facebook: / seattime
Twitter: / seattime_co
Instagram: / seattime

Пікірлер: 30

@fryncyaryorvjink2140 Жыл бұрын

Finally, a video that shows L track installation. I was worried I'd have to get under the van. Honda Odyssey, I doubt there's much room down there

@nicholasuselmann2469 Жыл бұрын

"redneck engineering" is also my favorite phrase. good video man!

@SeatTimeClips Жыл бұрын

Haha, thanks!!!

@raleighparr3908 4 жыл бұрын

Best LT tutorial for conversion nerds!

@SeatTimeClips 4 жыл бұрын

👊🏻 Thanks!

@DirtyRiceOffroadCrew 5 жыл бұрын

Coming along nicely man.

@TheVicFlo 5 жыл бұрын

Thanks for posting this I want to add some l tracks to my passenger van and this definitely gave some real insight

@SeatTimeClips 5 жыл бұрын

Right on, glad it helped. Let me know how your project turns out!

@richardcomer6725 3 жыл бұрын

Good and helpful video.. thanks! Braaap!

@SeatTimeClips 3 жыл бұрын

Right on, glad it helped!

@jonathan.laporte3119 4 жыл бұрын

Just a question, why not frame the floor and insulate in between before plywood? To gain head room? By compressing the insulation that much wouldn’t you reduce how effective it is?

@keemikedaniels4531 3 жыл бұрын

Do you have any pics of the dirt bike loaded using the tracks you installed,? mountain bike loaded also would be great. Having a hard time picturing how it would work. Other then that it was a very helpful video.

@SeatTimeClips 3 жыл бұрын

I post a lot of pics to Instagram, and this one was awhile ago. Full transparency as well, after I got done doing the floor I got a message from the guys at Boltiton. They wanted me to try their rack in the van and I haven't given it back. It's been a great addition and I wish I had just bought it originally and not gone through the head ache I did go through drilling and prepping the floors. Here's the video made when we installed it: kzfaq.info/get/bejne/ft-eia1139nJaH0.html

@DmitriyAdv 11 ай бұрын

I know this is an old video, but I'm curious why you didn't just get L-track that's flat on the bottom and attach it on top of the floor (all the way through into/through the bottom if needed) instead of having to precisely measure three channels between the pieces of wood.

@SeatTimeClips 11 ай бұрын

Good question! When attaching l-track, or any mounting hardware to the flow, it needs to be securely fitted. If you just use self-drilling screws into the floor sheet metal, that's only as strong as the connection point can be. When I learned that, I decided I wanted a cleaner, more flush look, which the Flanged L-Track provided. If I just screwed the square version on top of the floor, it would then be a bigger bump to always try not to trip on. Hopefully that made sense.

@DmitriyAdv 11 ай бұрын

@@SeatTimeClips yep, makes sense! I'd go all the way through the floor with a bolt + big washer minimum of course. Was just curious if there was a reason you use that aside from the bigger "bump" as you mentioned. Thanks for the reply!

@joelohman92 4 жыл бұрын

Where did you get that supporting metal you used to distribute the weight underneath the van?

@SeatTimeClips 4 жыл бұрын

Home Depot, it's called Strut Channel, but if you're an Amazon shopper, it's on there too. amzn.to/2xpe6VZ

@bl0rq 5 жыл бұрын

I love thinsulate, but it's not the right material for underfloor.

@SeatTimeClips 5 жыл бұрын

Do tell more. I'd like those that find this in the future to have as much information on materials to choose as possible.

@piccolo6214 4 жыл бұрын

Currently building a van as well. LOVE Thinsulate but would have to agree that it's not the most effective insulation for floors because as it compresses it looses it's insulating qualities. You'll retain some but not as much as if the insulation were allowed to fully expand. A good alternative would be some sort of foam such as XPS foam board.

@ianf8005 4 жыл бұрын

@@piccolo6214 Yes I agree, thinsulate only works to its potential when it's not compressed and is able expand to its full 1.5" thickness. The best material I believe is the high density closed cell foam (similar to those thin camping foam rolls). You can get 3/8" thickness to cut thin to put between the floor corrugations, then once level to the top of the corrugations, a full layer of 1/4" thickness. Thinsulate is perfect for the walls and ceiling.

@CruJones568 5 жыл бұрын

How much of the coin floor did you buy? Thanks

@SeatTimeClips 5 жыл бұрын

I bought the 95 Mil Felt Back Small Coin Gray 8ft. On their site the smallest I found was a 20ft roll. I emailed and asked if they had any take off they would sell in a smaller roll. They did and I purchased 15ft.

@HoffartChiro 2 жыл бұрын

Question: you refer to the backing plates as conduit. I am searching for that product but don’t have a proper keyword to find it. What’s it name in the trades so I can find it? Thanks for the video as it gives a method.

@HoffartChiro 2 жыл бұрын

Answer found: steel unistrut channel.

@SeatTimeClips 2 жыл бұрын

NICE. Good job on the googling. Now that I have the Boltiton Rack, I really don't need that support, but here we are. I had a plan, executed it, but then a new plan presented it self.