SRAM / Sachs installing and adjusting cable in shifter chlikbox

Рет қаралды 202,804

Күн бұрын

You can support me
www.buymeacoffee.com/yatand
/ andriyya
Thanks!
Now there is a war going on in my motherland. The war has changed all our peaceful lives. Ukraine is fighting russian fascists who are killing children and destroying peaceful cities. The fate of the free world is decided on my homeland.I hope we stay alive. I wish everyone never to see what we see now.

Пікірлер: 47

@andriyyatsenko5201 2 жыл бұрын

Now there is a war going on in my motherland. The war has changed all our peaceful lives. Ukraine is fighting russian fascists who are killing children and destroying peaceful cities. The fate of the free world is decided on my homeland.I hope we stay alive. I wish everyone never to see what we see now.

@whssy 3 ай бұрын

Thanks for this video. I used it to repair one of the two bikes I am renovating for the Ukrainian mum and daughter we housed last year here in Denmark. Slava.

@TheSkjoldborg 4 жыл бұрын

Exactly what I was looking for. I had no idea how to change cable in the lockbox. This is the most non-obvious design. I didn't even know if it was possible. Thank you for the help!

@dirkhoflich4451 4 жыл бұрын

Thanks for helping me out! No music, no words - let pictures talk!

@McLIMENI 4 жыл бұрын

This is GREAT video! When the hand shifter is in 1st gear, the length of the cable, measured from the end of the cable coat to the beginning of the black ring when the cable is pulled and clamped in a metal hexagon and fitted in a red socket, is between 9.5 and 10.5 mm. Then fine tuning can be done as needed, when everything is assembled as on this video. DO NOT overtite cable in metal hex. , it will cut cable! Велики поздрав за аутора!

@Ahornblatt2000 4 жыл бұрын

You meant 9,5-10,5 cm and not mm, right? Or wrong?

@rafalux5358 6 жыл бұрын

Danke! Habe gleiche Schaltung und heute hatte ich Probleme mit der Montage. Super!

@haesge61 5 жыл бұрын

Great video. Just what i was looking for! Thanks

@47f0 5 жыл бұрын

Excellent video. Thanks much. BTW, never, ever, ever remove the gear indicator cover. Only evil can come from that, and it won't help.

@AttilaKutrucz Жыл бұрын

😁😁

@alenkraljic 6 жыл бұрын

Great channel!

@oledebess 5 жыл бұрын

Excellent video, just saved me 40 Euro, thanks

@lonnijeboer6224 Жыл бұрын

I really hope you read this because I want to thank you so much how this should be done!! Above all I hope the russian facists will be forced to stop the war and peace will seattle back again. But still thank you Andriy for posting your video without which I would never have repaired my wife's bike!!!!

@gerdseidel9556 4 жыл бұрын

Super Video, hat mir sehr geholfen ein großes Dankeschön !

@anders9968 4 жыл бұрын

Thank you!

@asd1286 4 жыл бұрын

it help me. Thanks for video!!!

@user-lw3db6pb8d 4 жыл бұрын

спасибо помог,а то чуть голову не сломал лайкос от души

@SMN_TV 6 жыл бұрын

looks good job. like to see more...

@blessedbythebest8658 6 жыл бұрын

You have fast hands. Subscribed.

@musiccontent4561 6 жыл бұрын

без слов но всё очень понятно.

@adrianv.hellbruck8067 4 жыл бұрын

A few explaining words here and there would really help and turn a good into a great video!

@TheAnnieDeppeChannel 6 жыл бұрын

Great channel! I am now a subscriber! Cheers!

@crumdub12 5 жыл бұрын

Excellent Video

@cristisonntag8763 2 жыл бұрын

thank youuuuu

@WANGBUDISS 6 жыл бұрын

great

@vasylvasyl423 4 жыл бұрын

It is the best video! Cool.

@jaikigupta4715 4 жыл бұрын

Nice video 👨

@AldoDiMarco 6 жыл бұрын

Good work

@andriyyatsenko5201 6 жыл бұрын

thanks for subscribing.

@t-a-t3610 Жыл бұрын

Best instruction.

@RbP9 6 жыл бұрын

very useful :) 76

@advanhal6329 2 жыл бұрын

Cable must not be set by trial and error. You will easy cut if too much. There are fixed cable settings published by SRAM or otherwise use their specific tool.

@whssy 3 ай бұрын

This method works as well as the tool if you watch it carefully. He shows you (at 3.13) where to place the hex retainer bolt. The way he shows you means you cut it just a bit too long and can fine tune afterwards. Sure - the cute elephant tool (one of my favourite tools in the world - I even have it on my tool board at work - I'm a bike mechanic) eases the process. But this method is fine - especially considering SRAM no longer make the tool or even decent quality click boxes any more.

@Heiko_Cochius 4 жыл бұрын

Best thing: WWI screw driver at 4:09

@testusgiper 2 жыл бұрын

Тепер і в мене усе працює.

@kenlor71 3 жыл бұрын

There must be a precise measurement between the nut and the adjusting barrel. The SRAM tech sheets say 8cm from the nut to the barrel adjuster for the P5. It's probably the same for theP7.

@paullarrabee7358 3 жыл бұрын

9 cm for the P7

@unos10 2 жыл бұрын

I was thinking the same, would be awesome to have the numbers