It's a Regal Raptor. They sell to multiple dealers across the world under different names. AJS, Johnny Pag, Junak, Hunter, the list goes on. Most engines are based on the CMX250 (More modern ones changed to EFI and/or water-cooled, the older model engines they used in their line up were literally copies of the CA125 and CMX250, with the exception of the 300cc and 350cc models) I literally have 3 bikes in my garage right now, a Honda Rebel CMX250, an AJS DD250E, and a Jinlun JL125-13. Guess what? They're all the same bike with all the same parts :P There's more Honda Rebel copies out there than actual Honda Rebels. Benelli Patagonian Eagle, Keeway Patagonian Eagle, Sinnis Cruisestar, Jinlun JL13, AJS Regal Raptor DD. It's insane. Check out the different brands for the same bike here: www.regal-raptor.com/en/map.asp

End of day, it's a motorcycle .... motorcycles are cool !!

Cool looking small bike. Everyone has to start somewhere. This looks like a good bike to do it on...💯

It is a good looking bike. I'll give it that. Fuel injection, dual front disc, rear disc, inverted forks...it ticks a lot of boxes and on a budget. If one isn't hung up on country of origin, it would make a good first beater bike or commuter bike that you wouldn't need to worry about getting dinged up. Zip~

Hey there! Never expected this bike on your channel, but happy to see that. I own same bike. Bought it new for USD 3450 back in 2014 and have done more than 54 000 miles on it since then. Bought it for the looks, but never regretted that purchase =) I will add some minor details: it is indeed liquid cooled, not oil cooled this one is newer model with EFI and balance shaft - older ones had carbs engine basically is honda rebel with liquid cooled cylinders bike is made in China and sold around the world under different brands as Regal Raptor, Leonart, Junak, Jawa, Geon, Dadyw, Hunter - all local dealers - hence strange name

That bike has so many names. In Nepal, Taiwan and Australia it was launched with a name Hunter Daytona. However in India it was called Regal Daytona

I like it...and you dont need 1500 cc motor...I have ridden close to 200,000 miles in the past 12 years, own a couple of 250cc bikes and they go anywhere my bigger bikes can go...

Did anyone else almost die when he fell?? That was great.

I got one here in Australia known as a Hunter Daytona. As a first bike it’s been awesome. Learning heaps, working on it heaps and no issues mechanically. And everything about it is simple. I got 14” apes from a Harley to fit, hid the wiring, changed all the lights to LED. It’s been nothing but a pleasure to ride and work on.

The bike is obviously an entry level, budget, beginner bike. The fact is, some people want to ride around town, dont care about displacement, want good good fuel economy, and like the cruiser look . It looks better than the little Honda's. Perfect little urban cruiser. Im gonna check, but I'd wager these sell well overseas and south of the border. I'd imagine a poor guy would love this and customize it. Its fun watching what people fo with small motorbikes , worldwide.

Just bought the Johnny pag 300cc thank you guys so much stay safe out there should be here in a few days lucky number 3

Johnny Pag... AKA: 约翰尼·帕格

I remember hearing about them following the Kikker Hard Knock. I still have my Hard Knock and considered a Pag or a Cleveland Cycle Works, but decided against them. Kikker Hard Knocks are just a great fun riding bike.

For the price you could get a lightly used Honda VTX 1300

I can't believe you edited the trip WHY we all trip and we all laugh (with no injury) its one of the funniest parts of the human condition.

Exactly the same motorcycle is sold in Australia as a ‘Hunter’ (an Australian company that claims they designed it 🤣) Check that motor more closely. You’ll find it’s water cooled.

Why oh why are there sooooooooo many garbage motorcycles on the market?! This bike looks like something Harbor Freight would sell. In a box.

I like the choppers he made they were beautiful! That is a good looking and riding bike! Thanks for sharing!

Thanks Harrison... on 12/23/19 I watched this and that was just the verse I needed today!

The main thing I like about power is being able to get yourself out of sticky dangerous situations.

Love y'all keep on keeping on!!!

I....I'm going to keep my VMAX.

So Johnny Pag is basically California's answer to Cleveland CycleWerks?

It might not be fast but i'll bet it has better overall range than 90% of the stuff we see with 3.x gallon tanks and 1xxx CC engines. I'd hope anyway.

I would buy one in a heartbeat except for one HUGE problem. Where the heck do you get parts for it?? Looks like no dealer anywhere near.....well, anywhere!

I loved the fall over backwards

I had one of those, 2008. But it is a ton of problems like the chain is too long, it bangs and needs to be adjusted constantly. The breaks lock up and makes the bike to fishtail to the side. And I changed out all the part and installed Honda in there. This being said, it was a fun bike and great for traveling around the country.

My favorite thing and one of the reasons I subscribe to your channel is the scriptures and the Lord. I will proudly support a business who doesn't shy away from having that as part of their channel. Thank you and I like this bike, seems like really cool entry level bike.

I giggled when you said I assume I'm going the speed limit 🤣 that's me

Live the scripture you guys put in every video that’s just awesome! God bless and thanks for the review, I’m looking at buying a Johnny Pag bike this weekend.

Johnny Pag started off with his 49 cc mini chopper. It sold for like $1600 and was popular around 2004. Shortly after that all these other cheap lower quality mopeds came out for about $300 to $600 bucks and made them really tough to sell after that.

It's water cooled, it exists also under Hunter Motorcycles Indonesia as the Diablo but with a 400cc 6 speeds gearbox and fuel Injection for 2021 😀

I own a 2016 Pagsta Cruisa (that's the model name). It's a 320 cc engine and runs very well and very comfortable.Great looking bike. It was my first bike but I use my 2018 390 duke now.

I wanna see that bike climbing the Rocky mountain roads. Great video

Does it matter what you ride? Not really. Does it matter if you are having fun? Definitely.

That is a water cooled engine. I have the same 350cc engine in my Regal Raptor. It is a clone of a Honda Rebel BTW. There are three variations of that bike- Cruiser, Spyder and Daytona. That one is the Spyder.

Dude, this is your best video ever!

This bike was my first bike, I do really had awesome experiences with it, I used to live in Argentina, and I bought it used from my best friend, today I am missing it (In Argentina they are manufactured by Jawa-RVM), and I am looking a way to have it again (not exactly the one that was mine) but now I am living in Colombia, South America (if you have any info on how to have it imported, I am glad to hear about). Mechanically speaking, this bike has no problem, you can make it sound louder, "twearking" the mufflers, and boy It roars like an angry 1200 cc, I had it with carburator, not fuel injection systems. the only thing that "let's say" I felt of a real bad quality are the "metal" parts, the brake, the gear, the footpegs, they are of some kind of alloy of a poor quality and tends to break easily, but that's a thing you can purchase and change, cheap or even improve. As i said before, if someone knows how to have this bike imported to Colombia, I do really apreciate, I wish to have it again, my precious white horse.

I love in the UK and have this exact bike with a 125cc engine, it's called an "AJS Daytona" it's a brilliant bike although abit under powered being a 125cc

In Argentina their name is Jawa / RVM Daytona, and in Spain are Leonart.

This bike is so cool it reminds me of My first bike it was a 350 Honda I wish I never sold it it was so much fun getting around town I went out everyday on it I went to the night clubs on the weekend on it I miss my 350 Honda....

Be nice to find one w a blown engine and throw a bigger one in. There appears to be room for a 650 or 750 at lesst.

I have an 06 spyder 250. It's a fun little bike and rides nice for it's geometry

Johnny Pag? That has to be one of the worst brand names ever.

I like it, how much does it weigh? I'm still lovin my FZ-07 I got from you 💙!

Never heard of them very nice tho!!!!Indiana love and blessings as always!!!!

I was still laughing my ass off at his wipeout over the front wheel...even at the point that he started his test ride LOLLOL

It's 3X Faster than your average Moped. Sean is probably one of the most humble men doing MC Blogs on KZfaq. Most guys would not dare do a blog on the Pagsta!!!

Sean that a nice looking bike and the performance impressed.

“Back person” is Sean speak for passenger? Just busting chops guys. Thanks for the review

I have one of these in Australia called a 2014 Laro Prostreet and it’s a 350cc efi version. I actually love riding it and it is deadset the most comfortable and nimble cruiser I’ve riden… I have hollowed the cats on it and hollowed out the mufflers so straight piped it and it sounds really good. It gets a lot of complements and thumbs up etc etc no it’s not a Harley but it’s a great beginner / intermediate bike to get into cruising and modifying until you upgrade into a nice Harley which is the plan. I wouldn’t mind modifying this bike to run a Harley Evo or another V twin which is what lead me to this post in the first time.

Those bikes are made in China by LiFan and sold around the world with different names such as AOS, Regal Raptor, Pagsta and Hunter. The 250 is 234, the 300 is 265 and the 350 is 320. They are water cooled though. Not very reliable and bits tend to break and fall off. Parts are impossible to get in the USA as Johnny Pag went bust with those bikes and started again with another Chinese company making different bikes. I had the Australian Hunter version and sold it after two years of fixing it up every weekend. Save your money and buy a Honda.

50 years later my back and neck stopped hurting....But I still have that Jonny Peg!

What is the Honda CB 1300 r ? Be nice to see one.

Would be a cool second bike for back and forth to work or just knocking around on. Looks pretty decent for the price.

I like the paint ... 300cc insurance.. swap in an S&S and a baker 6spd...lol

That's dedication y'all the man's riding in 40° weather keep up the great work y'all and I didnt even mention the horrible pa roads lol

That same $2000 something will buy a used Sportster or used American made Honda VTX

These guys go by the name Hunter in Australia, the same Johnny Pag parts but under a different brand, kinda think like Chervy and Holden, but bought a second hand bike for $2500, fixed it up for about 600 and it only has 9000km on the clock. Entry level chopper for chopper fans like myself.

I had a 220 avenger when i lived in the Philippines. Its a good bike for bigger guys in a country where 90s 110s, 125s, and 150s are the norm. Lol the honda xrm125 screamed and cried everytime i sat on it. And i got that 220 up to 125kph once on a straight away.

J.r is my friend since 1996, great family

It's like a Rebel that grew up a bit, but isn't quite full grown.

Plot twist: its actually made by HD.

I had a 50cc pagsta chopper that i put a 50 cc semi auto baja dirt bike motor on. I rode it forever and when it broke i of course neglected it for years and eventually sold it to the scrapyard.. Well long story short i saw it a couple months back so i stopped and the guy said he was fixing it for his son! I was just happy it was running again and in rehab. I told him it would do burnouts and wheelies! 😄

I heard somewhere that they have hyosung engine.

How can I get ahold of one I saw this video. An I new this was the bike I wanted.

i have a 2003 50cc pagsta that i got for $600. its impossible to find parts for it but its lasted and its been fun

I paid only slightly more than that for my 2010 yamaha raider

It's just a "Get Around". Something to commute back and forth to work! What do you think about the Kawasaki Vulcan Voyager 1700 ABS? I never seen you ride one.

I have a 2009 Johnny page street bike I'm looking for the control panel for the right hand side

Haha, I don’t think it’s a selling point saying in has more power than a lawn mower! It really is a nice looking bike, but I’m keeping my Harley heritage for now.

They had chopper versions as well that were very cool

Hey can anyone help? We bought one a while back and it wasn't until we got it home that we found out it needs some repairs. We havent found any shop that is willing to repair it because they say " its not a popular brand so we dont know if we'll find parts for it". Living in miami, does anyone have any recommendations?

8:04 that was a lot of noise and not a lot of go lol

I was pretty impressed with the forward controls, wheel design, oil cooler and fuel injection for the price. Did you figure out what Pagsta is?

Cleveland Cyclewerks is pretty cool aswell

Bought a spider 2010 drove it for less than a year it broke down several times , can't find anyone to fix it can't find parts will never take it back to wild side choppers in Toronto ont had warranty issues never returned my calls , almost killed me buy not tightening my front brake bolts its been sitting here for 12 years can't get ahold of Johnny pag I'm pissed any help out there I really loved the bike?

Pagsta is alright enjoying ur work,bikers rule all.

I don`t know about the 300, but here in Spain they are 350`s, and my previous bike was a Kawa Vulcan 750, and I swear, my Leonart Daytona 350, at least with the straight pipes and chipped ECU can go 0 - 60 just as fast as the Kawa, and it has no problem doing a 100mph on the highway here in Spain. I ride with my MC here in Spain and it has no problem keeping up with them going on Harley`s. In fact effectswise, the Harley is a chromed out tractor.

Bwahahaha.... That took me a sec. I was honestly was trying to place Mordor on the map!

Thank You.... for Not knocking the little bike. I respect that from you. A fun little bike I think ...for the $$$.

what shop could i take this to if i needed repairs and maintenance ?

Just give this thing away to someone, don’t torture your customers.

Hi. i have the same bike with an 125cc motor! good 1st bike for me!! it calls "Leonart Daytona 125" ate Portugal! BTW love the channel! Thanks

I like it. I would give it a try.

Today Sean sounds like a pure salesman. Which he is pretty good at.

I had a 2008 red with silver ghost flames spider for around two years I sold it for exactly what I paid for it ..! ( I talked to Johnny Pag himself...! ) , “Not his son who took the company over eventually “ , but to Johnny himself, Out In California “ about a problem I had after I had purchased my spider.....! When I purchased the bike , after a few days of riding it had a problem with the right bank fouling plugs ..!!!It was not a carburetor problem...! Johnny was very nice to me on the phone he said go to the dealership tomorrow morning and drop your motorcycle off after they open I told him I would..... The dealership called me the day after that and said my motorcycle was ready to pick up that I needed to bring a pick up truck....? Johnny had overnighted me a complete ( brand new motor ) and had the dealership install the new motor as opposed to trying to fix the Problem with the Other one ....! Johnny also ordered the dealership to give me the old motor for extra parts...!!! I got more compliments and questions about my spider then I did my Harley people wanting to know what it was it was a very smooth running little motorcycle but the top in was around 42 miles an hour....! It was great to take to bike shows and rallies but you could not get it up on the highway unfortunately..... Prof Jeff Johnny and his son your last name is actually ( Paganini ) i’m not sure of the spelling but I think this is correct...!

My question how cheap can you get the fuel injection system and can it be converted to put on Japanese motorcycles like a Suzuki dr650 on a Kawasaki or even Yamaha XT

He could've made it A LOT cheaper if he didn't start a business in CA, but you've gotta give it to Johnny he made it happen!

Had this Harley pass me going home from work. Looked pretty good but sounded like a moped. It was one of these.

I picked one of these, after seeing one local for not too much, and looking at KZfaqs of swaps to slightly larger motors. Like into the 700cc range. But all the vids are so old, I can't get a response from most of the builders to get some details. I did get an answer from someone who put a Harley 883 in, but with so much frame altering it really wasn't the same frame any more. For now I have a chain drive 750 shadow motor I got cheap ( not running, but so I can eyeball things) because I once found someone who wrote he had put one in, but I can't find him again. And also have seen a few xs650 motors that I know should fit, but again, the posts on them are old and the posters don't respond. Also saw one with a 650 Savage motor, but I want just a little more, plus more than a single cylinder. So it's been more like a full size model car that I play with the style of (made a sissy bar, working on a king/queen seat, etc) until I can work out the motor idea.

I'm intrigued 🤔

Sean's official title at SRK Cycles is kickstand quality control tester.

If someone gave me that I wouldn’t say no, and I’d be proud of it. If it was getting me from A to B as stated looking cool. What’s not to like???

Here in Chile that motorcycle is called Regal Raptor Spider

Minute 8:33. If u were going to build a motorcycle as cheap as u can, it won’t look like this, and if it does, it will cost u 20k. That is exactly why I bought mine 1,6k and customized it. in Spain it is called Leonart !

It's name is Daytona in Turkey. The brand is Regal Raptor. The spyder is the same tho.

Cut out the fall??? C'mon. When I saw you were ok, I had a great belly laugh..I always tell my guys, if I fall, please get it on cam, so I can post it.

I just seen one in FB marketplace for 2 grand I’m in the process of getting my motorcycle licence and am considering it. Even just to rip around

Could you swap a different engine in this chassis? Any suggestions ideas?