Stage 1 - How to debaffle a Vulcan 900 Classic pipes

Рет қаралды 88,357

4 жыл бұрын

Welcome to my channel. This is my very first KZfaq post on how to debaffle your pipes - Stage 1. Loud pipes saves lives.
This video will show you step by step on how to debaffle your Vulcan 900 Classic pipes. Note* Do at your own risk.
Good luck and enjoy.

Пікірлер: 62

@heybruh3274 3 жыл бұрын

I just did this right before putting on my new Viking bags. Took about an hour from start to finish. I was wishing I had a Dremel with a circular cutting blade because I think this could be done in about 30 minutes. Anyways, a big difference in the exhaust!! Sounds even better "live". Not sure I will go to "Stage 2" because of the neighbors but I will take this new found happiness one day at a time. Thank you for posting. Reference: 2017 Vulcan 900 Classic.

@matthewivy6857 2 жыл бұрын

Dude this is the exact same bike I have in this exactly the video I needed to see thank you

@elijahkane69 13 күн бұрын

Oohrah brother. Thanks for video. I ahave 2019 Vulcan 900 classic Lt. Be safe

@tanveerzaidi4380 3 жыл бұрын

Thanks for uploading the video, i referred it when I debaffled my VN900C... thanks again !

@Lee-70ish 3 жыл бұрын

I did stage one then tapped the holes that lets me insert Allen bolts to return it back to normal, as here in the UK they wont pass the noise levels for the annual safety/emission checks that all vehicles over 3 years old must pass

@benbendingrodriguez5572 3 жыл бұрын

@@Lee-70ish Thought your government only allowed scooters🤣

@thomasgosling9888 3 жыл бұрын

Nice bike sounds amazing for a 900

@aymantahiri3619 3 жыл бұрын

Thanks for the video! Nice music by the way.

@payasitocincelito6004 Жыл бұрын

Nice I love it how sounds 👍👍👍👍

@187fluffy187 4 жыл бұрын

I have a 08 classic and the previous owner started the process of drilling off the rivet/studd heads. While i was riding one of the black caps blew off so now i have one pipe with the cap and the other without (it looks awful) . So im thinking about doing the stage one so they are the same.

@robertward3635 2 жыл бұрын

SEMPER FI BRO. & THANKS !!!

@Chris-kr6ho Жыл бұрын

What's up brother, lama brother here showing support and taking notes as im getting ready to do stage 1 on my vulcan

@centralvalleyvulcan6555 2 жыл бұрын

Nice skeleton in the background, Classic!

@mml1224 3 жыл бұрын

grat vid lama.!...so what u clean your wheels/spokes with and white walls man?

@0Rthx 3 жыл бұрын

thats how i wanted to start by debaffle, but thought all that drilling is kinda experimental so i just replaced stock with cobra pipes and intake with pcv and it runs like a new bike or i should say like a different bike, and offcourse louder pipes save lives :D

@prepertruckin8525 Жыл бұрын

⭕️semper fi brother devil dog sounds awesome

@vikingpsych 4 жыл бұрын

Trouble hearing a couple of times. Can you post bit sizes for both drilling parts and blade size for easy list?

@jackmartin3575 2 жыл бұрын

I just got a 2016 Vulcan...I think this may have already been done to it...it's pretty loud!

@dean3434 2 жыл бұрын

Yes indeed, something every adolescent should do with his or her new bike... Dean

@evil_musclemuscled3814 3 жыл бұрын

Was this bike out before the polaris scout

@jonhuber5719 2 жыл бұрын

After your stage 2 did you experience a power loss?

@Farmerboy5 3 жыл бұрын

What you do is get something black to screw down on the flat part in the exhaust

@zerokiryu2380 3 жыл бұрын

I don't understand negative comments here, like why did you watch the video if you had nothing good to say? Thank you for the vid, hard to find stuff for the vulcan, or maybe it's just on the mobile version that it's hard. Did you have to make any adjustments after this stage or stage 2?

@jernbek1 2 жыл бұрын

I have been told that the full stage 2 baffle removal will cause the engine to run leaner but is this the case for just the stage 1?

@blackbird69xxx 2 жыл бұрын

Just get the procom fuel injexctor box and turn up the juice £94 in the Uk

@peteenns5861 2 ай бұрын

From what I've been reading online from a Vulcan forum, if you only do the stage 1 or 2 debaffle and don't touch the air intake, the bike will be okay. Same if you only do intake and not pipes. When you do both the bike will run very lean, and you need to get your ECM flashed for the new setup. There's someone everyone refers to as Ivan who does ECM reflashes for these bikes and has a very good reputation.

@gizmotony1234 2 жыл бұрын

WOW that is an Awesome way to destroy your exhaust , Good Job ,Bro

@dylantherrien1053 Жыл бұрын

Id call it more of a modification then destroying, Thats the entire reason people are watching this video because they want their bike to be louder without having to buy new pipes, i say to each their own

@truthfilterforyoutube8218 3 жыл бұрын

Need to open those up to at least 1/2 inch holes. Gets rid of the " Hiss" sound

@johnnymartinez733 Жыл бұрын

Why didn't you just pull the baffles out? Instead of drilling more holes into them? Just curious fam and btw great looking bike 🔥🤘🏼

@mikkelsimonsen5923 9 ай бұрын

Pulling the baffles out is stage 2, and the bike gets extremely loud compared to this stage 1 "mod" :)

@talentseekrs 8 сағат бұрын

What.is.stage.2.?

@farooqkhan3729 Жыл бұрын

I feel this isn't really "debaffling", because the baffles are still in there; they were not crushed or extracted. You just put holes on the back plates to make it louder. Real debaffling (where you crush or remove the baffles all-together from the pipe) give a deeper rumble.

@majestictwelve3709 3 жыл бұрын

Won't the inside of the pipe turn black anyway?

@lamabiker179 3 жыл бұрын

Put 12K miles and never turned black

@TheWolverine34 4 жыл бұрын

Did you notice any improvement or decline in performance? I just picked up a Vulcan 900.

@lamabiker179 4 жыл бұрын

After riding 200 miles this weekend, I haven't notice any difference on improvement or decline in performance. Quite honestly, I debaffle my pipes to be heard when approaching texting drivers. But wait, I actually finished stage 2 and will be posing a video about it tonight. Stage 2 - There is no turning back, and I am loving it.

@TheWolverine34 4 жыл бұрын

@@lamabiker179 I look forward to the video!

@0Rthx 3 жыл бұрын

just go stage 1 with full exaust intake and fuel module and ull fall in love again lol

@mml1224 3 жыл бұрын

@@0Rthx you have links on the products please V six?

@VeritasEtAequitas 2 жыл бұрын

@@lamabiker179 Drivers can't hear you until they're right up on you, especially going opposite directions

@carlossantillan4647 8 ай бұрын

WTF, is with the loud music and caput camera angle?

@notoriouscowboy9773 2 жыл бұрын

cutting the pipes with that saw ...12 hours later

@juans3728 9 ай бұрын

Why did you drill out the baffle completely it would have given a better sound. There wasn't anything wrong with what you did but the baffle is still inside the pipes. Peace.

@theone2be33 3 жыл бұрын

Thats not debaffled. Thats drilling holes. Debaffling is taking the whole insides completely out

@lamabiker179 3 жыл бұрын

What you are speaking of is Stage 2, which I speak of on my channel.

@6eJIa6pyc 3 жыл бұрын

if you haven't thrown out these oval parts and you have an ebay account, sell them to me

@mickanslow9882 2 жыл бұрын

Laughed out loud when you were showing us the 1/4" drill bit to cut the 8 holes - maybe you should try a metal cutting bit instead of a brad point wood drilling bit - also, get a better set of bits - nothing wrong with Ryobi - just not the $1.99 set for working on butter.

@craigroberts6439 3 жыл бұрын

Nice video…next time back off on the music level….distracting trying to listen to you.

@ronsmith4325 Жыл бұрын

Naw man... just buy some pipes. This doesn't sound right at all. I hear air whooshing through those little holes you drilled more than the rumble of the bike, and that's just at idle.

@kovi36 Жыл бұрын

You ruined a good exhaust! Sounds a lot worse than before! You should have bought a cobra or v&h and kept the original untouched!

@unsafe_at_any_speed Жыл бұрын

I totally agree. I just bought a 900 Vulcan. It took me a long time to find one that was unmolested. It's unreal what some people do to their bikes because they think it's cool. Irreversible damage to very expensive parts.