We just did it in our small church and let me tell you everybody loved it. Thanks for share the design God bless

Thanks... Will be trying it soon and will revert. Stay blessed

Thanks so much! We love to share what we are working on and see what others are doing as well.

So i finally completed my coroplast woven wall. I wanted to share a few tips of things that i encountered while putting it together. 1. When stapling my coroplast i probably should have aligned the coroplast along the edge of the wood and then stapled. This will allow the seams of the coroplast to fall right between the center of the seams where the frames meet. 2. If you want to make sure that all of your panels bow out at equal distance, then keep all panels bowed out as you are stapling them. Align the current panel with the precious panels. 3. If you have to put legs on your frames, then i recommend making your legs in the shape of an upside down U shape. Use screws to attach the legs. 4. I used 3.5" Screws, bolts and washers to join my frames to one another. This makes for easy dissemble. 5. When selecting wood for this project, PLEASE make sure your 2x4 wood is as straight as possible. If not, your top or bottom base will not align properly and will be hard to tightly screw together. 6. It took me a while to figure out why Brandon screwed his top 2x4 in vertically, unlike his bottom 2x4. The bottom 2x4 is screwed in flat or horizontal because it sits on the floor. The top of the frame is afixed vertically or the 4" part facing you. The logic is: if you are hanging the frame from the top, you have more depth to place your Eye-hooks; also the frame is stronger when the screws are aligned vertically as oppose to horizontally. I hope this makes sense to you. 8. Lastly, we used 3" trim strips to cover our staples. It gave the wall a cleaner look, plus if you ever decide to disassemble your wall and reassemble you can use the same coroplast strips. Dont worry about all the holes from the stapler. Just cover the holes with your trim. I used my nail gun to attach trim because the holes were virtually invisible. Hope this helps someone. I spent about $600

Thank you for this awesome idea. Using it at our youth event, right now! Thank you!

This will absolutely work with up lighting. We didn't up light in our application for 2 reasons. 1) Our ceiling is white and we would have a tone of shadows to deal with. 2) The service that we use these elements in has a 10 minute flip from a more traditional service. It is just easier for us to attach everything we can to a truss that is flown overhead, then drop it in for the service. If you are not having to flip a stage and the shadows are not a bother for you, up lighting is a great solution. Thanks for your question. Keep up the good work!

Nice job with this Brandon. Love these videos, keep 'em coming.

Brandon...awesome video and design. I noticed that you were stapling your coroplast stripes onto your frame while it was flat on the floor. How did you connect all of your frames together? Did you just bolt them together for easy dissemble? Secondly, after you stapled all of your coroplast strips to the frame did you just have a group of people help you to lift it all at the same time to a standing position? I wanted to make sure I do not break anything when I lift it. Thanks for all the videos you post. You are a God-sent!

Love it man! Please keep posting

your work is just awesome!!!

Great and helpful videos!! I wish you would have posted the building process also.

Thank you!

blessed on Mr Brandon cook appreciate hopefully when I done with is I will send you the picture of it from the church. thanks agen

God bless you!

smart

impressed !

That is a cool looking backdrop and seemingly simple to put together. Could you please elaborate more on the kind of lighting you used, how many lights, are they centrally controlled or singularly controlled. I would like to use the same concept for designing our church's backdrop. Thanks.

Bring back the traditional church with normal lights.

Hi Brandon. I was wondering if I make this design as a stand alone piece will 7ft wide x 10 ft tall work. We would like to have multiple sizes set around the stage. is there a limit to the height? Thank you

will this work if we dont have tryst to hold the lights but if we place them on the floor

Hi Brandon This is wonderful !! Thanks for sharing . We are planning to do this stage design in our new church venue. Can we also buy the stage truss , led lights from Ali Express? If so , which stores can you recommend ? Thanks

Thanks for sharing your information with us. I'm real interested and need your help

I love this design! I was just wondering could it be used on a smaller scale?

its a very nice idea. i wanna try this in my church. can you help me understand how is that blue light & green light placed please ??

Where did you buy your coroplast sheets?

Hi!! What is the measure of the thickness of the coroplast you used?

You have not indicated the thickness of the coroplast. The cutter will cut 4-6 mm. What do you recommend?

Hello Mr Brandon cook 1st I would like to thank what you show me today and I have a question that can helps me to do this in our church one thing I don't anderstand is where exactly I should put the light to get that kind of light hopefully I heard that from you soon may God bless you.

Great work....please how much does it cost?

I cant get the size in amazon can you please tall me how to order it from Amazon thanks and waiting

How does this affect the acoustics of the room? Or is stage noise no problem cause of in ears and di?

What is the thickness of coroplast?

Please I need help in designing my church stage can I get a contact for more ideas and help,

May i please know the tiknes of the coroplast? thanks

I want to be a set designer and I need to know how to go about it. thanks

i want to decorate a stage for technical fest in my college whose theme is mirage,,,plzz help

What colour coroplast did you use?

as I can do this figure and what material?

What kind of lights did you use

Can we find someone we can pay to design and fix everything for us?

Can you share with us the exact DESIGN / pattern?

can I nail the coroplast

En español Esque no le entiendo algien me ayuda

Cameras too close

Hindi please please

Thank so much for this! This seems pretty simple. I'm going to try this at my church. I've sent you a message on Facebook. Can you pls check it out? Thanks!