I just add 8112s w/SPC UCAs, couldn't find 8100s in stock anywhere for the rears so I went with 5160s as a place holder! Fuel Rebel 20x9x1 +1 w/General Grabber ATX 285/60/20. Your vids helped me make my decision. Your content is the only available, along with 2 (now 3 w/mine) threads in the forums, for the 8112s for the F150. Felt like I was taking a little bit of a leap over something like an ICON/King/Fox where there's tons of content/reviews available. I am so glad I did! I had kings on my tacoma in the past, and while I know that platform is totally different, these 8112s are IMO even more balanced w/better on road feel, and even the 5160s in the rear until I can get ahold of 8112s, have made my ride so stable, very low body roll, no more nose dive, and the combination these first few days over these rough ice and snow laden NE roads, has blown me away. Any one seeing these and wondering if you should make the jump instead of one of the other higher end 2.5 brands, don't even sweat it, you will thank y our self for trying something different! And for the age old question, with them adjusted to 2.5 and 1.5in block in the rear, I have no rub at full lock in either direction. Didn't touch front crash bar and I am sitting with .75" rake. SPCs made alignment a breeze.

The 17's are just the right size for any tire smaller than 35'' imo.

Another quality video by Noah! Interested to see how this one turns out as you've basically outlined all my exact wants and needs for my 2020 3.5 EB. Haven't seen that set of bilsteins yet, they look sweet. Great build so far looking forward to next video.

You’re awesome because you take your time to explain everything thanks buddy

After seeing this video I talked myself into buying the Bilstein 8112 / 8100 for my 2015 F150 Fx4 Platinum Screw . I’m very impressed with the set up . Had the front set at 1.5 inch and ended up with a 1.75 rake … ride is incredible

Looks nice. Are you going to do a performance review of those shocks? I’m interested in how they compare to fox and falcon.

I'm having a hard time finding these 8112 bilstein coilovers for my 2020 f150 lariat? Why is this ?

Nice start to the build! Any rubbing with the 285 75r17?

That’s one hell of a hunting truck

You gotta drive it for us folks out here. Sitting in the shop . 😂. C’mon man.

Rough country needs to take notes! I did the vertex coilovers and matching rears, the instructions were pretty bad. I also had to wind off all the preload to get 2.5inch lift, was the 3inch lift kit. When installing it was near sitting at 4inches. I did a add a leaf too in the rear, all said and done in happy with the product.

how you guys install kits without removing the cv axle nut to give more play is beyond me. I had a hell of a time even with the extra flex

Thanks Noah. Love all the tips on the little things.

Those bilstein actually look really nice.

I don’t set the 8112 for the f150 on your site. Only for Toyota

What wheel and tire set up is on the red f150 at minute 18:14?

Love what you did to the truck, but why not replace the UCA's too? Wouldn't want the OEM's to fail 20-40K miles from now.

The amount of surface rust on only a 2020 f 150 is disappointing :(

Please add wheel well liners its looks so naked in iconic silver . I know you sell them wink wink

Any reason you didn’t just go ahead and replace the upper control arms?

How often do those bilstein shocks have to be rebuilt?

super clean shop dudes! jelly

my '15 ram doesn't even have close to that much rust...and that's a brand new ford....crazy.

What happen to these bilsteins?

Nice! Liking the 👀 look. 👍🏼

No Bilstein UCAs?🤔

How do these handle washboard roads? Better then the Fox 2.5 w/dsc adjusters?

Currently unavailable?? Redesign?? Any updates??

What color is the truck

Great video.! What UCA’s do you recommend for this set up on a 2016 Screw Fx4?

Where are y’all located see surface dust already forming on a 2020 oof

Would you recommend those tires for a Raptor?

Are you guys going to start carrying those Bilstiens?

Leihtner design bed rack!

Do 8112 need to be rebuilt regularly?

Ford did an alignment after fox 2.5 inch, made it worse and handles scary. Any recommendations? I would not do an alignment, just adjust the toe in maybe.

I thought it was the Carolina squat?

Does the instruction includes torque specs? If not where do i get this from? Thanks

I see you cut the crash bars…. 🧐

Excellent 👍🏻

If the goal is to use the truck off-road sometimes, why settle for the “bead look?” … How dependable will airing down be without actual bead locks?

Just found your channel! Do you know if this will work on the 14th gen trucks?

Whats size are the tires and is it on a 2" level kit???

Put a 4x4 pop-up camper on the back and stay out there longer

Hey! May I buy one of your pull off front bumpers from this or the red giveaway f150? Doing a facelift on my 17’. Thanks!

I thought Chevy was their show sponsor lmao

Ressi???????? Offroady????????