WOW! Nice video. You should sell these

Holy cow! I built my first ever staggered using this technique and they actually came out not bad! Thank you!!

Best technique I've seen for staggering works perfectly thanks for showing this trick just used it and worked perfectly and so much quicker

Oh my goodness, this is so simple and so very effective. I know pre-built coils and wire are pretty ubiquitous and cheap these days, but I'm still a fan of DIY for getting exactly what I want. Thanks for a great video.

The hair clip in the drill is brilliant. Awesome job. Glad I found your video.

both the bobby pin and the button are a cool trick, thanks for sharing!

Thank you SO MUCH for this it's going to save me time AND MONEY! The method I was taught was wrapping 2 strands of your outer wire then unwrapping 1 which is such a waste of wire I never played with fused claptons because of this. NOW, your method gets perfect spacing without burning through 6-7 feet of wire for no reason. If there was something better than a thumbs up I would give it 2 of those! I wish I found this sooner but I'll take it anyway! THANK YOU!!

simplicity an perfection coming together.. legend thank you!

Jesus! Fiddled so many times my spaced and this button trick is just amazing... thanks dude :-)

God blass you best trick for coils since ever.👏👏

This is the best method ever. Thanks!

Wow the easiest way I've seen so far great video thanks very much. 👍 👍 😊

Thanks for the trick because of that I managed to make a staggered Clapton coils, I started with 26 gauge wrapped with 32 gauge but when I perfected it I went for even finer gauge and then I managed to make a 28 gauge wrapped with a 38 gauge wire and it is fantastic trick it made it so easy, so thank you for that trick and I will be making my own staggered Clapton wires from now on

Thank you very much, made my first SFC using the double loop weighted method but this looks like it will work even better.

Great trick, especially for the newbie coil builder like me. Going to give this a go, thanks for sharing.

Excellent tip, thank you buddy for the easy way you offered 👍🏻👍🏻👍🏻

At last a perfect tutorial. Short and right on point. Very well done brother. you've earned my like and sub.Peace.

Good job. Fast and straight forward build tutorial with really good tips thx

That looks awesome, I'm going to have to try this soon!

YOU ARE A GOD AMONG MEN! Thank you for allowing me to do everything without buying anything!

Bud you're a DIY genius

Nice video. Great stuff. You make it so easy. Will have to try this.

Just found your Vid...Top Banana!!!!...You just enlightened me to the easy of decent coils.

Awesome technique!! Thanks for sharing

Brilliant video! Thank you for posting.

Old vid I know but awesome method and tutorial. Thanks a million.

I'd never thought of using a hair grip in the chick instead of playing the wire in with a bend, this is much easier and quicker, thanks!

This is exactly what i am looking for, ty bro!

Love the video and can't wait to try it. Currently using the weights connected to a wire loop method to keep the spaces. Look like this method keeps the spacing wire from bouncing around witch would make the process a lot more consistent! :)

Thanks for this video, good idea button technique!

Hey bud, Thanks for the tip. I look forward to any help I can get as I'm new to making my own claptons and such. Looking forward to more tips. Thanks bro

I'm new to building this looks like a easy way to learn better than some

Bobby pin trick was worth the price of admission alone👍🏻

Nice trick, currently practicing staggering for staple staggered fused will have to give this a shot thanks!

EXCELLENT video. A+++ great video

excellent idea man, good job and thanks ;)

some awsome little tips there, thanks for sharing will def try this!!

This vid and his (OPs) other one about SSFC should be in the "Builder's Hall Of Fame" ....great stuff. Cheers

This is crazy thanks for sharing 👍

sick lil trick when i build again im givin it a shot.

Good idea, well done! :)

yuppp lovin it bro..thanks

Great video that was amazing thank you

nice bro keep up the good work

sick !! very nice man

very nice! thanks for the tips!

Quality job! If you have the time fine. Some of the ready made wire and coils do me just fine

I liked the button trick, will try it soon....

awesome, just freakin awesome; i'd be a fool not to subscribe, no redundant chitter-chatter, no obnoxious music, just all business, *PLUS* I learned several nice bonus tricks! OP,thanks, man. will share to my social media accts.!.

Perfect technique..👌

Hlysht that was impressive dude thanks.

Nice. Good Idea

great video, thank you!!!!!!!

Damn, awesome! Make thing easier, thanks for sharing!

awesome 💪great Work ✌👌👌👍

Thanks a lot bro!

Itried this but used a spool tamer instead of a hair band. For the spaced clapton part, once it gets goung you dont even need to hold the outer wire's spool. It's amazing, it claptons on its own, all you do is work the drill, the rest takes care of itself and you can go really fast.

Amazing!

Excellent 👍👍👍👍

thanks for sharing👍

Great tip....thanks

brilliant

ok thanks for tha quick response brother

WOW so cool

Looks juicy

Epic! Consider it done.

That is awsome I have problems with my hands so this trick would be good for me

Nice! Subbed

You are a fucking innovator. God bless you.

I like it

nice

genius

the best

Awesome :)

Can't work out how it does it but it works.

Damn that is a flawless technique. Fuck doing em by hand.

THX für diesen Trick

excelent

wow that smart trick , can you make clapton trick ?

thankyou!

I'm trying this shit tomorrow morning. I make 2x29-38 then wrap with 40. Its a bitch n have to use a magnifying glasses head set but get so mad when I fuck up the spacing using a hanging weight. Thanks man,,I'm really surprised I haven't seen this vid before PEACE

Excelente Mod

Awesome! If you can do that with a button, what can you do with a zipper?

Wow!

It's amazing.. how can I get that ball bearing swivel with coastlock snap?

And the Grammy award goes to.....

I made the stupid mistake of not making sure the drill turned in the right way therefore the staggering kept overlapping. Make sure that the staggering wire wraps so that it goes forwards into the gaps between the clapton wire. Might be hard to understand but you will get it once you try making the wire

Wow. Beautiful build. I can build decent coils, but never been able to build these.. I've wasted hundreds of feet of wire trying.. man is love to finally try a set of these.. these are sexy man.. I'll let u sale and advertise your coils in my fb group I created and run if u wanna make me a few sets lol

Man I really need to figure out what to do with my swivle mount situation lol.got a small El cheapo clamp I use but it isn't ideal.

спасибо за видос

wow.

This video is the reason why I can do staples now. A buddy of mine was saying something about making some I said if you do use a button it makes it a lot easier to space he just looked at me and I showed him and I told him i got the idea from KZfaq thanks to this man for this video, it really does make it so much faster. I do have a question because I make aliens as well and it can be a pain in the ass but I have watched video's on here on how others do it. Everyone does there in the opposite direction of the way the Clapton but when I try that it messes up so i do it in the same direction as the Clapton and it turns out fine. Any tips?

Thanks for the tip! What size wires should I start with for core and Clapton wires? Just now starting....thanks!!

Man you rock!! Quick question any kind of shirt button will do? Appreciate this video man 👌

Fucking genious

крутой парень!)привет из России

I dont even know what I just watched and what this is used for and why it came on my recommendations.

Supanice!

Anyway to do this with a multi core by any chance? Or would button method work? Thanks

Fu*k, it is genius !