STAINED GLASS: 10 Soldering Secrets for Success

Рет қаралды 69,044

Күн бұрын

Our favorite soldering irons:
Check out this list Stained Glass Soldering Tools from artyrvglassstudio www.amazon.com/shop/artyrvgla...
Check out this page from artyrvglassstudio
www.amazon.com/shop/artyrvgla...
If you’ve watched our previous videos, you’ve learned to cut glass, grind, and copper foil your stained glass project. Now it’s time to solder. In this video, Ed will teach you how to prepare for soldering, from using the best flux to using the correct soldering iron. If you are ready to learn new techniques and make beautiful stained glass, this class is for you!
Join us every Monday at 7 PM EST for a Q&A, Glass Chat and Glass Demo.
To learn more about the artists, visit their website conwayglass.com
To learn more about the ArtyRV GLASS STUDIO, visit here: conwayglass.
Thanks for visiting our website and shopping in our Amazon Store. We sell products to help support the ArtyRV GLASS STUDIO. We look forward to bringing you fresh content every week!
Cheers!
Barb & Ed
We teach about stained glass, glass, and glass cutting and offer free stained glass tutorials on how to make stained glass. this channel to get access to perks:
/ @artyrv
We offer free online education about how to make stained glass. You'll learn at your own pace and improve your glass skills while elevating your knowledge of stained glass. ARTyRV videos help you acquire the tools and knowledge needed to improve your stained glass skills and grow your business. Glass Artists, Ed & Barb Streeter (The Streeters) are makers of exquisite hand-blown glass and hand-crafted stained glass windows. Together they have over 70 years of glass experience.
To send a message or to send a question for the Monday Q&A, visit conwayglass.com/artyrv
We invite you to watch, comment, and join our community of stained glass creators and makers. We have a fun, interactive Livestream on Mondays at 7pm featuring a stained glass Q&A, Ed’s Glass Chat, and a stained glass live demo. It's a fun interactive way to learn about how to make stained glass.
Our channel is all about sharing information and working together to improve your glass skills and learn at your own pace. The ARTYRV GLASS STUDIO is an RV outfitted with a stained glass studio and a portable video studio setup.
Disclosure: Some of our links are affiliate links. At zero cost to you, Conway Glass will earn an affiliate commission if you click through the link and finalize a purchase.
If you like what we're teaching, please let us know by subscribing and giving a thumbs up. Spread the word and tell your glass friends! We love hearing from you so please feel free to leave comments, suggestions, or questions in the comments.
The ArtyRV GLASS STUDIO is a virtual glass-making studio and an art project of Ed & Barb Streeter (The Streeters). Ed shares knowledge of over 40 years in the glass business. The GLASS STUDIO is a place to learn how to make stained glass windows, improve your glass skills and learn all about the glass-making studio. Beginner stained glass students can learn how to solder stained glass.
Need a stained glass tool list? Want to learn the best kind of stained glass studio setup or the best sort of stained glass tools for beginners? From beginner stained glass students to seasoned professionals, we invite you to watch, comment, and join our community of glassmakers. It's all about sharing information and working to improve your glass skills. The studio features glass blowing and how to make stained glass windows.
Who's Arty? ARTYRV GLASS STUDIO is a virtual glass-making studio. We have a portable stained glass studio setup, a Pop-Up Glass Gallery, and a portable photo/video/editing setup. Join us at the ARTyRV KZfaq Channel where we get inspired and produce videos fresh new videos each week. Happy Cutting!
On the ARTyRv Channel, we explore the many aspects of glass making including hot glass, warm glass, cold glass, glass blowing, glass painting, stained glass, blown glass, glass restoration, repairs, glass painting, and many more ways to improve your glass making skills.

Пікірлер: 200

@Artsrock36 2 ай бұрын

Thank you so much you explain better than anybody I’ve seen and I’ve watched more videos than I could count!! You’re my new go to guy!!!

@ARTyRV 2 ай бұрын

Thank you for the compliment and thanks for watching!

@KarenCrockenburg 9 күн бұрын

I soldered in my class today, and your explanation and techniques make so much more sense than how teacher did it. Thank you!

@ARTyRV 3 күн бұрын

Glad it helped!

@foxgloved1 4 ай бұрын

In my opinion you are a godsend to us stained glass beginners 😃

@ARTyRV 4 ай бұрын

Thank you for the kind words and thanks for watching!

@HostileButHonourable Ай бұрын

$95 for what you did is straight undercharging. Thats incredible value.

@tubes789 6 ай бұрын

All these tips got me so fluxing excited to whip out the ol' hobby box! 😂 22:44

@ARTyRV 6 ай бұрын

Great! That’s what we want. Thanks!

@foxgloved1 4 ай бұрын

Lol

@user-fn3lk8zu5e 4 ай бұрын

i would have saved myself so much frustration if i had only saw your videos first! its so good to know the mistakes i have been making have solutions!!! NOT GIVING UP! THANKS TO YOU

@ARTyRV 4 ай бұрын

Glad I could help!

@carlbrenninkmeijer8925 Жыл бұрын

Thank you!!! I am in Europe and it impressed my time and again. May the Germans have Angst, the British likes fun, etc. Americans like this video shows, share and encourage , many thanks !

@ARTyRV Жыл бұрын

Thanks for watching and the nice comment!

@fucktories Жыл бұрын

When passion for art meets experience, you get videos like this one! I made tremendous progress from day one simply by implementing your advice! thank you!!

@ARTyRV Жыл бұрын

Fantastic! Thanks for sharing!

@-ray-h Жыл бұрын

Lots of good information on the top ten tips on foiling, soldering, temperature and soldering basics, combined with a lot of great advice on stained glass procedures... Thanks a lot Barb & Ed for all you guys do...! 👍🏼👍🏼

@ARTyRV Жыл бұрын

Thanks Ray! We are trying to help. Thanks for all your help!

@hollyhawk8273 Жыл бұрын

I really enjoy watching your tips. I have done stained glass for years as a hobby, but I find I still learn something new everything. Thank you!

@ARTyRV Жыл бұрын

That’s what we like to hear! Thanks for watching.

@virginiabeall8338 Жыл бұрын

Thanks!

@ARTyRV Жыл бұрын

You bet!

@jeanburgin160 Жыл бұрын

This is great to learn your steps ... I've learned more than I know from 3.5 years of lessons in a stained glass studio. Many thanks. All the best.

@ARTyRV Жыл бұрын

Thank you Jean! That is exactly what we like to hear! Have a great week!

@PatWolf-mq4zs 2 ай бұрын

wow!!! Best Stainglass video I have ever seen! I have been doing Stangl for 20 years. This video has been extremely helpful and inspiring. So many videos are unclear… They don't show you exactly how to do a particular technique.… But you are an excellent teacher! Thank you so much. I've never subscribed to any KZfaq channel before except this one because I already know what I'm going to get. Thank you, thank you thank you! I hope I get to meet you one day!

@ARTyRV 2 ай бұрын

Wow, thanks!

@caroltillietmo6889 Жыл бұрын

That is such a cute kite, I am just getting back to stained glass after a 21 years, Thanks you for the tips. I enjoyed watching this.

@ARTyRV Жыл бұрын

You are so welcome!

@patriciahuyck8824 Жыл бұрын

Great video. Good tips. Just wish you would have showed how you rap the 20 gage wire around edge. Will tune in Q&A on Monday night. Thanks.

@ARTyRV Жыл бұрын

Hi Patricia! We show how to make the hook and wrap a suncatcher in this video. Hope this helps and thanks for watching!kzfaq.info/get/bejne/arCepa16t6namYU.html

@patriciahuyck8824 Жыл бұрын

@@ARTyRV thanks for sending me video. Might just have to make a leaf. Ed gives great information. I've watched other videos and they don't explain how as good as Ed does.

@ARTyRV Жыл бұрын

Thanks Patricia! The leaf video shows how to make a hook and wrap wire in detail. I think you’ll learn a lot. It’s also start to finish.

@jen1836 Ай бұрын

Re ventilation. I have an exhaust fan built into a box the height of the wall cavity that contains the window (don't know the technical words sorry), has a foam seal around the box, and it sits on the window sill. I work with epoxy and had noticed that while the room I work in is ventilated well, I could smell fumes at the other end of the house, even with closing the room door. Since putting the exhaust fan at one window it pulls the air from the room out that window, so airflow comes from inside the house to out that window. Clears the fumes from the room and prevents them entering the rest of the house.

@ARTyRV Ай бұрын

Yes fumes can travel. Glad you found a solution.

@angelapierred6461 Жыл бұрын

You are a great teacher! Thank you. I think I can finally solder. I was doing it completely wrong.

@ARTyRV Жыл бұрын

Glad I could help!

@4Brandy4 6 ай бұрын

This is a FANTASTIC video. Thank you very much for taking the time to share so much great knowledge. Your two methods of soldering will surely help me. Thanks again!

@ARTyRV 6 ай бұрын

Glad it was helpful!

@reynagamartinez7084 8 ай бұрын

thanks for sharing👍

@jarmstrong2843 2 ай бұрын

I had a stained glass business for nearly 45 years. Working with lead fumes all around me for such a long time began to take a toll on me. Now is suffer some neurological issues from the lead and my fine motor skills are gone in my left hand. Despite having good ventilation in my shop for all those years, one can not escape the negative impacts of the lead. Then there will be those to tout lead free solder. But, I found that stuff to be garbage and never used it when if first came out. Now, I am retired and watching your video rekindled the desire to start scoring glass again. However, I best leave things alone at this juncture of my life since I don't want to make things worse.

@ARTyRV 2 ай бұрын

So sorry to hear of your health issues. We definitely urge folks to have an annual blood test and to avoid toxic fumes. Daily exposure to these toxins is a real danger. Thank you for sharing your experience. Please stay in touch. We’ll be talking about this at the Monday night livestream.

@diyanindia1 Жыл бұрын

TOP video 👍👌! explaining in details and professionally the 2 techniques of soldering of stained glass, the foiling method, the electric soldering tool, the composition of the solder for copper foil, the flux... all with in addition sympathy and positivity.Thank you very much and good continuation 😍🥰❣

@ARTyRV Жыл бұрын

Thank you for watching and appreciating Top 10 Tips for Stained Glass Soldering! Ed enjoys teaching and it shows. We’re inspired by your post and glad you found us. Check out our livestream on Mondays at 7 pm and bring and questions. We answer stained glass questions live. Thanks again and stay awesome! 😎

@georgeokane6608 10 ай бұрын

perfect!

@ARTyRV 10 ай бұрын

Thank you for watching!

@toniwalrod6687 Ай бұрын

Youre a great teacher. Thank you

@ARTyRV Ай бұрын

You're very welcome!

@barbaraholland1816 4 ай бұрын

Very informative and easy to understand! Thanks!

@ARTyRV 4 ай бұрын

Glad it was helpful!

@juliegraves7064 Жыл бұрын

Bravo, Bravo!!! All kinds of great info!!! Thank you!!!

@ARTyRV Жыл бұрын

Thank you Julia! Lots of great info, right?

@ellenbryson9676 Жыл бұрын

Thanks Barb and Ed! I love the kite and great tips too!

@ARTyRV Жыл бұрын

Glad you enjoyed it. It has lots more than 10 tips, right? Thanks for watching and being a part of our glass community!

@jeanburgin160 Жыл бұрын

Great tutorial Ed. All the best!

@ARTyRV Жыл бұрын

Thank you! Good to hear from you!

@jodysauer9040 Жыл бұрын

Thank you, very helpful!❤

@ARTyRV Жыл бұрын

You're so welcome!

@laronda3195 Жыл бұрын

Thank you Barb and Ed! This is a very helpful video! The kite is really beautiful!

@ARTyRV Жыл бұрын

Thank you La Ronda!

@roselucht4583 Жыл бұрын

thank you this is very helpful!

@ARTyRV Жыл бұрын

Thanks for watching

@kats3781 Жыл бұрын

Thank you for such a nice detailed video.

@ARTyRV Жыл бұрын

You are very welcome!

@Gatsu796 Жыл бұрын

Great video very interesting, thank you for the tips much appreciated 😊

@ARTyRV Жыл бұрын

Thanks for watching!

@melissal7984 Жыл бұрын

Thank-you so much for this! I just subscribed to your channel! The tips that you are giving are so helpful!

@ARTyRV Жыл бұрын

Glad we can help, thanks for watching. See you Monday @7pm

@missmaine76 Жыл бұрын

I just started learning stained glass and your videos have helped me tremendously! Thank you!

@ARTyRV Жыл бұрын

Wonderful!

@themima5 Жыл бұрын

You’re amazing! Thank you

@ARTyRV Жыл бұрын

Thank you!

@ARTyRV Жыл бұрын

Thanks for watching

@Seratjati Жыл бұрын

Great tutorial sir, I am learning all from here, salut from Indonesia

@ARTyRV Жыл бұрын

Thanks for watching!

@SportWatchBands-qy5ee 7 ай бұрын

I love that you focus on made in America products! Thank you! #madeinUSA Great video!!

@ARTyRV 7 ай бұрын

Our pleasure!

@shaunbroschard4000 Жыл бұрын

Helpful as always..thank you. Good teaching skills

@ARTyRV Жыл бұрын

Thank you Shaun. Glad we could help. Thanks for watching

@danaridlon8670 Жыл бұрын

Thank you for all these tips, makes me want to practice till perfect thanks!

@ARTyRV Жыл бұрын

You're so welcome!

@Saartje05 Жыл бұрын

Love the video. I have problems soldering but now I see I'm doing it wrong. I'll try using your technique and I'm sure it will work.

@sallymccornack2800 Жыл бұрын

You are an amazing tutor. Thanks so much for this. I am just starting out and find your hints and tips so very useful ❤❤

@ARTyRV Жыл бұрын

Thank you, glad we can help.

@JoeyArispe Жыл бұрын

Thanks for sharing your tips and trick to get the solder to look good like that!!

@ARTyRV Жыл бұрын

Thanks Joey, we hope all is well.

@JoeyArispe Жыл бұрын

@@ARTyRV thank!! Starting a large stained glass job for my grandmother today. I'll have to send pictures when it's done! Stay safe you guys!!

@ARTyRV Жыл бұрын

Hi Joey! Yes please send them. Thanks!

@megiab Жыл бұрын

great tips. I'll be watching this again. I've been at this about 14 months, but have been cutting and foiling for the past couple months so just wanted to get back into solder mode. Didn't expect to learn so much new stuff! thank you!

@ARTyRV Жыл бұрын

Thank you, we’re happy to help.

@jennyhoman195 Жыл бұрын

Thank you so very much for this video. I’m a beginner and this is good info.

@ARTyRV Жыл бұрын

Glad it was helpful! Thanks for watching

@joanmaro3297 Жыл бұрын

Thanks again

@ARTyRV Жыл бұрын

Thank you too!

@julierickert2145 Жыл бұрын

I've worked in glass studios doing restoration leaded windows for 23 yrs, copper foil for repairs. Due to circumstances I no longer work with a studio. I've been watch your work along with other artists. As you have said there is always something to learn. I've set up a room in house to finish copper foiling. I'm not used to sitting doing glass work(frustrating) however I'll find the chair height.

@ARTyRV Жыл бұрын

Good to hear from you! We like to listen to our favorite videos while foiling! Please keep in touch and let us know how you’re doing in your new space. Good luck and Happy New Year!

@c0rnybread Жыл бұрын

Thank you for the video! Definitely learned a lot… and that I probably need to use a much higher temperature 😅 the explanations were very informative

@ARTyRV Жыл бұрын

Glad it was helpful!

@willamightknow7639 11 ай бұрын

New subscriber and new to stained glass as a hobby. Thanks for sharing beginner tips that are about safety, technique, and producing a great looking stained glass piece. I’m a visual learner so it helps to get the camera close to the action.

@ARTyRV 11 ай бұрын

Welcome aboard!

@madambutterfly5343 Жыл бұрын

Thank you 🙏🏻 your tips are more easier to understand than other stained glass artist on KZfaq. I appreciate the tap (touch and go) method instructions. I’ve struggled making a bead. This video also made me understand I’m soldering too hot. You’ve helped me tremendously with this video. Thank You

@ARTyRV Жыл бұрын

You are so welcome!

@cvsisthedevil1898 Жыл бұрын

Super helpful! Currently working on glass with many pieces and trying to figure out how to clean up solder lines so that the adhesive doesn't peel up. If you have a piece that you could do a demo on to clean up solder lines, I know I'd be so excited to see it given your wealth of knowledge on the matter. Thank you for this video!

@ARTyRV Жыл бұрын

Hi! If the adhesive is peeling up, your iron may be too hot. Thanks for watching.

@rcman124 Жыл бұрын

I want to make my own jump rings. I once watched a video that showed how to make several of them at once. Thank you

@ARTyRV Жыл бұрын

You are so welcome! Maybe this will help kzfaq.info/get/bejne/g9SmmrqQvLadhnk.html

@barbaracovey 3 ай бұрын

Lead solder is the best, however what is wrong with no lead solders? Thank#, great video.

@ARTyRV 3 ай бұрын

Nothing

@anitaelghandor7295 Жыл бұрын

Yes it helped me tremendously,the problem I have is attaching the jump rings,not sure why,can I make my own?

@ARTyRV Жыл бұрын

Yes, you can make your own jump rings. And get some needle nose pliers to help with the holding. Thanks for watching

@aleksandrasaneva4661 10 ай бұрын

Hi Ed, thanks for this very informative video! I'm a beginner and starting to learn my basics with your channel :) I have a question though: why did you do touch and go on one side and bead on the other? Was it just for demonstrating both techniques or there's a specific reason? Could you explain the different use cases for the different soldering techniques? Thanks a lot!

@ARTyRV 10 ай бұрын

Both ways are correct. Which ever way works best for you. The touch and go method is great for beginners! Thanks for watching!

@ohiopipper3956 Күн бұрын

I am going to buy a Weller soldering station. What size tip should I get for it to do stain glass

@ARTyRV Күн бұрын

1/4” foul and 3/8” for lead.

@taylorb.heydman3237 Жыл бұрын

Thanks for the video. Watching it for the soldering, which I need practice at. Did you spread the flux on the inside of the copper before tacking it together (or just the outside)?

@ARTyRV Жыл бұрын

Outside only! Thanks for watching!

@1Mona4u 8 ай бұрын

Termino de descubrir tu canal!! Me encantó tu forma tan clara y dinámica para enseñar! Al no traducirse el vídeo al español, ( y no ser mi inglés de lo mejor, pierdo algunos detalles. Quisiera preguntarte si después de colocar la patina, hay que limpiar el vidrio o solo se coloca la patina y ahí se termina? Muchas gracias!!! Ya me suscribí!!! 🙏👏🥰

@ARTyRV 7 ай бұрын

Yes, after applying patina, clean with glass cleaner.

@kathydesjourdy4607 Жыл бұрын

Hi there, Kathy from Massachusetts. I just got a microwave kiln. What are your thoughts. Love the two of you and the plethora of information you share.

@ARTyRV Жыл бұрын

Yes! You should be able to get started right away and learn all kinds of new techniques. You’ll love it!

@debratryanowski620 Жыл бұрын

Wonderful video…very informative and helpful! What iron are you using? Is 510 degrees C or F?

@ARTyRV Жыл бұрын

Fahrenheit. Thanks for watching!

@jaminejedly3297 Жыл бұрын

I did stained glass many, many years ago and have just got back into it. I forgot how hard soldering is or should I say how hard it is to make it look good. This video is awesome and now I'm heading down to my shop to try your methods. My soldering iron tip doesn't look like yours though. I'm not sure if it's because it's too hot or not hot enough. I have a Hakko. Thoughts on that?

@ARTyRV Жыл бұрын

Here’s our thoughts on the Hakko Iron kzfaq.info/get/bejne/gtagp9aonKjWeH0.html Thanks for watching and have fun!

@bees5755 Жыл бұрын

The tip about foil lifting up and trapping flux under it due to the glue melting away makes soooo much sense!!!! I was cleaning and cleaning and cleaning my peices and still getting the dreaded white mold! That must be what is happening!

@ARTyRV Жыл бұрын

Probably. Hope these tips help!

@texasmarshalls 8 ай бұрын

What are your thoughts in the Ryobi tool for soldering?

@ARTyRV 8 ай бұрын

They are not made for stained glass work. Not something we would recommend. Thanks for watching and great question!

@elizabethdickerson1136 Жыл бұрын

What actual temp do you recommend for 60/40 ?? I have heard a few different temperatures but I would love to hear what temperature you work at

@ARTyRV Жыл бұрын

60/40 melts at about361 degrees F. It becomes full liquid at 375 degrees. Experiment between those temps to find your best working temp.

@user-zg2vp1bs7o Ай бұрын

how and what did you use to put a hanger on?

@Artsrock36 2 ай бұрын

Thank you so much for helping me to learn I love you guys! I could really use some help please. First let me say…I figure your gonna think I’m missing some basics that are causing my issue but I promise you I know how to tin my iron, clean, solder etc. I’ve purchased several irons used the temperature control units always had problems with inconsistent heating. So I shelled out the bucks for a halo fx-601 thinking issues were over BUT… NO! I run temp on 360 however iron is always too hot or gets cold solder starts to bubble on iron or won’t hold a bead I’m so frustrated !!! Thanks to you I’ve learned enough to sale some pieces but this problem is about to make me throw in the towel because soldering is way harder than it should be! Any advice greatly appreciated.

@ARTyRV Ай бұрын

Turn the iron down a bit and it does take practice

@margaretwells1960 Ай бұрын

What are you wiping the tip off with?

@ARTyRV Ай бұрын

Damp paper towel

@Name-ot3xw Жыл бұрын

Wondering if you have a lead free solder recommendation. I'm going to make an attempt with Worthington plumbing solder that comes recommended from elsewhere. E: secondary question, have you ever tried your hand at PCB soldering?

@ARTyRV Жыл бұрын

Plumbing solder is not recommended.

@ARTyRV Жыл бұрын

Have not done PCB soldering.

@jillinnoliver2818 Жыл бұрын

So when you tack it, you how the solder iron down flat but when you are beading, you kinda hold the iron tip on its side ?

@ARTyRV Жыл бұрын

Yes, exactly.

@hiba Жыл бұрын

Loving your super detailed videos.. I'm searching and decission is getting back and forth which soldering iron should I buy that will last a very long time and worth the money.. I've recently saw you other video too about the hakko, which got built in rheostat.. But saw many rrviews onamazon that the temperature doesn't get high enough after few weeks of usage and it's not for larger works... could you please suggest me one? I'll be using led free soldering wires... should I go for the weller 80 watt or 100 watt or the hakko of your recent video? and another question... Do you use rheostat with the weller 100 watt aswell?

@ARTyRV Жыл бұрын

Thank you for the question. The Weller 80 or 100 would be the best choice for lead work. Both work great with a rheostat. We do prefer the Hakko for copper foil work. The Hakko comes with a 1/8 tip which is perfect for copper foil.

@hiba Жыл бұрын

@@ARTyRV Thanks So much! xD

@hiba Жыл бұрын

@@ARTyRV Btw may I know for how long you have been using the weller 100 watt one?

@ARTyRV Жыл бұрын

15 years

@ARTyRV Жыл бұрын

You must use a rheostat with the Weller

@Artsrock36 4 күн бұрын

How long does cooper foil stay good to use and does solder expire I have some foil from 2011 which still looks fine can I use it?

@ARTyRV 3 күн бұрын

Test it out, it should be fine.

@texasmarshalls 8 ай бұрын

Can you use this solder for sea glass?

@ARTyRV 8 ай бұрын

Yes and you will need wide foil

@Dsjdssl Жыл бұрын

Do you have to make the baking soda clean paste fresh each time? I always have a lot leftover

@ARTyRV Жыл бұрын

Yes we use it up. It keeps!

@bertkutoob 9 ай бұрын

@@ARTyRV Baking soda is dirt cheap and IMO one doesn't need to be stingy with it. I put a quart of warm water in a bowl, add 2 tbsp baking soda and 1 tsp dishwashing liquid. I then use an old toothbrush (electric is even better) to give the piece a good scrub. Then rinse in clean water and pat dry with a paper towel. When I've done with it I either flush the mixture away or dilute it and put it on the garden...

@robertoreyana6374 11 ай бұрын

nice video...I wonder if you can help me start my stained glass project. I am from el salvador and there is no way in this country to buy stained glass materials and tools. how can I bring them from USA to el salvador?

@ARTyRV 11 ай бұрын

I’m not sure. Have you checked with Bullsye Glass or Ed Hoy’s?

@lynnedaniels3407 Жыл бұрын

Good afternoon , was wondering how you can tell if your foil is bad I have like six rolls that I have not opened - but they are about 4 years old

@ARTyRV Жыл бұрын

Good question.if it’s been in unopened packages it should be fine.

@brendatolton5383 9 ай бұрын

Just wondering if vinegar and water would work as well as baking soda and water?

@ARTyRV 9 ай бұрын

Great question. Anything that will neutralize the acid will work.

@brendatolton5383 9 ай бұрын

@@ARTyRV 😊 Thanks ❤️

@ARTyRV Жыл бұрын

To learn more about the artists, visit their website conwayglass.com To learn more about the ArtyRV GLASS STUDIO, visit here: conwayglass.com/ARTyRV Copper Foil & Supplies a.co/bSJS2aR Stained Glass Cutting Tools a.co/4GcJCsn Stained Glass Chemicals a.co/6CsFQgl Stained Glass Grinders a.co/hKjtNRQ Kilns and Supplies a.co/8AjMPxt Stained Glass Soldering Irons a.co/7L1flWC Stained Glass Books a.co/9ri9QFj

@MICHELLEEVANS33 Жыл бұрын

Can you use Pearl Ex Pigments instead to get different colors?

@ARTyRV Жыл бұрын

Not sure.

@MICHELLEEVANS33 Жыл бұрын

@@ARTyRV thank you for your videos I will be buying supplies from your store in a total beginner and I love how you break it down

@jgdevoe Жыл бұрын

I noticed that at the intersection you didn’t get a blob of solder. My intersection’s always get a blob and then I’m having to clean that up which is difficult. Any suggestions?

@ARTyRV Жыл бұрын

Are you stopping at the intersection? If you’ll move through the intersection the iron should pull the solder on through.

@andrewlester5384 Жыл бұрын

👍👍👍

@jennyhoman195 Жыл бұрын

Is there a photo of the finished kite?

@ARTyRV Жыл бұрын

Yes at the end of the video. Thanks for watching!

@jennyhoman195 Жыл бұрын

@@ARTyRV thank you! I literally missed the last few seconds of the video. I went back and saw it. 😊

@brittbreeze23 28 күн бұрын

Tried to purchase from your Amazon store. Links are broken...

@ARTyRV 27 күн бұрын

Thank you for the heads up! We appreciate that. Here is the link Check out this page from artyrvglassstudio www.amazon.com/shop/artyrvglassstudio

@catherinemartina6469 9 ай бұрын

How about copper tips?

@ARTyRV 9 ай бұрын

Copper foiling tips?

@WithMunchkins Жыл бұрын

ive been trying to solder an 8" length, for the past 2 days. and it is not as beautiful as i would like it to be. KZfaq randomly put this video up after i watched something else, even KZfaq can see my need for help😳. using hakoFx601, MasterCraft 60/40, kokorode paste flux, and StudioPro tape(which i dont like), a narrow soft brush for the flux. ive got a fan 15" fron my face, pulling the air out, and occasionally wearing a 3m mask- can still taste the flux even though im not breathing it in. im ready to pray to whomever i need to, for help.

@ARTyRV Жыл бұрын

You need a fume extractor. Here is one for 30. That we have used when teaching classes.

@ARTyRV Жыл бұрын

Also, the Ruby flux does not smoke. It’s also in our Amazon store.

@WithMunchkins Жыл бұрын

@@ARTyRV i will try them! Thanks!🙂

@marandjoe Жыл бұрын

"double dipping" into the Patina isn't an issue? I keep seeing that I need to pour some into a different vessel to apply so I don't contaminate what's in the bottle. You obviously must not have any issues? Any unnecessary step that can be omitted is ok by me! lol

@ARTyRV Жыл бұрын

We pour a small amount of patina into a container and use that. Definitely don’t dip into your patina bottle! Also, you need a wide mouthed container so that it doesn’t spill. Thanks for watching!

@kathydesjourdy4607 Жыл бұрын

@@ARTyRV I put my patina in a spray bottle, I feel I am able to control it better.

@rebeccaferguson2434 8 ай бұрын

Do you ever just leave your projects with the silver solder?

@ARTyRV 8 ай бұрын

Yes, absolutely.

@redrognav1 Жыл бұрын

You don't use tip tinner? Have you ever? What are your pros and cons?

@ARTyRV Жыл бұрын

We’ll be talking about this tonight on the Livestream at 7pm

@georgteepe5539 8 ай бұрын

Copper foil work is hobby work. Stained glass is a whole different ball of wax.

@ARTyRV 8 ай бұрын

Tiffany was a big fan of combining both methods. We are too! Thanks for watching!

@ARTyRV 8 ай бұрын

More soldering secrets here: kzfaq.info/get/bejne/Z6eJZN2n3MDPcWg.htmlsi=Or2MqNyiiF1_XOw5

@zeph3963 Күн бұрын

I'm so fustrated. My soldering iron is new and nice and shiny, it's hot enough, but still, the solder does't stick to it!

@ellagregory818 Жыл бұрын

I thought that patina was dangerous stuff ? You don't wear gloves ? So it Doesn't burn your skin ? I read the bottle and it had me a nervous wreck to use it lol

@ARTyRV Жыл бұрын

Yes, gloves are good especially when using it for many projects and throughout the day. Wash hands and wear gloves.

@ARTyRV Жыл бұрын

This is a good video on making jump rings. kzfaq.info/get/bejne/g9SmmrqQvLadhnk.html