Standoblue: Blending-in Guide

Рет қаралды 8,445

5 жыл бұрын

Halo's and visible transitions are the most common problems when blending-in high metallic colours. With Standoblue there is a fast, reliable and repeatable process, which will help you get consistently good results as we show you in this video.
For more videos subscribe to our channel or visit bit.ly/2wScn8F

Пікірлер: 21

@user-cg3em1uc7f 5 жыл бұрын

it's a very good instruction, thanks a lot!

@kimojoseph6013 4 жыл бұрын

Thanks 🙏 for your information ℹ️ brother keep it up 💪💪💪👍👍👍💯

@tank881680405 5 жыл бұрын

Thanks a lot

@DAVIDEPWDD 5 жыл бұрын

That's text book yes it works well .... after spraying it for sometime now a faster way that gives as good or better results is to start from the left blend..... goto color then go back over the area starting from the blend area then continue wet all across.....and overlap slightly in the center... less chance of dry spots and the appearance is even better....helps take out a few more variable that may have caused a technical issue...... that should be added to your tech manual as another alternative..... your welcome

@StandoxOnline 5 жыл бұрын

Hi!! thanks for your comment 😊 Our TDS offers two blending methods ensuring best practice and getting the job right first time. Customers can choose which fits best for them. 😉

@DAVIDEPWDD 5 жыл бұрын

@@StandoxOnline thanks....... I wish the brand had better support in north america.... Love the product

@patrickcoyle6831 2 жыл бұрын

Hi. What about air pressure are you using for the blends and main repair covering? Thanks

@StandoxOnline 2 жыл бұрын

Thanks for your question. As our technician had only a little space in which to blend on the rear fender he reduced the pressure to 1.6 bar to keep the overspary down and reduce the blend zone. For the rest of the repair he used 2bar to apply the colour and blend the front door.

@pawegotlib5549 5 жыл бұрын

Are you spraying only one coat? Don't need more coat's? I mean one wet coat, second middle and last dry coat of base? One time is enough to cover a primer?

@StandoxOnline 5 жыл бұрын

Standoblue is one of the best covering Basecoats in the market. For the majority of colours 1.5 coats are enough to cover filler spots. Apply the first coat as a wet closed coat (but do not overload). Coverage has not to be achieved in this first coat. Continue with an uniform effect coat with greater distance to the object and close overlaps. Please see also application guide and mottling control video, here you will find full guidance and explanantion. Thanks for watching!!

@pawegotlib5549 5 жыл бұрын

Thanks, I painting with standoblue now and I am happy and proud for your products. :D Before I used another company and also waterbased but I prefer standox. ;)

@aviationtechops 5 жыл бұрын

You never want to spray wet coat especially for silver mottling is what you would get with a wet coat of silver

@StandoxOnline 5 жыл бұрын

@@pawegotlib5549 we are happy to hear that!!! Thanks :)

@StandoxOnline 5 жыл бұрын

@kolorkingsocal Not sure what you mean, but for sure we are not spraying a wet coat. The process in the video is how to use the product correctly, and is how we developed it to be used. Thanks for your comment.

@florinm9291 Жыл бұрын

same video for 2 "diffrerent paint brands " , it may be the same mother company but the behaviour of the 2 are way too different , i find Standox to be a bit easier for the painter compared to Cromax pro witch im kinda pulling my hair off ! and im not the only dude that thinks Cromax is a bit harder to work with ! nonetheless keep it up and thx fpr sharing these tips with us ! Regards !

@StandoxOnline Жыл бұрын

Thanks a lot for your comment and that you are using our refinish systems.