20 years ago I was a clean up truck on a local mall plow crew. I had the only Fisher in a bunch of Meyers and Westerns. I never had an issue during one of the worst winters on record here in NEPA. One night the boss asked me to go down to the other store lot and start the clean up until another larger truck or loader was available. 3 hrs in and i had to call for the loader as I had finished the whole lot with exception of the wind rows on a night a 12-14in snowfall. After that one of the othe drivers came for me to help plow the access road. He was ahead of me struggling with his ****** plow and was amazed that I was not only taking on a full blade but at speed the Fisher was throwing the snow over the guard rail without problem much like a commercial blade. I have been using Fisher Plows ever since. Even though I no longer plow commercially I still own and always will own a Fisher.

All we run up here in New England is Fisher for about 90% of plows on the road, they 100% deserve their reputation of being tough as hell and one of the best mounting systems in the industry.

I'm running a 8ft snowex straight blade this year on my 1500 so far it's working amazing. I love the down force mode it has, when back dragging it brings everything with no losing snow when back dragging.

Don't know if anyone notices the similarities on the Snow-Ex plows and Fisher Plows. Right down to the hand held controller. Fisher and Snow-Ex are owned by the same company. However been in Maine my whole life and Fisher is built here. Run many of them from straight blade to the XV2. You cannot go wrong!

Love that you go to these shows and talk to attendees not just exhibitors. As well that you give those small vendors a chance to show what they have as well. Keep it up

I don’t live in an area where a snow plow is needed but I still enjoy seeing different types of equipment.

Yes I run FISHER And have for 5 years now ZERO issues

I love fisher got nother but positive things to say about them. I ran a 8" HD stright blade for 5 years with no major problems at all just regular mantaince, fluid change and a hydrualic hose . I now just bought a 8'6" XV2 stainless, see how i like that this winter here in Mass.

The light up rookie rods are cooool

You can't beat a Fisher. I always wanted to make the switch and this year I did, a 9.5' Stainless XV2. We only had one dump of snow so far, but the thing is so bad ass in every way...and soooooo sexy.

Fisher xv2 plows are great, good grade scrape, you can stack snow very high if need be with fister pushplates and plows. I smacked a rock that had snow over it and couldn't see it at 15 to 20 miles an hour and it barely scraped the plow. I love it

Stan I cant believe all the years you've been in the biz you never tried a Fisher blade !! They are by far the best built blades out there ! Ive ran Western,Curtis, Meyer, and Boss and the Fisher is built way better than any of these and the cutting edge is way better it will cut thru ice and hard packed better than any other blade

Fisher plows are hands down the best of the best

You'll never find a tougher, better built snow plow than a Fisher. That's all I will put on the front of my truck.

Fisher is the best in the business. Been running them for fifteen years. Love em!!

I own 6 fisher XV2 plows and I love them . a good operator will be able to cut normal plow time by a 3rd using the XV2 V-plow . I own 1 8.5 ft v-plow and 5 9.5 ft v-plows .

I've had my ThermalBlades on my semi for 5 years year round, love them!

I plowed snow in RI only used FISHER products (plows and spredders). Minimal preventive maintenance and no in storm breakdowns.

New Hampshire seems to run fisher primarily every company I’ve plowed for uses them, never had a complaint.

Damn, I love looking at all that snow removal equipment. Thanks for showing us all those expensive toys.

The Toro Multiforce / Grandstand @ 22:38 looked real interesting. I have to admit that I have not tried a Grandstand, but I did have a stab at using a Groundmaster, which is a very similar unit, but with a seat instead. When it became winter, we would get the plow on it, and use it for all the detail work, which it was really good for. Just … put new tires on it when it starts to snow, or you will be spinning the winter away. 😁

I love my 8.5 fisher ez-v, it’s older but works excellent, simple design

My father has a steiner 230 diesel mower with a 72in deck. Thing is an absolute beast. Use to use it for a few large acreage lawn accounts in high school

The lit markers are sick. I'm getting a set! I love how you beast everyone for information.

I run that fisher stainless v plow you showed love been running fisher for 31 years

Worked at Fishers in Rockland Me for years. Good stuff.

Have 3 snowex speed wings and absolutely love them simple to operate and tough as nails.

i run a towing business and we use the amerideck power decks for motorcycle recovery and they are brilliant

Hey Stan, noticed you skipped over the Meyer booth in your video. If you are drooling over Fisher then you really should check out the super vee 3. From Maine and that all I run. I’d pass over the plow built here in Maine for those. I run three of them on my trucks. Heavy, well built, and 5 year warranty. Thanks for the Arctic plug. Looking at getting one right now.

Great video Stan! An idea for a future video this snow season would maybe to get the main snow plow manufacturers (Fisher, Boss, Snow Dogg, Western, Snow Ex etc) and test the current offerings in an unbiased shootout :). Now THAT would be #amazing!! I think alot of us who are in the market for pickup truck plows would really enjoy and benefit from it!! Keep up the great videos!!

I have ran Steiner equipment, my opinion is, they are excellent. Very versatile, low down time, easily maintained, add on options out the butt

Thank you for the chance to see all the new stuff keep going to the shows I don’t have a chance to so this is great for me

Hey Norm! Past operator for Reliable at the ATT and Fedex sites off SR77. I ran the Terex backhoe with an Arctic pusher with Dave Rezonica's crew. Hope all is well. Keep up the great work.

I run stainless fishers, but I just recently found 36' lighted plow markers and I'll never go without them again. A lot of the older halogen headlights can also be converted in many brands to leds without paying an arm and a leg too!

Brian’s lawn maintenance, eat your heart out😂😂😂😂🤪

I seen a snow dog on the front of a cab & chassis here in Milwaukee. Driving on the freeway, with the glow sticks on the blade. I looked in my mirror and thought he was driving backwards! lol

I drive that switch and go truck in the video. I work for the company here in grand rapids. I Love the idea of the bed being switchable. The truck handles it well even when overloaded with salt. However, when there's a chance for a weight transfer between sides of the truck it is noticeable that the "bed" isn't connected. Also, Snellers' is not running any sprayer trucks despite that they demoed that at the show.

I've had an Amerideck now for about eight years, love it for what I do in lawn maintenance.

Fisher is hands down the best plow ive ever used, they also make western plows nowa days.

The Weston snowbroom looks just the the SnowEx. We use ours for spring cleanups also. The Trade Show videos are always great!

We had two steiners at where i work for the state of Minnesota. We got rid of them for a bobcat utility side by side. Guys kept on pinching their hands because they articulate in the center and get caught against the cab and controls, plus if you are tall and you hit a curb you can smack the windshield with your head becauseof no give. My boss broke two with his head.

love my fisher plows really reliable and easy to repair

Hooklift seems to make a lot of sense to make your truck fully versatile to every season. Dump, snow, flatbed and specialty uses, all with one vehicle. Drop off a dump box and move on to other duties.

Juan Ysquierdo here again from Holland MI snowraider is number one friend if the shovel crews

Dang....didn’t know you guys got a wicked snow storm!😂 & boy did it melt quick 😏 Thx Stan for giving us a look at these types of vids, especially, when we’re not able to make it out to the shows/conventions. It’s nice that we can still “be there” with you! Not going to make any shows/conventions this year....not a one; so truly appreciate the vids. Cheers😊

Reliable Snowing is literally minutes from my house. Norm is one of the biggest snow removal and salt companies in my area.

I work for the company that uses the switch n go system at the show. I can’t really comment on how well the spreader works but the real payoff comes in the summer where we’re able to switch between dump and pruning beds. It makes hauling and loading equipment in the summer possible without needing extra equipment. I believe any truck that gets this system needs a custom frame built for the system, I believe it’s part of the price. But you can save some $$$ if you can weld them yourself. we got one to see how it worked, then our mechanics copied it for the other trucks.

Started putting Fisher V plows on all of our new trucks. Wouldn’t buy anything else currently on the market. They are the toughest plows out there.

I just got my first snow ex power plow 8611 8’6”-11’ 10’scoop with the scrape maxx down pressure kit. I ran western wide outside for the most part and they are made on same line but a few differences. Western said it be a month or so to get my new wideout XL but had my snow ex with in a few days. So with snow falling I took a chance to try it. And satisfied Snow ex is a all hydraulic ram lift were western was a hydraulic and chain. Plus you can add the scrape maxx down pressure witch has been great for back dragging or when you need to scrape a bit harder. So far i like it as much as my wide out the scrape maxx is the only difference/plus so far. And for about a $1000 less then wide out I’m very happy with it and it’s price. Another product I just got was thermal blades The one thing I like over everblade I do not need a switch to turn them on and off when it hits 38° they automatically turn on so no having to forget to flip the switch

I run the stainless steel Fisher plow on all 25 of my trucks no issues at all

Do yourself a favor. Invest in a Toro multiforce! The company I work for has 3 that see year round work. The snow plow works great! The snowblower and sweeper are awesome as well! We also have the Buffalo blower attachments and Holy crap talk about a time saver for fall and spring cleanups! Not to mention the mowing decks and it's cut are second to none!

I own a snowex 8611. I love the size and versatility but I would say the only down sides to it for what I do is 1. How little tolerance there is when hooking up to the plow. I take my plow off often and am getting more comfortable with it but at first it seemed like you had to be perfectly centered with it in order for the frame to raise and connect perfectly especially compared to a western ultra mount. Super nice not having to walk to the other side of the plow though! 😆 2. The moldboard curls forward more than a western wideout (and fisher wideout I would assume) which doesn’t allow you to “throw” the snow as well when doing roadways. Not bad if you mostly do parking lots but I do a lot of roadways in small townhouse and condo complexes so I would like to keep the roads opened up easier (as I’m sure the Mvp3 and new style wideouts with the flared wings are good for). Sometimes I feel that the snow falls back into the road if you aren’t going fast enough. Thanks for the great footage!

My fisher xv2 is nice and my western too but I want snow ex, I am from icey new England and it's a nightmare trying to backblade anything. Also run kubota l6060 and we are going to try and get another too. Definitely going to get a smaller artic when it fits in the budget.

We have 2 multi for at my work we use for really small tight areas and sidewalks. That machine looks mean man

I’m running a snow ex 8611. So far I love it. The led headlights are amazing and I get a good scrape with the down force.

I work in the public sector and this year the big stink is salt conservation and not polluting drains and lakes. For the private sector do you do anything to keep an eye out for that?

The switch and go system is amazing, two on the road we have two more being built.

Hiniker and Fisher are the only 2 plow makers no one complains about.

My company runs a snow raider. Great for sidewalks. Also...... Glad I'm in a truck.

It’s nice he took you all the way down to Mexico to go 100 mph on an on ramp in a Tesla.

I got a lot of good info from this video. You did a great job

Plowed last winter with multi force it's quick. That blower should be made 44 inch so you can go down side walks also

I'm a Ventrac believer myself as well. But there was some really cool equipment to look over.

We have a Toro snow blower, they do a great job of blowing snow I've not had my hands on anything better then a Toro snow blower.

I basically built a large scale version of the Switch N Go in my backyard with my welder and local steel yard supplier.

Stanley "Dirt Monkey" Genadek I just love watching your videos Stanley!

Cool toys! Don't think we'v e had a frost yet this year, down here - but some of the southern ranges could sure use some of those machines.

I have run a fisher plow for going on 14 years this month they work good I have no complaints except the light but this ones older then the ones now so

Makes me want to get back in plowing again

The fisher X2 is a great plow.

It was nice meeting you there

Everblade's heated wiper blades are no joke!! Ran them for the past 4 years and so far I swear by them for plow vehicles. Great build quality and super easy to install. Snowdogg plow marker lights: pretty kool idea, I have never seen this but I am sure in practice these are not only helpful to pedestrians but also to the plow operator in low visibility situation, such as whiteout. Snowdogg plows are decent but my picks are Fisher (#1) and then Boss (#2). I ran a Snowdogg 6'-8" on my old truck and even tho that plow did soo much for me, at the same time, I had endless electronics issues with that plow. I would like to hear some more information on those new Intensifire LED plow lights from Fisher, those lights look awesome! Would love to see how that stack up against the Boss lights. Also, I am curious if you can retrofit those lights onto older models, cause I would love to upgrade my plow lights on my Fisher to those if it was possible and not too expensive.

I don't plow snow but as a long haul trucker I would love to have the heated wiper blades on My Truck

It looks like it is going to be a big year for plowing bring it on.

I watched your snow plow videos. It seem like with all the snow you had this last winter, you could've used a tele handler forklift with a bucket attachment to really stack the snow or a blower attachment for the skid steer/ loader to blow the snow further back and higher so you don't run out of space as fast.

All that stuff is crazy I wish I had the money to get my business as big as yours

Those light up plow guides are awesome!

I will be buying heated wiper blades for here in Minnesota!! I have been wanting them for many many years!! I wish I had invented them.

You said when you go heated wiper blades you never go back to original blades. It’s the same way with fisher plows. I’ve run fisher for years and I swear if you buy one you will sell all your other plows because they just can’t compete.

Love your vids greetings from Serrano Landscaping from the Chicago land area thanks for the info

Thanks for the resources stanley.

Should get a chsssie cab truck and get it outfited with a hock lift system and see how well it works

Hey Stan, the Arctic sectional was a game changer like 10 years ago. You are a little late to the party for being a snowplowing guru. In case you didn't know the cool kids are all about the Metal Pless

That Toro multiforce is badass

I miss winter! I can’t wait for the snow!

Your in NASHVILLE! ! 10mins away

We run all snow ex power plows here in buffalo, will never go back to a straight blade or v plow

I work at switch n go and built those salt spreaders!

I need some of those heated wiper blades on my tractor

Unfortunately it doesn’t snow much in Philadelphia anymore however after watching your videos I want to move north and buy an Arctic plow.

I had a Steiner before I got my Ventrac. Personally I like the Ventrac better. Less Vibration, and smoother operation.

Fantastic showing all the new options loved it

I think that's the baddest stuff you've ever shown

Metal Pless is the best people that say its not have never ran it

We have one of those walk behind brooms with the plow. Ours is a snow ex but looks exactly the same and has the same honda engine.Works awesome for sidewalks. We also use it a ton in spring,summer and fall we take the blade off and use it for cleaning up dirt on walkways driveways etc.

You should do a metal pless vs artic review!!!!!!

I know you love Honda, but I love Kholar. Most mowers have Kohler or Kawasaki. I love Kohler.

You should pick up a fisher xv2 in stainless steel you won’t like any other v plow besides that one.

Thanks again for sharing your info on snow equipment just great 👍

Got 9ft fisher love it wont switch to anything else