Starting My Engine Build! | RM250 Rebuild 11

Рет қаралды 948,353

4 жыл бұрын

★Enter to win my RM250 when it's done! www.prymemx.com/pages/rm250gi...
★My Store (Pryme) www.prymemx.com (Wheel giveaway has ended)
★Video Sponsors
Rocky Mountain ATV/MC (Engine Parts) cjn.mx/rmatvmc
★RM250 Parts List www.prymemx.com/pages/rm250
★Tool List www.prymemx.com/pages/tools
★Supplies Used In Video
Engine Stand cjn.mx/enginestand
Crank Puller cjn.mx/crankpuller
Clutch Holding Tool cjn.mx/clutchholder
Steering Stem Bearing Installer cjn.mx/steminstaller
1/2 in Torque Wrench cjn.mx/prototorque
Pro X Connecting Rod cjn.mx/proxrod
Pro X Gaskets cjn.mx/proxgaskets
OEM Suzuki Crank Main Bearings & Seals cjn.mx/oemsuzuki
Hot Rods Transmission Bearings cjn.mx/transbearings
Tusk Clutch Springs cjn.mx/tuskclutchsprings
Tusk Engine Oil Seals cjn.mx/tuskengineseals
Tusk Counter Shaft Seals cjn.mx/tuskcounterseal
Tusk Oil Fill Plug cjn.mx/tuskoilfill
Maxima Grease cjn.mx/grease
Maxima MTL Gear Oil cjn.mx/mtl
Anti Seize Lube cjn.mx/antiseize
Rubber Gloves www.prymemx.com/products/rubb...
Torch amzn.to/39kFq5b
Y Handle Tool amzn.to/3bqnkjB
Mini Bottle for oil amzn.to/2ybJgRf
Medium Strength Loctite (Blue) cjn.mx/blueloctite
High Strength Loctite (Red) cjn.mx/redloctite
Starting My Engine Build! | RM250 Rebuild 11
★Business/Social Media
Pryme www.prymemx.com
Instagram / cameronniemela
Facebook / cameron.niemela
★Camera Equipment
cjn.mx/camequip
★Ways to support the channel★
Bookmark the affiliate links below to make your purchases on Rocky Mountain or Amazon.
Rocky Mountain: cjn.mx/rmatvmc
Amazon: cjn.mx/amazon
★Send me mail:
Cameron Niemela
PO Box 704
Deer Park, WA 99006
#TEAMPRYME

Пікірлер: 725

@rmatvmc 4 жыл бұрын

A 38 minute video is exactly what we need in these times. You are the man, Cameron!

@NOONE-hp8bw 4 жыл бұрын

Excuse me its 1 second off of 38 minutes

@tracyholcomb4805 4 жыл бұрын

Masu some editing softwares do that, the time is off somewhere lol

@kaiden4873 4 жыл бұрын

RM Mc where’s my discount 😂

@ShortBus199 3 жыл бұрын

38 minute video that I couldn’t take my eyes off

@celidarqs6861 3 жыл бұрын

@@NOONE-hp8bw q11k E

@christianlockwood4314 4 жыл бұрын

I cant wait to hear it run, the sound of 2 strokes is my greatest weakness.

@gmx0413 3 жыл бұрын

I know🥵

@GoogleOns-ys9ms 2 ай бұрын

@cbadnc9040 4 жыл бұрын

"Lube on the shaft before you shove her in." Cracking me up!

@robertwoods2505 4 жыл бұрын

Wow, I am blown away at how great that engine came out. It looks much better than new. I can't wait to see the top-end go on. Keep up the great work Cam!

@robertpintaric1033 4 жыл бұрын

Good job, I was at KTM Motors in Austria for a year, 20 men in a row, 300 engines in an 8 hour shift. Nice to see an engine, very slowly. Greetings from Austria, Robert

@accipiternisus649 2 жыл бұрын

Reci mi onaj semering do kvačila, da li zica na njemu gleda prema radilici ili prema vani tj prema korpi kvacila?

@AudreyH48 4 жыл бұрын

This build is so clean! Really love seeing the detail and time put in! That's what I would call a Pryme Build.

@KincadePavich 4 жыл бұрын

Damn that bottom end is CLEAN! So stoked to see it move forward! - Kincade

@premixpeter1972 4 жыл бұрын

My OCD absolutely loves these vids. So good and refreshing to see such thorough, detail oriented work in such a clean workspace! 👌👏

@greengo67 4 жыл бұрын

Excellent video Cameron, amazing detail and great video quality, essential viewing for anyone planning on doing this for the first time. In these weird, weird times, these videos mean more to your audience than ever! I've watched lots of engine/transmission rebuild videos over the past few years (yours included), but this is the best one I've seen.

@123MRbryson 4 жыл бұрын

Nothing like seeing Cam upload a video and liking it before you even start watching 🤙🏼

@brants1185 4 жыл бұрын

Love you cam! You always produce the best videos on this and I’m so happy with how humble you after all you have been through! Keep pushing!

@blaketurner6492 4 жыл бұрын

This bike is going to be freaking sick. I'd love to be able to have one of your builds. Itll def be a trophy bike. 💪

@vonwilhite6106 3 жыл бұрын

Cam: "This one's being a little stubborn" Also Cam: *Proceeds to murder it with a hammer"

@SuperLaplander 4 жыл бұрын

So nice to watch! Thanks Cameron for showing us how this is done.

@interstellaraxeman4468 3 жыл бұрын

Having watched your channel for a while out of specific interest to "see it done" as the visual roadmap, it has become clear to me that beyond those initial reasons of clarifying unseen things that seem mechanically challenging, it is the way you present the steps that leaves the lesson shown with the takeaway of value, which is to do it right. Clean well lit workspace, camera work very revealing and non hindering, the results from viewing are always very motivating. As the time went on watching these videos when others were "recommended" by you-tube, I always come back to yours. They are the best for me, and I appreciate each one. Helpful? Extremely,.... Just so you know, I like it when you err or miss a small detail then catch it and show it,...that, because of what these are to me and likely many others, is a GOOD thing. Sometimes,....I wonder if you do it on purpose to be humble but you know thats the thing to be shown as it is the thing to look out for. Other than the builds and processes, everything I have seen is influencing how Im setting up my space. I guess it is reasonable to say a great teacher can also be entertaining, and you are those things. Thanks Cameron

@carsonpasanen7060 4 жыл бұрын

This is a way to pass time during the COVID-19

@jvinsnes 3 жыл бұрын

Havent had time in 2 years. School handins with unhuman deadlines lol

@TN_HondaDad 4 жыл бұрын

29:10. If ole Abe knew he would be helping rebuild a 2 stroke engine in 2020.... though pennys made after 1982 are about 99% zinc now. (Even softer metal than copper) Little trivia for ya kiddos today. 😁 Love the rebuild- wish I had 1% of your engine building skills. 👍

@tylerbruno8668 4 жыл бұрын

love this build! that hint of blue and dark grey is perfect!

@alessandro.278 4 жыл бұрын

Tra tutti quelli che vedo mettere mano nei motori tu rimani quello piú professionale, sempre ordinato nei lavori e maniacale su ogni cosa, continua cosí , sei il migliore.

@charliem5332 4 жыл бұрын

It’s like therapy watching you work. Thank you.

@worpd_gamer270 4 жыл бұрын

Heck yes! I've been so excited to watch this build! Thanks Cam! Man that dry ice trick works magic

@kckane6630 4 жыл бұрын

Wow man, it's looking amazing!! You do some awesome work, I wish all mechanics took their time like you! I need to replace 2nd gear on my RM and after watching this video it definitely helped me with all I need. Thanks for sharing Cam!

@oldsbuilt8740 4 жыл бұрын

Thank you for putting out such great content. Your builds are always next level dude! I learned a lot from this one!! 👍

@forty2mx955 4 жыл бұрын

Another awesome video! Did build a 2001 CR250R engine a few months ago and decided to start doing some videos myself after watching your insane CR250R built! Keep up the good work man!

@caydentroup4616 4 жыл бұрын

I watch your vids all the time. They are the only bike builds I like cause people always talk and go shopping and show them doing something stupid stuff to a dirt bike for like 2 mins but you make really nice interesting vids and I learn a lot from them. Good way to pass time during COVID-19. Keep up the good work

@lucaparenti9944 4 жыл бұрын

The quality of your job is amazing, never seen something like this before....

@markarmstrong6697 4 жыл бұрын

Awesome video! It doesn’t get any better than this. Great job!

@MattPuccini78 Жыл бұрын

Amazing man very clear explanation ,video showing great variety of essential detail. YOU DEFINITELY ARE MY FAVORITE OFF-ROAD MECHANIC

@AP-ur1cd 4 жыл бұрын

Dude this popped up in my feed as I’m rebuilding my rm 125 and shi* perfect timing with the shift linkage. Much appreciated and your doing an awesome job looks great

@Danman1972 2 жыл бұрын

As a side note... don't get Loctite on the prowls for the shifter assembly. Been there and done that. Make sure the detent arm is flat and rolls well. The DR350 has the same set up. The shoulder bolt that goes in the drum tends to break. When it does it jacks that little arm up. I had the issue. Put it back together to find it still had issues. The roller on the end of the arm was tweaked and that arm was bent. Easy fix.... pain to get to.

@matthewcolburn330 4 жыл бұрын

Looks great bud, can't wait to see the rest!

@nielskiekebosch 4 жыл бұрын

once i loved to watch your brother building cars and now i bought a kawasaki 125cc and somehow i began watching your videos instead and they help me learn how to do things on my dirt bike thanks i love your videos man keep going

@CypressVintage Жыл бұрын

Dedication. Perfection. Commitment. Entertainment. Well done!

@jimmadonna1436 4 жыл бұрын

That engine stand is cool! Camera angles are perfectly done at the shift drum. I use pennies to and always have. Looking forward to the SF FORK disassembly and seeing what's up with them.

@nc.sous.8827 4 жыл бұрын

Bro, you the man. So glad you bounced back!!

@marclarden 2 жыл бұрын

That finished engine is a work of art just on it's own. I'd gladly display that at my house. 👍

@minecrackedgaming7654 4 жыл бұрын

So, I'm in motorcycle service technology for SkillsUSA and one of the hands-on tests was actually about pulling out the shifting forks and drum and measuring the gaps in the shift drum with a micrometer, the girl who went before me couldn't even figure out how to take apart the crankcase, neither did I... turns out there was 3 bolts I needed to take out first, I managed to take them out and I actually got 2nd place and was supposed to go to State but COVID-19 cancelled it (for those of you who care, the other 2 had to do with checking tire pressure, the lights, coolant levels, VIN, etc. and the second had to do with naming parts also, the bikes they had were Ninjas so I was freaking out internally)

@quadbengtsson 4 жыл бұрын

A Tip for installing crankshaft, Use a socket that fits prefectly in the bearing, And heat it then put in the bearing!

@rubencriviDT 4 жыл бұрын

That 37 min video was freaking sweet! Keep it going! And make a reminder so you don't forget later on to pour the transmission oil 😁 keep it pryme 👌🏼

@rubencriviDT 4 жыл бұрын

By the way it is a shame that the oil fill plug is not available in yellow, maybe red will fit better the Suzuki yellow colours? 🤔 Anyways is gonna look great!

@motomac8392 4 жыл бұрын

these videos are awesome. extremely professional and clean. I love watching dirt bike engine rebuilds.

@sil3nt302 Жыл бұрын

Love watching you work. Wonders from your hands. Wish you all the best.

@raymonddigiuseppe2953 2 жыл бұрын

Man it’s all in the details😍 it’s so clean!!!

@scottyboy8868 4 жыл бұрын

Dude...you are the man. Love these videos and the way you do everything properly. Shame you ain’t out here in Aus to help me freshen up my Kato SX 250. Would live to do a renovation on it with you. You and your lady keep safe out there and look forward to seeing the next video. Good isolation watching 👍😎

@cassiemiddleton9272 3 жыл бұрын

I have to say that your cr250 build has been my favorite so far , keep it up brother 🇦🇺🤙

@harrybenx3554 2 жыл бұрын

what i like is that Cameron has a clean and accurat working style...and so is the result of his work

@robertcorcoran5073 4 жыл бұрын

Hey cam when installing the crank in the crank bearings instead of torching the whole bearing try heating some old sacrificial sockets up that fit tight in the inner race. Heat the socket red hot, and hold it in the race until you feel it get looser. This focuses more heat where the interference fit is actually taking place. Works great for me!

@koltonpassey8989 4 жыл бұрын

Robert Corcoran That is an interesting method. I’ll give it a try! Thanks!

@kennistaokon8629 2 жыл бұрын

I like it d way u talk about it

@vortexsophia 4 жыл бұрын

This is a great video for a distraction during a dystopia. Your lighting detail is fantastic

@tomatoknuckles 4 жыл бұрын

As always dude flawless work. Hope your staying safe man🤙

@tannertaylor6946 4 жыл бұрын

Thank you for this long video to pass time! Btw looks sweettt!

@neal2608 4 жыл бұрын

Thanks so much man. So looking forward to the top end build video and eventually hearing this bike run.

@anilpun2592 4 жыл бұрын

Thats how you do the works. Always admiring your work brother

@benjaminc.m.9873 4 жыл бұрын

1:38 "sounds like i'm murdering the crankshaft" hahahahahahahhaha love that line

@jodoe22 4 жыл бұрын

Great stuff! I've got a KX250 engine apart and this will help with tips and tricks to have a smooth install.

@Dirt_Bike_Dave 4 жыл бұрын

That thing looking so nice and your videos are always so good about showing how things are put together..very informative.

@ethanbrown9692 4 жыл бұрын

i love these vids so much it’s really interesting to learn how these engines work. Maybe next a Yamaha 125?

@lenny3394 4 жыл бұрын

had 2 do it 2 em 125x

@teemill450 4 жыл бұрын

RM250 motor looking perfect. Nice work! Can't wait for more vids.

@CensusBruh 4 жыл бұрын

Legitimately a dream bike. Someone’s gunna be the happiest guy on two wheels, Keep up the amazing work man.

@brahmdempers1005 3 жыл бұрын

And i have a rmx250. Road version of the rm250. Eat your heart out! 😀😂😃😄

@CensusBruh 3 жыл бұрын

@@brahmdempers1005 the rmx is the enduro version of the race bike but that's super cool haha.

@ftball90 4 жыл бұрын

That motor is gonna be legit CLEAN when it’s all buttoned up. Great work.

@sawyertarnanen5580 4 жыл бұрын

Love the grind ur doing it helps with our quarantine. U should do a cry 110 videos.

@bogg690 3 жыл бұрын

Perfect video to watch before bed, everything in this video is so godamn satisfying

@ethanmarlow2630 4 жыл бұрын

Looks bitchin so far! Cant wait to see the top end. Btw I love how extensive, indepth, and detailed the rebuild video is. I've never done a rebuild before myself but I'm sure I will someday so this is extremely helpful to me. Keep doing what you do! Stay healthy!

@erniesimsek6637 4 жыл бұрын

Great video Cam and the engine looks awesome 👌 keep up the great work

@redrider2503 4 жыл бұрын

Tusk is the best!! You simply cannot beat the quality of their stuff for the price. Awesome video needed this during quarantine 😂🙄cant wait to see how the bikes turns out

@FEARLESS_MEMORIES 4 жыл бұрын

Best videos on KZfaq very detailed and amazing quality 1 day I'll attempt a rebuild when I get me a bike much love from Connecticut hope all is well

@gerardor4971 4 жыл бұрын

It's better than what I imagined!

@pink8693 3 жыл бұрын

Love that you explain things in detail KEEP doing that.

@Ethyn_Black 4 жыл бұрын

You’ve inspired me to fully rebuild my ‘83 Honda cr60 and do a mini build on my cr125. Love the channel can’t wait to see this bike done!

@RJE17 4 жыл бұрын

Ethyn Black do you have insta? I’d like to see your 125. I’m doing a mini build on mine as well

@justinfenton95 4 жыл бұрын

I'm literally putting my '94 RM125 back together while following these videos. Amazing content sir!

@mangyu5228 4 жыл бұрын

gigi nanasnya dulu pasang bos bru rumah koplinya

@Unknownas1337 4 жыл бұрын

Just watched the whole thing. Thanks for the detailed awesome video how to do this type of stuff!

@UlisesGlez26 4 жыл бұрын

Loved the video man, I always learn a new thing watching these videos, stay safe and keep wrenching!

@danielvrana9444 3 жыл бұрын

Man that was great 👍🏻. You explained everything. Thank you Dan

@darweed140 4 жыл бұрын

Thanks cam. Building my 97 rm250 and this was awesome.

@jaredamoroso8273 4 жыл бұрын

Man that motor is looking great and great video. Definitely have been looking forward to the build.

@garethmayfield4014 4 жыл бұрын

love watching you work fella. craftsman at work.

@joski9030 4 жыл бұрын

Heat and ice my old man taught me that method god bless him . Rip dad I’d sure like to be in the garage with you now. ✌️

@dimitri8285 4 жыл бұрын

Jo Ski sorry for your loss

@shaunkennedy3916 4 жыл бұрын

Your videos are top notch. Learning a lot from you. Keep it up! Thank you!

@PrimeRepair 4 жыл бұрын

Badass vid Cam, keep it up.

@petersteyn7477 2 жыл бұрын

Beautiful assembly, well done!

@tribalbc 4 жыл бұрын

Nice videos. Good clean work on the rebuild. I love the heat cold method, always say work smarter not harder. I personally will put the crank in the freezer for a few days. Then assemble transmission first, drop in crank, and then quickly heat up other bearing and drop on the other side. With some systematic tapping on cases and transmission shafts she will fall on tight without a crank puller. You can pre install the seals if you place a slug over the inner race of the main bearings and heat the slug with the torch. Speaking of crank seals I hate to say it but it looks like you got the RH seal on backwards. RM's unlike most 2 strokes you want the lip seals facing the transmission.

@claycarlson2783 4 жыл бұрын

This quarantine sucks! But I guess it's necessary. Glad to see you're back at it! BTW I loved your CR250 build.... NICE!!

@RobertLes 4 жыл бұрын

So detailed and clean ! Awesome Cameron

@wille0113 4 жыл бұрын

Watching your videos made me want to get a dirt bike, especially after the CR project. I already have a street legal supermoto but there's something about those knobby tires and the smell of 2stroke... Therefore, I'm going to pick up an '04 CR 85 this weekend, and have some fun with it. Keep up the good work!! Cheers from Finland!

@RidePittsburgh247 4 жыл бұрын

@16:22 Best plug ever ! Lol look at that bike shine!!!!

@petrolheadfamily6465 4 жыл бұрын

Ones again brilliant .im learning very easy with all your videos . I just got me a ktm she old. U give me motivation to make videos of cleaing and learning about bikes

@andreabarba1178 4 жыл бұрын

i will never stop watching your videos you are wonderful cameron. 💪 the best

@triplec3804 4 жыл бұрын

Dang , this is digital heroine! Ive got a rebuild woody ! Dude, seemed like only 5 minutes. Keep’em coming ! 👍🏼

@bryanschmitt1041 4 жыл бұрын

very good brother, I'm from Brazil and I follow your videos, more top content, renovating the bikes is very nice, congratulations

@jorgelopez-jf2kg 3 жыл бұрын

Very clean job, Cameron!!

@fullthrottleentertainment5506 2 жыл бұрын

no one goes into depth like you bro

@Deploracle 3 жыл бұрын

It's nice to hear so many people resurrecting these 2-strokes.

@JimmyKeane825 4 жыл бұрын

Your pumped, I'm pumped, let's go!

@toddj.8245 2 жыл бұрын

a great video very informative really awesome thank u cant wait to see finished product and love the engine stand

@sendmemes5474 4 жыл бұрын

I remember watching you years ago bro when you only had like 25K subs and you've come a long way man idk if you'll see this but good job and keep it up bro 🤙🤙💯

@daveb1963 11 ай бұрын

best video on youtube attension to detail is amazing thanks.

@ElektrzyczneBokserki 4 жыл бұрын

3:10 Its good to replace both gears working together, even if only one is damaged, just sayin' Keep up the great work! Greetings from Poland ;)

@talanrobinson2389 4 жыл бұрын

Sounds like you engine stand need oiled 😄 Motor looks amazing keep up the good work.

@kenjgood 4 жыл бұрын

Awesomeness! Best to you during the Quarantine.

@Moped-Frank 4 жыл бұрын

Awesome, very well done!!😍

@jaredromero9549 4 жыл бұрын

learn more in this 37-minute video than any of my online zoom classes

@padraiglynch6726 2 жыл бұрын

Whole purpose of a static gasket is, it's meant to be installed dry and can stick to both mating surfaces to seal properly. Grease is a good trick for certain appliancations, but for bikes where there's higher temperatures inside the case, it will eventually cause a leak.