I Bought An 800 HORSEPOWER NASCAR Racing Engine for my 1955 Chevy!

Рет қаралды 488,263

Күн бұрын

I SPLURGED on a wild Legit Ex-Competition Nascar V8 for my Street/Strip '55 Chevy Project! This is a RACING BEAST from top to bottom! It could have been on the front row at Daytona 2004! These super high compression V8s live over 8000 RPM and should make even more power than it did in a Nascar (750HP or so!) and Tony Angelo and the Stay Tuned crew are going to put it to the test!
Thanks to Wilson Race Engines for the Dyno time!
Wilson Racing Engines: wilsonraceengines.net/
---------------------------------------------------------------
CHAPTERS:
0:00 - Intro
2:40 - What is an SB2?
7:28 - Wilson Racing Engines Dyno
24:40 - Making CRAZY Power!
25:52 - Carb Tuning
29:00 - More Pulls!
---------------------------------------------------------------
GRAB THE NEW STAY TUNED SHIRTS AND GEAR: tangeloracing.myshopify.com/
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Mike Kunz: / mikeslim
Tunes by The Subtastics: subtastics.bandcamp.com/
----------------------------------------------------------------
MY PARTNERS:
Holley: holley.com/
Summit Racing: www.summitracing.com/
Wirecare: www.wirecare.com/
QA1: www.qa1.net/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!

Пікірлер: 1 800

@user-pd7dt6vr5u 4 ай бұрын

So I sit here watching this and I'm crying because my dad died on November 3rd 2023. He was an old school drag racer. He had a 66 442. Was a street racer as well as a quarter mile racer. We are from Whitman M.A. he raced at New England dragway. His name was Richard "Dicky"Coughlin . My dad my best friend. He loved your channel. I introduced him to it like a year before he passed and he loved it! Just wish he was sitting next to me watching this! Thank u for your hard work in making a great channel.

@davidhamilton7628 4 ай бұрын

Sorry for your loss man

@StayTunedTA 4 ай бұрын

I'm really sorry for your loss bud. Your Pop sounds like a heck of a guy.

@Jeffroson78 4 ай бұрын

My dad died August 14th 2023 unexpectedly after he got a clean bill of health great CAT scan he died four days later and he was big time into racing himself that man meant the world to me and then some he leaves behind three boys his wife and brother-in-law and I'm trying to take care of everybody here and it is so difficult I just want to go be with him I would give my soul for him to be back for 5 minutes I don't care I'm so sorry for your loss

@Brock_Landers 4 ай бұрын

I can't begin to tell you how sorry I am for your loss. I didn't have any real racers or fast car lovers in my family growing up, so my uncle got me started working on cars, but it was experience that taught me how to work on cars. I taught myself how to build engines, and I built a 4g63t Mitsubishi turbo engine that made 534 whp, and then I even built a Honda 1.8L four cylinder that went on to make 709 wheel horsepower. I have always been about import cars because of Fast and Furious came out when I was 18 and at the time I had a 302W swapped 1994 Eddie Bauer Explorer that I installed an Explorer Express supercharger kit on and it was also jacked up with a Skyjacker 6" lift with 33x12.50 Super Swampers on it (but it was still only 2WD). Right now I have a 2013 BMW 135i as a daily driver, and I have some bolt on mods and a tune, but it's a daily with a warranty, so I can't get too crazy with it. Still, I'd LOVE to build a high horsepower domestic someday before I die.

@Jeffroson78 4 ай бұрын

@@Brock_Landers that is absolutely amazing man yeah I used to be into it big time and I'm 46 now and I used to have a couple of Kick-Ass cars I had a 80 Malibu wagon with a 400 small block that made 700 horse back in the early nineties it was a fun ride and I had a 94 Mercury cougar 4.6 with a turbo on it ran fantastic I got my dad's Silverado now it's an 06 it's lowered to the ground getting tired but I'm going to fix it all up as everything starts falling apart but that's part of life I guess that's amazing man God bless you and your family

@josephyentz870 4 ай бұрын

These guys are legit. Dude running numbers in his head is impressive.

@StayTunedTA 4 ай бұрын

Yea they were killer to work with!

@williambehles7704 4 ай бұрын

@@StayTunedTA Comes from Lots and Lots of experience.

@SenorSenorStacks 4 ай бұрын

Honestly, I didn’t know that was something a person could do… I bet dude and his dyno is the stuff of nightmares for hype beast engine builders

@gordocarbo 4 ай бұрын

@@StayTunedTA Awesome, my dream engine! Love to see this in your 55 running . What trans are you going to run

@timothybrown5364 3 ай бұрын

&nojuI hi] @@williambehles7704

@philipcalderone8092 4 ай бұрын

Man the ol school footage of ol boy Jenkins rippin gears with a stogie .... wow real man right there

@heftycat 3 ай бұрын

I got the same vibe as if I were watching an old school boxing bout where all the cameras were on the sides of the ring....just like something epic about that!

@adeadlyfart13 3 ай бұрын

Back when men were men! This younger generation just has no idea. Now I sound like a boomer, oh well.

@user-mp9rd4hg8b 2 ай бұрын

That's how I shifted my 1980s, high school-built "street racer." (69 nova, 350 with a 3 speed) Good memories.

@anthonyholleran9378 2 ай бұрын

Amen! Simply Awesome, Old School Cool, Baby! The Absolute Best! Old School Cool will Never Die!

@cringram1003 3 ай бұрын

$12,500 is a awesome deal Tony you scored. Would be perfect in a sprint jet boat. Enjoy

@kencleg7721 3 ай бұрын

Agree boat drag engine

@royb.1441 2 ай бұрын

Yes I am glad he told the price because that is awesome to see a deal like that

@yankeedoodle7693 4 ай бұрын

25:04 when the dyno guy nods, you know its good

@StayTunedTA 4 ай бұрын

Yea he was very happy with the results!

@whatta7793 3 ай бұрын

@@StayTunedTA I wasn't even there and so was I. Dyno guy is a true class act who knows this stuff. Awesome vid

@jadevictorsen3874 2 ай бұрын

He sounded optimistic when reading the sheets he had in his hand

@jakethetamalejohnson1673 4 ай бұрын

I’ve never been so excited about a build on KZfaq before…..the 55’ is gonna be awesome!

@StayTunedTA 4 ай бұрын

Let's GOOOO, thanks for watching!

@gregblack8550 4 ай бұрын

Can’t imagine shifting a 55 at 8 grand. I’m sitting here pretending.

@gregblack8550 4 ай бұрын

Finney not going to like your small block running with that hemi.

@PistonsofFury 4 ай бұрын

@@StayTunedTAplease tell us you're backing this with a Jericho!

@hydrocarbon8272 4 ай бұрын

I'll bet Finnigan feels the same way, knowing this engine will be 50x more reliable.

@oggp5951 4 ай бұрын

Chris Wilson knows his stuff. So cool to see him on your channel. He dynoed my 402 LS on his pump and it made 649hp.

@waynetessier3058 4 ай бұрын

Hello curious what you are using for fuel?

@oggp5951 4 ай бұрын

@@waynetessier3058 VP C16

@royb.1441 2 ай бұрын

You could already tell that first 811 pull was gonna be good when the dyno op brought the load up and gave a quick head nod of approval....cause he saw the torque number it was holding after loading it up and knew right at that moment it was gonna be special. Bad ass....and a very smart dude to catch that before the run even started.

@corystansbury 4 ай бұрын

With the consistent quality of this channel and the people, the ability to buy stuff like this will become easier and easier. No way this doesn't keep growing like crazy. Like Cleeter, Derek etc., it's like hanging out with good friends.

@StayTunedTA 4 ай бұрын

We really appreciate the support!

@GregLanz 4 ай бұрын

Apparently I need a better class of friends

@NotJo4Ever13 3 ай бұрын

@@StayTunedTA I absolutely second this, I was introduced to your channel quite late, but even still I see nothing but progress you guys are kicking it

@ryanmalin 4 ай бұрын

8:45 Bill Grumpy Jenkens. Fucking legend

@StayTunedTA 4 ай бұрын

Absolute PA Legend!

@path1478 4 ай бұрын

@@StayTunedTA The Grump would have loved that engine.

@danmyers9372 4 ай бұрын

He was the first Pro Stock car/driver I ever saw in person. It was around 1971-72 at a match race in central CA.

@LocalCelebrity412 4 ай бұрын

Now this is what I’m talking about!! Super high compression, 400 inch , 8000RPM small block with a Dominator. You’re going to need a Jerico trans behind that or a faceplated tremec if you want to shift at the moon!! Always have great content. I love this!!

@StayTunedTA 3 ай бұрын

Oh for sure we are going to run a proper crash box!

@55cleon 3 ай бұрын

Faceplated Tremec 👌🏿!

@jtownisallyouneed 4 ай бұрын

Tony displaying the regular Italian two day growth between workshop and dyno

@mikeyeyes7 3 ай бұрын

🤣🤣🤣🤣

@jeadams2428 4 ай бұрын

"The internet is a weird place man!" Truer words have never been spoken! 😂

@BillyJoeJimBob28 4 ай бұрын

Yep, just wanted to say good score on the engine Tony. Without it, there is no fukin way ur gettin 820 horses in that guys engine shop! 🤔 🤣🤣🤣 (weird right?) 😂

@fks-pv8il 4 ай бұрын

I was laughing when he said that! 😂😂

@BIllMcCambridge 4 ай бұрын

Tony had the full emotion rollercoaster. I think I even saw him throw up in his mouth a little hahaha I know he drove all the way home with his jaws hurting from smiling!! Great job Tony gonna be killer. Please please please put a boom tube on the shoe box!!

@StayTunedTA 4 ай бұрын

Hahaha for sure!

@sarahdell4042 4 ай бұрын

We’ve all been there with a fresh build. It’s always pins and needles. Even worse when you buy a used high dollar motor from a stranger

@ronjones-6977 4 ай бұрын

@@StayTunedTA What a deal. I wonder what it would cost to build a 340 comparable to that. A high-spinning small block is like music to your soul.

@timschrock23 3 ай бұрын

Did I see you loading the 55 at Bristol at Freedom 500?

@edwardrucker5412 4 ай бұрын

When you guys build the headers, you should build them like they did in Nascar. Tuned, equal length, with the 4-2-1 stepped collectors with true boom tubes. It would sound amazing!

@d_rock_t 4 ай бұрын

You're projects continue to impress. Nobody does it like you Tony (and team). Keep it up.

@andyleblanc1564 4 ай бұрын

I am so jealous of that motor!! That 55 should be called “Moonshine”

@StayTunedTA 4 ай бұрын

I like it!

@mangomcpoo475 4 ай бұрын

@@StayTunedTA Ya and it revs to the moon!

@sambozeman5266 4 ай бұрын

Paint it black call it "shiner" cause it's gunna give out some black eyes on the quarter

@Charles-kg5fl 3 ай бұрын

@@sambozeman5266 I was thinking the same with a dark purple to black transition paint. Definitely "Shiner"

@guest6423 4 ай бұрын

Around '96, I took a bellhousing to a guy in Sun Valley, CA to have some tabs welded to it. It was in a packed, nondescript industrial yard, littered with rusty machine tools. Inside, I found him asleep, tilted back in an office chair at the welding table. Stacked 6" high, all around were cylinder heads, all NASCAR pieces. Turns out he was THE guy to weld up certain passages in order to make them reverse flow. His white beard came down to the edge of his welding helmet, and he said he hadn't trimmed it in over 2 decades. If you weld, you know why. Neat guy, and a fun experience for a car guy like me. Legends are everywhere, and if you stumble around, you'll find them.

@GRUMPYOLDSURVEYOR 4 ай бұрын

Love a good dyno session and the huge smiles on your faces looking forward to the build 🎉🎉🎉🎉🎉

@tomthomas4666 3 ай бұрын

Really enjoyed your video. I had the privilege of working with my father in a automotive machine shop for about 10 years. He was like this guy running the dyno he could figure out what was wrong before anyone else knew what was going on. He was a master mechanic, machinists, welder just amazing. I miss him so much he was my hero. All the young racers loved him he was always ready to help and teach them. They all showed up at his funeral to show their love. Just blew my mind how much the guys all loved him. Good luck with your build on the 55!!!!

@thomshere 4 ай бұрын

***You seem to be such a cool guy and car builder and thank you for letting us know how much this motor was. Not many people do that so I really appreciate it and I'm sure a lot of other people do as well. Btw, I really liked the vice grip garage build, that car is awesome, you guys did a great job! Man I wish I could find one like that. Thank you so much for all your awesome videos.***

@StayTunedTA 4 ай бұрын

Thanks so much for watching, we appreciate it!

@rodneyclark1990 4 ай бұрын

One video with Derek and a man can go shopping 😅 😂 lol

@LegitStreetCars 4 ай бұрын

Man that engine is seriously cool! Didn't know anything about these.

@misc_ 4 ай бұрын

Get one and put it in the TA lolol

@joshbillings7290 4 ай бұрын

Found you from the VGG collaboration. Subbed and excited for this build! Engine is a monster!

@CanadianClassicCarNut 4 ай бұрын

Stay Tuned is one of the highlights of my weekend. You never disappoint. Congratulations on your Dyno results!

@TonyS26 4 ай бұрын

Respect the sacrifices to make a project happen - a lot of us are very familiar with that feeling!

@StayTunedTA 4 ай бұрын

We do what we can for the people!

@J-Loe 4 ай бұрын

Dyno man is a crazy pro! what a great scientist to have in the chamber!

@stevekeelin5143 4 ай бұрын

Your genuine happiness about this motor is awesome! Can't wait for the videos on this project.

@DigitalN 4 ай бұрын

Tony I love watching your channel because of all the cool different projects you actually work on, not just buy to drive home and park it for 2 years. Keep it up man! Can’t wait to see what you do with the 55

@relco9825 4 ай бұрын

That. Noise. I can only imagine hearing it in person. Congrats on the purchase, Tony! What a wicked engine. Can't wait to see the build in the '55 with this beast!

@rdlangston13 3 ай бұрын

Go to NASCAR Cup race and hear 36 of them at full tilt at the same time

@robertbailey1515 4 ай бұрын

Your 55 is gonna be nasty with that engine and a stick, can't wait to see it together.

@drewc3964 3 ай бұрын

Love all the info that the old school engine builders have. Could watch them build and tune for daaaays! Stoked for your purchase!

@chuckmorris7553 4 ай бұрын

I've said it before, I'll say it again, the best channel on KZfaq. Your nervous excitement was great to watch! Engine looks and sounds amazing, hurry up and get it in the '55!

@billjenkins1416 4 ай бұрын

The excitement (and relief) after those small problems was awesome to see. Sounded great and will definitely be fun in the 55

@StayTunedTA 4 ай бұрын

Definitely a few bumps in the road but we made it happen!

@ooklamoc4411 4 ай бұрын

Such pros. Glad to see you hooked up with an insanely knowledgeable crew. Makes a scary purchase much more palatable.

@StayTunedTA 4 ай бұрын

Couldn't agree more!

@gordocarbo 4 ай бұрын

@@StayTunedTA WIlling to share roughly what it cost? Was it refreshed or just a pull out

@thomasceruzzi1871 3 ай бұрын

@@gordocarbo he tells you straight up what it cost in the beginning of the video. $12.5K

@gordocarbo 3 ай бұрын

@@thomasceruzzi1871 I missed it, thanks. 12.5kis a frigging steal for that engine. Got 6k more than that in a lousy Gen 1 383

@thomasceruzzi1871 3 ай бұрын

Yeah, I didn’t figure less than 20 used. Sounded stout too!

@dustinwalker8576 3 ай бұрын

I’m truly happy for this guy… Tony is one of my fav tv car guys, always real, and you can tell he is legitimately stoked to have an engine that any real gear head would dream of having! Congrats on the results, and can’t wait to see it in action!

@michaelmounts5652 4 ай бұрын

The best video you’ve yet I loved it. I think what put it over the top was watching you and how nervous you got when it was on the Dino and when you had those couple glitches you got real quiet great great video.

@Steelythestacker 4 ай бұрын

My man, that bowtie was singing my favorite song! Can't wait to see that in the car! Awesome motor. Just awesome.

@TJSpike 4 ай бұрын

Stay tuned just keeps getting better! Love those revs!!! HELL YEAH STAY TUNED BEST DAMN SHOW ON KZfaq 🤟🤟

@StayTunedTA 4 ай бұрын

Thanks a ton! We are working hard over here week after week but it's a blast!

@samrotheray5805 2 ай бұрын

I love the bibs man. I rock em as well. Awesome engine. Been watching for a long time. Good luck with the build.

@k-dawg3893 3 ай бұрын

Cool video! I'm here from NNKH's channel. I'll be watching your stuff in the future. That motor is an absolute beast!

@GearHead1258 4 ай бұрын

The best was when the dyno operator asked Tony, so what you wanna do now? Tony: I wanna unhook it and take it home in one piece 😂😂😂 smart man! This thing is going to be insane in your ‘55 with a manual. Can’t wait guys, keep up the great work. Awesome video, so happy for Tony and his buddies, the channel is taking off and only going to get bigger and better. That has to be a great feeling for Tony and his crew, knowing they took the risk and gamble of becoming successful in the KZfaq world, just so neat to see it all happen in front of our eyes. Keep rockin boys, we’ll keep watching! 🤘🏼🇺🇸

@StayTunedTA 4 ай бұрын

Man, it has been a ton of work, late nights, tons of energy and dollars invested but it's all been a labor of love and feels amazing that we are seeing a lot of growth here. Appreciate each and every supporter. Thanks

@GearHead1258 4 ай бұрын

@@StayTunedTAI’m sure bud, I’m not too far from you guys. I’m from Altoona, PA. I’ll keep supporting and spreading your content to fellow gear heads. P.S. Those Hendrick valves covers are so cool, I hope you keep them. Looks like they have a specific bolt pattern anyhow. 😂

@PatandDoopypoopy 4 ай бұрын

Lenco trans, plllleeeeaaaase.

@Nick-dh4gm 4 ай бұрын

Hi, Tony! Have followed you from your other TV show. You push the limits. I do not expect a reply, but had to comment when your video had “1955 Chevy” in the title. Your NASCAR engine small block is amazing- However, I could identify with your excitement- way back in 1970. My car did not have your NASCAR horsepower or modern tech. But- it had tilt - fiberglass front end, 55 hardtop, 4 spd, 4.56 gears, and a sb 350 Camaro engine; after using a Z/28 ‘0ff-Road service cam & springs, 12.5:1 TRW pistons, FI heads, and 780 Holley, balanced with flywheel- Redline was 9300rpm - On the street, There is something unique driving a 55, with instant explosive power in any gear. Keep shifting hard, Tony !

@StayTunedTA 4 ай бұрын

Dude, appreciate you following us to KZfaq! That '55 sounds like a real wicked car, and I would be stoked to have a rip in that thing! Thanks for the watch!

@stevebastiom255 3 ай бұрын

So much respect here, for all of you, especially dude behind the lever and the screen. Been a hot rodder all my life!!

@halfcentury1112 2 ай бұрын

I love how you guys can diagnose by sound!! so amazing

@robertedwards6438 4 ай бұрын

That dyno guy is thinking,never again 😂😂😂

@StayTunedTA 4 ай бұрын

Hahahah!

@lilsammywasapunkrock 4 ай бұрын

Video died right at the 675hp pull! Luckily you guys got it fixed without keaving me hanging too long, i just refreshed the video and finished it right away. 800hp is killer, that thing is going to be fun.

@StayTunedTA 4 ай бұрын

Sorry, little YT glitch, but we're back!

@shannonbunch1003 3 ай бұрын

Love the engine... Love your channel... And a special thanks to Wilson race engines, these guy's got their $h1T together. ..

@travispeoples 4 ай бұрын

My first hot rod was a 68 camaro with a solid roller 331 that peaked at 8,000 rpm with a tremec tko 600 5 speed... it was a riot and only 500 hp to the tire. I can only imagine what 811 hp would be like! Congratulations!

@mariocooldude9092 3 ай бұрын

I want a V-8 that will rev to the moon 😂

@hedlund88 4 ай бұрын

thats one rowdy engine god damn

@StayTunedTA 4 ай бұрын

Rowdy x10!

@BUILTFORDTOUGH79 4 ай бұрын

Amazing what a simple pizza will do for a crew of guys. Spirits instantly lifted! What a motor 😭… brings tears to my eyes hearing her on the dyno.

@klmorris1576 4 ай бұрын

TA this is a fantastic channel, the excitement and passion for the builds is incredible

@thedragon2299 4 ай бұрын

Congratulations, that's one killer engine! Loving the channel man! 🐲

@justion337 4 ай бұрын

What happened there? Video suddenly went private halfway through watching it?

@158158cow 4 ай бұрын

Yeah, not sure. Back in business, fortunately!

@FrankChevyGmc_from_BE 4 ай бұрын

Saw the exact same thing happening

@headlesskoopa 4 ай бұрын

I thought my TV turned off

@StayTunedTA 4 ай бұрын

Sorry ya'll, glitch with YT but we're back!

@frankevans1744 4 ай бұрын

yeah same no idea????

@optimusprimer4392 3 ай бұрын

I'm guessing you can say goodbye to the restrictor plate

@j2kinflarc768 4 ай бұрын

You definitely brought that engine to the right shop. The kind of guys with that kind of experience, knowledge, wisdom, and passion are getting rare. Even worse, fewer people are making the time to learn from them.

@DrBruhle 4 ай бұрын

Ive been watching you since the HRG days on motor trend. You and the boys put out consistent high quality videos. Hope you have continued success for many years to come.

@StayTunedTA 4 ай бұрын

I appreciate that! Thanks for watching.

@elvispresley6392 4 ай бұрын

Because it would be boring to just get a motor, throw it on the dyno and go home. What kinda' content is that ? A little suspense, mystery, problem solving, conclusion. Maybe a romance started. And the happily ever after. You guys rock . . . ✌️😎

@95turbostang21 4 ай бұрын

Man, I got screwed on having a 347 stroker built for me by 2 machine shops. The first machine shop that was supposed to do the job. Charge me $7600 to build one and they Screwed it up now at that point I couldn't just throw in the tail. I had all that money already spent on this motor so I had to take it to another shop to have them correct it. They charge me 3800. And still something doesn't seem right with the motor. Oh, I almost forgot that's not including $3000 on a forged rotating assembly. You can't trust machine shops today. It's a shame. Congratulations, Awesome Motor

@thomasward4505 4 ай бұрын

I think you have to check behind everybody period if you don't have the measuring tools buy them!

@Nick-dh4gm 4 ай бұрын

@@thomasward4505 Hate to hear of your experience; I was lucky to have a Chevy mechanic and racer, to help direct the parts and used a local racing machine shop, back in 1970- more difficult to trust, today and aftermarket parts can be unreliable.

@95turbostang21 4 ай бұрын

@thomasward4505 if I know what the clearances should be and have the tools, I would have checked

@timweb1510 3 ай бұрын

Name the two shops so others can avoid

@Clutch_Kick187 3 ай бұрын

Unfortunately your story is very common.. There are lots of guys that build one for themselves, and it works because the parts they bought just to happen to line up tolerance stacking wise.. They don't check clearances that should be checked and verifed, or proper cooling/oiling mods to stock blocks.. Then they think they can do it for others, but the tolerances don't always align and they end up tearing up lots of peoples stuff. I have had a few motors built, and I have always used shops that build motors for circle track/dirt racing. Those engine guys get lots of business, and know how to put an engine together that will sustain high hp, along with high rpm for a long time.. Not these drag builders that try and make a motor last a few seconds at a time, to then claim, "Well thats racing for ya".. I have always trusted circle track builders over drag builders no matter what my goal was..

@paulcombes3782 2 ай бұрын

Chris Wilson , legend ! I was hanging on his every word . Great engine man . Nothing sounds as good as an American made V8 at high revs .

@ballafasho332 3 ай бұрын

“That could be your problem… i got stuff to redo 'em” Gotta love working with a guy like that. Your stomach bottoms out because your watching your investment/baby carefully and things are going amiss, your not sure if they’re minor or major problems. Then you have a team of experts around with years of experience putting out any and all fires and getting you right back to life behind your project. Awesome video.

@Sharkuis 4 ай бұрын

This is going to be amazing, can’t wait to see more. As a fellow pizza aficionado, I have a shirt idea for you: Front: small pocket style “Stay Tuned” logo. Back: “Pizza team with a racing problem”

@StayTunedTA 4 ай бұрын

Might just have to do it!

@user-ic1tq5uj7f 4 ай бұрын

That small block sings! Super sick Tony, that thing is guarenteed to put a smile on your face! 👍 👍

@michaelcosgrove5758 4 ай бұрын

Love it! Great to see another one back on the road!

@richardaustinaustin1890 3 ай бұрын

Can’t wait to see this put together. Sounds amazing on the dyno.

@RoninDosho 4 ай бұрын

I'm so happy that you got this motor, Tony. 300K subs here we go. Congratulations

@user-fv8zo4ee7p 4 ай бұрын

That's gonna be great. I can't wait to see the video of you doing cool stuff in it. Great motor dawg. Happy Easter to you and yours.

@dtw322 4 ай бұрын

I'm pretty excited about this to get into your car. Great video! Thanks!

@bb7549 4 ай бұрын

Congrats on that motor Tony. That thing will be FUN. Man, it was cool to see Chris work on that dyno. That guy is legit. His ears are so well tuned he figures out the littlest noises instantly.

@orionfixr7713 3 ай бұрын

That was awesome!! Can't wait to see this in the car!!!

@anthonystefano1441 4 ай бұрын

Very cool, sounds unreal love it! Looking forward to seeing this run in the car! Onya tony

@realnikonlover6207 3 ай бұрын

What a jewel. Homerun on that engine buy. What a great shop and guys helping you out. Winning!

@smittyjones8755 Ай бұрын

Man, your enthusiasm was infectious, like damn I want to see this car run now.

@monkeyfoodgarden 4 ай бұрын

Liking what y'all are thinking for the 55. Old NASCAR moonshine runner vibe now your talking. Really like the channel y'all do amazing work. That motor is crazy. Can't wait to see this project done.

@dustysilvers7115 Ай бұрын

Holy shit I haven’t been that excited over a video in a min. That’s awesome guys

@billybarrow426 3 ай бұрын

Awsome! Can't wait to see this heartbeat rip some things up! 🤙😝🤙

@derekbelcher5363 4 ай бұрын

Tony I've been watching you since you popped up in automotive TV and I can't be happier for you. This engine is an absolute ripper and it will be awesome to see that 55 ripping around a track somewhere screaming through the boomtubes. Great purchase and start to another build series but don't forget we want to see how that v12 runs in the mustang.😅

@AnDrEw122100 4 ай бұрын

I spied that thing a while back in one of your videos and am stoked . Sb2.2’s are amazing. High rpm small block letsssss goooo!

@onlya3rd264 4 ай бұрын

I been telling my friends that I would love to have one of those nascar motors even after they ran it for a race forever. They are some badass engines. Good for you guys can’t wait to see it in your 55 with tires a blazing 🙌🙌🙌 awesome video thanks for the entertainment 👍

@benvickridge 3 ай бұрын

I just have one thing to say.. "Spicy" 😂 love it Tony & Barb

@chrishyde377 3 ай бұрын

I can't wait to see this going in the car and driving .....This is awesome !!

@reallybadaim118 3 ай бұрын

Nice piece. Looking forward to seeing the finished 55 with this motor.

@AnselmGidion 4 ай бұрын

Congrats on the engine Tony! Have had several automotive wet dreams over that setup.

@THEBULLETPROOFGARAGE 3 ай бұрын

Pretty damn impressive, Tony! Can't wait to see you get the '55 on the street with this monster! Scott

@joshdoesstuff78 4 ай бұрын

Man, that '55 is going to be killer. I'm looking forward to this build. Keep up the killer videos.

@GetInGetDone 4 ай бұрын

Love it guys! Can’t wait to see it in the car and on the strip

@itwoammend1735 4 ай бұрын

Almost exactly 2 hp per cube on the first real pull! That is going to be a fun car to drive! Can't wait to see it done.

@TomPauls007 4 ай бұрын

What a set of gearheads! cool. OOhh the sound of that mill pulling at 8K. Need to buy that DVD!!

@justinjames802 4 ай бұрын

There's a couple of guys here in Australia that have put these nascar motors in street/burnout cars. They sound absolutely astounding at full song!

@reggiemcdaniel1802 3 ай бұрын

Love this and always put your money in the engine. That is where the fun begins.

@MH-on8ol 3 ай бұрын

I was tensing up hearing that motor spin like crazy. What a beast, it will be big fun on the street and track.

@TheTeeroy32 4 ай бұрын

I'm so glad I was wearing my headphones for this one instead of just using the phone speaker, that sounded mad. That chevy is going to sound nuts, can't wait for that build.

@scotty197878 4 ай бұрын

What an absolute good ‘ol boy that tuner guy is! 👌 great to watch and he’s the sort of guy I’d be happy to trust with my stuff too 👍🇺🇸

@MikeY77z28 4 ай бұрын

Tony.Very cool choice of engine for your 55.With a manual trans.Awesome!

@edw7586 4 ай бұрын

Great content, great video, I really enjoyed that one, looking forward to seeing it rip in that 55. Yeeeooo

@chaselleprice2833 Ай бұрын

These guys were Intake specialist as my husband was telling me he dealt with them in the early to mid 1990’s when he was involved in drag racing. The work they do is like art work!

@WiringRescue 4 ай бұрын

After 8000rpm, I was laughing, covering my eyes, and peeking through my fingers. The dyno/engine knowledge of Wilson Racing guys is just nuts. You guys are really making a huge contribution to the car community with this content. Well done!

@derekbelcher5363 4 ай бұрын

I just had to come back and say im so excited about this build. Bad ass engine man

@chrisgramza8582 4 ай бұрын

There is only one word to properly describe this episode from start to finish... Bananas! Good on you fellas, what a ripper. Can not wait to see it in that 55... and I'm a Ford guy. That rollover black and white vid was a 57. See y'all on the next one.

@tptrsn 4 ай бұрын

Now THIS type of content is THE WIN!!! Hope you can make some absolutely epic videos with the moonshiner vibe '55 screaming through the woods, drifting and roosting. So stoked for it! Are you going to figure out how to run it on E85 so you don't have to keep loading it up with expensive race gas?