"I can't play because my character goes to the left. I guess I'm not talented." You are awesome dude :)
@GrownUpGamingGUG5 ай бұрын
Lol 🤣 Thanks! 👍
@Xmanant03_Mr035 ай бұрын
Make sure you put this video on an archive somewhere in case!! Awesome video👍🏻
@GrownUpGamingGUG5 ай бұрын
Thanks for the support😂
@marcosmos74782 ай бұрын
welp this aged well... Nintendo took down the other emulator lol
@GrownUpGamingGUGАй бұрын
@@marcosmos7478 lol, I think I made it after they took down the popular emulator 🤣
@marcosmos7478Ай бұрын
@@GrownUpGamingGUG yeah lol
@tenet58583 ай бұрын
This guy has the best tuturiols .
@GrownUpGamingGUG3 ай бұрын
Thanks for the comment 🙂
@valaris31796Ай бұрын
It's weird for me, I can run the games on ryujinx directly but then I cannot play it since the inputs is still active on desktops, so whenever I press a button in the game it also presses the button on desktop. In game mode when I try to run it it's not launching though, so I don't think it's a key issue since the game launches on desktop. What could it be?
@GrownUpGamingGUGАй бұрын
Try setting input settings in desktop mode but hold the start button for like one second and you should hear a light beep sound. That means your controls are now gamepad mode.
@valaris31796Ай бұрын
@@GrownUpGamingGUG thanks it's working, but when playing on desktop there is like 1sec input lag :/
@GrownUpGamingGUGАй бұрын
@@valaris31796 did you limit frame rate? Try disable any frame limit or any CPU or GPU limit. Switch emulation needs all the power it can get. I don't feel any input latency with my settings.
@valaris31796Ай бұрын
@@GrownUpGamingGUG oh I just had to switch to virtual deck controller and it worked. But then how can I also make it work in gamemod and not only on desktop, weird.
@GrownUpGamingGUGАй бұрын
@@valaris31796 try out different input settings. I think it's different depending on what your setup is. For me, in gaming mode, I have to use controller_neptune to get it to work.
@sergiako5 ай бұрын
Thanks! Please guide totk in ryujinx
@GrownUpGamingGUG5 ай бұрын
don't waste time, it's bad performance.
@btarg15 ай бұрын
You can get better performance with mods for both the game itself and steamOS (tweak utilities and the likes)
@GrownUpGamingGUG5 ай бұрын
yup, thanks for commenting :)
@LowEffortDoodles5 ай бұрын
thank u for doing it 💕
@GrownUpGamingGUG5 ай бұрын
Thanks for watching 😊
@effjay64474 ай бұрын
I have ryujinx as a standalone app and not emudeck + ryujinx on my SD and wanted to know if it's possible to add it to my sd library. I actually dont want to add it, but then i lose out on the performance metrics and refresh rate . Would really appreciate some tips. Great video btw!
@GrownUpGamingGUG4 ай бұрын
You could add the appimage as non-steam game and launch it there but I would just recommend installing emudeck and use steam rom manager included to create steam shortcuts that boot directly into the game from gaming mode.
@davidgarza99519 күн бұрын
@@GrownUpGamingGUG I added full GBA library to steam deck and with Emu deck added to my steam library no more desktop mode to run the games
@rolfwaerness3 ай бұрын
bro you saved my life i love you!
@GrownUpGamingGUG3 ай бұрын
Thanks for leaving a comment 🤗
@ThatBroski5511 күн бұрын
Hey Grownupgaming! Where do you get the mods? Do you have a site or a link you can send me please.
@GrownUpGamingGUG11 күн бұрын
@@ThatBroski55 gamebanana
@SANT14GO5 ай бұрын
is the Ryujinx performance still worse than Yuzu? When I saw comparison videos not only I was worried by the lower framerates, but mostly by the higher power draw
@GrownUpGamingGUG5 ай бұрын
last i heard was ryujinx focuses on accuracy while yuzu focuses on performance.
@SANT14GO5 ай бұрын
@@GrownUpGamingGUG I get how that could translate to fps difference, but is that also related with the higher power draw? Thanks for the help though, this is quite useful and now I'm checking out how to jump from Yuzu to Ryujinx
@GrownUpGamingGUG5 ай бұрын
i don't think there's a difference in power as i always max the performance. i don't do battery tests videos because i don't care about that. for emulation you would always want to maximize the power you got which is 15W on steam deck.
@didney_worl1725 ай бұрын
Yes, you can pretty much forget Ryujinx to even get the native switch fps.
@Banana_Knight10 күн бұрын
Thank you. My Switch is falling apart and my controllers have a little drift and the rails are super loose on the controllers and Switch where it will disconnect if you barley move it and reconnect and mess me all up while holding it. I put some tape on the bottom of the tablet part to kinda shimmy it when I slide the controllers onto it that helped a bit but now it's starting to not work with the connecting. It's almost 7 years old and I refuse to buy another one right now and wasn't gonna by another anyway unless they every did an office price drop but they never did and I wasn't gonna buy a dated piece of hardware at the same prices years later and have been holding out on the next system. LOL so this helps me play on my Deck now that isn't falling apart, just gotta get my saves over to it from the Switch if I can.
@GrownUpGamingGUG8 күн бұрын
Must of used the switch quite a bit 🤣
@Banana_Knight8 күн бұрын
@@GrownUpGamingGUG oh definitely.😂 I use to work night shift security at a college by myself when it was locked down and it was boring and I played my Switch on my shifts. Would also dock it to one of the monitors on the desk and play. Just do my rounds every 2 to 3 hours and sit at a deck and watch cams and play something to pass the time by. If I didn't have my Switch during those boring work hours I would have went crazy. 🤣
@kingseany94Ай бұрын
For a noob like me this was a simple and easy to follow video, thankyou!
@GrownUpGamingGUGАй бұрын
Glad it helped! 😁
@chaazaqlab46055 ай бұрын
Thx again for your help 😎👍 but can you please do a up to date XBLA tutorial? I've been wanting to play Marble Blast again 😢
@GrownUpGamingGUG5 ай бұрын
So you mean a guide for Xenia emulator? Or is it something else?
@MoorhuhnNilsАй бұрын
How do you open the ryujinx settings while in game?
@GrownUpGamingGUGАй бұрын
I set the back grip button to F11 key.
@MoorhuhnNilsАй бұрын
@@GrownUpGamingGUG How do i do that? Must have missed that if its in the video 🫣
@GrownUpGamingGUGАй бұрын
I probably didn't mention it as I have a keyboard so I just press the keyboard button. In gaming mode, when you have ryujinx launched, press steam button and go to controller settings, scroll down a bit and there's a toggle for enable back grip buttons. Then set one of those buttons to keyboard F11 key.
@MoorhuhnNilsАй бұрын
@@GrownUpGamingGUG thank you so much!!
@AI-Creations-LLC6 күн бұрын
I own the games that I use on my steam deck but I don't have a hacked switch.
@GrownUpGamingGUG6 күн бұрын
@@AI-Creations-LLC cool 😎
@erex099812 сағат бұрын
Same here. Though I do have a modded 3ds that I use for emulating everything that it can and then use my steam deck for everything elsd
@stracciatella27829 күн бұрын
You can spray some WD40 inside of the joystick on one pair of the joycons, that usually fixes it for a while.
@GrownUpGamingGUG8 күн бұрын
@@stracciatella2782 nah bro I'm not doing that 🤣
@stracciatella27828 күн бұрын
@@GrownUpGamingGUG there is also a second permanent fix (which is what I would do) and that is to buy replacement hall effect joysticks (Gulikit makes them) and swap them out with the intentionally bad ones inside of the joycons. Hall effect joysticks don't get stick drift because they're not based on potentiometers but instead they use sensors and magnetic fields so they don't wear out no matter how much you use them. They are also much more precise than your typical joystick and they do not cost a fortune.
@GrownUpGamingGUG7 күн бұрын
I just use 3rd party controllers or emulate.
@jayarmieimlani32144 ай бұрын
Thanks DJ Aoki
@GrownUpGamingGUG4 ай бұрын
Thanks for the comment ☺️
@Elijha223 ай бұрын
Are you gonna post a video on how to play with mods on Ryujinx or will the tutorial for Yuzu work for Ryujinx as well?
@GrownUpGamingGUG3 ай бұрын
Most mods just put inside the mod directory but you should always check the mod description on how to install.
@joramletlora80794 ай бұрын
Thanks al lot dude!!
@GrownUpGamingGUG4 ай бұрын
Happy to help
@AFLSuperCoachMastersАй бұрын
Great vid. When you go to bio checkers on emudeck does it have a ✅️ for Nintendo Switch? It says firmware missing despite following your directions. On v18.0 now What could be the cause of that?
@AFLSuperCoachMastersАй бұрын
Also it works in Ryujinx not in emudeck 😐
@GrownUpGamingGUGАй бұрын
Yes I get a tick. Emudeck has a folder location for bios. You should put it there.
@AFLSuperCoachMastersАй бұрын
@@GrownUpGamingGUG put the zipped or unzipped firmware in bios? Cheers legend
@GrownUpGamingGUGАй бұрын
Unzipped. Need those .NCA files
@AFLSuperCoachMastersАй бұрын
@@GrownUpGamingGUG appreciate you
@offbrandvizion98545 ай бұрын
I really appreciate people like you can you do ps3 next
@GrownUpGamingGUG5 ай бұрын
Here you go kzfaq.info/get/bejne/gLhzlceW3qfRmok.html
@Ellino884 ай бұрын
Thank you! is there a guide written somewhere on hotkeys for ryujinx? once i go fullscreen on deck, without a keyboard connected, it's almost impossible to go the settings of the emulator.
@GrownUpGamingGUG4 ай бұрын
F11 is toggle fullscreen button. I normally map that to one of the back buttons so I can access the menu if needed.
@Ellino884 ай бұрын
@@GrownUpGamingGUG seems a really great idea, how do you do that?
@GrownUpGamingGUG4 ай бұрын
kzfaq.info/get/bejne/eat_bMJ6prWpYmw.html I have a part in this video where I map one of the back grip button to the keyboard END key. You can do they same but with F11 key.
@Ellino884 ай бұрын
@@GrownUpGamingGUG thank you man, i've managed to bind the f11 key. The only problemi is that if i press it, it goes correctly to fullscreen. But if i press it again, it doesn't go back. So i've tried to bind on another back button the ESC but it just ask me if i want to stop the emulation. I can't find anywhere what button is needed to exit fullscreen.
@GrownUpGamingGUG4 ай бұрын
@@Ellino88 for me fullscreen toggles on and off when I press the key I binded to F11. I have a new video out soon and I demonstrate that in that video so stay tuned.
@didney_worl1725 ай бұрын
Problem when using the Steam Rom Manager is, you need to setup it again after every Ryujinx update. Or you will play on a "outdated" build with possible worse performance than a new build...
@GrownUpGamingGUG5 ай бұрын
are you sure? it's always pointing to ryujinx.sh so i don't understand how it will use an older build if you updated the emulator.
@didney_worl1725 ай бұрын
Oh, i didnt noticed it was the Emudeck version. I was talking about a "clean" .appimage installation
@GrownUpGamingGUG5 ай бұрын
Okay 👍
@SK1LAH5 ай бұрын
That joycon problem is globally called "stick drift" and its caused mostly by pressing stick (L3, R3 buttons) ✌🏻
@GrownUpGamingGUG5 ай бұрын
Yeah it sucks 😞
@SK1LAH5 ай бұрын
@@GrownUpGamingGUG I heard about fix of joycons stickdrift, you need to use paper. Google it, it can help you 😀
@GrownUpGamingGUG5 ай бұрын
yes i seen that. but with the technology we have today, i'm sure there's a better method. nintendo just gave us cheap materials even though we pay big bucks for those joy-cons. i'm pretty sure those joy-cons have enough margins to use better analogue sticks. and the problem was raised to nintendo many years ago.
@SK1LAH5 ай бұрын
@@GrownUpGamingGUG yeah, i understand You. Buying new pair of joycons every 3 months is not fun 😵
@CreamyQueso4 ай бұрын
Thank you so much for making this video. You are killing it! I just have one question. Ryujinx works in desktop mode but not gaming mode. I followed your instructions exactly. Everytime i boot a game up, it goes black then goes to steamos. When I go through Emulation Station is says it cannot locate the path, i chdcked the oath & it is correct. Any ideas?
@GrownUpGamingGUG4 ай бұрын
I don't use emulation station. I just use steam rom manager to create steam shortcuts. Maybe check the shortcuts?
@CreamyQueso4 ай бұрын
@@GrownUpGamingGUG Thank you for the reply, yeah I tried the parsers to make shortcuts & those won't boot up with Ryujinx. I saw on the EmuDeck reddit that many people are having this problem too. I wonder if there was a particular update that messed this up or something
@GrownUpGamingGUG4 ай бұрын
You can go into settings to fix it if there is anything wrong.
@ahmetgunduz26964 күн бұрын
how do i open the Ryujinx Menu in gaming mode, when i am in a game?
@GrownUpGamingGUG4 күн бұрын
I mapped one of my back grip buttons to F11.
@feliperamonespinoza2435Ай бұрын
I followed every step you did, however the game is like a cartridge and in blank is not identifying the game and im unable to play/run it i dont know what to do... any suggestions
@GrownUpGamingGUGАй бұрын
@@feliperamonespinoza2435 make sure your keys are updated.
@feliperamonespinoza2435Ай бұрын
I'm using 17.0.0 the same as you used... idk should I try with multiple? Cuz im frustrated it's been over a week watching videos and I can't not get it
@GrownUpGamingGUGАй бұрын
@@feliperamonespinoza2435 keys is different from firmware though. Update your keys.
@vinnyavalanche3 ай бұрын
thanx for the help
@GrownUpGamingGUG3 ай бұрын
Happy to help 😄
@longtherandomperson25845 ай бұрын
I have Ryujinx installed via emudeck, yet no "ryujinx" folder in the bios folder. What am I doing wrong?
@GrownUpGamingGUG5 ай бұрын
I'm not sure, my folder was always there. Can you create it yourself?
@buzzakina4 ай бұрын
same issue for me
@longtherandomperson25844 ай бұрын
@@buzzakina I created it myself, worked for me.
@buzzakina4 ай бұрын
@@longtherandomperson2584 thx
@Baldi_epikКүн бұрын
How do I play online I’ve been trying for ages but I can’t get anything to work
@GrownUpGamingGUGКүн бұрын
The emulator has an online option.
@Baldi_epik17 сағат бұрын
@@GrownUpGamingGUG thanks
@danig0l5 ай бұрын
What sites should I avoid visiting because they have illegal switch roms?
@GrownUpGamingGUG5 ай бұрын
Just don't actively search for them and you should be fine 😅
@korzins4 ай бұрын
in Yuzu my games have the correct version, but in Ryujinx I'm on 1.0.0. When I look in the yuzu folder, I don't have any updates. My game is already in version 1.6.0 with the DLC in Yuzu. Is there a Mod Manager for Ryujinx?
@GrownUpGamingGUG4 ай бұрын
Right click the game in ryujinx and select manage updates/dlc.
@Gamerstan80Ай бұрын
I got everything setup just can't find games 😢
@GrownUpGamingGUGАй бұрын
You put them in the roms directory and with the emulator point to the same directory.
@H_G201315 күн бұрын
Hi mate- my Ryujinx Input is not showing Steam Virtual Gamepadx it only showing Steam Deck(0)
@GrownUpGamingGUG15 күн бұрын
In gaming mode or desktop mode?
@H_G201315 күн бұрын
@@GrownUpGamingGUG before I go into Gaming mode. When I'm setting it up, the input option does not show Steam Virtual Gamepad
@GrownUpGamingGUG15 күн бұрын
Try setting it up in gaming mode. Set one of the back grip buttons to F11 to enter options in gaming mode.
@vasyapupkin54054 ай бұрын
Thanks for the guide. Unfortunately input setting you show don't work for me 😢 Amy ideas how to fix that? P.S. in game mode I do not have Neptune input, but the same steam virtual controller
@GrownUpGamingGUG4 ай бұрын
In desktop mode, press and hold the start button for 1 second and you should hear a beep. Your controls will be changed to gamepad mode and you do it again and you should be back to desktop mode.
@paulorg20114 ай бұрын
Thanks man, after that works here!
@GrownUpGamingGUG4 ай бұрын
@@paulorg2011 that's great :)
@TugennovАй бұрын
After going through the update process that you show, can the update file be deleted or does both the original file and update file need to remain in a Steam Deck folder? Thank you!
@GrownUpGamingGUGАй бұрын
After you installed the update you can delete the update files if you like.
@TugennovАй бұрын
@@GrownUpGamingGUG Thanks for the help! I should have mentioned that if I delete the update files, the game version number shown in Ryujinx goes back to 1.0. This is why I'm concerned that the update file needs to be kept in a folder on the device when using Ryujinx. This wasn't the case when using Yuzu.
@GrownUpGamingGUGАй бұрын
Sorry I was thinking about yuzu, yuzu installs the update. Ryujinx doesn't need to install the update, you just point it to where the update file is, so for ryujinx you don't delete the update file.
@TugennovАй бұрын
@@GrownUpGamingGUG Thanks for the clarification. Cheers.
@strider775Ай бұрын
When I go to add a game it gets added.. But then it disappears afterwards?
@GrownUpGamingGUGАй бұрын
Oh? Never happened to me. What do you think is causing this?
@strider775Ай бұрын
@@GrownUpGamingGUG I have no idea why it's happening.. Very bizarre indeed!
@darkjak6780Ай бұрын
For some reason my games won't show up I got the files uploaded and still don't see my games in ryujinx when I use Emulation Station it shows up however when I use it all it does it boot ryujinx
@GrownUpGamingGUGАй бұрын
For emulators, the key is to make sure the roms, bios, keys are in the correct location and the files are good 👍
@BloodCakez3 ай бұрын
Hi! I’m having a problem with the input options, the only two avalible are steam deck and steam keyboard, I don’t see a Neptune option, and I am unable to get settings to open once I’m in game mode, how did you manage to do that? I don’t have a bar on the top of my screen
@GrownUpGamingGUG3 ай бұрын
Does it work in desktop mode? Maybe try set it up there first.
@thiagophotografy2 ай бұрын
@@GrownUpGamingGUG i'm having the same problem. Cant control anygame and the only input optins are keyboard, steamdeck and steam virtual gamepad. None of them works :(
@GrownUpGamingGUG2 ай бұрын
@@thiagophotografy gaming mode or desktop mode?
@thiagophotografy2 ай бұрын
@@GrownUpGamingGUG both, and the buttons that i press keep messing with the interface too. If i press B on the deck, a menu pops out asking me if i want to close the game.
@GrownUpGamingGUG2 ай бұрын
@@thiagophotografy have you tried holding the start button in desktop mode? you will hear a beep within a second, that takes you to gamepad mode for your controller.
@DownUnder433 ай бұрын
The Firmware isn't installing its showing prod keys are missing but they are in the correct place and this error only appears when I try to install the firmware.
@GrownUpGamingGUG3 ай бұрын
Are you sure the keys are in the correct location?
@damagethis5 ай бұрын
Great video
@GrownUpGamingGUG5 ай бұрын
Thank you 😊
@damagethis5 ай бұрын
@@GrownUpGamingGUG I just followed the tutorial and it appears that both Yuzu and Ryujinz are gone, the app version in the discover store still works, but you need to set up, I wonder if you change the paths in steam it may still work through stean
@GrownUpGamingGUG5 ай бұрын
@@damagethis you sure? Haven't heard any news about emudeck taking ryujinx off. What version of emudeck are you on?
@damagethis5 ай бұрын
@@GrownUpGamingGUG I've just checked, my version is 214, for me I woke up this morning and Yuzu was not working, then followed your tutorial and Ryujinx was doing the same thing. But yuzu still works if installed via the discover store.
@damagethis5 ай бұрын
Sorry dude, it was my fault! I had my set up different to yours and placed my roms into a folder called switch rom on sd card. Having played with it for a couple of days I noticed that the roms have to be inside the roms directory/switch. It's all working now. Thank you for your video.
@ttl8me5 ай бұрын
Hi! Thank you so much for sharing a ryujinx/emudeck video tutorial. I was the one who message you with regards to the princess peach showtime not running in yuzu and you directed me to @steven.. Unfortunately, he only does mods for pc's and not steamdeck. But still I'm grateful for your help. Now I followed your ryujinx/emudeck video tutorial and I noticed that ryujinx is more picky when it comes to launching sw***h games. I tested some yuzu games that work, but in ryujinx will only reach the launch page and crash. But my goal is to be able to play princess peach showtime in ryujinx. Still no luck here, as I only get a black screen after launching the game in ryujinx.. Will still continue to search for possible solution in the net.. Please continue to share your tech know how with us so we can continue to enjoy playing video games... 🥰
@GrownUpGamingGUG5 ай бұрын
but the game runs fine on steam deck ryujinx kzfaq.info/get/bejne/l9SXkrSi2syZgXU.html
@ttl8me5 ай бұрын
@@GrownUpGamingGUG I finally fixed and was able to run Princess Peach Showtime on my Steamdeck! 😁 Credits to you for recommending me to check out @Stevens xD channel, and of course @Stevens xD! Apparently, there are 2 separate videos that I need to follow inorder to run this game. One is tweaking the graphics settings and the other is applying the mod patch. Although his video tutorials is for pc, it also works in Steamdeck.🙏
@GrownUpGamingGUG5 ай бұрын
Good job 👍
@shaxarts5 ай бұрын
How do you open the ryujinx settings while in game mode?
@GrownUpGamingGUG5 ай бұрын
please ESC, you can bind that key to one of the back buttons of the steam deck if you don't have a keyboard.
@shaxarts5 ай бұрын
@@GrownUpGamingGUG thanks! It works in desktop mode but not gaming mode
@GrownUpGamingGUG5 ай бұрын
i do it on gaming mode all the time and it works. use a keyboard or kde connect. many ways to get it done.
@thienthaicao7037Ай бұрын
I don't know why but i can lauch game in desktop mode but when i came back to gaming mod it can't run through steam shortcut
@GrownUpGamingGUGАй бұрын
@@thienthaicao7037 maybe issue with steam rom manager? You can do settings for the parsers. Maybe some settings are bad?
@ms1-Alex2 ай бұрын
How does the battery last while emulating switch?
@GrownUpGamingGUG2 ай бұрын
Depends on the game, less for games like totk and more for games like stardew valley. I don't do battery tests.
@ms1-Alex2 ай бұрын
@@GrownUpGamingGUG it could be an idea for another video
@GrownUpGamingGUG2 ай бұрын
kzfaq.info/get/bejne/nuBoqbhm1M3ZeWg.html but I just did a video explaining why I don't do battery test videos 😂
@ms1-Alex2 ай бұрын
@@GrownUpGamingGUG oh, nevermind
@GrownUpGamingGUG2 ай бұрын
@@ms1-Alex lol 😂
@Gamerstan80Ай бұрын
When ever I do the dlc or updates it doesn't qork for me on ryujinx
@GrownUpGamingGUGАй бұрын
How so? You point it to the nsp from the emulator and that's basically it.
@llive074123 күн бұрын
All good on my OLED but the only problem I have is when I'm playing a game the controls have input lag. Any tips please?
@GrownUpGamingGUG22 күн бұрын
I don't have any input lag with LCD model. Did you limit FPS, CPU/GPU clocks or tdp?
@Noaski55 ай бұрын
my imaginary switch keeps drifiting
@GrownUpGamingGUG5 ай бұрын
my actual switch drifts and i've bought 3 pairs of joy-cons already. i'm sick of it now. it's like a scam.
@Noaski55 ай бұрын
i also have a switch i was just making a joke@@GrownUpGamingGUG
@GrownUpGamingGUG5 ай бұрын
lol :)
@ramstab5 ай бұрын
Do you think suyu or ryujinx is better?
@GrownUpGamingGUG5 ай бұрын
Depends on the game. Just have them both.
@Goldenapegaming5 ай бұрын
I don’t see controller Neptune
@GrownUpGamingGUG5 ай бұрын
What do you see?
@Goldenapegaming5 ай бұрын
@@GrownUpGamingGUG it say handheld controller but it’s working now
@GrownUpGamingGUG5 ай бұрын
👍
@duriangc27173 ай бұрын
i tried to run super mario odyssey in ryujinx, but the gameplay is very slow, it's like playing the game in slowmo, tried it in suyu and everything just works perfect, any idea why ryujinx run the game slower?
@GrownUpGamingGUG3 ай бұрын
you can mess around with the settings to improve. ryujinx is focuses on accurate emulation whilst yuzu focuses on performance so some games might run better on yuzu.
@AceGamerXX2 ай бұрын
How do you change the buttons to where they are paired together? (A button, A command and so on) also, is there a way that you can change what each button actually does?
@GrownUpGamingGUG2 ай бұрын
Input settings
@blade122Ай бұрын
Joycons are connected and working, but no motion controls.
@GrownUpGamingGUGАй бұрын
@@blade122 I use steam deck controller and it has gyro
@Koncept-x2c2 ай бұрын
For some reason, when I go to emulation and BIOS, there is no Ryujinx folder, but it says I have it installed. I've tried reinstalling it, and the folder still is not there. Yuzu is, though.
@GrownUpGamingGUG2 ай бұрын
Where does it take you when you select open ryujinx folder in the emulator menu?
@Koncept-x2c2 ай бұрын
@@GrownUpGamingGUG it takes me to its original folder but it wasn't located in the emulator folder it was in the emudeck folder I guess it was an update
@GrownUpGamingGUG2 ай бұрын
So can you put your keys there and make it work?
@DarkShadowAy29 күн бұрын
Has the new update 361 broken launches for anyone? Ive tried reparsing but ryujinx launches instead of the title. Title refuses to launch :(
@GrownUpGamingGUG29 күн бұрын
Did you just change the settings for the original ryujinx parser or create a new parser?
@DarkShadowAy29 күн бұрын
@@GrownUpGamingGUG I did not. Tried a new install and parse again but no luck
@cadvph3 ай бұрын
Did you have this probme? steam deck controller not working at ryujinx for example in mario kart its even impossible get out the initial screen
@GrownUpGamingGUG3 ай бұрын
check the input settings. check it in gaming mode as it might be different from desktop mode.
@cadvph3 ай бұрын
The input of controller? In steam config or in game config of emulationstation
@GrownUpGamingGUG3 ай бұрын
input settings in the emulator. i don't use emulation station so that also might be the problem.
@ABC-gh2sv5 ай бұрын
I’ve been trying for days not to get a game running and it just won’t work, idk what I’m doing wrong and it’s driving me insane. I’ve watched video after video and none have helped me😭 the games won’t open and play. It shows up on my steam library but as soon as I click play it loads then just take me to the empty Ryujinx page. Even after applying folder. And it not empty because like I said it’s showing up in steam?
@GrownUpGamingGUG5 ай бұрын
Are you sure your keys are good? And in the right location? That's the only thing I can think of. Else you need to troubleshoot what's the issue.
@rapschnico2116Ай бұрын
Its a really good explanation video and everything works fine if i play splatoon. But the camera just goes horizontal and i have no idea why?
@GrownUpGamingGUGАй бұрын
Honestly I've never tried Splatoon through emulation 😁
@rapschnico2116Ай бұрын
I found the problem but thank you for youre answer
@GrownUpGamingGUGАй бұрын
Mind sharing so it may help others? 👍
@rapschnico2116Ай бұрын
Idk why but you have to activate motion control in the game and then you can use the diagonal camera.
@GrownUpGamingGUGАй бұрын
@@rapschnico2116 thanks for sharing! 👍
@Emulation_Inflation5 ай бұрын
Goodjob!!
@GrownUpGamingGUG5 ай бұрын
thanks for your continuous support! :)
@ShadDow21225 ай бұрын
I am having a problem, I did everything like you did but once I am inside the emulated game I can't use my controls :x
@GrownUpGamingGUG5 ай бұрын
Go to the emulator input settings to setup your controller.
@oogabooga910017 күн бұрын
My deck keeps saying it doesnt detect my prod.keys.. but i have a file of both keys in the correct folder in ryujinx.. Why is it not detecting??
@GrownUpGamingGUG17 күн бұрын
@@oogabooga9100 if you are confident the location is correct then maybe it's the file that's the issue.
@oogabooga910017 күн бұрын
@GrownUpGamingGUG okay so I'll try getting new keys then. Here's the curveball.. I can play all the switch games through ryujinx binary, i was even able to update the firmware upto date.... I just can't launch the games by themselves because it then says "no prod.keys detected" I can still play switch games if I launch ryujinx or pegasus... Not sure wtf is going on and why I have to use this extra step..?
@GrownUpGamingGUG17 күн бұрын
@@oogabooga9100 you can launch the game if you launch the emulator and then select the ROM you mean? Maybe your steam rom manager parser settings are incorrect so it's creating wrong shortcuts that can't launch the game directly? Just a guess.
@oogabooga910017 күн бұрын
@GrownUpGamingGUG Okay I'll try to figure it out. Maybe you can help me with another problem lol sorry... When I'm going into ryujinx settings to play certain switch games I can't find the steam virtual gamepad anymore... Where did it disappear to?!?! Or how do I enable it again?!?!
@GrownUpGamingGUG17 күн бұрын
@@oogabooga9100 sometimes it shows steam deck controller or controller_neptune for me. In desktop mode, if you press and hold the start button for around 1 second it will beep and change the controller to gamepad mode which is also different. Check it out.
@lesgagnon87405 ай бұрын
Great video but I am pretty sure it won't be long before we lose Ryujinx as well :(
@GrownUpGamingGUG5 ай бұрын
We will see 🙈
@bohiles4 ай бұрын
Thank you!!
@GrownUpGamingGUG4 ай бұрын
You're welcome! :)
@dewitrobbie4 ай бұрын
Hi, my controls don't work. The game boots up fine on the steam deck from it's own menu, but my controls do not work. In your video you go to the input settings, and then your video swithes to the zelda game to show us to change the input from gaming mode. Did you start the game in Ryujinx, or in Steam? In Ryujinx I can get the game to work (really slow) with controls working, but not when I boot up the game from Steam?
@GrownUpGamingGUG4 ай бұрын
Like I showed in the video, you might need to setup the input in gaming mode as for me, in gaming mode, the input is changed to controller_neptune in gaming mode.
@dewitrobbie4 ай бұрын
@@GrownUpGamingGUG Thanx for the quick reply, but there is no controller_neptune for me visible? Only keyboard, steam or virtual steam i think. Its for Mario Bros wonder, by the way. I will have another look at it later today
@GrownUpGamingGUG3 ай бұрын
Did you try steam or virtual steam in gaming mode? For me I get controller_neptune in gaming mode and I use that and works fine with gyro controls too.
@user-nr9uy4rn6t4 ай бұрын
I can’t find Ryujinx in the bios folder but I have it installed???
@GrownUpGamingGUG4 ай бұрын
What about open ryujinx folder button on the emulator?
@user-nr9uy4rn6t4 ай бұрын
@@GrownUpGamingGUG still cant find it
@GrownUpGamingGUG4 ай бұрын
Did you click open ryujinx button or did you not find that?
@user-nr9uy4rn6t4 ай бұрын
@@GrownUpGamingGUG couldnt fnd the ryujinx folder in the bios or roms all together
@GrownUpGamingGUG4 ай бұрын
@@user-nr9uy4rn6t open the emulator, click "file" and "open ryujinx folder".
@mynameismal1Ай бұрын
hi mate, checked the rom folder settings but my screen just shows no games in ryujinx but the do parse into steam
@GrownUpGamingGUGАй бұрын
So the roms folder and the parse games folder are different?
@sharozemalek991Ай бұрын
Well, I didn't think so but I've now gone to installing ryujinx straight to steam and added roms to rom folder ... still no show
@sharozemalek991Ай бұрын
Both keys and firmware are both v18
@GrownUpGamingGUGАй бұрын
sorry i don't think i understand. did you say it parse into steam with steam rom manager? do you can run the games with the steam shortcut in gaming mode right?
@sharozemalek991Ай бұрын
Correct i parsed them but then they still wouldnt run from steam .. keeps opening ryujinx @@GrownUpGamingGUG When I look in ryujinx I don't see thr games like you do in your video
@smithy15785 ай бұрын
Do you have any guides to get the best performance for totk on Ryujinx?
@GrownUpGamingGUG5 ай бұрын
It's still bad, use yuzu for totk.
@autoxguy2 ай бұрын
Is the emudeck version of ryujinx and the standalone version the same thing? I know there is a flat type and I forget the other type.
@GrownUpGamingGUG2 ай бұрын
I think they are the same.
@ttl8me5 ай бұрын
I have a yuzu question.. When I was tinkering the yuzu settings to run Princess Peach Showtime, I kinda messed up the settings and now the touch control is way off. When I play a yuzu game, the touch control is like 2 inches to the left of where I touch the screen. I check the yuzu settings and there is a "reset all settings" button. I'm having second thoughts clicking it as it might messed up even further. Is there a way to reset the settings for an individual game and not all the yuzu games in my collection? Like if I right click a game then try to reset that game only? Thanks!
@GrownUpGamingGUG5 ай бұрын
Input settings are per game basis to my knowledge.
@carlsmtb31714 ай бұрын
Any ideas why create parser would be missing from emulation station, I see everything else
@GrownUpGamingGUG4 ай бұрын
I use steam rom manager.
@carlosmelendez83172 ай бұрын
Can the updates and dlc be deleted after adding the files to Ryujinx and also will the updates show up in gaming mode?
@GrownUpGamingGUG2 ай бұрын
Don't put the updates or dlc in the same folder as the roms if you don't want them to show up in gaming mode. Also, you don't need to install them, just put them in a folder and point to them in the emulator, you can toggle them on or off.
@carlosmelendez83172 ай бұрын
@GrownUpGamingGUG But can they be deleted after saving in Ryujinx or do they need to be somewhere in a folder to work?
@GrownUpGamingGUG2 ай бұрын
They aren't saved or installed. You just point them like how you point to your roms. So no you don't delete them.
@BootyCollins-gf5er2 ай бұрын
keep them in the patches and dlc folder for ryujinx
@yegui472 ай бұрын
does anybody know the link to get the keys? i just want to be sure to avoid download them. i dont want that, its illegal
@GrownUpGamingGUG2 ай бұрын
I'd like to help but it's really against the rules. Google is your friend.
@melissameloche46163 ай бұрын
In game mode, when I hit esc to pull up settings, I instead get a pop-up window asking if I want to stop emulation. No options pop up, even if I say yes, game only freezes. Any idea?
@GrownUpGamingGUG3 ай бұрын
Don't use ESC, use F11.
@melissameloche46163 ай бұрын
@@GrownUpGamingGUG Hmm that works right after I hit play, while the game is still loading, but as soon as the game actually starts, the bar goes away. Thanks for the response too, I’ll see if I maybe need to reinstall.
@GrownUpGamingGUG3 ай бұрын
@@melissameloche4616 I'm not sure if this is the problem, but try enabling developer mode in steam deck settings > system.
@luke96342 ай бұрын
for some reason i don't have a Ryujinx folder and i even reinstalled it
@GrownUpGamingGUG2 ай бұрын
It should be there
@ThizizKenny2 ай бұрын
Same here
@didney_worl1725 ай бұрын
Is Ryujinx even worth it on SD? I saw comparisons vs Yuzu and Ryujinx had 50% less fps... Maybe some Yuzu fork would be still a better choice than Ryujinx? Can Ryujinx run MK8 stable 60fps and RDR1 stable 30fps?
@GrownUpGamingGUG5 ай бұрын
depends on the game. some games don't run well on ryujinx and might do better on yuzu.
@Moutopher5 ай бұрын
In game mode, all I get is a black screen when opening a game
@GrownUpGamingGUG5 ай бұрын
www.reddit.com/r/SteamDeck/comments/zsezts/ryujinx_black_screen/ see if this helps
@virginiafenderhead24494 ай бұрын
How to install updates and dlc to microSD? Not the system memory.
@GrownUpGamingGUG4 ай бұрын
Ryujinx doesn't install the updates or dlc, so you just put the files on the SD card and then just point it to that location on the emulator.
@ckelley32873Ай бұрын
Is there a way to get a cheat /trainer engine for the switch games?
@GrownUpGamingGUGАй бұрын
You can just use the built-in cheat function with the emulator. You can use cheat codes or cheat patches.
@ckelley32873Ай бұрын
@@GrownUpGamingGUG Thank you . Any good place you recommend to get patches/etc for existing titles I already have?
@GrownUpGamingGUGАй бұрын
Game bananas have a lot of mods and cheats.
@ho18322 ай бұрын
Once im in gaming mode none of my controlls work and im not able to go into the Ryujinx settings menu, how do I fix this?
@GrownUpGamingGUG2 ай бұрын
F11 to get the settings menu.
@ho18322 ай бұрын
@@GrownUpGamingGUG I binded F11 to one of my buttons but it still refuses to work
@ho18322 ай бұрын
I got it to work but do I always have to re add my games to steam incase I add mods or update them or does it do it automatically
@GrownUpGamingGUG2 ай бұрын
@@ho1832 what do you mean? Just add it once, I've never had to re add anything.
@rezpectionxd76532 ай бұрын
Can i use my switch controllers to play games like just dance or taiko no tatsujin with a friend?
@GrownUpGamingGUG2 ай бұрын
i think so but i've never tried playing like that.
@carlosmelendez83173 ай бұрын
When I go to select the game to load it seems like it takes forever to start the game in ryujinx emulator. Is there a proper way to launch the games so they will start faster? Like, do I double click the game or which button selects the game in ryujinx to start it?
@GrownUpGamingGUG3 ай бұрын
How long are we talking about?
@carlosmelendez83173 ай бұрын
@GrownUpGamingGUG several Minutes. I assume it's normal for it to take awhile to boot.up a game?
@GrownUpGamingGUG3 ай бұрын
@@carlosmelendez8317 several minutes to boot into a game isn't normal. Maybe check the settings though there isn't much for the emulator. Maybe the steam deck settings, did you turn down the tdp or CPU cores?
@carlosmelendez83173 ай бұрын
When I Parse in Emudeck I get 2 versions of the game. 1 for the game and another for the update. How can I prevent the update from showing up on the parsed categories?
@GrownUpGamingGUG3 ай бұрын
Don't put the updates in the ROM folder.
@carlosmelendez83173 ай бұрын
@GrownUpGamingGUG OK that makes sense. Once I apply the update to the base game can I just delete the update file?
@GrownUpGamingGUG3 ай бұрын
@@carlosmelendez8317 ryujinx doesn't need to install the updates. Just put the updates in a different folder and in the emulator, right click the game > manage updates > browse for the file.
@carlosmelendez83173 ай бұрын
Have you had issues of some textures popping in and out on some games? Do you have a fix for that or games that freeze during cutscenes or loading?
@andrielmontenegro20274 ай бұрын
if I download the roms in the USA without a VPN, will I get notified by the internet provider?
@GrownUpGamingGUG4 ай бұрын
It's illegal to download roms. I don't live in the USA so I'm not sure about that but some people tell me that's what happens.
@3dvortex0013 ай бұрын
Hi thanks for the tutorial! I did all the steps but when I went to game mode and launch a game it didn’t launch but just opened the riujinx and i couldn’t press any button, any ideas ?
@GrownUpGamingGUG3 ай бұрын
So it worked on desktop mode?
@3dvortex0013 ай бұрын
@@GrownUpGamingGUG it launched the game but I couldn’t control it :/
@GrownUpGamingGUG3 ай бұрын
Set the input settings.
@3dvortex0013 ай бұрын
@@GrownUpGamingGUG Thanks a lot for always being so responsive man!!
@LionelLim-xk7nd3 ай бұрын
Does it mean we will need a switch controller/joycon to play switch games?
@GrownUpGamingGUG3 ай бұрын
No I use the steam deck controller.
@itzdcx79915 ай бұрын
I wont be surprised if Nintendo goes after KZfaqrs for Posting tutorials cus even if you think it's okay they don't care
@GrownUpGamingGUG5 ай бұрын
if making a guide on using a tool that's available on the internet is wrong then i would gladly take the video down.
@Luinnycorp2 ай бұрын
Can you do an update version because i force restart my deck and when i install emudeck looks different doesn’t show on the steam library and the keys and firmware is not reading need help please😢
@GrownUpGamingGUG2 ай бұрын
Sorry what seems to be the issue? For it to show up in the steam library you need to use the steam rom manager. firmware and keys for the emulator is still the same location.
@Luinnycorp2 ай бұрын
@@GrownUpGamingGUG here the problem emu deck don’t show on the steam launcher app and cant play games because don’t recognize the controllers is there a way i can send you images and you can see for yourself
@GrownUpGamingGUG2 ай бұрын
Join my discord
@marcosantoniozaghetto73703 ай бұрын
how you show the stats (fps, cpu, gpu and others) in the top of your game?
@GrownUpGamingGUG3 ай бұрын
in gaming mode, press the three dots button > performance tab > performance overlay level
@renandstimpyfreak6724 ай бұрын
I seriously do not know what I'm doing wrong. I have my keys in three different locations on my Deck and Ryujinx is still not finding them. Am I doing something wrong??? Edit: I'm trying to install my dumped firmware, but no matter what I try it says that it cannot find my keys, despite them being in the Ryujinx install folder, and in Emulation\switch, and even from my Switch's own microSD card
@GrownUpGamingGUG4 ай бұрын
Are you sure the keys are correct?
@renandstimpyfreak6724 ай бұрын
@@GrownUpGamingGUG Yes I have. I dumped my keys through Lockpick_RCM, just like normal. Both prod.keys and title.keys. But I'll make sure I have the latest version of L_RCM and I'll try everything again. It works on my computer just fine, but not my Steam Deck for some reason.
@renandstimpyfreak6724 ай бұрын
@@GrownUpGamingGUG I went back a few days ago and made sure to dump my SysNAND keys and my EmuNAND keys... beginner's mistake. I feel stupid
@GrownUpGamingGUG4 ай бұрын
@@renandstimpyfreak672 glad it all worked out
@sevenseven349718 күн бұрын
У меня действия срабатывания нажатия с задержкой. Кто может подсказать как это исправить?
@GrownUpGamingGUG18 күн бұрын
Did you limit FPS? That might cause input latency.
@sevenseven349718 күн бұрын
@@GrownUpGamingGUG я пока только в режиме рабочего стола запускал, но я не знаю как поставить ограничение fps там.
@sevenseven349718 күн бұрын
@@GrownUpGamingGUG Thanks more, it worked, but for some reason I have fps 20.
@demondword47135 ай бұрын
This isn't a guide to piracy wink wink
@GrownUpGamingGUG5 ай бұрын
No wink wink, it's not about piracy. 😁
@demondword47135 ай бұрын
@@GrownUpGamingGUG I know it was just a joke
@GrownUpGamingGUG5 ай бұрын
@@demondword4713 I wasn't serious either wink wink
@autoxguy2 ай бұрын
So I just setup ryujinx with the 17.0.0 firmware and tried to run metroid dread with it's game update. When I click run the game it tries to load but then freezes and crashes. I have tried with both the vulkan and opengl gpu api. Any thoughts on what would be causing the crash?
@GrownUpGamingGUG2 ай бұрын
Make sure the keys, firmware and roms are good.
@autoxguy2 ай бұрын
@@GrownUpGamingGUG The keys I am using are supposed to be for firmware 17 and the rom itself should be good too but maybe that is my issue. It might be the Rom itself cause I tried another Rom from a different location and it worked fine.
@LianCasablacks2 ай бұрын
@@autoxguyDid it ended up working?
@autoxguy2 ай бұрын
@@LianCasablacks yes, I think it was an issue with the rom. But yeah it's been working fine now.
@yoonvsaechao5 ай бұрын
So uh most of us here are cause of yuzu being pulled right ehe
@GrownUpGamingGUG5 ай бұрын
Most likely
@MoBro-mf5tg4 ай бұрын
@@GrownUpGamingGUGare you using SD lcd or oled ?
@JaviiFarias5 ай бұрын
Quick question, is there a reason why you are playing Hogwarts Legacy on Ryujinx and not normally the PC version?
@GrownUpGamingGUG5 ай бұрын
I don't. I was just curious how it performs.
@JaviiFarias5 ай бұрын
That's what i thought , thanks for answering@@GrownUpGamingGUG
@ladyspurs3 ай бұрын
Do I just put my sd card from switch into my sd. Or get info from games on switch.
@GrownUpGamingGUG3 ай бұрын
You need a modded switch to dump your games.
@FarmerJoe-fs4nv3 ай бұрын
Hi so 2 things, 1: I am trying to play RDR1 on Ryujinx emulator, it boots normally but I cannot get past the menu as if the buttons don't work. 2: When I press Add Games/Parse, I get a pop up saying "Enabled parsers returned no apps". I have checked that both "Emulators" and "Ryujinx Switch" are both enabled and that the game also works normally but I cannot fix this issue.
@GrownUpGamingGUG3 ай бұрын
I think you need to fix your setup as I played that game day 1 without any issues with ryujinx kzfaq.info/get/bejne/p5emi9mqzrrIgnU.htmlsi=fVkT7A7V2ZeM9KYk
@FarmerJoe-fs4nv3 ай бұрын
@@GrownUpGamingGUG yeah, I'm gonna reset and setup once more and see if there is any changes, I'll let you know if the issue persists
@FarmerJoe-fs4nv3 ай бұрын
@@GrownUpGamingGUG I'll also look at that video and follow anything you did and see if the same thing occurs
@FarmerJoe-fs4nv3 ай бұрын
@@GrownUpGamingGUG Also another thing, I got to play it in desktop mode, however the input delay was massive, a whole few seconds before it registered my input, is this normal for desktop or is this just another result of my setup?
@GrownUpGamingGUG3 ай бұрын
@@FarmerJoe-fs4nv I didn't notice any input lag when I played but I don't play in desktop mode. Mostly just for testing the game and then I will play in gaming mode. In gaming mode, I set up input to controller_neptune.
@Breakthelimitsx27 күн бұрын
how to exit ryujin fullscreen
@GrownUpGamingGUG27 күн бұрын
F11 or esc, can't remember which one.
@lovasteam13835 ай бұрын
Hello! Thank you for your deck test videos! Could you please try Alan Wake 2 newest update on deck? They say that it gives a small perfomance boost, but it depends on the hardware. I wonder how it will perform on Deck
@GrownUpGamingGUG5 ай бұрын
If you like Alan wake 2 and want to play on steam deck with good performance check this kzfaq.info/get/bejne/jbWUipCZkta9laM.htmlsi=AmG4dimNagg5aceC
@lovasteam13835 ай бұрын
@@GrownUpGamingGUG I'm, in fact, the guy from the comments who you helped launch the game on Deck! XD and even with the mod it runs disgusting. I just hoped there'll be some miracle with a new update for a game...
@GrownUpGamingGUG5 ай бұрын
Hey, great to hear from you again! If I have time I'll try it out. Why don't you try it?
@lovasteam13835 ай бұрын
@@GrownUpGamingGUG i have few memory problems rn, and don't have enough free space. But it's actually a pain in the... To do so, so do it only if you really have nothing more to do, thank you!
@GrownUpGamingGUG5 ай бұрын
@@lovasteam1383 yes, I've already deleted the game so it would be a pain to set all that up again. Maybe later I'll try. So did you complete the game?
@MeowMourMeta5 ай бұрын
Did you play bayonetta 3 on ryujinx? Is there any way to fix cutscene desynchronization?
@GrownUpGamingGUG5 ай бұрын
No I haven't, does it work better on yuzu?
@MeowMourMeta5 ай бұрын
@@GrownUpGamingGUG idk, i playing it on ryujinx and except of desync, game goes with good fps, but desync is annoying
@GrownUpGamingGUG5 ай бұрын
Maybe try to play it on yuzu and see if the problem is still there.